Portege R600 - Windows 7 switch backlight does not

I have a new Portege R600, comes with Windows 7 32 bit and the switch on / off for the backlight does not work.
I installed the new VFR package, until I uninstalled the old. Also the latest version of the Bios.

Use the support Toshiba button and placed in the file backlight.exe, still does not work. If I tap the backlight.exe file manually, it works.
It is not a problem of material, as told in the hard drive of my old R600 with XP Professional and works of button.

What can I do?
Toshiba support is not able to help, to talk about the new facility, but is the original unchanged.
Maybe in the button holder, I put in an option in the empty file?

> Switch on / off the backlight does not work.
AFAIK some BIOS versions contains the additional option to enable and disable the lighting.
Please check if the lighting is not disabled in the BIOS.

I also searched this forum for some tips and found this thread:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=127192

Check it!

Tags: Toshiba

Similar Questions

  • Portege Z830 - Windows restart issue - it does not completely restart

    Although I now use 8.1 this problem has occurred with previous versions of Windows.

    When I click on restart, the machine closes as expected, but does not restart completely.
    The flash Toshiba screen does not appear, so that the Windows logo.

    At this point, it crashes and the fan accelerates at full rate, with only the logo on the screen.
    The version of the BIOS is Toshiba 3.90.
    8.1 setting often issues calls for a restart and I would be happy to not always having to do it manually.

    Thanks in advance

    Windows 8.1 does not perform a full stop down by default.
    It access the hybrid stop mode.
    I think that you should just disable this mode in Windows power options
    Maybe it would improve the functionality of the system s notebook.

    Here is a statement that shows you how to do this:
    [Make a full stop in Windows 8 or 8.1 Win | http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm]

  • Portege R600-10 q - SD cards does not always work

    Hello

    I have a r600, but there seems to be a problem with an sd card,

    2 GB SD cards bed perfectly, but if I put a 16 GB SDHC sometimes read, sometimes not...

    When I put the 16 GB sdhc and the pc recognize, if I try to paste a folder of movie with 4 GB, it pops up an error message saying something about «error semaphoro...» »

    Anyone know what this means?

    Thank you

    The Portege R600 supports up to 2 GB SD cards and SDHC cards up to 16 GB.
    So it should work, but have you tried to format the cards with the Toshiba SD card utility?

    Last but not least try to update the driver for the card reader that you can find on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  • 3570c, backlight does not come on

    I'm scanning of slides. The backlight does not illuminate. How can I get to this light.

    Thanks for your reply.  Software HP for the 3570c does not work in windows 7 so I use an old computer for this.

  • I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen "select the driver to install."

    Device drivers for a Win 7 install on Ubuntu system

    Hello

    I bought a Toshiba Portege M400-S5032 tablet PC reburbished that came with Ubuntu installed.  I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen 'Select the driver to install' with no option. Because it is not find Windows device drivers, I went to the Toshiba site to see if I could download a full game, but I can not...  So, how do you get drivers for Windows can install (or y at - it another way to work around it)?

    Thank you!

    The bios on fail safe defaults options are?

    It will probably take the raid driver

  • Windows 7 search () still does not work.

    Although I followed other dialogues forum on the subject and tried all the suggested solutions, Windows 7 Search still does not for me. It will be as stuff in Control Panel etc, but never files and documents.

    Here's what I've done so far: -.

    1. Run the troubleshooter of Search & Indexing, say things that I can't find the files or by e-mail. It detects any problems.
    2. In Control Panel / programs and features, I checked that Windows Search is turned on. (The Indexing Service is turned off).
    3. In Control Panel / folder Options, I checked that the default values of the research are defined.
    4. I tried to rebuild the Index in Control Panel / Indexing Options.
    5. I looked for the wandering registry key mentioned here: http://social.answers.microsoft.com/Forums/en-US/w7files/thread/cc378149-8765-498a-9480-b1b494e1a1a9 my system does not have it.
    6. I checked that the files (for example, "My Documents") have set of permissions system.
    7. I tried to switch to a different account username and research, which also do not work.
    8. I compared all the settings on my desktop PC (that has the problem) with my laptop, which is also running Windows 7 Home Edition, and on which the search works very well. They are all the same.

    What can I try?

    Hi, Rob.

    I worked my way through all the tips, but could not solve the problem. (I do not stop my AV - Avast - as it is also used on my laptop, which has never had a problem.) Finally I, reluctantly, created a new profile and copied all my files across, and search now works as it should.

    Best regards

    Richard

  • TouchSmart HP ENVY 15-j104ea N: BIOS Corruption and Windows Logo + B is DOES not

    Hi guys,.

    I recently got a BIOS corruption this morning based on the indications of 2 key CAPS LOCK flashes. This happened after an accident caused by an UPDATE and a QR code on the page.

    I tried to use the resolution by pressing the logo WINDOWS + B, but it does not work. Is it because of Windows 10 or?

    Kindly help me with this problem. Bravo guys.

    Bloody solved the problem. Kudos to this video. https://www.YouTube.com/watch?v=_aYhDdhcpcA

  • Tecra A4: Display backlight does not work

    Hi all

    Thank you for taking the time to read this. I came across a dilemma. My sister laptop screen broke (baby) and it was far from always being in warranty and we had not assured him. So I bought a new screen for it and it mounted fine. When I turn on the laptop, I can hardly do anything on the screen as if the backlight does not work.

    I see that it is there, it's just very very dark. I thought this would be a problem with the inverter. So I bought a new one of those too, but alas, it still does not. I can do all things beautiful to display on an external monitor via the VGA port.

    Someone at - it ideas?

    Thank you once again

    Danh

    Hello

    I understand you want to save money, but especially help the technician is most recommended as repair by yourself.
    In any case, as mentioned, you should be sure that the cable has been connected in the right way.
    You must connect the LCD/FL cable to connector LCD/FLand connect the cable to connector HV HT. Place the module LCD, the FL inverter board in the correct position.

    Good luck!

  • Driver Ethernet for Windows XP Home edition does not work on Satellite A100

    Satellite A100-784 PSAANE-02L011G3 ethernet driver for Windows XP Home Edition does not work. Cannot successfully install driver, downloaded all the drivers and still does not.

    As a sign of Device Manager yellow. I bought my laptop with Vista BASIC and I put XP - SP2. Country is Croatia! Help me please!

    Hello

    I can't believe that you are not able to install the LAN on this Satellite A100 driver!

    However, the satellite A100-784 supports a chip 82562GZ Intel 10/100 Mbit (Ekron) of Lan.

    If you want you can download and install page Intel network driver:

    http://Downloadcenter.Intel.com/Product_Filter.aspx?ProductID=999&lang=eng

    You will find the drivers Intel 8256 x Ethernet controllers

    Good bye

  • Windows 7, update services does not work

    I have a problem to update software in windows 7.

    I have a HP G72 laptop.

    I replaced my hard drive. 350GB, Western Digital 750Go digital West.

    -J' made an image of the C partitie (if it is 3 months, installed for the recovery partition, new updated worked after that).

    The new disk hard there however any possible updates of windows. (the bar is red on the left).

    -After that, I reinstalled the original image when the laptop was new (DVD image). Same result on updates.

    -Remove the folders from the dir c/windows/SoftwareDistibution, no results.

    -Checked the status of services: windows update is statred and in automatic mode.

    N ' tried microsoft 'Fix - it' no results.

    -updated the drivers intel, no results.

    -Downloaded System Update Readiness of windows to resolve the error (Windows6 1 - KB982018 - v3 - x 64). When installing, I get the error 0xc8000247. So I'm not able to install this software.

    Looked after errors in the CBS.log newspaper: found M²: cannot read the time value RptTime from the registry. [HRESULT = 0 X 80070490 ERROR_NOT_FOUND]

    Do a clean boot, without result.

    Does anyone know a solution to this problem.

    Thank you.

    Ed.

    Windows 7, update services does not, RESOLVED.

    The problem occurs when you change your hard drive for a bigger, in my hard drive of the case a GB Western Digital 340 WD 750 GB drive hard.

    For the Windows automatic updates again you need update the Intel Rapid Storage Technology Driverdriver. It will not be updated when you have intel check your drivers! For me, only the 9.5.6.1001 version worked. This driver can be found at http://support.hp.com/us-en/document/c02219204 .

    Versions available at https://downloadcenter.intel.com/SearchResult.aspx?lang=eng & ProductFamily = Software + Products & ProductLine = Chipset + Software & ProductProduct = Intel % c2% ae + Rapid + Storage + Technology + (Intel % c2% ae + RST) did not work for me (I tried the form version 12.8.0.106 08/08/2013.) Why does not the superior version is not clear to me.

    Good luck to solve you yours it took me two weeks to find it.

    Ed.

  • We need a replacement for Windows Home Server that does not cost $700

    We need a replacement for windows home server that does not cost as much as a PC. 2011 is not really available and 2008 has compatibility problems, because it is based on XP and Server 2003. None of the motherboard manufactures will support XP (thanks to MS) and more recent SATA drives do not work in my motherboard more old.

    Perry

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • Windows 8 family safety does not.

    Windows 8, parental control does not work.  He said "this account is being watched..." "and he's being watched, but I can navigate to all adult sites, even if the family safety settings are set to block.

    SOLVED!  I found the answer.  You must set the rating system in Microsoft Family safety.  I chose the premiera (Classification operations Commission)

    Without this setting, no site will be blocked.

  • Windows Live Hotmail Inbox does not update the autom automatically, until I have click Refresh. My OS is VISTA and IE9

    Windows Live Hotmail Inbox does not update the autom automatically, until I have click Refresh. My OS is VISTA and IE9.

    How can I solve the problem?

    Hi PaulaCohen,

    The question you posted would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
    http://windowslivehelp.com/product.aspx?ProductID=1

  • Update for Windows Vista (KB969947) security does not maintain install

    Update for Windows Vista (KB969947) security does not maintain install
    I have tried several times over the past two months installing this update, nothing seems to help scaned pc thinking it as spyware or some other malicious code nothing it just fails and I can't clear it out! any help at all would be great!
    Thanks in advance

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

    The foregoing despite...

    See the section "How to get help" of http://support.microsoft.com/kb/969947

    For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    Consumer Security Support homepage
    https://consumersecuritysupport.Microsoft.com/

    For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

    For enterprise customers, support for security updates is available through your usual support contacts.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • reinstalled my windows but forward button does not work

    reinstalled my windows but forward button does not work or hibernation modded shows in power options

    Hello Rahul,

    Thanks for choosing Microsoft Community!

    You have reached the right forum. Let us work as a team and try to solve this problem.

    If I understand correctly, you have problems with node in sleep and extended in Windows XP.

    Please read the following article and see if that helps:

    How to solve the problems of hibernation and standby in Windows XP:

    http://support.Microsoft.com/kb/907477

    Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

Maybe you are looking for

  • LabVIEW on Windows 7

    Did somebody get Labview installed on the public beta of Windows 7?  I get an error SDK when you run the Setup program, even with compatibility modes on. -Anthony

  • How to: diagnose hardware - freezes in windows and in the BIOS

    Original title: material and gel I have a computer that restarts and freezes frequently. Sometimes, when it freezes, the fan will go up to 4000 rpm and I have to hold the power for 5 seconds and switch it off. I don't know what could be the problem.

  • Addition of 16GB to new XPS 8900

    Have not yet opened my new (just released) XPS8900. He ordered withb16GB of RAM and have ordered 16 more RAM for a total of 32 GB. My question is do I have to configure the GET first, the computer running, then installing the extra memory?  Or instal

  • BlackBerry Z10 Evernote

    I noticed on some of the demo videos it is the app... but Evernote when I try and find Evernote in the site application section, there is no? What I'm doing wrong or what I missed? I'm new on the phenomenon of BlackBerry and I have a BB Z10, which is

  • If so, the text should display texta, if not, the text should display textb on form

    I have a form, unless you select Yes, expression it appears if you select No, expression 2 is displayed.I have a checkbox called 'choice' and an area of empty text called texBox.I tried these javascripts: indoor Actions-> mouse-> upward run a javaScr