Portege Z830-10R - some FN + Fx buttons do not work properly

Similar Questions

• Portege R600, Toshiba (backlight, toshiba assist) button do not work

  Hello world

  I have the problem with these two buttons on the right top corrner on my toshiba r600 and I just tried all buttons do not work.

  I associated with valid exe files buttons button support assist/toshiba toshiba / register with the paths of the target but buttons still do not work.
  also I check the bios there is nothing that can toggle buttons... etc...

  other things like software drivers successfully installed everything I download from toshiba support page.

  Any help?

  My version of windows is windows server 2008 enterprise x 64 sp1.

  Thank you.

  Hello

  The buttons work with the previous operating system preinstalled by Toshiba?

  I think the problem is the Windows Server 2008 enterprise x 64 sp1
  Eventually the added value package does not support it fully

  Of course the Windows Server 2008 operating system is based on Vista, but it s not the same thing and I think that's the problem

• Satellite A300-15J: touch button does not work properly from standby

  Recently I bought this laptop, works great except one problem...

  There is touchbutton for LED switching power.
  When I close or put the laptop in sleep, this button does not work like that but activates or disables the sound.

  I'm using Vista, I wonder if there is any patch or something for this problem.
  Thank you

  Andrew

  Can you please tell me if that happen after the day before, or after using the hibernation mode too?

• Portege R930 - Touch Pad on / off button does not work

  Hello

  R930 nine (PT330A) and a minor but annoying thing... the small button above the touch pad and below the space bar for the Touch Pad on / off does not work. I can't find the configuration options for this anywhere. Fn + F9 works very well.

  Not much, but I like things to work! And this button would be very convenient for a quick switch.

  Thank you
  Mark

  Can you use the Toshiba? I think you should have the button eco and presentation on this machine.

  Check please if you can enable/disable these keys in the HWsetup tool.
  I don t have Win8 machine, but I think that all these buttons can be enabled/disabled.

  Please, check and send comments.

• Satellite U400 PSU40E - Controll buttons do not work properly

  Hello

  I know what has been said before, but I couldn't find any solution that would work in my case.

  I have U400 (PSU40E) with Vista SP2 installed on my system.
  I have problems with quick launch buttons (Media Player, next song, etc.).

  Description of the problem:
  * 1 backlight button doesn't work (media player button)
  * No quicklaunch button works
  * media player button is lit even when the computer is completely shut down
  * problem not SP2 as it was also present with SP1

  So far attempted:
  Reinstalling Drivers chipset
  relocation of VAP
  * track the stages of http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=127504

  You have the same problems with Toshiba command buttons by using the image of preinstalled Toshiba?
  I think that the image of Toshiba would solve this problem

  I have a U400 with XP and Vista OS (dual boot) and all my buttons work properly; XP and Vista.

  So it must be a problem with your base of registry or something like that

• Equium A100 av buttons do not work properly

  I have a satellite a100 with play buttons pause and f/r on the left side of the keyboard. Suddenly and without apparent reason, two of them refused to work. Only the stop button and the button of the internet will continue to operate? It would be a software problem or do you not think that the buttons are broken inside the machine?

  Hello

  I don t think that the laptop or command buttons are broken. In my opinion the Toshiba control utility will not work. Why? Who knows? Maybe there's something wrong with the registry entries.

  I recommend you to download the Toshiba control tool and the common modules of the driver page.
  First remove the old controls of the operating system. Then restart the computer, reinstall the common modules and the new command buttons Toshiba utility.
  After restarting the laptop buttons should again work.

  Good luck and have a guy day ;)

• Qosmio G40: Vista Ultimate - control buttons do not work properly

  Hello friends,

  I have a Qosmio G40 for a few months and everything works well until now.
  The problem is related to the front control panel.

  If I use Windows Media Player, PLAY/STOP/PAUSE/FORWARD/BACKWARD buttons work well, but if I try to use the other buttons like REC (in any case) or turning on LEDS or DOLBY, the button makes the usual sound, but nothing happens, does not open any program that is supposed to open.

  Does anyone have an idea why this is happening. I tried to look for any software configuration of these buttons but can't seem to find.

  My system is Windows Vista Ultimate Edition.

  Best regards
  Ricardo Monteiro

  Hello

  The European driver Toshiba page provides the AV controller Manager
  This tool allows you to customize and TOSHIBA AV Control button preset settings.

  Maybe you should install this tool and it should check again.

  In addition, it would be advisable to reinstall the VAP

  Check it out!

• Satellite P300 - quick launch buttons does not work properly

  I installed Windows 7 Pro on my Satellite P300 and everytime I try to use the button mute etc it starts the program set button assignment but no options are available to choose.

  Has anyone encountered this and a fix?

  Hey Jones,.

  Can you please tell us which version of Windows 7, you have exactly? I mean the 32-bit version or 64-bit and you downloaded the package of value added specially for Windows 7? From Toshiba Web site shows also different patterns of P300, what model number you have?

  Have you ever tried to assign different functions to the button? For example, there is a file mute.exe as far as I know in case Toshiba should be assigned to the button mute. Check it!

  Maybe reinstall the VAP might also be useful.

• Satellite U400: Command buttons do not work properly

  Hello

  I have exactly the same problem.
  Control buttons only work when I disable %ProgramFiles%\Toshiba\TBS \HSON.exe but I can't set them for a specific program.
  In the assistance of Toshiba, there is no button name in the list (with or without HSON.exe launched) to assign a program

  Schmid, have you found a solution?

  Hello

  Finally, I was able to fix my problem of buttons. I installed the original driver of the recovery cd-drivers ValueAddedPackage. It now works withouth problem.

  Best,
  Schmid

• After Windows Update, Quickplay buttons do not work properly. Help!

  I have Win7 64 Bit Pro running DV8T.  After July 12, Windows update, my button of quickplay wireless now default off, and when I hit him to turn it on, it works, but then the treble control screen opens at random.

  I used system restore to go back before the update, but it had no effect on the quickplay wireless key.

  I don't use much the Quickplay but I need to have my wireless on - all the time would be OK, even if I am logged in.

  Someone at - it suggestions?  I'd be willing to change the registry, if necessary to keep the wireless, but do not know what and where to do it.

  Thank you.

  Hello

  First, perform a Hard Reset as follows.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, connect the power adapter and start Notepad.

  When windows has completely recharged, download and apply the update for the capacitive band on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp53501-54000/sp53677.exe

  When this has completed, restart the laptop.

  If the WLAN led still default to off, try reinstalling your driver wireless using Recovery Manager - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

  Recovery Manager - Windows 7

  After reinstalling, restart the computer again.

  Kind regards

  DP - K

• My Storm2 blackBerry smartphones all the physical buttons do not work properly?

  Hello

  Y does it anyone help me how to solve a problem that I have with my Storm 2, including all the physical buttons (green & red phone buttons, Menu and back buttons. Also the power button and convenience of left & right keys.

  I uninstall (downgrade) & reinstall (update) the operating system through the Desktop Manager, but stil could not fix this problem at all.

  Thanks a lot for your help.

  ARI

  Indonesia - PIN: 320D3E1E

  Remove the battery and place the unit in a warm place for a few days, like on a hot piece of stereo or electronic equipment, or place the device in a bag of uncooked rice. Give him a few days to dry, and then try again.

• Satellite L840/03R - FN buttons does not work properly after Win 8 upgrade

  I bought a new L840/03R and installed Windows 8 using the Toshiba Upgrade Wizard. There is no error message.

  The function keys do not work with the CTRL and ALT keys So I can't use the shortcuts like ALT-F4 to close windows - which gives "second screen" options. It does this for F4 on its own, or by pressing CTRL, ALT or SHIFT key.

  In addition, F11 activates / deactivates sound we / off rather than go full screen in chrome. F12 allows flying mode instead of "Save as" in word.
  Just downloaded and installed the package of value added.

  Am I missing something really obvious?

  * Key change function in series Satellite and Qosmio 800 *.
  http://APS2.toshiba-tro.de/KB0/TSB2903E00000R01.htm

  + New computers in the series 800 satellites only use the 'F' numbered keys without using the FN key to get the function. +
  + You can return to the traditional two keys FN key combination if you want by making a change in the BIOS or the HWSetup. +

• Satellite C650D - Fn buttons do not work properly

  Hello

  I'm a new Member here and maybe it was submitted like that, maybe that I forgot.

  For two weeks, I have trouble with the FN KEY.
  It does not work properly. I can't go up and turn down the volume, etc.
  I have reinstalled many riders as hothey utility. It is inconvenient and it makes me angry...

  HELP PLEASE.

  You have any ideas how I can fight with this problem?

  Hello

  The FN keys are controlled by the Support of Flash memory card utility.
  Try restarting the software. You can find it in all programs-> Toshiba-> Flash Cards.

  If that doesn't work, try reinstalling this application.
  You can download the page of the European driver Toshiba Flash cards
  http://EU.computers.Toshiba-Europe.com

  Welcome & good luck

• Satellite A300-24z - VAP - illuminating buttons does not work properly

  Sorry for my English.

  I have laptop Satellite A300-24z, model number PSAG8E and Vista 32 bit.

  I try to install this driver and hit numbers are not having a light.
  I try to do this 3 times and still does not work.
  Can someone help me?

  VAP is not a pilot, but includes 7 different tools and utilities. One of them is to control and when the VAP is installed it works correctly.
  Your laptop comes with Vista preinstalled or you trying to install it on your own?

  I mean if the laptop was supplied with preinstalled Vista, everything should be OK. have you done all that can turn this option off?

• Back arrow navigation button does not work properly

  Original title: Navigation problem...

  why I get navigation problem with pages of my web site when I click on the arrow to the left? only if I refreshed the page, it works.

  Is there anyone out there who can help me?

  Hi Kanyemedu,

  1. what web browser do you use? If you are using Internet Explorer, version of Internet Explorer you are using?

  2 are you facing this problem with all sites?

  If you use Internet Explorer, then I suggest you to follow these steps and check.

  Method 1: Run the Fixit.

  Troubleshoot Internet Explorer to IE quick, safe and stable

  http://support.Microsoft.com/mats/ie_performance_and_safety?WA=wsignin1.0

   

   

  Method 2: How to reinstall or repair Internet Explorer in Windows 7, Windows Vista and Windows XP

  http://support.Microsoft.com/kb/318378

  Important: Please note that the reset Internet Explorer (IE) resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords. »

  Please provide us with more information about the issue that you are facing.  In addition, follow the steps and let us know if this helps.