My Storm2 blackBerry smartphones all the physical buttons do not work properly?
Hello
Y does it anyone help me how to solve a problem that I have with my Storm 2, including all the physical buttons (green & red phone buttons, Menu and back buttons. Also the power button and convenience of left & right keys.
I uninstall (downgrade) & reinstall (update) the operating system through the Desktop Manager, but stil could not fix this problem at all.
Thanks a lot for your help.
ARI
Indonesia - PIN: 320D3E1E
Remove the battery and place the unit in a warm place for a few days, like on a hot piece of stereo or electronic equipment, or place the device in a bag of uncooked rice. Give him a few days to dry, and then try again.
Tags: BlackBerry Smartphones
Similar Questions
-
Portege M750 and Win8.1 Pro - the tablet buttons do not work
Hello
I have problems to install the tablet buttons in WINDOWS Pro 8.1. Everything else works perfectly.
In Windows 8 Pro this button worked fine, but now, after clean installation of Windows Pro 8.1 two buttons do not work. The buttons are the Toshiba help buttons and the presentation. I tried to set them up in Toshiba assist software but nothing happens.
I don't know that I have installed all the drivers who wverything work with Windows 8. Someone at - he tried this and add success?
> I don't know that I have installed all the drivers who wverything work with Windows 8
Windows 8.1 isn't Windows 8 and many tools and drivers Toshiba win 8 don't work or are not fully compatible with Win 8.1
As much as I know the Toshiba can't win on this Portege M750 8.1.
This means that no Win 8.1 driver will come out and in this case, certain features of the laptop as the control buttons may not work properly.You are using Windows Vista or Win 7, these buttons were controlled by added value package. This package does not exist to win 8.1 and has been replaced by other software called system Toshiba driver
So in case you want to try to get to the buttons, I recommend that you check this with Toshiba system driver
-
I think I'm on Firefox 13.0. He put itself as part of the update of my computer up to date (at least I guess that's what happened, because it has changed). I noticed yesterday that he would not favorite Web sites, but I thought it was just the website or bookmarks have been full-time or something. Today, I tried to remove a few bookmarks to make more, but they would not remove. I tried to register a new site, and it wouldn't work. I tried to close/exit firefox and re-opening of the program. While the program was closed, I installed the next set of updates on my computer. When I have opened firefox, all my favorites, and the tab menu (or what you call personal small bar on the actual tabs) were gone. I can't always favorite of new sites, so I can't even re-do all my favorites (and I got a lot, all of them arranged so it's a big loss and incredibly annoying). Then I realized that the back button does not work. And the cursor remains on the typing that I symbol, it does not change the arrow, when I click on a link.
One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.
- http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
- https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file
You can also try to repair the database of places with this extension:
-
The scan button does not work on Windows XP Media Center edition 2005
Name of the printer: hp psc 1350 all-in-one
Hi, this is happened since I reinstalled the operating system with an OEM disc, removing all the hp stuff. I got a new OEM drive that comes from hp (I think... well hp stuff works now) but the scan button does not always work. The old record was kind broken.
I don't mind, but it will be useful, if it could be repaired. Don't want to do something big, would rather just not fix that to do something does not.
Note: Scanning works, but I have to look somewhere else (e.g. opening scan in the Panel)
OK, that explains why the scan button does not work.
The complete software is required for the scan button to work, it is not a feature of the base software.
Be sure to follow the steps below in order to get is torted:
- Unplug the USB from the printer.
- On the start menu, enter the HP folder. and follow the link to uninstall to remove the current software.
- If you don't find it there, go into control panel > add or remove programs, and remove any software installed HP PSC 1300 series.
- Download and install the full feature below:
http://ftp.HP.com/pub/softlib/software10/COL8901/MP-23606-3/gc_w01_ENU_NB.exe - You will find the Director of HP under the HP software. If you have problems using it, make sure you install the following hotfix:
http://ftp.HP.com/pub/softlib/software8/COL17377/OJ-46104-1/CIT207355-HPCOM-patch-V8.exe
Kind regards
Shlomi
-
My optical drive is not displayed in "Device Manager" the eject button does not work
Latitude Dell with Windows 7
My optical drive does not show in the "Device Manager", the eject button does not work - I can only eject through the pin hole.
This means that the drivers are missing or that the disc is broken?
I tried to restart.
Thanks in advance
Dave Roberts
Original title: Reader in mind windows 7
Its possible the drive has failed. Is this an internal or an external drive? In both cases, make sure that all cables are properly connected and functional, including the power cables. If its a USB external drive then try another USB port.
But, assuming that you tried to update the drivers (get the latest compatible drivers on the manufacturers for your brand/model/OS(32/64 bit) PC support site and install to see if that helps - first set a system restore point)) and then see if this MS article helps - https://support.microsoft.com/en-us/mats/cd_dvd_drive_problems?wa=wsignin1.0
-
I updated Firefox on my Mac (10.6.8), and now the story is not known (that option is checked) and the back button will not work. Help?
One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.
- http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
- https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file
You can also try to repair the database of places with this extension:
-
Satellite U500 - the volume buttons do not work
Hello
I just bought a Toshiba Satellite U500 two days ago and already problems :(
It has a control buttons sensitive contact, which includes the eco, the media buttons and the volume control utility (+ and -)
The volume buttons do not work, and sometimes the computer crashes to their contact. Once I touch the-, he begins to turn volume down until it reaches zero, and even if I turn it up using windows, back to zero (as if the button is still depressed). The + does not work.Help, please. Is it possible to re-install the drivers?
The only solution I found is to disable them using HWSetup...Great news. Thanks for the comments!
-
the light on the power button does not work. How can I activate it?
HP pavilion dv7
Windows 7.
the light on the power button does not work. How can I activate it?
If the key light is not lighting up, then more than likely that the LED is just out for your power button. If the laptop is still under warranty, you can it be repaired or replaced, but as long as its not causing you any serious issues, I worry too much with it.
BRAVO is just a system we use to say thank you to informative messages. -
Documents on the right panel of the Start button may not work?
Documents on the right panel of the Start button may not work?
Right click show properties, Blank? Previously ok when click on it goes in the document folder.Hello
1 did you change on your computer?
2. What happen exactly when you open documents?
3. are you able to Documents to another location for example the windows Explorer folder?
Method 1:
Step 1:
I suggest you check in safe mode.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2:
I also suggest you perform the clean boot and check.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2:
I also suggest you to run the System File Checker.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
I suggest you send the screenshot of the windows properties document...
Provide this link to screenshot
-
I can connect to my home network, but all the other networks do not work... Error window says:
Windows could not connect to the (X)? network name?
[Link] Solve problems
[Link] Learn more about Internet connection problems
I gave security, uninstalled reinstalled wireless - uninstall security firewall reinstall and not go...
Windows 7
Hello
- What network are you trying to connect to?
- You are not able to connect to the Internet?
- Are you able to connect to the other network with wired network?
Try the methods provided and check.Method 1:
Check out the link and follow the steps.
What is network discovery?
http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discoveryMethod 2:
Check out the link and run the troubleshooter.
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsMethod 3:
Reset the TCP/IP and check. Check out the link and follow the steps.
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in WindowsMethod 4:Check out the links and check out them. -
I changed the permissions of folder to % ProgramFiles%\WindowsApps, now all the startscreen apps do not work, I need to reinstall windows?
I managed to fix it by adding 'All the Packages of Application' to the list of permissions
-
Download in the market button does not work!
Download in the market button does not work! No download by clicking the download button. Enough storage + reboots.
I just restarted my computer and now I can download.
Thank you!
-
the BACKSPACE key does not work properly and when I want to type a leter twice I have white some time between them
Hello
In what program?
Don
-
Blocks - Spooler subsystem or the display driver did not work properly
I have a Vista Home Premium OS. He crashes at least once a day and the State of boxes (approximately equal amounts) dialogue that the Spooler subsystem or the display driver did not work properly and that have been closed by the enforcement data system. Can you give me advice on how to fix these problems?
Hello
1 when was the last time, he did not work properly?
2. the accident happens at random or when executing a particular task?
3 did you a recent software or changes to the material on the computer?
Method 1:
I suggest you to go through the steps mentioned in the link and the Coachman. Run the automated FIXIT and check. You can also follow the other steps listed in the article.
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
Check if the problem persists, if she does not follow the steps in method 2:
Method 2:
This problem may occur if a third-party printer driver or service affects the functionality of a newly installed printer.
I also suggest you to follow the steps mentioned in the link and check.
Do not operate the automated FIXIT. Follow the manual steps and check.
You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."
http://support.Microsoft.com/kb/810894/en-us
(Also applies to Windows Vista)
Method 3:
You can also update the display drivers on the manufacturer's Web site or use the link below.
Updated a hardware driver that is not working properly
See also:
Pick up the pieces after a computer crash
http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash
Hope this helps and keep us informed if you need help.
-
Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.
Any ideas out there?
I know the pro 2 surface is not the real model, but at least it should work fine.arwinq,
You can see the system requirements, including the maps here.
https://helpx.Adobe.com/Illustrator/system-requirements.html
but I fear that you may be taken in this GPU issue described by butz in post #13 here:
https://forums.Adobe.com/message/7773402#7773402
You can try to switch between GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.
Maybe you are looking for
-
I just replaced battery & fan always working like crazy EtreCheck version: 2.9.12 (265) Report generated 2016-07-02 14:25:40 Download EtreCheck from https://etrecheck.com Time 03:08 Performance: good Click the [Support] links to help with non-Apple p
-
Reset the bios password for HP G62-435DX. Key: (67557209).
Please provide HP G62-435DX bios password reset code. Key: (67557209). Thank you!
-
Black screen, no known failure
Hello I have a HP Pavilion dv6t-3100 CTO Entertainment Notebook PC. The other day I was watching a video and the Flash Player crashed, my computer stopped then. Since then, whenever I start my computer I just go to a black screen with a cursor blinki
-
Is it possible, far from my computer to a pro to fix a broken record? Once more, an update that was installed manually before updating of monster issued 9/13 has caused my Windows Update not to download and install. Rather, he rotated constantly and
-
What application can play MP4 in the window?
Does anyone have any suggestions? Thanks in advance for your suggestions :>