Position in the list of control

Similar Questions

• All the lists on Control Panel and desktop etc does not open, just disappears

  When I move the mouse on one of the list in the control panel or try clicking on it just disappears, also another list, even the desktop icons opens more, when I click on them, they vanish - will not open, when I open 'start' I try to search for a document, it will not even open the folder with the arrow.  Please help, I don't know how it happened, it's very annoying!  I tried looking for the answer.  Not sure if I am in the field of the right question, but can't decide what she made of the object.  H.

  Thank you for your reply - I was able to reassign my 'power' on the keyboard button to shut down the computer, (had disabled), [usually used the Hibernate button], because it would not "stop" on the pop up on the arrow of the Start button, kept disappearing.  I just turned on and everything seems to work again, after checking everything. The only changes were the creation of a network, (had been disabled), I bought a netbook for a wireless connection.   Don't know what caused, but thanks for trying to help me.  Very grateful for this help.

• I just added a new email address. How can I change its position in the list of e-mail addresses?

  I can download e-mail from the server to the new email address, I just added to Thunderbird. But the new address appears at the bottom of the address list that is located on the left side of the window of Thunderbird. How can I move it upward?

  Also, I did something that made a padlock icon appears on top the the email envelope icon. How can I remove it? Thank you.

  Go to add ons page and sort for manual sorting folder. It allows you to reorganize the folders pane.

  The lock icon indicates that this account uses a secure connection. You don't want to remove it.

• Very old Threads on the top of the list

  Anyone else notice that lately, old son (unchanged) appear in the top positions of the list of threads? Example: this thread is number 2 in my list now, changed in September 2007.

  Gossweiler beat

  Switzerland

  Beat,

  He is an active spammer in the forum, the display about once a minute.  Maybe you've seen his posts?  When he published on a very old thread, it appears at the top of the list even if his post is deleted immediately.

  John

  John G. Blair Studio

• Item renderes in the list box please help me!

  Hi all

  I have a problem with the rendering of images with data in the list control plese help me.problem in detail...

  (1) i have a data outside and I have to call it by using the sample web service, the data is in xml format?

  (2) after the call to the xml I have to bind to the control list in flex, data will be images and text next to the xml file?

  (3) now I have to use converters to point to disply in the list box control, in 3coloumns

  first coloumn will be < space > image data and second column also image, third column also data < space > < space > image data

  I show below

  listBox

  ----------------------------------------------------------------------------------------- -----------------

  < image > ID name, city name < image > id(any data) < image > name, id (no data)

  (000) - 000-0000 < image > name, id(any data) < image > name, id (no data)

  ----------------------------------------------------------------------------------------- -----------------

  the foregoing is just example, the list i mage and data should be copied.

  Thank you

  Balu

  Peter Ent has an intro good/tutorial on Itemrenderers from http://www.adobe.com/devnet/flex/articles/itemrenderers_pt1.html

• Positioning in the region drop-down data?

  I use DW CS3 on mac.  I have a drop down box in the left sidebar, containing vignettes, these are links to different pages that show the enlargements of the thumbs and some details about the elements to the right of the main content.  The reason for this provision is to allow the thumbs to the left that will take the sidebar, contain the size of the page and most importantly keep the enlargement and the adjacent info inches.  It works very well the problem is that when you scroll through the list of thumbs and select one new page that resets the scroll bar upward to lose viewers place in the list, and defeat the purpose of the scroll bar.  The viewer must then scroll down and select the following thumb, which in turn forces them to scroll again to find the next inch. Question is it possible to index the thumb list and load the scroll bar position, as he was to the last page, or preset position of the list in the pages below in the list? If you're confused, you can see at http://www.thunderbirdtrading.ca/apparelLadiesItem-86.html the top four links are connected as it's the last, now scroll the list to the guy and click on the link it brings you to this page and resets the list losing your place

  If you want to go on the road to ajax there are a number of selected tutorial here for you up and running-

  http://www.maxkiesler.com/2006/03/15/round-up-of-30-AJAX-tutorials/

  For javascript tutorials pure ajax solution and try it - http://www.sitepoint.com/subcat/javascript , it's a long list, but the javascript 101 tutorials are probably the best place to start if you are unsure.

  If you can and you are happy with the terms, the ajax solution would be the best.

  PZ

• my 500 vacation photos are now on the lists section of the control panel-display wallpaper how to make their return to which they belong?

  Downloaded the camera vacation photos and sorted by them by putting each location days in it is a separate file. I also received a disc of NASA just with scenes of wallpaper on it and downloaded it.  These points of view, NASA, to another disc I changed once a week. I keep them in a separate folder named desktop wallpaper photos, in my position of photos. I went to change this view for weeks and not only discovered that all these photos have been in the display list folder / in Control Panel, but also all the pictures in the files of our holiday, which should have been in the image file in my documents. There are also pictures of my family photos files that are in the selection of wallpaper from the 'view' file in the documents.  I will return to my pictures folder and there not a file here for them, which means that it is not a copy of the file, but the actual file. I did not do in the lists of display/control panels. How can I remove or cut pictures that came the wallpaper display lists and put them in the my documents/images files where they should be. Tried to cut and paste functionality, but nothing of this nature appears.

  Hello

  Navigate to the folder where the photos are and then right-click on the image and click on copy and then open the folder My Documents/photo then right-click and press on paste.  Since you have a lot of picctures you can hold CTRL and left click each photo in this way they need only hit copy once.

   
  I hope this helps.

• How can I control the list of the available in the message SSL Client Hello cipher suites? I want to ban the MD5 and RC4.

  How can I control the list of the available in the message SSL Client Hello cipher suites?
  I want to limit my browser to negotiate the cipher suites fort. I would like to prohibit, MD5 and RC4.

  Set the SSL3 preferences related to false on the subject: config page (filter: security.ssl3.).

  • http://KB.mozillazine.org/about:config

• V9.0.1 FF and Zonealarm free 10.1.079.000 - cannot add Firefox.exe in the list of Application control settings (it keeps disappearing)

  I just rebuilt my XP SP3 desktop from scratch, so it's a pretty lean, clean machine right now (have all relocated apps yet). Updates are ongoing as of early this am.

  I installed FF v9.0.1 and free Zonealarm 10.1.079.000, who I thought were supposed to be compatible. However, when I try to add FF to the list of Application control settings, weirdness follows. I can add it, I can configure it... and then when I get back a few moments later, Firefox is no longer in the list of applications. Repeatedly, he disappears. I try to be pretty serious about security, and gives me a Benin urticaria cases.

  This is not expected behavior based on experience several years of using these two programs. But I must admit, these two versions are new to me, if anyone has any clues what / why / that's why?

  Thanks in advance.

  This lists me as having a response. I don't see the answer... Is it because I've re-edited my question a few moments after I posted it?

  M

• Qosmio G50 PQG55A: remote control jumps two places in the list of the menu of WMC

  I have a version of the G50 (PQG55A-04J01Y) Aust and have just done a clean install of Windows 7 (64-bit).
  Everyone thinks that when using the provided Toshiba RC6 remote in Windows Media Center, it jumps two places in the list of the menu.

  I downloaded the driver Winbond CIR, Win7, but it makes no difference.

  Very annoying as it does on all manu lists and even ignores the channels while watching TV.

  Someone at - he seen elsewhere or have a possible solution?

  See you soon

  There is a package called Remote Control Manager.
  This driver is required to install the remote control of your computer.

  The package is only for Vista, but maybe you should try to install too

• Retrieve the list of available control values IOName/IVILogicalName

  Is it possible to programmatically retrieve a list of all values of an IOName control (or more precisely IVILogicalName in this case)? I refer to the list of values that appears when you click the arrow on the menu drop-down control. For example, if I set the control to NO-SCOPE (IVI select class-> IviScope-> niScope) from the drop-down list shows only the names of the bodies that are present (for example, "PXI2Slot6"), including the sessions 'duplicate' (e.g. ' PXI2Slot6 (1) ").

  
  I can get the value currently selected control quite easily, but I would like to get a list of all available values. Is this possible? Values are just there in the control as surely there must be a way to access.

  My goal here is to find a way to recover all sessions IVI and then close them. If there is another way to do this, I'd be happy to hear it.

  Some related posts, I found:
  https://forums.NI.com/T5/instrument-control-GPIB-serial/close-all-open-IVI-sessions/TD-p/1752560
  https://forums.NI.com/T5/Digital-Multimeters-DMMs-and/what-is-the-proper-way-to-close-all-open-Sessi...

  DropDownList (with VI active scripting)

  I use it to find niDMM you can modify it to work with niSCOPE by changing the

  IVI of the results matrix class

  

  I use this for VISA

  

• Control of VISA resource name: to refresh the list of COM ports programmatically

  When the application runs, and you first click this control, it takes 2 to 5 seconds to respond and complete the list for the first time.

  I would like to auto fill in the first time that the application is busy. Can I do this?

  Before allowing the user to click & Select resource VISA name, first use the 'VISA find resource' in your program to do the same thing & then allow or prompt the user to select resources.

  Given that loading EXE, it will execute the FIND VI-first & Labview will inform the resources available.

• Issues related to the cell property node: Position Active for a table control

  Hello

  What determines the Position of the Active cell in a table control property node? I have this in my code and display the value of an indicator on front panel. The displayed value is always set to 0,0. Help for the property node says it's "read - only" so what defines the Position of the Active cell in a table control value?

  Define you the active cell with a property node.  Once you select an active cell, you can do this cell and single cell-specific things, things like the background value color.

• position of the control

  Hi all

  I need to know the position of the control on the Panel frontal wrt the screen and not the Panel. Currently, if I have a chart on a FP, and I use the 'Position' property, it returns the top and left position of the wrt Control Panel. I need the position of the control on the screen and not the Panel.

  How can I get this information?

  Thank you

  Ritesh

  You have to take the position of the front panel (use the FP Panel limits) and then take the position of the control so add the top and left values of positions, there you go you've got the position of the order with respect to the screen.

  Note: All doing this keep the origin of the left and top FP exactly meets the edges of the Panel so that you can get the actual position.

• record data in the list control

  Hi all

  I changed a program a list item in a list control of "51" "77" by using the function NOR "ReplaceListItem (...)"

  When I left the program and looked at the list control, I have observed the list item has still "51" (instead of the expected '77').

  The question is: ' how can I permanently replace a list item in a list control.

  Thank you.

  Bob

  If I understand correctly, you have defined some items in the list control in IUR Editor, then you want to change one of them by program and have this change in the file of the IUR.

  Well, if that's what you are trying to accomplish, there is no easy way to get it: operated by program changes cancel their scope when you exit the program and not reflected in the physical files. Use the ICB ActiveX interface, save the IUR in TUI form with function (CVI_AppConvertUIRToTUI), modify programmatically the TUI file, save it and then convert it to the IUR by CVI_AppConvertTUIToUIR () format. Not a trivial task, I'm afraid, and, possibly, this task is not worth.

  An easier way is to have an external options file or a configuration file where to store items to load in the list control when you need it: this file can be edited by yourself, either programmatically or manually when you need to change some items.