position of the radio to the spell button

Similar Questions

• How to move from the position of the START button on the screen of my Windows vista?

  I wonder why the START button of my windows vista changes its position on the screen of my laptop. I tried to search the solution by right-clicking the windows logo ang then go to properties and proceed to the taskbar button. From there I could not fined option on how to change the position of my taskbar, usually on the lower part of the horizontal of the monitor. Now, he has moved from the left upright. I need to restore the parameters passed. Please help me.

  Hello

  read this:

  http://Windows.Microsoft.com/en-us/Windows-Vista/unlock-and-move-the-taskbar

  Unlock and move the taskbar

  Once you unlock the taskbar, it is ready to move to any horizontal or vertical office edge.

  Taskbar

  View all

  To unlock the taskbar

  • Right click on a space empty in the taskbar. If a checkmark beside him doesn't lock the taskbar, the taskbar is locked. You can unlock it by clicking on lock the taskbar, which removes the check mark.

    

    Note

    To lock the taskbar into place, right-click an empty space in the task bar, then click on lock the taskbar, so that the box is displayed.

  To move the taskbar

  • Click on an empty space on the taskbar, and then hold down the mouse button, dragging the taskbar to one of the four sides of the office. Once the taskbar where you want, release the mouse button.

• Position of the option button for the answer is not in proper alignment.

  How can I get the option box and the response to align option? (See below). I don't know what happened to get that way.  I tried to change the width, the police, the type of police, has replaced the slide, etc. and have not been able to solve.  Regardless of the type of question, true-false, multiple choice, multiple selection, it is always like that. Thanks in advance for your help.

  

  Don ghinis

  LMS administrator / instructional designer.

  Check your preferences to see if you have enabled Autosize captions.  If so, turn it off and create a new question.

• Position of the button close the tab tab

  Just updated to 17 of Firefox on my Windows 7 PC. The close tab buttons are now on the left side of the tab instead of the right side. How can I move them back on the right side? I can't find other help on this and tried to play with: config userchrome, but nothing is. I can change the color, add a button in the bar, but does not affect the positioning of the buttons close the tab on the tabs themselves.

  Help!

  You have the module / theme / userstyle installed that controls tab behavior? You can resolve this problem by restarting with disabled modules. You can also reset firefox who, most likely, your problem will be solved.

• Want to change the position of the button

  I use HorizontalFieldManager and it it I add 2 buttons 'Add' and 'sub '. So I need to position Center butttons

  How, how to perform the positioning of the button

  You can do this using the method the HorizontalFieldManager setMargin().

  Something like:

  ButtonField btnAdd = new ButtonField("Add", ButtonField.CONSUME_CLICK);
  ButtonField btnSub = new ButtonField("Sub", ButtonField.CONSUME_CLICK);
  
  HorizontalFieldManager btnManager = new HorizontalFieldManager();
  int leftMargin = (Display.getWidth() - btnAdd.getPreferredWidth() -
                    btnSub.getPreferredWidth())/2;
  btnManager.setMargin(0, 0, 0, leftMargin);
  btnManager.add(btnAdd);
  btnManager.add(btnSub);
  

  Concerning

  Bika

• The menu buttons changing size and position for the navigation of the site.

  Hello world.

  The menu buttons appear fine in preview mode, but as soon as I download on Business Catalyst all going PEAR - buttons decrease in size and change position!

  I tried everything I can think of, including the re-doing the menu from scratch and upload whenever I make a change. Whenever I duplicate the menu on another page is when the problem occurs, but as I said that's no problem at all in preview mode browser.

  The site link is: home

  I would appreciate your help, its driving me crazy I have to show to the client as soon as possible

  Thank you very much

  I've been clicking since the menu buttons and a few times, but always without strangely shaped or placed images.

  I think you can be assured that this is just a bug in your browser, probably some old picture caching that is too persistent to get deleted automatically. Refresh your page or clear the cache of your browser manually. That could help.

• "Back" button shows the original position of the key

  Hello

  I'm new to Captivate and need help. This could be very basic, but I'm fighting.

  I have three images on the slide, each image click to see a story, then a button that closed the history (hide). When I inserted a button, he appeared in the middle of the screen so I've edited and offered the position to where I need it. I then grouped button as well as the text and action has added to the click image that would show the text. Once the text is read, you click the button to hide the text and button at the same time. But in the preview when I click the button, a similar button in the middle of the gray screen. I tried to use both advanced actions. But the problem persists.

  Can you suggest if I do something wrong?

  Thank you

  Aditi

  You should check the status display for this button, which looks like a default Image (old type) button. What is the action triggered by the Back button? Since each caption text (which looks like a legend, not a form) has the correct ID, you will need to have different actions for each button to return. Take a look on my blog here:

  Play with Captivate 9 - Captivate blog

  My approach would be like that for your use case:

  • Each image to create a second 'WithText' State, where you add the text container
    
  • Cover each image with a shape that has Alpha = 0 and stroke = 0 (invisible to the user) and the value of this form to act as a button. Check the overview States and down, so that they are also invisible.
  • A close button and it would mask output (icon "eye" on the properties panel).
  • Create an advanced sharing action for buttons in form on the characters that will see the Activate button close and change the State of the character:
    
    The settings will be in the Image, the State and the close button
  • Apply this action common to all characters. You can name the additional State always the same, it's the easiest way. That the picture will be different.
  • Create this action to apply for the advanced close button (I created the test with only two images file, you need to add all the images on the slide). This way you can still use the same button for each image. If this is not OK, you always have another button.
    

• Positioning of the problems with State multi (9 Captivate) buttons

  Hey all,.

  I just tried to use a button with an additional State (the text will turn green when chapter is complete). When I change the position of the button it will jump around everytime I go on it with the mouse cursor. The problem is that I can't change the position of other States of the button, but it is clearly recorded independently. Looks like a bug to me.

  So I actually can not press at all more.

  Update:

  1. This only happens in a responsive project
  2. This problem affects each smartshape transformed into a button, not just those with an additional State.

  Post edited by: Nicolas Reibnitz

  Just to finish this place for now:

  The issue seems to be the project file. Why this has happened, I can't say.

  Sonia has discovered and wrote in an e-mail we can resize the button jumping a little. Then the position is again in phase. After that even the new buttons show no more jumping behavior. Maybe it helps someone who has the same problem at one point.

  If someone finds out how this corruption of the project may occur, I would like to know about it.

  Thank you all!

• animate the position of the group when the user clicks on the button

  Hello

  I'm looking for a solution to facilitate a group when a button is clicked. The idea is that I have a number of buttons which, when one of them turned on, change the position of a group (image, text) to be moved to a position that is outside the visible screen in the middle of the screen. By clicking another button, the group will have to move it is out of position and the next group anime in the middle and so on.

  Any suggestions?

  See you soon,.

  Raoul

  Hi Roul,

  Can you please show us an example of work? However, it seems that it is not possible in Muse and you may need to create it in animated border.

  Kind regards

  Aish

• Manual positioning of the buttons of the PlayBar in HTML5

  Hello

  I would use the playback bar with custom buttons placed in Captivate project. I found this article:

  http://blogs.Adobe.com/Captivate/2010/11/playbars-Demystified.html

  who works a lot.

  The only problem is that this does not affect out of HTML5.

  I've read here:

  http://forums.Adobe.com/message/5658453

  I have to edit files another, I managed to locate. I can see how can I change the appearance of the buttons, but I do not see how I could change position or you are ordering.

  Can someone help me with this, please?

  Thank you

  The buttons on the PlayBar to HTML5 is prioritized in the javascript code for Captivate - in CPM.js in the published course content.  The function in question is cp. PB.playBarConstruct.prototype.layoutPlaybar - I replaced this function before in order to establish an order of the various buttons, but it is necessary to examine the code to gain some understanding of what he does.  The code can be substituted in the javascript code for the playback bar to avoid changing the code base of Captivate directly, which is difficult as Adobe no longer provides access to as it is embedded in one of their DLL libraries until it is used in the edition.  Alternatively the code can be corrected, after publication.  It would be useful for Adobe to provide more free and/or documentation about some of this code to allow customers to more easily innovate project-specific improvements.  This became the case largely over the years with Flash, for example with open-sourcing a lot of actionscript libraries and automation using JSX/JSFL.  I hope to calm down the paranoia about competitors and they will realize that being more open is only used to make their products more attractive to developers.  Of course, I say that competition is not better in this regard.  Other things I've done using patch / replaces the time codes of AS3 PlayBar and the HTML5 playback bar are:

  -Added extra buttons

  -Modification of the functionality of the existing buttons

  -Modification of the functionality of the table of contents, for example customization how/when bookmarking occurs - currently a slide gets a bookmark in and out it by default simply

  -Customization of TOC layout page/positioning, for example below the high on vs

  -Customization of the interaction between the playback mode and table of contents, for example the table of contents of closing when the course is in a playback mode, stopping to play the opening of the table of contents and restore when closed, etc.

  -Added disabled States and turning on and off of the taskbar buttons reading based on the State of the course, for example not allowing 'Next' until a slide was seen until the end

  -Fixed the rendering problems of animation in the HTML5 playback, such as issuing endemic where if a blade is cleaned back or rewound after that certain animations have been read and in some cases no matter, there are glitches and glimmers of images to animation in reports incorrect at the beginning of each element animation causing very distracting Visual effects.

  -Adding features to stocks advanced/variables in Captivate.

  I have many customers who have very specific needs and expect professional results, requiring these types of changes if a tool like Captivate should be used.  Customers are more willing to have the developers to use these tools rather than what I've done traditionally with custom Flash and HTML5-coded course.  This always requires a certain custom coding, however most can be developed in Captivate with a few patches applied in the edition.

  I am reluctant to publish these patches, they are a bit specific version Captivate, but many of the so-called widgets are also very specific version.

• How to position the two buttons at the top of the div inside a container div element?

  Hello!

  Good news...

  I created my very first thumbnail slider for my site that actually works!

  Bad news...

  The buttons that allow to scroll the div element, which is encapsulated in a container of Center, are are more placed on top of the div.

  Here's the html code:

  < div id = "centerContainer" >

  < div id = "aemcSlider" >

  < ul >

  < li >

  "< a class ="aemcPkgBut"href =" "target =" "alt ="AEMC Packaging"title ="AEMC Packaging"> < / has >

  < /li >

  < li >

  "< a class ="aemcGroundFlexBut"href =" "target =" "alt ="GroundFlexAd"title ="GroundFlex Ad"> < / a >

  < /li >

  < li >

  "< a class ="aemcClampBut"href =" "target =" "alt ="Clamp-On Announces"title ="Clamp-On Announces"> < / has >

  < /li >

  < li >

  "< a class ="aemcMetrixBut"href =" "target =" "alt ="Metrix Announces"title ="Metrix Announces"> < / has >

  < /li >

  < /ul >

  < / div >

  < div id = "leftBut" >

  "< a class ="arrowLeft"href =" "target =" "alt ="Left"title ="Left"> < /a >

  < / div >

  < div id = "rightBut" >

  "< a class ="arrowRight"href =" "target =" "alt ="Right"title ="Right"> < /a >

  < / div >

  < / div >

  Here's the CSS:

  Key container:

  #centerContainer

  {width: 800px; margin: 0 auto; background-color: #0e210e; position: relative}

  Div element:

  #aemcSlider

  {

  text-align: center;

  list-style: none;

  Width: 450px;

  height: 114px;

  margin: 0 auto;

  padding-top: 0px;

  padding-right: 0px;

  padding-bottom: 0px;

  padding-left: 0px;

  top: 67px;

  position: relative;

  overflow: hidden;

  }

  #aemcSlider a {margin right:-12px ;}}

  Left and right buttons:

  a.arrowLeft

  {

  Width: 29px;

  height: 96px;

  float: left;

  position: absolute;

  margin: 0 auto;

  display: block;

  background-image: url (.. / Images/arrowLeft.png);

  background-repeat: no-repeat;

  left: 311px;

  top: 91px;

  opacity: 0;

  }

  a.arrowLeft:hover

  {

  background-image: url (.. / Images/arrowLeft.png);

  opacity: 0.5;

  }

  a.arrowRight

  {

  Width: 29px;

  height: 96px;

  position: absolute;

  float: right;

  margin: 0 auto;

  display: block;

  background-image: url (.. / Images/arrowRight.png);

  background-repeat: no-repeat;

  opacity: 0;

  left: 720px;

  top: 92px;

  }

  a.arrowRight:hover

  {

  background-image: url (.. / Images/arrowRight.png);

  opacity: 0.5;

  }

  Here are the things I did to solve problems:

  If I set the div as a container for absolute, the left button disappears.

  I get the same effect when I change the relative position.

  I tried to change the position of relative to the two buttons.

  I also tried to position the buttons outside the div hand and no go.

  How can I position the relative div under these controller button?

  Any help would be appreciated muchly.

  ~ THE

  I don't see a slider.  The code of your slide seems to have a style inline with the width: 0px which is not normal.    Width should be about 400 px.

  I suspect that your arrows need a much z-index superior to appear on the top layers of cursor.  But that's just a guess because I don't see a slider.

  Nancy O.

• How to get the select button event Radio in my co

  Hello
  
  I want to get the the radio button selection event in my co, how do I get the event?

  Hello

  841475 wrote:
  I want to get the the radio button selection event in my co, how do I get the event?

  -There is no case of option button.
  -you need to explicitily set the event for the option button.

  Action: FirePaatialAction
  Event: RadioEvent

  -Discover the event in co by code below:

  If ("RadioEvent". Equals (PageContext.GetParameter (EVENT_PARAM)))
  {
  -In the case of a radio button. :))
  }

  Concerning
  Meher Irk

• a button in a position of the region

  "a button in a position of the region" - Hello, is it possible to place this kind of button among the elements of the region?
  
  in the Position of button options I couldn't find position I need...
  
  THX, mariam

  Hello

  I think there may have been a few ways to do this, but I remember only one.

  Create a new template specifically for this button to copy a previous style. Then you reference this type of button in the button elements of the region. This custom template would be something like:

  #LABEL#
  

  Or in your case, a link to a page.

  If you want to a different piece of functionality, so let know & I will try to remember the other way, I did.

  Mike

• Positioning of the buttons of Interaction

  I have an icon of interaction that has seven buttons that can be clicked. In fact, up to seven buttons. Sometimes, all will appear.
  
  What I want to do is, according to those who have posted, place a button given in a specific place so that its right edge is at position X, and again the rest of the buttons that are displayed until buttons left edge.
  
  So, first of all, how can I position a button within an interaction icon on the screen?
  
  Secondly, how can I determine the width of a given button is?
  
  I really appreciate any help, since I am under a tightening of the big time on this one. Here again, it is not how it works with things you can't find yourself?
  
  Thank you
  Joel Kinstle

  When you click a button attached to the interaction icon, you see the
  property - right panel?
  And you see the locations X and Y in the tab button on this Panel, right?
  So that should answer your first question (a little too easily). Just
  put in a number or a variable in the X / location field...

  To determine the size of a button, watch variables beginning with
  'response '. So ResponseWidth@"buttonName" would probably be what you are
  you are looking for.

  So to shift buttons, you could do;
  ResponseLeft@"previousbuttonName"+ResponseWidth@"previousbuttonName' in
  the X / field of the location of the next button...
  HTH
  Erik

  JPKinstle wrote:
  > I have an icon of interaction that has seven buttons that can be clicked.
  > In fact, up to seven buttons. Sometimes, all will appear.
  >
  > What I want to do is, according to those who are displayed, put a given
  > button in a specific location so that its right edge is at position X, then
  > return the rest of the buttons that are displayed up to this "left"
  > edge.
  >
  > Yes, first of all, how can I position the screen a button in an interaction
  > icon?
  >
  > Secondly, how can I determine the width of a given button is?
  >
  > I really appreciate any help, since I am under a tightening of the big time on this one.
  > Then again, isn't that how it works with things you can't find yourself?
  >
  > Thank you,
  > Joel Kinstle
  >

  --
  Erik Lord
  http://www.capemedia.NET
  Adobe Community Expert - Authorware
  http://www.Adobe.com/communities/experts/
  ------------------------------------------------------------------------
  http://www.awaretips.net - samples, tips, products, FAQ, and links.
  * Search A newsgroup archives'ware *.
  http://groups.Google.com/group/Macromedia.Authorware

• Position of the button

  I have three regions in a page, but I have the common "submit" button. is is possible to place the button just above all regions in the side left (not at the top of the page area)? any ideas are appreciated.
  
  Thank you
  Surya

  Hello

  Whenever the button is created, it belongs to a region corresponding to the page.
  Create the region seq num 1
  create a button corresponding to the region
  to define the region no template property - it's for hidding the boundary of the region.
  set the position of the button on the left

  you have 3 more regions with seq began 10,20,30...

  now run page you will have the button at the top of the left side of all 3 areas down.

  Thank you
  Mark Wyatt