Post in the deployment of buses of Service projects using maven

Similar Questions

• I have illustrator cs5, and I have plans, side, rear, fronts of vehicles. I did a trace of the line of these elevations and projected using the perspective for the perspective grid tool, but I get a distorted view on it, I'm trying

  I have illustrator cs5. I have front, side, rear, plans of vehicles. I need to create 3D illustrations. I did a trace of the line of these elevations and them projected on the perspective grid using the perspective tool.  I got a distorted view of each side of the rack.  What should I do?

  Please see the establishment.

• don't deploy not bcc atg successfully project.

  Hi all

  I am creating the project of TCC atg merchandising and adding an asset (product) that.

  but he stayed in the second last stage.

  Thus, I removed prod server cache.

  So please atg CCI expert to help me.

  

  -Aurélien.

  This project has successfully deployed? only once the project is deployed successfully, you would be able to proceed with that check stage of production deployment. so go and check in the administration console BCC to check if that project was deployed, it may be stuck in the queue too and you will have to manually before you can accept the deployment in production for this project. Thank you

• "JNDI name is already in use" error when deploying ADF Application after the deployment of Interface of AM Service

  Hello

  12.1.3 JDeveloper / WLS 12.1.3 / Windows 7 64-bit OS.

  I am facing the problem that is mentioned in the following post.

  https://community.Oracle.com/thread/2284290

  I created a simple ADF page with the data to display in the Employees table. The page works fine.

  I added a custom method to the AM and a profile of "Business Service Interface components" deployment of the AOS.

  When I'm trying to deploy the stand-alone WLS Service, it gives the error below.

  If I deploy only the AM Service interface, the web service deployment is going very well.

  If I cancel the deployment of the AM Service and deploy ADF EAR, then it also works very well.

  But if I deploy the AM Service and then try to deploy the EAR, then it gives the error below.

  And vice versa, if I deploy EAR application, and then deploy the AM service, it gives the error below.

  It was working fine until 11.1.1.7.

  I have done this repeatedly for a long time and wasn't any problem in 11.1.1.7 deployments.

  If something has changed in 12.1.3?

  Even if the AM Service is existing, it is deployed in the same application, it should be able to just crush?

  Here are the results with different versions

  11.1.1.7 - domain of the ADF - Standalone Server - works fine

  11.1.1.7 - SOA - Standalone Server - domain works very well

  12.1.3 - error field - integrated WLS - ADF

  12.1.3 - error field - independent server - SOA

  (The foregoing analysis is based on a simple project ADF as a point of Contact for that matter).

  Real-world scenario

  --------------------

  We need this because ours is a BPM Application and the Composite depends on the AM Service, so the AM service must first deployed in the field of the SOA.

  Then, we make the process as well as the ADF UI for task forms. ADF project depends also on the model project

  We get the error during the deployment of the BPM project and the ADF UI project below.

  Error

  -----

  Unable to deploy EJB: ModelEJB.jar model.common.HRAMServiceBean:

  [EJB:011055] The EJB deployment error ' model.common.HRAMServiceBean (Application: employees, EJBComponent: ModelEJB.jar) ", the JNDI name" HRAMServiceBean #model.common.serviceinterface.HRAMService "is already in use." You must assign another name JNDI in weblogic-ejb-jar deployment descriptor. XML or annotation corresponding to this EJB before it can be deployed.

  [12: 02:07] caused by: java.lang.Throwable: substituted for the missing class [EJB - 11055] the EJB deployment error ' model.common.HRAMServiceBean (Application: employees, EJBComponent: ModelEJB.jar)', the JNDI name "HRAMServiceBean #model.common.serviceinterface.HRAMService" is already in use. You must assign another name JNDI in weblogic-ejb-jar deployment descriptor. XML or annotation corresponding to this EJB before it can be deployed.

  Thanks for any help

  Sameer

  Found a workaround for this problem.

  I don't have to do this in 11.1.1.7 well!

  You don't know if it's the right solution or not!

  If anyone of you knows a better solution, please share.

  I did the 2 following things.

  a. classes of the AM Service Interface of removed files from deployment profile filters

  ViewController project-> properties-> deployment profile--> filegroups--> WEB - INF / classes-> filters

  : Uncheck * Service *. * files (4 - Service.class, Service.wsdl, Service.xsd, ServiceImpl.class)

  b. deleted the deployment profile of library jar ADF for the model project

  Model project-> properties-> deployment

  : Remove the deployment of ADF library jar files profile

  And now I am able to deploy time interface AM Service and application.

  It works for me because I won't need to deploy the AM Service interface again while deploying the process / code of the ADF.

  Since I will deploy the Service Interface of first Business components separately.

  Thanks and greetings

  Sameer

• Problems to change my url endpoint data control for Web Service design time vs deploy times. Where is the url of time to deploy the "deployment configuration" stored?

  https://blogs.Oracle.com/ADF/entry/changing_endpoint_url_for_a_web_service_data_control

  Using this link as a reference, I created a data control Web Service, and when I deploy via JDeveloper for different environments I can change my point of endpoint accordingly on this screen:

  

  However when I change my point of termination at the design time, the changes do not appear in the screen "Configuration of the deployment. This would not normally be a problem, but our automated deployment (maven/ant) seems to keep picking up the url "Deployment Configuration" instead of what we change in the DataControl.dcx. So I have a few questions:

  1. Why is there a difference between what we have in the source code and what is shown on this ""Deployment Configuration "screen for manual deployment of JDeveloper? "

  2. where is this "Deployment Configuration" end point url located? I can change it during an automated deployment as I can on a manual deployment?

  3. What is the best practice to change a url endpoint to the Web Service data control with during an automated deployment?

  It turns out that the connections.xml had the url of the endpoint that the profile of the deployment and jdeveloper was referencing at deployment time.

  In order to get our automated generation work, we use a search and replace of Ant utility to change endpoint in this connections.xml before construction/deployment of the application.

• Standard deployment failed installation foundation services deployed on the application server

  Good day ~

  Let me preface this with I have very limited exposure to Oracle products - thank you for your patience.

  I was busy learning, to install and prepare the Oracle EMP 11.1.2.3 components.

  Environment:

  New installation - I use Oracle Enterprise Performance Management System Standard Deployment Guide and the Guide of Installation and Configuration.

  Windows 2008 R2 - single server for all instances.

  SQL 2008 R2 - on a separate server.

  I started with the deployment guide Standard following all the steps for "installation of the Services of the Foundation" and at the end of the installation, it shows 'Impossible' for these red x products/task and status said Configuration is complete.

  The newspaper that I pointed at by using 'Help' EPM_ORACLE_INSTANCE/diagnostics/logs/config/configtool_summary.log says:

  (10 December 2013 12.48.49 PM): move the Foundation Hyperion [000 min 37sec] [PRE] - pre-configuration

  (10 December 2013 12.48.49 PM): pass [000 min 00 sec] [COM] Hyperion Foundation - the common settings

  (10 December 2013 12.49.48 PM): pass [000 min 58 sec] [COM] Hyperion Foundation - configure Oracle Configuration Manager

  (10 December 2013 12.49.52 PM): move the Foundation Hyperion [000 min 03sec] [DB] - database configuration

  (10 December 2013 12.50.01 PM): pass [000 min 04 sec] [PRE] Provider Services - pre-configuration

  (10 December 2013 12.55.40 PM): pass [005 min 38 sec] [PRE] Performance Management architect - pre-configuration

  (10 December 2013 12.55.41 PM): pass [000 min 00 sec] [REG] Performance Management architect - register with Shared Services

  (10 December 2013 12.55.44 PM): pass [000 min 03sec] [DB] Performance Management architect - database configuration

  (10 December 2013 12.56.15 PM): pass [000 min 30 sec] [VCC] Performance Management architect - configure the server of Dimension

  (10 December 2013 12.56.32 PM): pass [000 min 17 sec] [PRE] Essbase Studio - pre-configuration

  (10 December 2013 12.56.33 PM): pass [000 min 00 sec] [REG] Essbase Studio - register with Shared Services

  (10 December 2013 12.56.38 PM): pass [000 min 04 sec] [DB] Essbase Studio - database configuration

  (10 December 2013 12.56.38 PM): pass [000 min 00 sec] [PRE] calculation Manager - pre-configuration

  (10 December 2013 12.56.38 PM): pass [000 min 00 sec] [REG] calculation Manager - register with Shared Services

  (10 December 2013 12.56.39 PM): pass [000 min 00 sec] [DB] calculation Manager - database Configuration

  (10 December 2013 12.57.39 PM): pass [000 min 59 sec] [PRE] Reporting and analysis - pre-configuration

  (10 December 2013 12.57.40 PM): pass [000 min 00 sec] [REG] Reporting and analysis - register with Shared Services

  (10 December 2013 12.57.47 PM): pass [000 min 07 sec] [DB] Reporting and analysis - database configuration

  (10 December 2013 12.58.14 PM): pass [000 min 27 sec] [FSC] Reporting and analysis - configure the Services Framework

  (10 December 2013 12.58.15 PM): pass [000 min 00 sec] [RMI] Reporting and analysis - configure the Ports of RMI financial statement

  (10 December 2013 12.58.56 PM): failure [000 min 40 sec] [APP] Hyperion Foundation - deploy to the application server

  (10 December 2013 12.58.56 PM): failure [000 min 00 sec] [APP] Provider Services - deploy to the application server

  (10 December 2013 12.58.56 PM): failure [000 min 00 sec] [APP] performance management architect - deploy to the application server

  (10 December 2013 12.58.56 PM): failure [000 min 00 sec] [APP] performance management architect - deploy to the application server

  (10 December 2013 12.58.56 PM): failure [000 min 00 sec] [APP] calculation Manager - deploy to the application server

  (10 December 2013 12.58.56 PM): failure [000 min 00 sec] [APP] Reporting and analysis - deploy to the application server

  (10 December 2013 12.58.56 PM): failure [000 min 00 sec] [APP] Reporting and analysis - deploy to the application server

  (10 December 2013 12.58.56 PM): failure [000 min 00 sec] [APP] Workspace - deploy to the application server

  (10 December 2013 12.59.18 PM): pass [000 min 21 sec] [PRE] financial management - pre-configuration

  (10 December 2013 12.59.28 PM): move financial management [000 min 10 sec] [HDC] - DCOM configuration

  (10 December 2013 01.00.56 PM): move the Foundation Hyperion [001 min 27 sec] [WEB] - configure the Web server

  (10 December 2013 01.00.56 PM): pass [000 min 00 sec] [LWA] Hyperion Foundation - configure a logical address for Web Applications

  (10 December 2013 01.01.41 PM): iron loop [000 min 03sec] [BEW] on the task pane

  Newspapers are vague and I don't know where to go from here. Any ideas?

  Thank you in advance.

  Hello

  Please check if you are able to run Weblogic if you use as a Weblogic application server.

  Because it is the application server that establishes the communication between components.

  Thank you

  Amith

• Oracle 11G of OSB. Unable to find the Page of Configuration Oracle Service Bus.

  Hi all
  
  Sorry for the silly question apparent but I am a student and learning product.
  
  I OSB demand to 11G installed and running with a service proxy and routing work. The Oracle ESB documentation http://download.oracle.com/docs/cd/E21764_01/doc.1111/e15866/ui_ref.htm#i1327746 to Chapter 4.4.2 Oracle Service Bus Configuration Wizard new project of
  Use this wizard to create a configuration Oracle Service Bus project. For the configuration options, see Section 4.4.3 "Page of Configuration of Oracle Service Bus.
  4.4.3 oracle Service Bus Page of Configuration.
  
  I don't see the configuration page from anywhere in the left pane of the console. Am I missing something? The project creation works well but I do not see the Wizard configuration.
  Thank you.
  Concerning
  Salvatore Ilardo

  you will see that the wizard project in your eclipse ide tool configuration.

  When you are in the perspective of the Oracle Service Bus, create new project > Oracle Service Bus. and there you have this option.

• Problem during the deployment of web services - bad location of WSDL files inside the jar

  Hi all.
  I create my web service from wsdl.
  
  First of all I run wsdlc and download archive jar that contains the generated sources - the highest level, it looks like this:
  META-INF
  MyPackage
  WSDLs
  
  After this, I change my web service class, in particular, that I decided that it will be session bean thus the SessionBean interface.
  
  Then I run jwsc and download archive final jar - module EJB with WebService
  The highest level, it looks like this:
  META-INF
  MyPackage
  
  And META-INF contains among other WSDL directory files.
  
  Everything seems OK, but when I try to deploy this I get an error (which I assume is caused by poorly located inside the ejb module generated WSDL files directory, it should probably be at the root of the jar not in META-INF):
  Please help me to force jwsc to generate the module with good location of WSDL dir files.
  
  WSDLC INVOCATION:
  
  < by default of the project = "generate-EventNotifierService-of-wsdl" >
  
  < taskdef = classname="weblogic.wsee.tools.anttasks.WsdlcTask"/ "wsdlc" name >
  
  < name target = "generate-EventNotifierService-of-wsdl" >
  "< wsdlc srcWsdl="src/main/wsdl_resources/EventNotifierService.wsdl ' destJwsDir = 'target' destImplDir = 'target' packageName = "mypackage" type = "JAXRPC" >
  < / wsdlc >
  < / target >
  
  < / project >
  
  JWSC INVOCATION:
  
  < by default of the project 'build EventNotifierService wsdl' = >
  
  < taskdef = classname="weblogic.wsee.tools.anttasks.JwscTask"/ "jwsc" name >
  
  < name target = "build EventNotifierService wsdl" >
  < jwsc srcdir = ' src/main/java' destdir = 'target' encoding = "UTF-8" >
  < queue = "mypackage/EventNotifierService.java TJ' compiledWsdl =" '... / peg-eai-wsdl/target/EventNotifierService_wsdl.jar ' "
  Type = "JAXRPC" >
  < / TJ >
  < / jwsc >
  < / target >
  
  < / project >
  
  ERROR:
  
  # < 24 March 2009 14:21:35 THIS > < error > < hats > <>< AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1237900895770 > < BEA-149205 > < failed to initialize application "port" because of the error weblogic.application.ModuleException: Exception preparation module: EJBModule (EventNotifierService - 1.0 - SNAPSHOT.jar)
  
  
  Unable to deploy EJB: EventNotifierService - 1.0 - snapshot.jar EventNotifierService-1.0 - snapshot.jar:
  
  WSDL "wsdls/EventNotifierService.wsdl" is not in the deployment weblogic.utils.jars.JarFileDelegate@2bb9f2 - /var/peg/domains/wldev4/wldev4_domain/servers/AdminServer/tmp/_WL_user/port/edc553/EventNotifierService-1.0-SNAPSHOT.jar
  
  .
  weblogic.application.ModuleException: Exception preparation module: EJBModule (EventNotifierService - 1.0 - SNAPSHOT.jar)
  
  
  Unable to deploy EJB: EventNotifierService - 1.0 - snapshot.jar EventNotifierService-1.0 - snapshot.jar:
  
  WSDL "wsdls/EventNotifierService.wsdl" is not in the deployment weblogic.utils.jars.JarFileDelegate@2bb9f2 - /var/peg/domains/wldev4/wldev4_domain/servers/AdminServer/tmp/_WL_user/port/edc553/EventNotifierService-1.0-SNAPSHOT.jar
  
  
  at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:452)
  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:387)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
  at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
  at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
  to weblogic.application.internal.BaseDeployment$ 1.next(BaseDeployment.java:615)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
  at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
  at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16)
  at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155)
  at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
  at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doPrepare(DeploymentAdapter.java:39)
  at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
  to weblogic.management.deploy.internal.AppTransition$ 1.transitionApp(AppTransition.java:21)
  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
  at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
  weblogic.wsee.ws.WsException: wsdl "wsdls/EventNotifierService.wsdl" is not in the deployment weblogic.utils.jars.JarFileDelegate@2bb9f2 - /var/peg/domains/wldev4/wldev4_domain/servers/AdminServer/tmp/_WL_user/port/edc553/EventNotifierService-1.0-SNAPSHOT.jar
  at weblogic.wsee.deploy.WSEEEjbModule.loadWsdlDefinitions(WSEEEjbModule.java:130)
  at weblogic.wsee.deploy.WSEEModule.loadWsdl(WSEEModule.java:292)
  at weblogic.wsee.deploy.WSEEModule.verifyWsdd(WSEEModule.java:147)
  at weblogic.wsee.deploy.WSEEModule.prepare(WSEEModule.java:106)
  at weblogic.wsee.deploy.WsEJBDeployListener.prepare(WsEJBDeployListener.java:36)
  at weblogic.ejb.container.deployer.EJBDeployer.prepare(EJBDeployer.java:1193)
  at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:425)
  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:387)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
  at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
  at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
  to weblogic.application.internal.BaseDeployment$ 1.next(BaseDeployment.java:615)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
  at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
  at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16)
  at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155)
  at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
  at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doPrepare(DeploymentAdapter.java:39)
  at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
  to weblogic.management.deploy.internal.AppTransition$ 1.transitionApp(AppTransition.java:21)
  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
  at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
  >

  I think that the only solution is to manually update the webservices.xml.

• problem in the oracle service bus proxy service osb message flow

  I want to create a master service proxy that take 4 paramaeters as follows
  -Master of business
  1 - username password-2 3 - phonunumber 4-vouchernumber
  
  so I need the card to open business session
  It will take 1-2-Word past the same previous input user name
  
  then recharge business service will take 1-phone number 2-exhibit of the main service and session of the open session object
  
  then call to business closesession that will take the output of the opensession session and send the "State" of the output of the masterproxy :)
  
  can someone help me out here? its urgent
  
  Published by: user13027256 on November 29, 2011 12:53 AM

  Hello

  If you need to call several Business Service and use the legend of Service actions and at the end, use action road. If he's single legend in proxy service using only course of Action.

  I'm not clear what you mean! Please develop...

  And in the Action of the road... > you can use request action replace action to replace the application payload content (Business Service).
  Replace the Action:
  Leave the empty Xpath in variable body with Expression [request payload structure] and use the content of the node replace!

  Afonso

• Unable to see the Collections in remote desktop Services in Server Manager

  It doesn't seem to be a category for Windows Server for some reason, so I apologize if this is in the wrong category:

  We recently had an administrator leave our of the it group, and he was the one who had set up our fund services / remote server.  Recently, we wanted to deploy another remote application and found that we were not able to see the "Collections" option in the server in remote desktop services manager.  The only option listed is "servers".  However to reactivate the account administrator and the server like him gave us all permissions to see the option of Collections and to deploy another remote application.

  My question would be, this is a policy of setting Group / somewhere that is limiting the other users of the full access to Office services in Server Manager remotely.  I looked everywhere on the server (and google) to see if I could find where this setting is vain.  Any suggestions/help would be greatly appreciated.

  Thank you!
  Heda

  Hello

  Server forums are in an another Microsoft Community to it.

  This community is mainly for users.

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How to kill the deployment of EPMA

  Hello
  
  I EPMA 11.1.1.3 and after doing some changes into account and the location of the dimensions that I started to deploy the application. It was initialled at about 18:00... I have informed the customer that it usaully takes around 6 hours and a half to complete the deployment but after 8 hours, I checked his work yet she was going on and he could have hung up to 6%... The main thing all the changes have been reflectd in Hyperion planning... So my question is how to kill the running job?
  
  Thanks in advance.
  
  Pranav

  If he is blocked then by restarting the services may be the best option, this post may be useful - EPMA planning App - deploy is "stuck"

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• AO drive to 0 before the cancellation of the deployment NIVS Workspace

  Hi all

  NIVS 2011, our Simulink model villages are mapped to output analog.  Any value is lock to the outport cancels the sysdef is locked to the AO.  We are all set to 0 before the cancellation of the deployment of the sysdef.  We cannot stop the model, but it always leads the channel.  We can set the value of the channel, but the model rolls in it even when standing (it makes sense).  Ideally, we would have a combo alarm or procedure, but we cannot replace the outputs of the model.  I saw: http://forums.ni.com/t5/NI-VeriStand/reset-all-outputs-to-initial-values/m-p/2162306#M1980.  We can blame AO when the model is running or not.  We surveyed the AO after it flaws to 0 and cancellation of the deployment of the sysdef, and we did not see this high glitch.  So, it seems to give us the behavior we want.  I would check with the gurus to see if there is a better way to do it, or if there are known warnings at our approach.

  Thank you for your time and your insight,

  Steve K

  Hi Steve,.

  My personal recommendation would be to have a conditional calculated channel mapped to the output rather than using faults, in this scenario, conditional value of the string (and, therefore, the AO) would spend outport of the model and a user channel that stores a judgment by default value AO depending on the State of the model.

  The conditional trigger itself could be a model profile outport or stimulus (set a high when the model starts and down again when stopping value), or the State of the model can be determined using an agency independent survey - based on your post, looks like you can already do this.

  Kind regards

• error-17500 when you use the version selector and the toolboxinstaller.exe file not found since the deployment of ts3.5

  Whenever I run the version selector to switch between ts4.2 and 3.5, it displays the error message above and gives also advice how to fix for a version of visual studio, I do not have (I am using 2003). As well as this when I start the deployment of TS3.5 engine I get error message with toolboxinstaller.exe system.io.filenotfound. I know that they are then tried to repair/reinstall nothing works, any help would be greatly appreciated thanks

  Hi Elizabeth,.

  The message below is similar to the message that you receive (note that this message relates to Visual Studio 2005, you could relate to Visual Studio 2003):

  

  This is a known issue with Version TestStand selector and was reported to R & D (#171620). The picker Version TestStand assumes that when Visual Studio is installed on the machine, that Visual C++ has also been installed. It tries to write in Visual C++ specific files that do not exist if Visual C++ is not installed.

  This error does not mean that something is not necessarily, it is more a message that the file cannot be written in successfully. You should be able to continue to launch TestStand successfully without problem.

  On the deployment utility, I suppose that the two issues are related, however, it would be much easier to say for certain that the error you receive won't cause problems if you post a screenshot of the error. You can do it.

  Thank you!

• FPGA host broken during the deployment of Exe

  Hi all

  I'm working on a project of 7954R FlexRIO with LabVIEW 2009.

  The executable works fine on the development computer, but when I try to run it on an other PXI with LabVIEW installed TEN, I get the error 1003 on host VI.

  On the host VI, the FPGA code is loaded using 'Reference of VI FPGA open' with a path bitfile.

  You have an idea on the reason of the problem?

  LabVIEW RTE is sufficient, or do I have to install additional software/drivers?

  Thanks in advance.

  Hello Micael_,

  Thanks for posting on the forum of National Instruments.

  You must install LabVIEW 2009 RTE and the Driver NOR-RIO (with the support of FlexRIO) on desktop deployment.

  Can you tell us more about the error you got? Basically, the 1003 error indicates that a VI is not executable.

• Error during the deployment of my program for RTOS

  Hello

  When I want to deply my program in RTOS, the following error message if poster and doesnot allow the deployment successful, finishing Yes alreay s is not possible for me to work with the system.

  I use a host computer, a system in real time with it s RTOS (Labview real-time 8.6) with compact RIO cards and an FPGA card.

  The error is:

  ´´´´´´´´´´´´´´´´

  Deployment niLvFpgaAdjustHostInterfaceError.vi (12,10 K)
  Deployment of (10,27 K) niLvFpgaErrorClusterFromErrorCode.vi
  Deployment nirviErrorClusterFromErrorCode.vi (6.68 K)
  Deployment of pad Whitespace.vi (4.23 K)
  Error error Code.vi (350,11 K) Cluster deployment
  Deployment nirio_WriteBig.vi (23,59 K)
  Deployment nirio_CleanUpAfterDownload.vi (5.82 K)
  Deployment nirio_Download.vi (13.76 K)
  Deployment nirio_DisableInterrupts.vi (12,35 K)
  Deployment nirio_ReadBig.vi (37,66 K)
  Deployment nirio_IsItOKToDownload.vi (6,64 K)
  Deployment nirio_ConfigureBitstreamVersion.vi (13,58 K)
  Deployment nirio_PrepareForDownload.vi (6,64 K)
  Deployment nirio_EnableInterrupts.vi (13,58 K)
  Deployment nirio_Open.vi (13.91 K)
  Deployment nirio_Reset.vi (12,35 K)
  Deployment nirio_DMAStopAll.vi (12.37 K)
  Deployment nirio_ConfigureRegisterAddresses.vi (6.63 K)
  Deployment nirio_DMAReconfigureDriver.vi (17,41 K)
  Deployment nirio_GetCompilationResults.vi (13,61 K)
  Deployment nirio_Close.vi (11.28 K)
  Deployment of nirviIntfClose_PCI - 7813R.vi (85,91 K)
  Deployment of Volts on Temperature.vi (34,01 K)
  Deploy NI 9211 Convert temperature (calibrated) .vi (7,86 K)
  Deployment nirviFillInErrorInfo.vi (8.53 K)
  Deployment nirviReportUnexpectedCaseInternalErrorHelper.vi (5.51 K)
  Deployment .vi (4.98 k) nirviReportUnexpectedCaseInternalError (String)
  Deployment nirviReportUnexpectedCaseInternalError (U32) .vi (5.20 k)
  Deployment of nirviIntfOpen_PCI - 7813R.vi (90,91 K)
  Deployment deployment 2010_Library.lvlib\\192.168.0.19\2010_Library failed (error:-2147467259, LabVIEW: unspecified error (Hex 0x80004005).).
  Completed with errors of deployment

  ´´´´´´´´´´´´´´´´´´´´´´´´´´´´´´

  I made lot´s efforts to solve it, but no results, I am sure that the problem is not because of my program, I checked some differenet programs and the result is the same, I guess something happened to my computer RT or my OTR.

  Thank you in advanced for your help.

  Hola,

  por lo as he visto, el error tienes esta asociado has several things between las that include the version of LabVIEW, the led driver (OR-RIO) y el engine analysis. Para solucionarlo vamos a hacer back try cosas:

  1 - restore todo el software del cRIO.

  Ve Al para ello MAX > Configuration > remote systems > cRIO-9012 > software. Select software con el boton derecho y pincha sober Add/Remove programs. Desinstala todo el software del cRIO. When is reincie, boring the Operación para instalarlo. At the hora of seleccionar el software than dedicate instalar, marca NOR-RIO (my) x.x.x (ano). NO selecciones option OR-RIO x.x.x (my) (ano) with the help of the Scan Engine OR. Reinicia y vuelve a hacer el deploy para ver el error if ha notice.

  2 - Formatear el driver.

  In primer lugar, el Hay mover DIP Switch led driver safe MODE has the position IT. Ve al MAX, select el cRIO-90xx con el boton derecho y Select format the drive. Once formatted el driver y reiniciado, dale the IP y subred used mascara y reinstal todo el software según lo descrito en el paso anterior (Scan SIN motor mount). A hacer el nuevo prueba deploy desde el proyecto.

  NOTE: The change remember IP del cRIO en el arbol projects of LabVIEW.

  Esta forma're como is solucionan los errores del tipo "deployment completed with errors. Suerte con ello!

  Jesus