don't deploy not bcc atg successfully project.

Similar Questions

• Why iMovie does not recognize photos in projects?

  Why iMovie09 does not recognize photos in projects?

  I made a new projects and adds several still images. Photos are displayed in the project field, but right the screen remains black.

  I checked one of my old projects with still frames that will work perfectly, but it has the same problem - the photos do not appear on the screen more.

  Is there something that can be done? I also noticed that I can't get iPhoto to iMovie to add photos, not more, and Photo Booth is available.

  An iMovie11 upgrade would solve the problem? I do not have doen that, due to the large amount of results negative comments on iMovie 11 receipt.

  This is a bug widely reported with iMovie versions 8 or 9 ('09 or 11) under El Capitan.  Only iMovie 10.1.1 works 100% on El Capitan.

  Geoff.

• You receive the error software device driver has not been installed successfully using the USB LAN cable

  Original title: Please help!

  I bought a USB - LAN cable, but when I try to use it, this thing came out, "device driver software was not properly installed", then what should I do to use this cable properly? l

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. If I understand correctly, you receive error software device driver has not been installed successfully using the USB LAN cable. I suggest you follow the troubleshooting steps to check if this may help.

  1. don't you make changes on the computer before the show?
  2 are you able to get any USB devices to work in USB ports?

  Check the status of the device and the driver Version:

  a. open byclicking the button start Device Manager, click on Control Panel, clicking system and Maintenance, and thenclicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. double-click the category containing your device driver and thendouble - click the device name.

  c. check the status of the device tab click on driver tab arencontre, checkDriver provide, Date of the driver, the driver Version, digital signer. Please provide this information.

  d. click OK, exit Device Manager.

  Method 1:
  You can update the drivers on the manufacturer's Web site and check.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Use Windows Update to find a device driver
  Note to use Windows Update, you must be connected to the computer as an administrator:
  Follow these steps to use Windows Update to find a device driver: a.Click Start, click all programs and then click Windows Update.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  b check the updates.
  AA,a,AB,b,c.to determine if there are updated drivers, click on view available updates.
  If updates are available, click the driver you want to install, and then click on install.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  If you need further assistance, please answer and we will be happy to help you.

• Topics created by other authors using TFS and HR do not appear in the project

  I use Robohelp HTML 10 and TFS 2010.

  We are 4 writers working on a same project.

  The project has been successfully added to TFS and worked well with an author.

  Other authors have recently begun to work on the project, but I noticed that the topics created by other authors do not appear my version of the HR project.

  Here you can see the files that have been added to the table of contents, but these files do not appear in my project.

  

  The files are in TFS and appear in my local working folder, but not in my project. When I generate the WebHelp, he finds the missing files.

  I had to import the files into my project to see. This seems to defeat the purpose of the use of source code control with many writers working on a same project.

  Is there something that we put in place to make this work correctly?

  Someone at - it seems this before? Any help would be appreciated.

  Hello

  What happens if you delete the PCD file before opening the project? RoboHelp see new files?

  You can try the following:

  1. Click Tools > Options
  2. On the general page, select "delete the project (file .cpd) cache before you open any project.

  Take a bow

  Willam

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Whenever I turn on the tooth blue attempts to twin with a Apple Watch I don't have not one.

  Whenever I turn on the tooth blue attempts to twin with a Apple Watch I don't have not one. I want to pair my blue tooth value head, but can't because he's too busy looking for a watch. Help.

  read your manual of headsets, that the way that you put it in pairing / discovery otherwise mode it will not be found by your phone

• IMovie 10.1.1 don't update or create a new project/trailer

  I've recently updated to iMovie 10.1.1. Since then, iMovie will not create any new projects or trailers. Anyone know why?
  It also doesn't let me upgrade to 10.1.2!

  Since then, iMovie will not create any new projects or trailers. Anyone know why?

  What happens when you try? Error messages?

  It also doesn't let me upgrade to 10.1.2!

  iMove 10.1.2 requires OS X 10.11.2 or newer. What you have installed?

  And Spotlight must see installed iMovie.  Is installed in your Applications folder and called iMovie?

• Hello how do I configure Firefox 8.0 so that he asks me if I want to save a password for a Web site. At the present time I don't get not an option whenever I go into a site I know is safe, I have to enter user name and password. I've been good tools etc.

  Hello how do I configure Firefox 8.0 so that he asks me if I want to save a password for a Web site. At the present time I don't get not an option whenever I go into a site I know is safe, I have to enter user name and password. I've been good tools etc.

  Thank you, any help would be help full like whenever I connect to Face Book for example I have to provide all the information and it's a pain

  Soon Alex

  See:

  • https://support.Mozilla.com/en-us/KB/make-Firefox-remember-usernames-and-passwords#w_make-Firefox-remember-usernames-and-passwords

• Firefox don't support not any page after some time.

  I'm having a problem with firefox while surfing after a while. For example, during the first 15 minutes, there is no problem, after a while firefox does not load any page, I have to close and reopen again to make it work. While firefox does not load, I can use other browsers as usual. It just don't load not any page at all, but the program itself is so I can close it with the X button. What could be the problem, I'm using firefox last.

  The default value of the pref Network.http.Max - connections has been increased from 30 up to 256 in versions of Firefox 6 +.

  Try to decrease the value of the pref Network.http.Max - connections 256-30 such as used in versions of Firefox 3.

  • https://support.Mozilla.com/kb/Firefox+never+finishes+loading+certain+websites

  See also:

  • http://blog.bonardo.NET/2011/09/30/is-your-firefor-freezing-at-regular-intervals
  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

• Qosmio G40-10 s - driver software for device has not been installed successfully

  I get a message...
  Software device driver has not been installed successfully.
  Memory PCI controller... failed

  Is this a problem with my laptop or software that has been loaded. Now on Windows 7 32 bit Vista

  Hi spudcam,

  This means that for the memory controller PCI is no driver installed?

  Well, it is difficult to say which driver you need exactly and Windows 7's official is not compatible with the Qosmio G40.

  AFAIK memory PCI controller is Intel Turbo Memory module, so you would need Robson package driver of the official website of Toshiba.
  Now, I looked on the page of Toshiba and guess what, it s is available for G40 and Windows 7. :)

  Check this box!

• Installed Windows & 32 Bit drivers and USB ports don't DO NOT WORK.

  I bugh a laptop HP Pavillion 14 TS who came to preinstall Windows 8.1 64-bit I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem.  None of my network drivers work and 2 uSB ports where I plug in my mouse and other devices of SB to do more work.

  I did a back up of the established SW leader who has all the HP dvers for my laptop but will not install the network and video of divers. And when I try to install the drives, I get the error message saying that they are not compatible with this version of Windows.

  I loked on the HP site under my model of laptop that s as above, but HP don't do my notebook drivers for Windows 7 32. And I looked on both the Realteck site for network wireless Realteck and Ethernet Realteck drivers but none of them work or install on my OS. Intel video drivers do not work either. So I'm really stuck one I can not return to 8.1 Windows as if that 32-bit Windows 7 works on my laptop but most of my drivers is not compatible with the operating system and I don't want not to install 64-bit Windows, I like 32-bit.

  Drivers that do not work on Windows 7 32-bit are:

  Realteck RTL8188EE 802 - 11 b/gn witeless lan

  Die Ethernet Realteck and

  Intel High definition graphics driver

  That don't work at all under Windows 7 32 bit because they are the only 64-bit drivers.

  So can you please post me a link network bth and drvers of graphics from Intel that works with my laptop. I tried many different drivers Realteck and raphics for Windows 7, but none of them DOES not work on my system. And none of my USB ports are no longer works. So, how can I fix this?

  Hello:

  Should be no problem to get W7 32 bit to work on this model.

  Just use all the drivers and software from the HP Probook 450 G0 on your model, except the Audio, BIOS and firmware files.

  Your model uses only the Intel HD graphics driver.

  The first pilot, you need to install the Intel chipset installation utility and reboot.

  http://h20565.www2.HP.com/portal/site/hpsc/public/PSI/swdHome/?cc=us&lang=en&sp4ts.Oid=5359407&AC.admitted=1408825729704.876444892.492883150

  Audio: Accept the agreement.  Download and install the driver first on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  If for some reason, this model Intel HD graphics driver does not work, use this one...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23713

• Receive the error code 0 x 643 trying to update. Not sure why they don't is not loading?

  Receive the error code 0 x 643 trying to update. Not sure why they don't is not loading? Tried to look at the code but nothing helped. Any suggestions?

  You can watch the following article to see if this will help with the error 80070643.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643>

  UTC/GMT is 15:50 on Sunday, August 19, 2012

• Personal settings don't are not loading. by default the generic profile so the programs can be used, but data is missing. What should I do?

  Laptop computer startup after detached work and returned to the House, I got the message "personal settings don't is not loading" and he went to a generic profile by default similar to what you see when you turn on a new computer for the first time.  I use Windows XP Professional on a Dell Latitude d

  All programs are intact, but all files are absent, including Quickbooks data.  We use Carbonite backup so food won't be a problem; How to bring back the personal settings?

  Thanks for your help!

  It is an easy one.  You probably have a corrupt user profile.  One of the following solutions, you should get back working again...

  "Windows XP problems if your profile is corrupted"
    <>http://support.Microsoft.com/kb/326688 >

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  ""Windows cannot load your profile because it may be corrupted"error message when you try to log on Windows XP.
    <>http://support.Microsoft.com/kb/318011 >

  Note also that corrupt user profiles are usually accompanied or caused by the corruption of system files.  After recovery, it would be prudent to run a complete control of the disk (chkdsk) with the /F or /R option to repair corrupt sectors.

  "How to perform the disk error checking in Windows XP"
    <>http://support.Microsoft.com/kb/315265 >

  Note that this can take hours and cannot be interrupted, then perform it when you won't need your machine for awhile.

  HTH,
  JW

• My CD/DVD drive don't bed not any disk.,.

  DVD player, CD/DVD drive properties don't bed not any disk, said this device works, crossed the convenience store and checked the Device Manager and it says that the drivers are there and working, but the player will still not CD/DVD read, and it hangs my PC when I try to play a CD/DVD. So what's the problem?

  Hi williamroyce,
   
  Follow the steps listed in the section "Let me fix it myself" from the link below and check if it solves the problem:
   

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• I have access to the internet, yet my browsers don't is not loading.

  So I have a problem with my load of browsers. Last night, I opened Google Chrome and the pages started to load, my BitDefender Antivirus, notified me that it had removed a potential virus. As he did, my browser stopped loading. I've refreshed and got nothing. I checked my status of framework and the internet router and it was all good. I reset my router still and still nothing. I checked Mozilla Firefox and Internet explore both with the same result. I let the internet because I can connect to Skype and my Extension on Chrome Twitter let me get tweets and send them. Normal pages don't is not loading. I was able to look at the logs in BitDefender to see which files have been deleted.

  They are here:

  Virus name: directory:

  Gen: ranging .kazy. 3292 C:\Users\***\AppData\Roaming\Microsoft\Windows\shell.exe

  Gen:variant.kazy.3292C:\Users\***\AppData\Local\Temp\dwm.exe

  Gen:variant.kazy.3568C:\Users\***\AppData\Roaming\Microsoft\Windows\shell.exe

  Gen:variant.kazy.3292C:\Users\***\AppData\Roaming\Microsoft\Windows\svchost.exe

  The * are in my name.

  I found this thread,

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/4d16a7a7-59e0-4f59-92e9-0d22161569d4

  and I tried all the suggestions. None worked. Need to some how to restore these? I suck at this kind of stuff.

  Edit: I also tried to do a system restore and every time it says restore failed. I did it four times.

  Ok. So the Malwarebytes program has not found anything, but now it works. I don't know what was wrong but his back. Thanks for trying to help.