var emailfrom:String = "[email protected]"; var emailto:String = "[email protected]"; var emailsubject:String = "test message"; var emailbody:String = 'this is a test message ';
function sendInfo (e:MouseEvent): void {}
var varSend:URLRequest = new URLRequest ("mailer.asp"); varSend.method = URLRequestMethod.POST; varSend.data = (emailfrom emailto emailsubject, emailbody); }
what I can add to this to see if it connects to the .asp file?
It's the .asp
& lt;. ASP & gt; < head > < title > Emailer ASP < /title > < meta http-equiv = "Content-Type" content = "text.asp; charset = iso-8859-1 ">" < / head >
Nothing happens when I hit the button send someone can tell why... Just phone with the web hosting provider and they take over asp and I have the correct SMTP
I am currently using Adobe Captivate 5.5 and am having a problem with the missing Post results button when I do not see the quiz. The button shows very well when I take the test. Here are my settings:
Status report: Pass/Fail
Report to the LMS: Score
Choose the Date of the report: Quiz results only
Statement survey: Interactions and Score
Hello
Check your pass/fail Quiz settings, check the failure attempts how you have defined for the pass/fail Quiz. If you have defined attempts more than 1 then result button Post will be visible once the learner has consumed all attempts or learner reviews the quiz.
Try one thing, when you fail the quiz, quiz press review and then goto Quiz slide result, check if you see the message button or not?
I teach the development of games using Flash Professional CS6, and one of my students has photosensitive epilepsy. He finds that the "strobe" effect that occurs when he runs the Test film on a film with errors in his script triggers headaches which can be a precursor to an adjustment. Obviously this makes it very difficult for him to complete his laboratory and the assignment of work. Is it possible to prevent a Flash animation running if it contains a syntax error?
I created workaround by adding a bunch of additional images for the beginning of the movie, which displayed a message "SYNTAX ERROR," If the script does not work - it gives my student seconds margin quite the movie, before the start of the stroboscopic effect. I have a single image at the beginning with a goto statement that jumps over the frames of error if the code has no syntax errors.
This seems to work ok, but it's an ugly solution - does anyone know of a better way to deal with this?
Thank you.
Another solution is to use Flash Builder (IMO you should teach this workflow, because it is more suitable for non trivial projects), and then you have several options:
After an ACE code change, build automatically
If you have not changed the code, project > Clean
If you have set up your project so that you get the buttons Flash project, you can click the a (compile in Flash)
These options will simply build the Flash animation without playing, and you can see the warnings or errors in the Panel right before clicking the button Play or Debug.
If all this is just too much for a beginner student, you can still post the film, which creates the swf file without play, watch the Panel of warnings/errors and then launch the SWF in any other way (for example, by double-clicking on it or the HTML page generated).
Is someone can you please tell me how can I play http live streaming from OUT 3.2 for Flash player, iphone, ipdad, HTML5 player, Android and other devices?
I restarted my XPS 18 after only an update of Windows 10 (I think that was the case the graphics drivers) and now it does not start.
No logo, no POST... nada. Press and hold the power button for about 10 seconds, I can here a subtle click and whir, I think it's the HD fan and processor die. Then hit power button once again, I see a code flashing on the power light: 7 flashes white, pause, repeat.
I can't after that. Connect a USB keyboard and pressing F12 do nothing.
No difference between supply the stand and plug the power cord directly.
I made a banner in Flash Pro and adding a button. I went through the steps to make the button to take me to a specific web page and it works when I test it in Flash Pro. Once I export and try to click on it outside the program, my cursor turns into a hand click, but by clicking on the button does nothing. How can I fix?
Thank you @kglad for your reply, I will consider. Tired of searching, I decided to download just for the Web (system used by my school) and voila... the buttons for brought great external links. =)
I recently created a Flash game which is the extreme slowing down on the greatest levels. Use Adobe Scout with a version of the game that has Advanced telemetry activated, I learned that, on these levels, what we call 'hit test button' is engulf a huge piece of my game processor cycles - we're talking about 25 to 33 percent or more.
A few searches on Google directed me to this thread over 2 years, in which Mark Shepard noted that the hit test button is a process legacy meant to support the old class SimpleButton. He said that this led to the slowdown in scenes with many objects from the display list, and there is no way to avoid it otherwise than to reduce the number of objects in the display list.
Other users Chorus to say that the hit test button moved not when they switched to using touch rather than the events of mouse events. However, my game is for PC, and as such, I can't use the touch events rather than mouse events.
So my question is, basically: in 2 years because this problem has been reported, did you do something to allow programmers to turn off Flash button hit-testing? (Like, say, allowing us to set a flag to supportSimpleButtons to false to disable the button hit testing process?)
It answers the question, but it was not sufficiently clear.
Yes, disable mouse interactivity will stop the hit test. to stop the interactivitee use:
whateverobject.mouseEnabled = false;
If this object is also a container of displayobject, also use
Internet Explorer runs the latest version of Flash Player
Can anyone give me any suggestions as to what I could try to fix this?
Any help would be appreciated.
Neil_O wrote:
Thanks Mike,.
The context in which it was that we have a web site where we have historically used .swf and .flv movies. A couple of customers have "complained" that they could not see the movies and, when we have tried on Windows 8.1 IE11, nor could I. This leads me to the Adobe test page, where I only saw the film of test if I have activated the Caompatbility Mode (as you suggest - thank you).
Our web site will not make .swqf or .flv movies regardless of the mode of Campatibility. Next, I suppose, is to see if we can at least restore some features - even if it is 'encouraging' users to enable Compatibility Mode.
SWF and SWQF even become obsolete. A year ago I stopped using video and Flash animations and moved to HTML5.
1. they need any plug-ins. Even with IE11.
2. they are mobile and Internet accessible from more than half of all traffic is now in mobile phones or tablets (which cannot and do not run Flash), it makes no sense to develop content that is invisible for many viewers.
Compatibility mode is that only a "band-aid" for an important screws upward to MS. HTML5 eliminates the need for Mode of Comaptibility, eliminating the need for plug-in that they SAMU changes inadvertently disable.
I must show an object (active form), when the user gets 10 points in the test on a test result page. I tried a few options (such as 'if cpQuizIfoPointsscored is 10'), but it did not work. Do I did wrong? Thanks in advance. :-)
You will need a tip, triggered by the event action on enter score slide. And Yes, you can use this system variable, will be a conditional action.
IF cpQuizInfoPointsscored is equal to 10
See the form
ON THE OTHER
Continue
The shape must be set to invisible in its properties panel before starting. Two questions however: what's the score? The maximum is 10?
Lilybiri
PS This form remains visible until you hide it again.
I have created a graph on one layer in my timeline in FLASH CS4 and then add a new layer above it with the text to create a zoom effect. When I click on control > play the movie plays fine with text zoom out as it is supposed to, but when I click on the control > test movie film shows white with the text visible permanently and graphics flickering on (visible) and so fast that it is barely visible in the Sea (not visible). Any ideas on why the film of test does not work? Any help would be greatly appreciated! Thank you!
ashmic19
The kind of behavior you describe is often obvious when there is an error in actionscript in the file. You have all code in the file?
It could also be a case of loop between two images, well based on what you describe, I see currently is the case.
I use AIR for iOS and the scene is 1152 x 1536, whenever I have test the movie, that it seems in full resolution and it is difficult to see everything. How can I make the window test movie appear smaller when I press Ctrl + Enter (test movie). Thank you.
You can make the window smaller by dragging to change its position and then clicking on file/close. then re - test.
You can click on view/Zoom to allow the view/zoom out to see the full stage in the small window.
I'm sure this has been tossed around, but I can't find anything in the "General": area
I have a site that uses flash to display a movie. I would like to be able to replace the flash with a vimeo movie flash embeded movie IF is not available - as an iPad or an iPhone. Any idea of the code needed?
myweddingphotography.com
Thank you.
Bartone
SWFObject for Flash detection has been around for some time now:
I need to start learning ASP, so I bought a book on this subject. I opened a (very simple) ASP page, example the CD-ROM that accompanies it in Dreamweaver (CS3). The open page and was visible, but when I click F12 to preview in a browser, the page would not display. This is the full simple code which is on the attached page. Is there anything else I need to do to make this work? Thank you!...
> ... You see, it all started it is because my boss wanted me > learn a new programming language in the hope that it would be > stimulate > new ideas for the development of applications. Neither he nor I know > anything > About ASP, but I guess he heard something about this somewhere, so it's > what it > harvested.
In general, just picking a new language is not the key to stimulate new ideas for the development of the app.
A better approach would be to seek new methods of app development and/or consider looking at all the different infrastructure application out there.
ASP is almost identical to PHP with regard to the basic principle. ASP is not developed by MS, however.
ASP.net is the replacement and is an object oriented programming language ALA JAVA.
Ruby On Rails is a trend option these days, so maybe look at it. It's the Ruby language, written on top of the Rails application framework. Much of supporters of her out there.
> Are practically the same PHP and ASP (I mean, in what they can do)?
In terms of "what they do" pretty well any of web programming language will be as well at 90%.
In terms of syntax/logic, ASP and PHP are very close, if no real advantage to Learning ASP too in depth (especially since he's not really developed by MS more).
> a true enough statement after learning ASP.net known PHP can only > be a > waste of time?
ASP.net is King in the world of enterprise application development. If it's a direction your company wants to target/head in, and then makes sense. If you want to integrate closely with the other offers from Microsoft (office, sharepoint, active directory, MS SQL, etc.) ASP.net then makes its full meaning.
Otherwise, I would say PHP is really sure to be somewhere. It has a HUGE market. sharing, constantly updated and many commercial and open source modules at your disposal.
I have a copy of Windows 7 Home premium in a few years, I bought at Costco. In September 2015, I had a collapse of PC, so I built a new machine i7 with 16 GB of RAM, a 250 GB, 4 GB video card SSD, etc..
From time to time I get the "windows 7 is not genuine, Build 7601" error. I found a solution that will remove the message for about a month, then it returns.
My other three machines run Windows 10. This machine win 7 is my PC photography business, running Adobe cloud, and tons of plugins and software publishing, I have NO desire to mess with.
I tried these fixes this morning, but still the message:
http://tinyurl.com/h9pgkk2
http://tinyurl.com/hecbw6h
Thank you
Moreover, the response to
I just found a copy of my restore DVD and a Bootable CD with Diagnostics, for original HP desktop which is dead. But now I have a brand new machine.
These discs can somehow convince Windows that my installation is legitimate?
is your computer HP no. had an OEM license, and may not be transferred to another computer. Try to use these discs to the computer somehow on-the-job will ensure that you will never fix your activation problem.
- - - - - - - - - - - -
In your new question, it might be advisable to use activation by telephone. You can get the number to use by typing slui 4 [not only slui] in your search box of the start menu.
There might be a technical problem that needs fixing first, so you could wait and the advice. There are problems in other parts of the system that can destroy havoc of activation as having a substantially incorrect clock time.
I have recently installed Windows 10 in my PC and it seems that there are problems with Flash Player. I have found that I am not able to run videos in Adobe TV (nor any who, I think). The plugin is on in all my browsers, but the result of test of Flash Player, it's that it's disabled. I went into the control panel and I see that Windows has installed the 32 bit version. My OS is 64-bit. I believe that this issue is causing the player should be disabled, although in each browser plugins appear as active.
For any suggestion, thank you very much!
First of all, check that the ActiveX filtering is configured to allow Flash content:
Internet Explorer 11 and edge have a number of changes both in the way the browser is identified with remote web servers, and how it treats JavaScript for behavior targets specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the provider of content changes their site to conform to the new approach to development required by the modern versions of IE.
You can try to work around these problems by using the compatibility view:
I'm trying to use the OCR to read characters from a LCD. All works :-) but... it leaks a LOT of memory, becoming unusable in a loop. I think the problem is the file of character. I tried several ways to create a (for example of the Interior vision as
original title: user account control Just downloaded 2010 Home and Student and am running Windows 7. Whenever I try to open EXCEL or Word, I get user account control to allow "changes to the computer. I have another computer same configuration and
I installed Windows 8 Pro on my machine (Core i5, 4 GB Ram, 1 GB 6850 Radeon Toxic, 1 TB HDD)... I'm happy to use it except for one of the major problems that is search. I can't find the files on my HARD drive! Applications, the settings option does
Hi, I'm using Flash Pro CC: building 15.0.0.173I'm developing flash games and usually have 5 + tabs open in my coding time.Whenever I run flash cc pro, do not show my open tabs (I'm not talking about opening them manually from the file - > open recen
Is anyone aware of the syntax or a framework to be able to specify the index of a materialized view of the journal storage space?We chunk our objects by tablespace - index, tables, CLOB.Creating a materialized view log and specifying the storage spac
