Postpone the decision

Similar Questions

• HP 50 g - postpone the evaluation

  I'm a little new to the 50g (from TI) and am curious to know if there is a way postpone the evaluation of numeric values using the RPN (e.g. print 2 + 2 on the stack instead of 4). I know that this is possible when you work with a variable (the battery will print 2 * X * 6 + 9 + 10 etc.) when you enter the expressions between single quotes, so I am sure that the calculator takes care of everything. I tend to look at the written equation and not the screen when entering calculations and is a bit easier to check what I've entered if the calculator shows explicitly.

  Since you already know the correct way to postpone the evaluation (put the phrase in single quotes), understood what you want the 50g to do.  Is this something like that?

  2. ENTER THE VALUE 3 +.

  -> "2 + 3"instead of 5 (or in addition to 5, no pun intended).

  If so, the answer is no, it not there no built-in setting that requires the RPN to act this way.  If you want to "2 + 3"on the stack, you must either type as such with single quotes or type it as such in the EquationWriter (EQW).»  Or use the 50g in the algebraic mode (ugh!).

  That said, the function guided enter the 50 g makes it possible for you to rewrite all the way, the calculator works, including a kind of 'algebraic story' of RPN which produce operations, but that would require programming.  The ALG command at the top-> 256 Library (development library) might be useful in this endeavour.

  DISCLAIMER: I do not work for HP. I'm just another owner happy 50g.  If some of the above is incorrect, I'm happy to be corrected by the owners of colleagues 50g.

• The decision stage: you click on Email

  A simple click to display images in their browser will be counted as a click in Eloqua? It's the difference between email opens and click-through for this step? How do you determine specifically this step?

  Thank you, Rob! So the decision stage 'Open Email?' is related to the images being downloaded and click the links in the email sent is making reference to the decision stage "clicked"E-mail address "?

• Clicked by the decision rule

  I am creating a program and I'm using the rule of decision "Clicked through specific E-mail Web site". When the "Mobile view" or "Manage preferences" link in the email is clicked, is the part of the clicks that will use the decision rule?

  Check the HTML source code on the header and/or footer assigned to the email. It will look like this if it has the redirector link instead of a direct link with the object.

  Eloqua redirect link:

  http://now.Eloqua.com/e/er.aspx?s=xxxx&lid=1055&ELQ= recipientid

  Direct links to other objects are the following (if you use the provided OEM modules)...

  Read online:

  http://now.Eloqua.com/es.asp?s=xxxx&e=53447&ELQ= recipientid

  Global unsubscribe:

  http://app.EN25.com/e/u.aspx?s=xxxx&ELQ= recipientid

  Management of the subscription center

  http://now.Eloqua.com/e/SL.aspx?&s=xxxx&ELQ= recipientid

  Read on mobile

  I don't have it. Anyone want to post it for me? ;-)
  

• Can't drag the decision in the schema

  I'm starting a new stream of work, but in the scheme, I don't then drag the icon of the decision on the Workflow page. any idea?

  You need to slide on an existing element / line

• Postpone the expedition had used standby_archive_dest

  Hi all
  
  I put our primary destination States and Eve archive to postpone due to network problems.
  
  We run on a lower bandwidth backup link so shipping is impacting normal users.
  
  The capacity of the network means that it is not possible to trigger transport services in DataGuard Manager so I postponed the shipment at the database level, which usually works.
  
  For some reason, this time if the database/Dataguard has felt this and started using the parameter standby_archive_dest to its new location and continues to ship and to resolve gaps, even if the primary is to postpone for service to our waiting.
  
  Any thoughts on why the standby_archive_dest is now used and how I can stop this shipment other than the closing of the pending database which we do not want to do?
  
  See you soon
  
  Steve

  The LogShipping configurable database property specifies if redo transport services can send again data to the database in particular waiting.

  If the primary database is the State of TRANSPORT-OFF, then restore the transportation services for all standby databases are disabled, regardless of if or not the LogShipping property is set to ON or OFF.

  Source - broker Data Guard 11g Release 2 (11.2) E17023-04 (see Chapter 8)

  Its small and I would like a copy if you use the broker.

  Best regards

  mseberg

  Published by: mseberg on April 19, 2012 06:05

• Pay Apple has the decision supports service?

  Pay Apple has a service of decision support? This means that I cannot map recommendation when I buy something. For example, I have save 3 cards. A, B, C and I bought a coffee in Starbucks and when I pay by pay Apple, pay Apple recommend card B to pay due to the advantage of the B card. Please answer me on this subject. Thank you

  N °

  GB

• Need help with the decision of the laptop

  I'm sorry for the length of this post, but I really need help. I am buying a laptop and what should be a very exciting perspective (my first laptop purchase) turns into a nightmare that had me pretty much in tears over the weekend.

  My budget is not big - absolute maximum of 600 pounds, but I'd rather spend a little less than that.

  I mainly work of office (Word, Excel, database and PowerPoint) and also some Photoshop work. I also play a strategy game called Caesar 3. I want to charge my copy of XP on the computer or replace Vista or as a partition.

  Looking through the available templates in my price range and rising benchmarks, I found the following:

  Most have processors such as the Intel T5250 or T5450 or AMD TL 58, which are all rated as ok, but not very well. Some have the AMD TL 60, which is a little better and one or two have the T7200 Intel which is even better.

  On most of the machines graphics cards are the ATI Radeon Xpress X 1200 or the Intel GMA X 3100. These two are calibrated as not terrible and the review says that they cannot manage strategy games. Some of the models have the ATI Mobility Radeon HD 2400 and HD 2400XT and one or two have the HD 2600.

  The problem is that the models that have the best processor have the lower rated graphics card and those who do not have XP drivers, I see.

  Don't mind a 15.4 screen "(although the 17.1" would be very nice to have) and want a pretty big hard drive (160 +). I get 2 GB of RAM.

  I'm at my wits end. I don't want to buy a computer that will eventually take a minute or more to refresh a screen when you have more than two things open, or you will have to keep rebooting to make it work. I want to be able to play my one and only (Caesar III) game which is a strategy game and I want to be able to work in Photoshop and maybe one or two other things open at the same time, as a website perhaps.

  Help me please, anyone. I asking the impossible? I can't get my hands on an email address for Toshiba try to get clarity on their part on the issue of drivers and they will be available in the future.

  Then there is of course the issue detailing as each stock only a limited number of models, and we must choose between those detailing.

  I hope someone can help me!

  Hello

  The problem is you want to buy a laptop all over the place but don t want to spend a lot of money.

  In addition, you want to change the XP operating system and have XP drivers.

  Well it's boyfriend very difficult decision ;)

  A laptop for gaming with the graphics power full card cost slightly more than £ 600
  If you need to make a decision; You want to buy a gaming laptop and to spend more than £ 600 or you will have a notebook that is ideal for everyday use, like watching DVDs, in collaboration with the office software, etc.

  The Caesar game is unknown to me, but I assume that it doesn t need a graphics card high performance and it should work on a normal phone too.

  I think that a Satellite a200 is not bad choice for you, because some A200 laptop computers were shipped with the Intel Pentium Dual-Core processor and an NVIDIA GeForce graphics card.

  And very important is that all the XP drivers were already released ;)

• tables that the decision-making process

  Hello

  I have a list of tables that must be used as input for decision making. attached are the VI and the input file. What is the high_data > 10, it must perform the square root which is under the real condition. When the high_data is less than 10, it should return zero which is false conditional. I tried to use the Chooser of the case, but it seems table cannot be used for the selection of cases. Can someone help me with this. Thank you

  First of all, you have the race condition because of the flagrant overuse of a local variable. Most likely, the local variable is read before the terminal of the table gets valid data. Remove the local variable, and use a wire directly. Do not forget, LabVIEW not Executive up and down or left to right. The order of execution is entirely determined by single dataflow. If you have multiple processor cores (and you probably have), things can even Executive in parallel.

  Second, have you tried simply to encapsulate an autoindexing FOR lop around the structure of matter? Then clean the proof of the scythe, which needs a scalar instead of an array, etc... There are also solutions without loop, but let us in to the essential.

• Generate a report of the decision with the batch?

  Hello

  I use the OPA 10.4.4 and I need to run a calculation for several cases.

  I am interested in Batch Processor with Java implementation.

  I tested the batch with csv output. That's exactly what I need, except that I have not found how to get the record of decision.

  I tried to add the option "result-style = 'decision-report' ' for my output in the xml configuration file attribute, but all I get output is the value of the attribute."

  Does anyone know if it is possible to obtain a decision with the batch report?

  Thank you

  Noémie

  Sorry for the late reply on this John.

  Unfortunately, records of decision for a deducted output value is not a supported processor batch feature, and the 'output-style' attribute will be ignored in a data map. The output values deducted one batch processor.

  See you soon

  Frank

• Signs by the decisions of modification in the video track V2

  Hello friends of the Forum,

  It seems that there must be an obvious answer to this, but with trial and error, I'm unable to find a way to get around in change decisions in the video track 2 (V2) in Premiere Pro CS6.  In other words, if I have video clips in V1, I am able to use the top / down cursor keys to move forward or backward a publishing decision at a time.  However, if I edit decisions in V2, I am unable to a decision cursor to the time in the V2, although I have visually disabled V1 by clicking on the icon 'eye '.

  I suspect there is something I need to alternate so that this is possible, but just empty to try things and searching through forums.

  Thanks for all your comments that may be provided.

  MBS

  Disable the targeting of track for V1 (and A1 if there is audio with cut here):

  

  This will allow you to edit point to edit point on the V2 using the up/down keys.

  To quickly override and stop at all the mount points, hold the SHIFT key when you use the top or down arrow key.

  MtD

• I'm struggling with the decision to buy the desktop version of Lightroom or BCC me struggling with the decision to buy the desktop version of Lightroom or CC

  I will soon buy a new computer and don't know if it will be a PC or a Mac. All my current photography software are PC. I use mainly Lightroom V. 5 point whatever for minor treatment but has discovered that a recent camera (Canon G3 X) camera raw acquisition format is not taken in charge by this version of LR 5 (least AFAIK). So now I'm debating upgrade 1) LR 6 (office) (which is crazy expensive (US $150) knowing that in a few months that I'll need to buy a new laptop (PC or MAC) so I have to decide now on this decision too or 2) subscribe to CC now and just finish. I'm honestly not picky about switching CC because it's just a LOT of things that I don't need. Synchronization with mobile devices etc far too many things that require a computer for this photographer's time. (Bring back film as I say)

  In any case, a few questions for the community.

  (1) if I switch to CC now and choose the PC version, can I change it later if I decide to buy a MAC and how many hoops and loops, I need to pass through this do (and no extra cost)?

  (2) if I decide to buy the desktop version (PC) and the switch later to a MAC, you can switch OS within this license or do I need to buy the same version again for MAC OS?

  (3) if I now choose Lightroom CC, decide I don't want to unsubscribe and then buy version 6 desktop, will still be able to retrieve/reading/access/on my computer a little matter, I have dealt on the version of cloud on the desktop version?

  (4) I remember in the old days, if you have a version of Adobe software, when new versions were published, you paid only for a version upgrade ($ 99 I think when I upgraded from 4 to 5 in 2013), not the full price for a license. Is that still the case, and if so is the 'upgrade' cost US $ 150?

  Thanks, any help on these questions would be greatly appreciated

  Exhausted...

  Kim

  Thanks I will try that

  Kim

• How can I adapt the decision XML report that comes with a warning event?

  Through the web determinations warning events can be used.
  
  To make visible warning events in the response following XML must be added to the XML query:
  
  < typ:show - events > true < / typ:show - events >
  
  
  
  When a warning event is present in the XML response I also get a report of decision with report-style = 'basic attributes.
  
  When many warning events are present in the output XML file, this has a negative impact on performance.
  
  It's the reason I'm looking for a possibility to delete or configure the standard decision report that comes with a warning event.
  
  Is this possible?

  You can make smaller decision reports by setting the "silent" or "Invisible" option on attributes (see 'Hide information in a record of decision' in http://docs.oracle.com/html/E38269_01/toc.htm the political Oracle © modelling User Guide)

  It's really the only option to change the records of decision.

  See you soon
  Frank

• Re: Satellite A200 Windows crash when loading according to the decision

  Hello

  Recently, I had problems with my laptop during booting. Whenever I start my laptop after a stop, my laptop goes down while windows tries to load. However, when I try to start it up for the 2nd time, windows works perfectly. I tried to do the repair start several times but each time the laptop hangs on the window to the loading screen when I try to start it after the next stop.

  You are able to help me please because I don't think it's good to have it down whenever I turn it on my laptop.

  Thank you for your time and help,
  skyryan

  NOTE: I have the Satellite A200, running Windows Vista. Oh and recently I posted a problem with my computer laptop freeze after awakening from a sleep. I don't know if the two are related: S

  Hello

  You see, the windows repair is a fairly complicated procedure. I don't know if reinstalling the operating system is acceptable to you, but I would recommend.
  You can use image disk or hard drive recovery. And don't forget to save all the necessary staff.
  Even though I know that a lot of things about windows troubleshooting, I prefer reinstall problems rather fixing that can take a long time.

  Post edited by: Jeka-HE

• The decision to upgrade or not to support.

  I have done work for a client of mine for 10 years and have used Multisim/Ultiboard all this time. Version 8 to 9 to 10. I got my own copy of Multisim version 11. The problem that I am running is my client decided to renumber the reference indicators in patterns so that they are grouped logically and make them easier to find on the PCB. Reasonable request. This makes it almost impossible except Version 10.1.1. The only way to do this is to change codes in Ultiboard and annotate back to Multisim, but really a get a chance that the log file, it uses for the retro-annotation is added constantly to so as soon as you try to make a second retro-annotation, it tries to make all the changes made to the day 1, that the design was created. Can create some disorder that is not recoverable from. I found the references on this forum that retro-annotation has been improved in later versions. So I try this in Version 11, and Yes, I can just change the codes in Multisim and before them annotate to Ultiboard and after that I said to ignore things, he wants to change for any reason, that market. However, a new problem arises. In version 10, I was able to edit the parameters of a potentiometer in Multisim and assign installation hidden holes for net '0', so they are connected to the Earth in Ultiboard. Version 11 don't leave me not assign pins to the nets at all! I wasn't able to figure out but how connect these points to the ground (or chassis or whatever it is) without making the visable pins, that makes schematic villain. Is it possible to attach nails hidden for net 0 in a future release as if it was in Version 10? My client asked if it has to go so I can clean her creations and as it is right now I would have to say no.

  I've improved in all cases and found that all my concerns are not a problem in version 14.