HP 50 g - postpone the evaluation
I'm a little new to the 50g (from TI) and am curious to know if there is a way postpone the evaluation of numeric values using the RPN (e.g. print 2 + 2 on the stack instead of 4). I know that this is possible when you work with a variable (the battery will print 2 * X * 6 + 9 + 10 etc.) when you enter the expressions between single quotes, so I am sure that the calculator takes care of everything. I tend to look at the written equation and not the screen when entering calculations and is a bit easier to check what I've entered if the calculator shows explicitly.
Since you already know the correct way to postpone the evaluation (put the phrase in single quotes), understood what you want the 50g to do. Is this something like that?
2. ENTER THE VALUE 3 +.
-> "2 + 3"instead of 5 (or in addition to 5, no pun intended).
If so, the answer is no, it not there no built-in setting that requires the RPN to act this way. If you want to "2 + 3"on the stack, you must either type as such with single quotes or type it as such in the EquationWriter (EQW).» Or use the 50g in the algebraic mode (ugh!).
That said, the function guided enter the 50 g makes it possible for you to rewrite all the way, the calculator works, including a kind of 'algebraic story' of RPN which produce operations, but that would require programming. The ALG command at the top-> 256 Library (development library) might be useful in this endeavour.
DISCLAIMER: I do not work for HP. I'm just another owner happy 50g. If some of the above is incorrect, I'm happy to be corrected by the owners of colleagues 50g.
Tags: HP Tablets
Similar Questions
-
Can't access iscsi with ' error in the evaluation table display iscsilist IndexSizeError:
I have been using my readyNAS years and today, after having extended a target (in volume), I can't access the Volumes-> iSCSI tab anymore.
SOS!
I really need.
The error I get in FF:
"Error in the evaluation table display iscsilist IndexSizeError: Index or size is negative or greater than the quantity allowed.
It's a bit different in Chrome, but it won't let me copy it.
Error in the evaluation table display iscsilist IndexSizeError: cannot set property 'maxLength' on "HTMLInputElement": the provided value is (-1) is negative.
Any suggestions please?
Thank you!
It was super useful:
I downloaded the update of intermediate as a file and updated firmware to update.
And now I can access the iscsi again tab.
MDGM, thanks a lot!
I'm a happier person now!
-
best practices for the evaluation of prerequisite logic GOLD
Greetings,
I think TS is not the basic features for the decision-making process (imp) for execution. All recommendations are welcomed and appreciated. Please find below the script.
I would like to perform some configuration steps (custom step types) to a signal generator based on the selected user 'Test '.
To make it simple for the signal generator Let's say, we have the following steps:
The Freq value | Define PWR lvl | Set the Modulation Type. Set the Modulation ON / OFF. Setting the output RF ON / OFF
For the selected user Tests say that we have Test (0) | B test (1) | C (2) to test (Test A & C requires Modulation, B does not work)
Here's my question:
I can't get the Freq VALUE | The VALUE PWR lvl | Value RF Power on / off to run installation of prerequisite for the evaluation of logic GOLD. (i.e. residents.) TestSelected == 0 | 1. 2)
Ditto for the Type of Modulation Set | The value of Modulation on / off (ie the inhabitants. TestSelected == 0 | 2)
Thanks in advance for any help provided.
Chazzzmd78
people of the country. TestSelected == 0 | 1. 2 would be at the local level. TestSelected is 3. You're doing a bitwise operation GOLD on numeric values, then the comparison.
You need
(the inhabitants. TestSelected == 0) | (the inhabitants. TestSelected == 1) | (the inhabitants. TestSelected is 3)
-
LabView: I am unable to extend the evaluation period
This is the Version of LabView 2014 14.0.1f3 (32 bit). [Edit] And running on Windows 7 Pro 64-bit SP 1 on Intel Core I7 and 16 GB of Ram
I downloaded via LabView Maker Hub and installed without problem. There is a period of 7 days by default, and an offer to extend the 45 day trial period evaluation when LabView initially starts.
I answer Yes to the prompt that starts a Wizard of assessment OR. I am asked to identify you with the account OR username and password what I do. The next panel me asks to enter essentially personal and company, name and address information, and I do this also filling in all required fields.
But when I hit him then this Panel displays "Attention: errors found during processing your form." Check the changes below.
But there is no error shown on the form. Anything red or highlighted or identified in some way. All information is valid and all of the required fields completed. The empty field is only the second line of the address which is optional. I get the same result even when I fill this area. I searched the forum for this error message but no luck.
I think I'm stuck. If I have to cancel the wizard for LabVIEW to start very well. I hope someone can help me to overcome this hiccup before my 7 days are up.
Thank you very much!
Hello
Here is a document that could be useful for you. He explains how extend the evaluation of a product.
http://zone.NI.com/reference/en-XX/help/371136H-01/NILM/HTML/eval/
I hope this helps!
Best regards
-
How to get the evaluation version of labview for linux mint
Hello
Can anyone suggest me how to download the evaluation software of labview 2014/15 for linux mint?
I knew the trial versions are only available for windows.
Thanks in advance
Best regards
Manasa M
According to this information, the Mint is not a Linux Distribution supported: http://www.ni.com/product-documentation/52786/en/
I can't find the linux version on the page of downloads-I suggest you ask OR through your local office to see if they can provide you with a copy.
-
I've been running windows 7 64 bit with SP1 and all the updates that are known for 10 months without any problem. Now, a 'non-genuine windows' malware appear and other software (Acronis) not said this is the evaluation version when it's the fully paid for version. What should I do to solve this problem. Rick Rickard
You must read the user final license agreement and you will find that the OEM licenses have restrictions. You need to understand.
If you want to move windows from one computer to another, you need a full commercial license.This same problem is again this morning on another computer where he runs a real operating system from microsoft, Windows 7 32 bit SP!, more than 4 months. Today he says that my win 7 op sys is not authentic. This computer has been customized built so I was the first to install a sys op on it.
After a diagnostic for the analysis report. -
the evaluation of aci software has problems with net.framework 3.5.1 can I download framework 4 and run at the same time as 3.5.1
the computer has windows 7 64 bit.
IPEC software crashes and the error says that it has to do with the 3.5.1
.NET 3.5 is part of installing win7
.NET 4 and above is installed via windows update, important updates, and if your windows update is running, would have had to already be installed.
Installing .net 4 does not .net 3.5
-
A Manager may ask a third party to be part of the evaluation
Gurus,
We are implementing PMS in R12.2.3
We have a requirement that if a manager can ask a third party or a participant to be part of the evaluation process?
Is this possible via the seeded approach?
BR,
S
In R12.1.x, system allows the Manager to add a participant/person in the evaluation process (step 2, add Participant) while to introduce him.
Hopefully, similar functionality would be there in R12.2.x.
-
CC only allows me to install the evaluation version of InDesign on my MacBook but I plan of the student and installed the correct version of InDesign on my iMac. What should do?
Hello
Please see the following links for this issue
Adobe Creative Cloud apps back in test mode after 2015 set CC to update
The activation and deactivation of Adobe problems
Troubleshooting of Activation creative cloud (solved 99% of the questions)
-
I bought a new computer, I had a subscription on the old computer. So I put on my new computer. It worked fine but since yesterday to publish this message "Login Required" mandate the evaluation software. I don't understand why, what can I do?
Hello
Please refer to activation of Adobe Creative commune Solve cloud (login) and questions (disconnect) disabling or error messages
-
I buy the Adobe Creative cloud and paid, but when I downloaded and set (photoshop CC), he still appeared "is the evaluation version and cross the date limit.
Hello
You can also see Cloud Creative applications back in test mode after an update until 2015 for CC
Hope that helps!
Kind regards
Sheena
-
Hi, I got my subscription for the year running last for Photoshop and Lightroom. Because I had the good idea to download the version of Photoshop CC 2015 (I thought it was just an update...), I get to the evaluation period.
I would like to know, when this period expires, will I get my purchased version back or should I get a new subscription?
If I get a new subscription, one is cancelled automatically, or do I have to do something else?
Thanks a lot for the answers!
If you are subscribed to the creative cloud, Creative Cloud 15 updates are included.
If when you updated, all or part of the CC apps show 'trial start or buy now' in the creative cloud desktop application, please see this link:
https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html
-
the evaluation mode, I can download only 32 bits
the evaluation mode, I can download only 32 bits
Please the steps mentioned in: https://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html .
-
Availability of the applications Upload\Download features after the evaluation period
I hope last Q today!
Is the availability of a feature file applications Upload\Download after the evaluation period?
Plan would be storing VMS locally and upload and add to the inventory if necessary.
I have searched for an answer but find it difficult to get clarity on what are deleted after the assessment features.
Don't worry, browser data store is available in all editions.
Instead of up - / download, you can also consider to export/import the virtual machines as OVF (from the file menu).
André
-
What is the evaluation version of Adobe Illustrator CC 2015 inclueds all the features of the paid version?
Yes, he does.
Only difference is that, it will expire in 30 days.
Maybe you are looking for
-
Fake email re iCloud? Which can do declare?
Received the email which I suppose is can? Is there a specific Apple supported address questionable emails like below can be sent for review / reported? Note that the following Https address is actually pointing to a different URL. I can provide more
-
in FaceTime speechless leave the mobile phone... Why?
I try to use the FaceTime App, when I call someone, my voice doesn't leave my cell phone, which means that nobody can hear me. I tried to fix it by all the parameters available on the phone, but I still can't find the sentence. My voice is heard when
-
Stream HP 200-009: replace SSD (hard drive) and reinstall Windows and drivers
Hello My warranty is over a few months ago and I need to replace my HARD drive which is unnecessary, because all the space is taken by the OS, I can not upgrade to Windows 10. Could you please help me how to recover my key Windows and drivers HP befo
-
But I can send emails blackBerry Smartphones Am don't get not
Since September 28, 2016, around midnight my black Berry curve ceased to receive emails, I tried as well as removing the battery, removal of e-mails and then add them back, but all have failed. What is happening to only gmail accounts may only please
-
Emails from blackBerry Smartphones delivered to several mailboxes?
I have my "BOLD" series up for my 3 email accounts. It works fine, but it seems that all my messages wind up together in their own Inbox on the "BOLD" as well as in my Inbox of BB. I tried to disable the option "forward" under the filters in the In