Power lines

Similar Questions

• Security to share an internet connection by power line

  I changed my wireless router to wired home network via the electric lines of the House. How secure is it? The network administrator sees my internet traffic?

  The reason why I ask this is that my Bank Web site would not show me my statement. When I called the Bank, they reported that there was no problem.

  I can't find information on the safety of the power line networking on the internet.

  Any guidance or help would be appreciated.

  Lyonhair

  you use an Extender ethernet via the sockets in your home?

  This threshold has to go through a router, it is "too safe" because it is the same network. Power line offers no extra or any security less security, just another method to connect to the same router.

• Several networks of power line can exist simultaneously in the same electrical circuit?

  Several networks of power line can exist simultaneously in the same electrical circuit?

  Thank you

  Yes, as long as you change the encryption keys can have simultaneous powerline of the networks.

  If two units with the encryption key "HomeplugAV" does not connect with two other units with the encryption key 'HomeplugAV2', but the two pairs will work independent of each other.

  Hope this helps

• is the power line Networking is a good idea to build werkgroep netwerk with windows 7

  Hello

  1-is the power netwerk line is safer than wifi or it has also some drawbacks.

  2-can we replace cables in small business with power line newterk adapters or it is not a good idea.

  3 can be power supply adaters also suspect to sniff.

  Thank you

  Johan

  "Broadband PLC" was the provision of access to internet via incoming food, not something that was very common or successful.

  Your proposal is entirely internal is so different, for example, they refer to it "are on the same range" as ADSL. HomePlug PowerLAN solutions do not have something like this beach as it is designed to work with a main inner ring.

  Yes, the technology is much improved and the standards are now closely identified. Most units also offer an encrypted mode that allows only of these units in a group sure talking to each other.

• Get rid of power lines...

  In the past 18 months, I ran across a tutorial Adobe TV describing how to remove the power lines in an image, but I can't find the show. Does anyone have a method and more just by using the cloning tool?  Alternatively, see the tutorial?

  Thank you...

  Perhaps mean you this video? http://www.Photoshop.com/people/Bryan/posts/remove-power-lines

• Error of frequency power CC LV power line driver

  Hi all

  I'm trying to use the frequency line vi in the niDCPower driver. If I use initialize it with vi channels and set one channel then I have no problem but if I try to define several channels the PLF vi gives an error "BFFA0044 required channel or repeated feature name. Can someone explain why this vi gives this error when multiple channels are defined in the initialization stage? I checked SFP power DC and this attribute is settable only in one place and apply, as you would expect, all channels, so I'm a little confused why this error occurs.

  Thank you

  Nick

  Hi Said,

  Just to tell you that I have updated to the latest versions of MAX and DC power, and the problem disappeared so it was version somehow. Interesting upgrade notes do not mention this in the list of the fixes of the new version brings, but in any case, it's all good now.

  Thank you

  Nick

• MacBook is not even connected to the power line.

  My new MacBook was working properly until yesterday. Today, it took a lot of time to get and display something on the screen. Now it does not start (no display screen or sound) even when connected to the electric network.

  TRED was no case as a fall or similar.

  Any ideas of what it may have caused? How to proceed?

  Take a lHave you already tried the steps proposed by Apple?

  If your Mac will not turn on - Apple Support

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

  Apart from this, take a look at this article from Apple and follow the instructions to reset NVRAM shown here:How to reset the NVRAM on your Mac - Apple Support

  Try resetting the system management controller: https://support.apple.com/en-us/HT201295

  I hope this helps!

• Is it possible to use the power line is in PlotText?

  Hello

  I was wondering if I could print two lines just below the other on a chart using PlotText control and a jump in the line text string? Unfortunately, I could not do it using "bla\r blah" or "line1\n line2 '... Is there such a possibility?

  Thank you

  Wolfgang

  Hi Wolfgang,.

  Unfortunately, the current PlotText function does not support the escape characters. This is a known issue and should be resolved with the next major version of the CVI. I'm sorry, that there is no better solution for now.

  Best regards

  Peter

• Series C - API - power line

  Hello

  Someone at - it experience in integration with biamp nexia VC for codec C90?  I can't telnet in RS232 port and run the command but not with nexia VC command line.

  Because we do not know what 'symbol' command line representing "enter" in the PC telnet session.

  Enjoy you can share with me information on it.

  DV

  OK, "\n" is equivalent to 0x0A in hexadecimal.

  Happy that the issue has been found

• Second request; How to remove a power with PS CC line canyou?

  Hello

  I know there is a great new feature in PS CC (I used before!) but I can't find any explanation on how to do!

  The question is how remove, an image, a power line or a line telephone by symply clicking on both ends of these lines in order to remove?

  Thank you

  Serge
  

  Healing Brush while holding down the SHIFT key

• Satellite A200 - denying power to the top

  Hi, we have a Satellite A200 that worked very well until the last time we it turned off (from the start menu). Now he simply refuses to be able to save - seeing power line turn on once it's in, but that's all.

  Any tips?

  Thank you

  Joseph

  I have a tip for you, but I m not very good if it will work.
  However, it s worth a try.

  First, remove the battery and unplug the AC adapter.
  Then, you need to wait some time (1 hour).

  Then connect the power adapter to the computer (try it with & without the battery)
  Crossed their fingers and try to turn on the machine.

  Good luck

• Draw the line at the location of the specific angular Tower

  People-

  I have a bmp as shown on the seal and a known angle image.  I need to place a mark / arrow on the circumference of the circle to the specific known angle.

  

  Is there an automated way to mark the angular location along the circumference knowing the angle with the screw of the Vision?

  (The measure in Vision Assistant tool offers a way to really measure an angle between two lines (I think it's what he does to my playing with it).)  Is there some emanation of which can be used to help here?)

  Thank you

  Don

  Folks - this is proving to be a very reasonable problem to solve and I had the time today to spend on it.

  Here are the basic steps:

  (1) (use IMAQ find circular 2 edge to get describtion of circle with RADIUS and Center (use ID or OD - your preference edge until edge strength is pretty good in both directions)

  (2) calculate the coordinates of the point circumference associated with angle of interest using VI attached (I had adjust the direction which is the reason why I add 180 degrees from the angle of entry)

  (3) use IMAQ Overlay line with coordinates the circumference point and coordinates of the Center

  (4) output power line IMAQ superimpose your vision Image

  

• Modbus/TCP connection to the controller of power Eurotherm EPack

  There are examples of how to connect to a power controller Eurotherm EPack a modbus/TCP connection?

  I downloaded the Modbus LabVIEW ni_lib_modbus_library library - 1.1.3.32.vip and installed using VIPM.

  However, I am not familiar with the Protocol modbus and terminology such as coils, keeping records.

  I can't even properly run examples for Modbus master and slave to this library :-(

  Most important for me now is just to read the value of the artwork process.

  "ITools" Eurotherm controller software provides information about something I think are an address of memory the value of process I want to read.

  However, I have no idea how to set the various parameters to get successfully connect and read the value of the process.

  Trying to solve my problem, I managed to have basic communication and engineering data conversion.

  Now I can read values of process as the power line frequency, voltage and others.

  Once you know, it's very simple (once you have the modbus library)

  Some things that remain unclear:

  -What values are 32-bit and 16-bit?

  -is the method of addressing identical for all parameters?

  -is it the same for reading and writing?

  I would like to be able to write the target value, for example.

  I'll contact the seller for these outstanding issues. The manual is not really clear (at least not for me). He mentions that some values may be treated differenly (they 16bits, but globally, so 5001 with a scale factor of 100 means actually 50.01 for example).

  See the attachment for reading cover base.

• print one line of output to two lines - Possible or not?

  Hi all

  Could you please tell me is below possible approach or not?

  Requirement: -.

  I want to display the result in two rows, with the data in a row.

  Example:

  Select l_output1, double l_output2;

  Then my output should appear as:

  l_output1

  l_output2

  (Not as l_output1 l_output2)

  I tried like below, but it does not.

  Select l_output1. Chr (10) | the double l_output2

  but it is still printing on the same line. (Chr (10) for the new power line)

  Thanks in advance.

  Kind regards

  UVA

  Simply replace the spaces with a jump of line as:

  SQL > select REPLACE ('abc def GHI ',' ', 10 double;)

  REPLACE('AB)

  -----------

  ABC

  def

  IGS

  The above output is sqlplus in Unix, other tools may appear differently, but line breaks will be there.

  John

• How can I remove lines in my picture?

  I remember seeing an easy way to remove wrinkles as power lines of an image, but I don't remember how to do it. Can someone tell me please?

  Try the disappearance of lines with Photoshop CC - YouTube