MacBook is not even connected to the power line.

Similar Questions

• Flash Player is not to connect to the server policy file - still gives SecurityError #2048

  Hello

  I'm having a weird problem.

  Here's the situation:

  * I have a server that is running at http://192.168.0.179 . It serves as a file in flash, WebSocketMain.swf (of https://github.com/gimite/web-socket-js), who tries to make a socket connection to 192.168.0.179:5000.

  * I have a socket policy file server clocked at http://192.168.0.179:843 .

  * It works fine on the machine the server is running on (on OS X). Flash connects to the server policy files and on the server on port 5000.

  * However, on a Windows (64-bit) machine on the same network (192.168.0.175), running Flash 10.3/11.2/11.3 (and in the two Chrome/IE9), I get the following in the JS console error:

  LOG: Active [Websockets] Debug

  LOG: File [Websockets] strategy: xmlsocket://192.168.0.179:843

  [Websockets] Unable to connect to the Server Web Socket ws://192.168.0.179:5000/websockettest (SecurityError: Error #2048: security sandbox violation: failed to load http://192.168.0.179/assets/flash/WebSocketMain.swf )

  data from 192.168.0.179:5000.) Make sure the server is running and the policy file for the Flash shoe is placed correctly

  LOG: [Websockets] closed

  * I tried to modify WebSocketMain.swf to call Security.loadPolicyFile explicitly and not, but in both cases Flash Player will not even connect to the policy to 192.168.0.179 server. So it does not even attempt to read the policy file, yet still get the SecurityError.

  * 192.168.0.179:843 is opened from the machine.175. I can connect via a client Terminal Server (e.g. PuTTY) and receive the policy without problem file. However, FP simply does not want to connect.

  * I tried Security.allowDomain("*") and everything. Still nothing.

  * I tried to change the URL to which public Service will connect to (which is served by the web server) to 192.168.0.179:80. Nothing. 192.168.0.179:10000 does not work either. Even 127.0.0.1 and localhost does not work.

  I have more suggestions. This could be the cause? Why won't even try FP to connect to the policy server?

  Found the problem: mms.cfg had an entry saying DisableSockets = 1, which caused the security error.

• Satellite L650-12Z: led does not light up when it is connected to the power source

  My L650 doesn't show the white light anymore when the cable is connected.
  The connectors are clean, and the adapter does not work.

  The laptop still works on the farm (when he was still in power in).

  Also without the battery, there is no white light indicating that the laptop is connected to the domain controller.

  Anyone know what could be the problem and how to solve?

  Hello

  Battery is charging while the AC adapter is plugged?
  Are you sure that the adapter is OK?

  If the battery would be charged correctly and if the laptop works ok, only connected to the power adapter (without the battery) the a problem with the frame of the LED may be possible
  But in this case only the technician must test these parts

• Windows does not load and displays a black screen when it is connected to the power supply

  Original title - Windows Vista running on my laptop Sony VAIO

  Trying to turn on my laptop using the built in battery nothing happens.  When the laptop is connected to the power supply and turned on Windows does not.  It shows something in the sense that it does not properly off.  It tries to load back to a system restore point before the last stop, but seems to fail again during this process.  All that is displayed is a black screen. Currently the power on light is on, the battery light is on, but the drive activity light is off.

  Yet once again, I switched on the laptop and finally the Startup Repair process is automatically called.  After the display of the bar to attempt repairs, the system has been repaired successfully.  As a result, the I ran my Norton anti-virus, followed by Windows Updatesoftware.

• The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available.

  The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available. What could be the problem and how can I solve it?

  A problem better put to the support of Tosh or their forums, with regard to their equipment, not MS or Win

• recently, I intend to download, but unfortunately this is already more than 5 attempts. Thanks to the slow connection and the power outage, my download has failed to complete. Would it not possible to download the app again? Concerning

  Recently I wanted to download, but unfortunately it's already more

  only 5 attempts. Thanks to the slow connection and the power outage, my

  to complete the failed download.

  Would it not possible to download the app again?

  Concerning

  A trial version is not different from the full version.  Using your serial number to activate a trial version, the access limit is removed.

  If you get access errors thrown at you when you try to use a download link, check that you have enabled cookies and clear your cookie cache.  If he continues to not try to use a different browser.

• My Satellite goes into battery mode despite being connected to the power adapter

  Y at - there anyone out there who can help me, please!

  I bought a Satellite a couple of years ago which worked well for a while - however, it has started to overheat a lot and kept stop without reason. After many searches on the net, I discovered that the fans were very likely blocked with dust? After you clean the laptop worked like a dream and as a Bunny happy I was!

  However, now a new problem has been its ugly reappearance - for some weird reason the laptop suddenly, without warning, past in dominant mode of battery despite being connected to the power adapter? He refuses to "acknowledge" that the adapter is plugged drains the battery quickly and then stops?

  I tried once more looking for an answer and it seems that I am not alone in suffering from this problem? I read that it is perhaps a bad connection between the adapter and the motherboard, but it would be expensive to fix? Others have said to try a new adapter, but I tried from another laptop and it still happens? I hesitate to implement local repair because sometimes, this problem may occur after half an hour and other times, that won't happen for hours and hours and it is difficult to explain the problem?

  There seems to be no rhyme or reason, but to crazy me on a regular basis!

  HI Deb,

  It is a common problem and can have several causes. The most common are a common defective soldering on the motherboard (where the socket is attached) and it can also be caused by a bad connection between the AC plug (at the end of the cable) and the socket on the laptop.

  Unfortunately, the standard response from most repairers is just to replace the motherboard, probably because it's faster for them and produced more revenue that comes to fix the connection.

  I solved this problem on my SA30 by pinching the cable ca to the back of my laptop in order to prevent any movement or tension on the connector. Unfortunately this will not help if the socket is already damaged, but it can reduce the incidence of the problem to occur.

  Kind regards

• Hanging Windows desktop and does not, online or off the power. I have to use the task mgr constantly to "shake" the windows to startin

  Original title: Hello I have an xp pro sp3 dell dimension 2400. Hanging of Windows desktop and does not, online and off.

  Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

  I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

  I have xp of the process and have nothing wrong.

  Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

  Any suggestions would be greatly appreciated.

  Thank you! :>)

  Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

  I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

  I have xp of the process and have nothing wrong.

  Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

  Any suggestions would be greatly appreciated.

  Thank you! :>)

  The image (it back up to an external drive as full image) and reinstall Windows XP, update, drivers and everything.  Install any plugins that you NEED to do all that you see here that the bat hurt.  If the problem no longer exists, something has gone wrong with your system from before (corrupt files or your cleaning is not as complete as you think) and if the problem persists - probably something to do with the material. In all cases, you can return to the image if you wish.

  To the extent wherever it is the registry, I must ask, * how * you have come to this conclusion?  Not that I'm defending something - I was wondering what you did to decide who is not your registry database?  (Side: I agree with you.)

  That's what * I * would call cleaning and optimization of a Windows XP machine:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Scenario is,

  1. smart card reader is connected to the VM with card inserted in

  2 initiate a prompt suspension of the VM toolbar

  3. now to resume the virtual machine by using vmrun command into the host machine

  WS t vmrun start xxx.vmx

  Now, the recovery of VM but the smart card reader that was previously connected does not work properly in VM that is to say, sometimes after CV chip card reader driver is uninstalling and a few other times, chip connected to the drive is not available on a virtual computer

  My requirement is after power, smart card reader can stay connected to the virtual computer with the already installed driver and the smart card.

  Kindly help with this problem.

  Host operating system: Victoire 2012 R2

  The VM OS: win 10 x 64

  Thank you!!

  Dear all,

  I had a work around for this problem. By adding "usb.autoConnect.device0 ="0xVID:0xPID"" this statement to the VMX file, solves this problem, that is, whenever the VM is wake-up by clicking on the link CV or using vmrun commands, it connects the unit in question automatically and it is charging correctly with his driver. Obtaining smart card detected after sleep\hibernate with no problems.

  VID & PID is respective ID of the device that can be seen in the properties of the Device Manager "Device Instance path".

  For more information about this, visit VMware KB: automatic connection of USB devices to the virtual machine power on

  ~ Surendra

• I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

  I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

  I put in place already to extend the wifi of my modem still connected to the modem via ethernet cable.

  Now I want to be considered on the floor and use it to extend the wifi without ethernet cable

  The AirPort Extreme can extend only wireless signal from another router from Apple, so if you want to take the AirPort Extreme on the floor and extend wireless signal, you will need another airport connected to your modem by Ethernet cable router to produce the wireless signal that will extend the extreme on the floor.

  Another way of saying the same thing would be to say that if you want to extend wireless using a router from Apple, you'll need two of them do... because AirPort Extreme is not compatible with a third-party modem or modem/router for this purpose.

• I need a few files to restore from a time machine backup to a different MacBook Pro that is connected to the same network

  Hi, I recently "lost" my MacBook Pro because of water damage.  Fortunately, I've been using time Machine\Capsule and I have a MacBook Pro that is connected to the same network/device.  I need to restore a few files in the backup TM of the computer 'lost' on computer 'work '.  I was able to 'Browse' the other TM backup (click the icon TM plus the button 'Alt').  The Web browsing is extremely slow (took about an hour to break down / find the file on the network).  However, I tried to copy the file and I get errors of the alias.   Please advise me on what I am doing wrong.

  Thank you

  ggnpeter

  PS My OS is 10.9.5

  Visit Time Machine FAQ of Pondini helps with Time Machine.

• Satellite A500 - battery light flashes when connected to the power supply

  Win 7 Satellite A500 PSAM3A-03P00E.

  Battery light flashes when connected to the power supply (intermittent fault), when I disconnect the sector and reconnect the flashing stops and battery (high capacity) continues to receive.

  Also, when battery light blinks the keyboard backlight stays on when it should white and if the backlight is turned off and the battery light starts to blink the keyboard backlight turns on, all other functions seem to work well.

  Charges of battery and the wedges load properly (when the battery flashes).

  Hello

  Have you noticed this problem since the first day of purchase?
  Theoretically, it could be possible that your battery begins to malfunction
  On the other hand, an electrical problem could also be possible

  However, try this:
  Remove the battery and the AC adapter. Then press and hold button power 30 sec long.
  Then insert the battery and plug AC adapter still does that help?

  By the way: this is the BIOS updated? If this isn't the case, perform an update.

• After the last Windows 7 Corel Draw update gives the error: your computer may not be connected to the internet

  After the last update of microsoft don't work plugin CorelDraw Whatthefont. Use corel capture. I can see only: your computer may not be connected to the internet or you may have a firewall installed that blocks access to the internet.

  We try on Windows 7 and Windows XP, the two are not working. In Corel forum have said, it's the beginning after the last microsoft update.

  Can solve you?

  Sorry for my English.

  Thanks, problem was in router (probably). During weekend router died, now we have new (same type) and it s working on two PCs.

• The computer is not automatically connect to the printer

  Sorry, I don't know exactly where to put this question, looking for any help I can get.

  Hi, I work with someone who has a range of printers hp 2035 connected to a desktop computer running windows vista. another person has a laptop running windows 7. It obviously takes the laptop home, and every morning when he connects to his computer laptop back to the network it can see the printer, but not to print on it. HOWEVER, it can print a test page, and after that, it is good to go, until his laptop computer goes idle, date to print a test page to print again to it.

  Looks like the computer is not automatically connect to the printer, but idk a permanent solution, guessing just a bit at the moment and it made the test page thing, but is a bit of waste paper right? any help would be appreciated.

  Original title: thing of strange network printer

  Hello

  Method 1: Run the network troubleshooter, and see if it helps.

  Using the network troubleshooter utility in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  I suggest you perform the steps described in the article:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows    

   

   

  See also:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  I hope this helps.

• You are not currently connected to the Oracle BI server

  Hi I am facing problem while that connection in the page of answers... Here is the message I get... Please someone help, what could be the matter, thank you

  	You are not currently connected to the Oracle BI server. If you have already logged in, your login may have expired, or a communication or a server error occurred. To reconnect, click here. If the problem persists, please contact the site administrator. »

  Hi Ram,

  My question was resolved, it happened because of OPMN services are low.