form table - displays the number of lines using LOV static

Similar Questions

• BI Publisher - how to display the number of lines displayed at the bottom of the table on each page

  Hello

  We are the conversion reports Actuate BEEP and not able to understand how to view "Accum.Total = < n >" at the bottom of each page. In the attached report to operate it, "Accum.Total = < n >" must be displayed at the bottom of each page where < n > is the number of lines displayed on the current page and previous page.
  
  For example, if there are 10 rows in the result set, if the 1st page displays 4 rows, 2nd page displays 3 rows and 3rd page is 3 lines and then Accum.Total = 4 on page 1, Accum.Total = 7 on page 2 and Accum.Total = 10 on page 3.
  
  Note that we use the property table "allow the lines to break Pages = False" as we do not want a specific line can be split across pages.
  
  I enclose a sample of report actuate, rtf, BEEP and XML report for testing file.
  
  Approach used so far-
  
  1 > I tried to put the counter in the footer, but it seems that only the fields that come directly from the IC can be used on the header/footer. No matter what form text field or variables defined in the report.
  
  2 > I used approach given in the link below. Using this approach, I am able to view a coded value hard at the bottom of every page (just below the table) but his does not work for the variable (in my case the counter c1).
  
  https://blogs.oracle.com/xmlpublisher/entry/continued
  
  3 > on Google, I found a few articles on the page break conditionally as display only certain numbers on a page or the page by section break but in our case, its dynamics and its number of lines to display on a page is driven by data, so I could not think of a certain condition to use in "Condition." ": If" for use as a page break.
  
  Thank you

  Richa
  

  Watch see the-Report

  http://docs.Oracle.com/CD/E28280_01/bi.1111/e22254/create_rtf_tmpl.htm#do_bf_cf

  Download the https://blogs.oracle.com/xmlpublisher/entry/continued sample

  Add

  <>

  name = "contd_footer".

  format = "99G999G999" / >

  After the field "Footer."

  If need to use a footer to display the meter then and sous-modèle with code above and call it in footer

• Display the number of lines based on a line selector

  Hello
  
  
  We have a form on an sql query. We are currently showing 100 lines per page. We would like to have a line selector, so the number of lines displayed on the page depends on the value selected in the line selector. I'm not sure how this is possible.
  
  Thanks in advance,

  Hello

  It is relatively easy to set up - see: [http://apex.oracle.com/pls/otn/f?p=267:111]

  There are 4 steps to create this feature:

  1. create a "select list with Submit" on your page called, say, P111_ROWS. The source of the list value:

  STATIC2:10;10,20;20,50;50,100;100,200;200,500;500,1000;1000,All;1000000
  

  (Of course, you can change these values according to your needs)

  Display Set Null and display additional values to no.

  2 create a calculation on your page that defines the new element value static assignment of, say, 10. This calculation should depend on the element is null (this simply sets a default initial value)

  3. create a branch of page that links to the same page and check the option reset Pagination

  4. on attributes of the region of your report, enter the name of your new item in the parameter 'Number of lines (element)' - I also clear the value in the parameter 'Number of Rows.

  This should be it!

  Andy

• How to display the number of lines of time giving the values of the columns?

  Hi all
  
  I want to display the number of rows times the value exists in the column num in the query below
  
  
  

  with t AS
     ( SELECT 'venkatesh' NAME, 'hyd' LOC, 2 NUM FROM DUAL
       UNION ALL
       SELECT 'prasad' NAME, 'hyd' LOC, 3 NUM FROM DUAL
       UNION ALL
       SELECT 'krishna' NAME,     'hyd' LOC, 1 NUM FROM DUAL )
    SELECT T.* FROM T
    CONNECT BY ROWNUM <= NUM
  
  
  Expected output:
  
           venkatesh            hyd      2
           venkatesh            hyd        2
           prasad                 hyd        3
           prasad                   hyd      3
           prasad                   hyd      3
           krishna           hyd       1

  Published by: Nag Aswadhati on November 1, 2012 12:34

  Aswadhati NAG wrote:
  Hi all

  I want to display the number of rows times the value exists in the column num in the query below

  Expected output:
  
  venkatesh            hyd      2
  venkatesh            hyd        2
  prasad                 hyd        3
  prasad                   hyd      3
  prasad                   hyd      3
  krishna           hyd       1
  

  With the help of connection by: -.

  with t AS
     ( SELECT 'venkatesh' NAME, 'hyd' LOC, 2 NUM FROM DUAL
       UNION ALL
       SELECT 'prasad' NAME, 'hyd' LOC, 3 NUM FROM DUAL
       UNION ALL
       select 'krishna' name,     'hyd' loc, 1 num from dual )
    select t.name, t.loc
    from t
    connect by level <= num
           and name = prior name
           and (prior sys_guid() is not null);
  
  NAME      LOC
  --------- ---
  krishna   hyd
  prasad    hyd
  prasad    hyd
  prasad    hyd
  venkatesh hyd
  venkatesh hyd 
  
   6 rows selected
  

• Is there a limitation of the list of selection display the number of lines in the report in the apex?

  In my report, I'll run the application process, it is not display 34 rows in the data, but shows only 3 rows that too hardcode rownum < = 20

  the query run perfect in backend

  FOR rec IN (select distinct class_name, id r

  from table_name

  where country_id = (select distinct domicile_country_id of ()

  Select domicile_country_id from table_name table where id = l_ser and domicile__id is not null

  Union

  Select domicile_country_id from table_name table where id = l_ser and domicile__id is not null)) and rownum < = 20 order by 1

  )

  Help, please

  Thanks to all the problem showed lines but the symbol '&' in one line appeared the problem so

  used REGEXP_REPLACE (column_name, ' [and] +', 'and' ') and its done

• JDeveloper 10.1.3.4 af:table displays the number of rows of erratically

  For the experienced:
  
  There are several pages in the web application I developed using JDeveloper 10.1.3.4, and it allows the user to navigate between the pages back. A page displays the selected rows of a database table, using the af:table component.
  
  To display all the rows returned by the query in the underlying object in the view, I put the Rows of the af attribute: table to 0. However, rather than show lines as expected, the currently displayed lines are.
  
  1. when the user connects and starts a new session and accessing this page for the first time, the table on this page shows all lines (with the database I check the problem now, ago total 31 lines selected in the database table and all 31 lines are displayed).
  2 but if you leave this page, then come back, it shows only 10 lines and the top and bottom of the table actually appear dimmed (i.e., not in use) links "previous" and "next," which did not appear when you went to this page for the first time in the session. And there is simply no way to see other 21 pages.
  
  I thought that the attribute can be defined as lines =-1 and tried. But - 1 is not accepted. So I tried to place the lines = 25 and ran the application. His behavior is as follows:
  
  1. the first time in a session you navigate to the page, it works as you would expect with the lines = adjustment 25.
  2. When you leave the page and return, it shows the lines 22-31 and lets you click to display 'previous 21. However, if you click on this link, instead of display lines 1-21, it displays lines 1 to 25 and from there, works as you would expect with the lines = adjustment 25.
  3 leave the page and come back, it shows the lines 21-31 and displays the 'previous 20' link. A click on it and you do not see lines 1 to 20, but lines 1-25. Again, from there, it works as you would expect with the lines = 25 setting, until you leave the page.
  
  What could be wrong? And is there a solution to this problem?
  
  Thanks a lot for your help!
  
  
  Newman

  Hello

  just played with him a bit... looks like you did not for the iterator in def-1 page as the size of the beach:

  with that, I tested table with lines = 0, as well as 25 and it worked ok...

  Kind regards

  Branislav

• Add a table with the number of lines and columns JS

  Hello

  Simple question: what is the syntax for adding a table with a specified number of rows and columns? I don't get it. (I don't know how to add them later, but I want to do when I create the table). Here is the entry in the ESTK:

  Tables.Add (to: LocationOptions, reference: all, withProperties: Object): array

  Creates a new table.

  (optional): Data Type: LocationOptions, by default: LocationOptions.UNKNOWN
  The location of the new table to the object within the container object or reference. (Optional)

  Reference: Data Type: no
  The reference object. Note: Required when the value specifies before or after. Can accept: Table, XmlStory, XMLElement, TextFrame, text, character, Word, line, paragraph, TextColumn, PointInsertion, story, cell or TextStyleRange. (Optional)

  withProperties: Data Type: object
  Initial values for the properties of the new Table (optional)

  Thank you

  Ariel

  After much experimentation, I found this works:

  t = app.selection [0].tables.add (LocationOptions.AT_BEGINNING, undefined, {columnCount:2, headerRowCount:1, bodyRowCount:5, footerRowCount:3});})

• Display the number of lines

  Hello!
  
  I use JDeveloper 11 g Release 2 (11.1.2.3.0).
  
  Here's an easy question. For now, I have this request:
  

  SELECT Sale.SALE_DATE,
         Sale.SALE_PRO_ID,
         Sale.SALE_ID
         Product.PRO_ID,
         Product.PRO_NAME 
  FROM Sale, Product
  WHERE (Sale.SALE_PRO_ID = Product.PRO_ID)

  I want to show a table like this:
  

  Unit Sold        Product Name
  52                 Prod1
  41                 Prod8
  30                 Prod3
  18                 Prod15
  5                  Prod2

  Can someone show me how do? I'm neawby in SQL...
  
  Thanks in advance!

  You mean like this:

  SELECT
         Product.PRO_NAME , count(*)
  FROM Sale, Product
  WHERE (Sale.SALE_PRO_ID = Product.PRO_ID)
  group by Product.PRO_NAME
  

  ?

• How to get the number of lines of an af:table

  Hello

  I use JDeveloper 11.1.2.4.

  I have a table (t1) that is contained in a panelCollection. On the toolbar of this collection of Panel section, I placed an output text to display the number of rows in the table. I use below EL from there to achieve.

  < af:outputText value = "#{bindings." RtnVwOddShoesVO1Iterator.estimatedRowCount}"id ="ot11.

  partialTriggers = "t1" / >

  his shows the number of rows in the table when initially rendering. However, when none of the lines changes based on a condition, it is not be updated.

  Please can you advise if Miss me something?

  Thank you

  Bind the outputText property of bean of support, I say the pair of methods getOt11 () / setOt11 ().

  Then you can say:

  AdfFacesContext.getCurrentInstance () .addPartialTarget (getOt11 ());

  If it works, can you say thanks @Timo ;-)

• Is it possible to change the number of lines to display in the query of the adf?

  Hello

  is it possible to change the number of lines that appear in a query of the adf that is similar to a form of the adf?

  I need about 5 lines per column rather than display all the fields in a single column to display? Thank you.

  Hello

  What do you mean that it didn't work? Attributes of how you have in the Panel of the query? Maybe you have fewer number than the combination or lines and the properties of the argument maxColumns attributes.

  Try again with

  and see if you are able to get everything under a single column. If you get, play with these two properties to get the desired result.

  Arun-

• Displays the number of rows in the table displaying a named criteria query data

  I created a test named for my View, called 'Criteria1' and Criteria1 to create a group of ADF with Table query. I want to display the number of rows in result when a search is performed. How can I do?
  
  Thanks in advance,
  Tom

  As mentioned, you can add outputText and you must give OutputText partialTriggers as query component your Id. Thus, when you give a search on the query component, it will refresh the outputText with the number of lines.

  
  ID = "ot1" partialTriggers = "id of the component of motion here" / > ""

• divide the table based on the number of lines

  Hello
  
  I am trying to split a table based on the number of lines and then treat.
  Say I have a TEST_XXX table that contains 50 lines, what I would do is.
  to access multiple lines of 10. How can we achieve this?
  
  What I thought is, once the table is created and the line are filled.
  Add a new column to the table and perform a procedure that inserts of 1 to 10 first lines
  and 2 to 10 lines and 3 to 10 next ranks... etc. Based on this, that we can treat
  the first set of lines then play next or etc...
  
  is there a better way to do it?
  
  Code to create the table:
  

  CREATE TABLE TEST_XXX
  (
    A_ID   VARCHAR2(10),
    B_ID   NUMBER,
    c_ID   VARCHAR2(10),
    D_ID   NUMBER
  )

  Code to add lines:
  
  

  DECLARE
  BEGIN
    FOR I IN 1..50
    LOOP
        INSERT INTO TEST_XXX VALUES('ABCDE',123,'ZYXWV',321);
    END LOOP;
    COMMIT;
  END;

  The original problem is, I have a huge table, and I write a sql query to process,
  When I treat him by selecting all the values in the table, it is very slow.
  But when I have treat small Coulon (say 100 rows), it works very well.
  That's how I got the approach described above in mind.

  You can use NTILE.

  See:
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/functions101.htm#SQLRF00680
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:47910227585839

• count the number of lines without using the count function

  Hello
  How count the number of lines without using the count function?
  
  Thank you

  Assuming that your statistics table are updated:

  select num_rows
  from   all_tables
  where  table_name = 'YOUR_TABLE_NAME_IN_UPPERCASE';  
  

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14237/statviews_2105.htm#REFRN20286

• Function to find the number of lines to display by the foreach loop?

  Hi all
  
  Is it possible to find the number of lines to display per the foreach loop in the rtf model?
  We need to get the number of rows without using the count() in the xml file.
  We do some calculations based on the count in the rtf model.
  
  Thanks in advance

  Paste your file xml here, patients show us how count.

  You can count the number of lines.

  use

• Get the number of lines to different tables on the same line

  How can I get the number of lines for the different tables in a single line:
  
  SELECT count (A), count (B), count (C) table tb_a A, tb_b B, tb_c C;
  
  Thank you!

  Maybe if you want a little sophisticated look ;)

  select *
    from (select 'a' tbl_name,count(*) cnt
            from table_a
          union all
          select 'b' tbl_name,count(*) cnt
            from table_b
          union all
          select 'c' tbl_name,count(*) cnt
            from table_c
         )
   pivot (max(cnt) kount for tbl_name in ('a' as tbl_a,'b' as tbl_b,'c' as tbl_c))
  

  Concerning

  Etbin