PowerConnect 3548 - change port access mode?

Similar Questions

• IO access mode

  Hi guru
  
  I have a few questions about the Access Mode in essbase
  
  How can I check the I\O Access Mode? How can I change the access mode IO buffered direct IO mode? It is advisable to use Direct i/o for retrevial mode faster as cache memory would lock for index file
  
  Any information on this would be helpful
  
  Thank you

  Here's a decent thread on the subject: understanding buffered of i/o and direct i/o

  Personally, I never use it, but it is a sample of one. It used to be very bug and I never really found a need for him.

  You can search for additional threads - it was discussed a bit.

  Kind regards

  Cameron Lackpour

• change in Dynamics car for access mode will disable DTP effectively?

  Hi all

  "n a switch basis spoofing attack, the attacker takes advantage of the fact that the default configuration of the way of the switch is dynamic auto.". The network attacker sets up a system to spoof himself like a switch. This theft requires that the network attacker capable of emulating 802. 1 q and DTP messages. By encouraging a switch in thinking that another switch is trying to form a trunk, an attacker can gain access to all the VLANS allowed on the trunk port. »

  My question is. East-configuration of a dynamic to access the port DTP stop auto port? Or should be still the switchport nonegotiate command to run to the port in question?

  EDIT:

  • switchport nonegotiate- prevents the interface generating DTP frames. You can only use this command when the interface switchport mode access or trunk. You must manually configure the neighboring interface such as a network interface to establish a trunk link.

  I think that it answers my question, but can someone please confirm

  Thank you and best regards

  Adam

  Hi Adam, Mark,.

  Let me join you.

  As far as I know, a port set to the static access mode was disabled by default DTP. Switchport nonegotiate on a static port using access is not harmful but really does not do anything, like DTP would have been disabled in any case.

  See the following output. I have two ports, a static access a single static trunk. In the output of the show interfaces switchport , the access port said "negotiation of Trunking: Off" (which means DTC) while the trunk port reports this feature on. When I disable DTP on the trunk by using switchport nonegotiate, the trunk reported negotiating trunking as well as off, identical to what access port has had all the time:

  HQ(config)# do show run int fa0/10Building configuration...
  
  Current configuration : 58 bytes!interface FastEthernet0/10 switchport mode accessend
  
  HQ(config)# do show run int fa0/11Building configuration...
  
  Current configuration : 95 bytes!interface FastEthernet0/11 switchport trunk encapsulation dot1q switchport mode trunkend
  
  HQ(config)# do show int fa0/10 switchportName: Fa0/10Switchport: EnabledAdministrative Mode: static accessOperational Mode: downAdministrative Trunking Encapsulation: negotiateNegotiation of Trunking: Off[ ... cut ... ]
  
  HQ(config)# do show int fa0/11 switchportName: Fa0/11Switchport: EnabledAdministrative Mode: trunkOperational Mode: downAdministrative Trunking Encapsulation: dot1qNegotiation of Trunking: On[ ... cut ... ]
  
  HQ(config)# int fa0/11HQ(config-if)# switchport nonegotiateHQ(config-if)# do show run int fa0/11Building configuration...
  
  Current configuration : 119 bytes!interface FastEthernet0/11 switchport trunk encapsulation dot1q switchport mode trunk switchport nonegotiateend
  
  HQ(config-if)# do show int fa0/11 switchportName: Fa0/11Switchport: EnabledAdministrative Mode: trunkOperational Mode: downAdministrative Trunking Encapsulation: dot1qNegotiation of Trunking: Off[ ... cut ... ]
  
  

  Personally, I do not believe that an access port longer listening DTP frames. Yes, it can receive (it is connected to send link partner or not these images, right?) but reject it immediately.

  Even if an intruder connects to a switch configured as an access port port it doesn't really matter because even if the neighboring interface is set to dynamic auto / desirable Dynamics / trunk it will end up as an access port.

  
  This is true but an attacker wouldn't be using an ordinary Cisco switch that is well-behaved. The attacker would use a PC and a DTP message injector tool to try to force the other port to become a trunk, regardless of what is the other port's response. Of course, if the port at the other end is a static access port, the attacker is out of luck.
  Best regards,Peter
  

• Problem with the files not showing (after changing the USB mode)

  I have a sansa fuze 4 GB. version V02.01.09A. OS: Vista Service Pack 1. My rocket was working fine until about a week ago, when it stopped charging. but after installing the new norton 360 sansa is more appeared in my computer or Windows media player at all. I tried updating the driver but it says that the pilot was already up to date. I tried other USB ports again (front and rear), did not work. I decided to change the USB mode and it has finally started to load again in MSC mode.

  now, for the problem I currently have and, when I click on sansa via my computer and go to the music folder, it says "this folder is empty". I unplugged and watched in my music list, and all the music is there. I tried to put a new song on the player, disconnected, and when looking through the songs of the player the new song is here. I reconnected it, the new song is in the music folder, but the other songs are not listed. In addition, I have a microSD card that is listed as "o" in the car, all the songs I had on this appear, but not those on memory internal to the sansa.

  How can I get again list all music files in the folder?

  Note: I do not sync as it has only some of the songs I want on my sansa. the way I add songs is to copy and paste to the folder of the sansa player

  Okay, I don't know why or how, but it works now in MTP mode. I saw you are solutions, but I decided I'll just change the mode before trying to have ideas. until I reconnected it I also removed the microSD card, and it worked perfectly (make a backup of my songs). the problem could have the sd card in all this time?

• switchport general & switchport access mode

  What happens if a switch port is configured which switchport General PVID and switchport access vlan? That is not valid?

  It depends on the given mode control interface. If no mode command is given, the interface will follow all the instructions.

  If the access mode command is given, the access mode is followed, and large lines are ignored.

  switchport mode access

  switchport General pvid 60

  VLAN allowed switchport General add 60

  switchport general allowed vlan add 10,70 tag

  switchport access vlan 91

  If the general mode command is given, then the general lines are followed, and the access line is ignored.

  switchport mode general

  switchport General pvid 60

  VLAN allowed switchport General add 60

  switchport general allowed vlan add 10,70 tag

  switchport access vlan 91

• Trunk vs Access Mode

  I need clarification on a trunk port.  You still want to use trunk when you connect to another router?  I have an ISA550 and one of the LAN ports is connected to the WAN port on the router to another.  I've never dealt with this config help would be appreciated.

  A trunk is used when you have the possibility to be carrying several VLANs on a single link. If there is only a need for a single VLAN not marked between your devices, use the access mode. If you need several VLANs or predict the need for them in the immediate future, use the trunk.

• Cannot change the Compatibility Mode

  I'm trying to run an application on a new Windows 7 PC.  It works fine with no special settings on a Windows 7 PC identical (same model number, same OS, same OS updates).  But on the second machine Windows does not allow me to change the compatibility mode to Windows 7.  He insists on locking myself in other compatibility modes and greys and then the selection to return to Windows 7.  Worse, whenever I run the program I have to answer the nattering question "do you want the next request to make changes to this computer?  -Yes!  No matter what!  just, let me alone and run the application!

  (1) how do stop this Moguls and force Windows 7 leaves me alone and run the application?

  (2) how set the compatibility mode to Windows 7 (or eliminate the comaptibility altogther mode) for this application?

  I've uninstalled and reinstalled the app several times with no luck.

  Yes, lowering the UAC slider leaves your pc more reports unprotected, which was why I mentioned only use it as an experienced user (.. .knowing your way around your pc...)

  This problem only occurs with the .exe in question btw?

  You can still work around a problem in the registry. I found this (below) on several sites. Before you begin, I STRONGLY suggest that you make a backup of the registry . How? Type regedit in the search bar in the startmenu, then press on enter, confirm the UAC, click file-> export, choose a file name and choose where you want to save the exported .reg file, select (dot) all under Export range option, type a name for the .reg file and click on the Save button.
  ! The registry is not a place for fun if you know exactly what you are doing. You will have to pay dearly if something goes wrong!
  You can access the registry by typing regedit in the search bar in Startmenu, but you probably already know.
  ___________________________________________________________________________________________________________________________________

  All settings in the Compatibility tab can be set through the registry

  -Open REGEDIT
  -goto "HKEY_CURRENT_USER\Software\Microsoft\WindowsNT\CurrentVersion\AppCompatFlags\Layers".
  -create a new string value
  -name or rename the full path asked for example "C:\Program Explorer\iexplore.exe may.
  -Right click on the new channel and select Edit
  -type RUNASADMIN in line with value data; This will rank the program to run as administrator.
  This allows you to bypass the graphical mode of editing the parameters. Instead, you change the registry settings. And of course, you can ignore the advances
  The shortcut properties. Better start the program by default
  Administrator mode! : o ;)

  I used it for Internet Explorer (iexplore.exe) which is part of the
  System.

  A shortcut on the desktop can be configured to run as administrative mode.
  But, if I run the IE7 browser, leave a link URL or Favorite, that this doesn't
  work and Windows Vista it will run in User Mode... UNLESS I CHANGED
  THESE OPTIONS WITH REGEDIT. To start regedit click on Start Menu, then
  "Run...". "type REGEDIT. EXE or REGEDIT.

  Other Options and examples .
  Always in the key called a HKEY_CURRENT_USER\Software\Microsoft\Windows
  NT\CurrentVersion\AppCompatFlags\Layers you can add more variables:

  RUNASADMIN: I just said, run as administrator of the program
  : rolleyes:;
  256COLOR: run the program in 256 colors;
  640 x 480: Add this value to run a game or another application in a lower
  RES;
  DISABLETHEMES: to disable visual themes Windows 4 adds that the app;
  DISABLEDWM: Disabled Desktop Composition;
  HIGHDPIAWARE: Disable the display timing of ppp settings high;

  ELEVATECREATEPROCESS: I don't know, unknown function. : confused:

  VALUES of COMPATIBILITY (not use'em together, only by app!):
  Win95: Add the Windows 95 compatibility mode;
  Win98: Add Windows Me or 98 compatibility mode;
  NT4SP5: Mode NT 4.0 Service Pack 5 Com;
  Win2000: Tap to add compatibility mode Windows 2 K;
  WINXPSP2: Windows XP Service Pack 2 Compatibility Mode;
  WINSRV03SP1: Windows Server 2003 SP 1 com mode

  Windows also creates these chains of the option when you change the compatibility
  Settings in the properties of the selected executable (graphics mode is not
  Regedit mode).

  Found on: Forums.techarena
  ____________________________________________________________________________

  REGEDIT IS AWESOME, BUT USE IT AT YOUR OWN RISK! Start with a registrybackup!

  Good luck and we keep informed please!
  Error. Not found on keyboard. Press F1 to continue...

• I used my iMac as a hard drive backup to my macbook once. Now when I update to El Capitan he says that it cannot be updated due to being of a backup. How do I change the drive mode so I can update?

  I used my iMac as a hard drive backup to my macbook once. Now when I update to El Capitan he says that it cannot be updated due to being of a backup. How do I change the drive mode so I can update?

  If you use your iMac as a backup to disk using Time Machine look for a folder called Backups.backupdb.

  It's what keeps you upgraded your operating system, you must remove it.

  Copy everything first if you are on a different drive. It would be wise to create a backup of the iMac on another drive also.

  Check system preferences > Time Machine and make sure that the iMac is not selected as the Time Machine drive.

• How to dynamically change the selection mode of the listbox control?

  Hello everyone

  Is it possible to change the selection mode of the ListBox dynamically?

  Both cases to the attached vi works the same way. I want the listbox to change the mode of selection by 1 point when the channel selected in the drop-down list box is SET.

  Can anyone help please?

  Thank you

  Simo

  There is a property for Listboxes node called selection Mode.

  Do not use the control Terminal in one case and a local variable of it in the other.  Moving the Terminal outside the structure of matter and son in the structure of the case.

  

• [6 beeps] Due to change of video mode from Legacy to EFI

  Hello

  I changed the video mode of the bequest to EFI by accident, now F10 does not work, and there are still 6 beeps.

  So, what I can do since no singal video and F10 works.

  Thank you

  NET

  Hello:

  Go to the taking in charge of your PC and driver page, look at the link card motherboard and follow the instructions to clear the CMOS.

  Which will reset the BIOS to its default values.

• OID for PowerConnect 3548

  Hello

  I need the CPU and temperature OID for a PowerConnect 3548

  Any help would be appreciated

  Hi vetheslav,

  Here is the list of OIDS that show 35xx sensors when using 2.0.x.x firmware or later...

  Temperature OID

  . 1.3.6.1.4.1.89.53.15.1.9

  . 1.3.6.1.4.1.89.53.15.1.10

  OIDs of CPU

  . 1.3.6.1.4.1.89.1.6

  . 1.3.6.1.4.1.89.1.7

  . 1.3.6.1.4.1.89.1.8

  . 1.3.6.1.4.1.89.1.9

  OIDs memory

  . 1.3.6.1.4.1.89.29.11.1

  . 1.3.6.1.4.1.89.29.11.2

  P.S. The OID

  . 1.3.6.1.4.1.89.35.5.1.1.2

  . 1.3.6.1.4.1.89.83.1.2.1.2

  . 1.3.6.1.4.1.89.83.1.2.1.3

  . 1.3.6.1.4.1.89.83.1.2.1.4

  . 1.3.6.1.4.1.89.53.15.1.3

  . 1.3.6.1.4.1.89.53.15.1.3

  OIDs of fan

  . 1.3.6.1.4.1.89.83.1.1.1.2

  . 1.3.6.1.4.1.89.83.1.1.1.3

  . 1.3.6.1.4.1.89.53.15.1.4

  . 1.3.6.1.4.1.89.53.15.1.5

  . 1.3.6.1.4.1.89.53.15.1.6

  . 1.3.6.1.4.1.89.53.15.1.7

  . 1.3.6.1.4.1.89.53.15.1.8

  B

• Is it possible for a Cascade application change the Notification Mode to vibrate at normal

  I am interested in creating a timer application that returns my phone in 'Vibrate only' notification 'Normal' after a period of time defined.  I knshow you need to set permissions, but I didn't know anything like that to give permission to do so.  I have a Z10 with 10.2.1 on it.

  Is this possible or not BB 10.2.1 avoid this?   It would be nice to be able to do.

  A snippet of code showing how to set up permissions for this would be useful.

  You can change the Notification Mode since 10.2, here's what you need to do.

  Add this line to the bottom of the file bar - descriptor.xml, under the tab "source":

  access_notify_settings_control
  

  Add this line to your .pro file:

  LIBS += -lbbplatform
  

  Add this to your file:

  #include 
  
  public: Q_INVOKABLE void switchMode();private:
      bb::platform::NotificationGlobalSettings* notificationGlobalSettings;
  

  Add this to your .cpp file:

  void YourClass::switchMode()
  {
      if (notificationGlobalSettings->mode() == bb::platform::NotificationMode::Normal) {
          notificationGlobalSettings->setMode(bb::platform::NotificationMode::Vibrate);
          break;
      } else if (notificationGlobalSettings->mode() == bb::platform::NotificationMode::Vibrate) {
          notificationGlobalSettings->setMode(bb::platform::NotificationMode::Normal);
          break;
      }
  }
  

  Simply call switchMode() function in c ++ or QML to switch between the Normal and the vibrator. Note that this code will do nothing if the mode is set to anything else than Normal or vibrate. If you prefer to scroll through all the available Notification mode, use this function:

  void YourClass::switchMode()
  {
      switch (notificationGlobalSettings->mode()) {
          case bb::platform::NotificationMode::Normal : {
              notificationGlobalSettings->setMode(bb::platform::NotificationMode::PhoneOnly);
              break;
          }
          case bb::platform::NotificationMode::PhoneOnly : {
              notificationGlobalSettings->setMode(bb::platform::NotificationMode::Vibrate);
              break;
          }
          case bb::platform::NotificationMode::Vibrate : {
              notificationGlobalSettings->setMode(bb::platform::NotificationMode::Silent);
              break;
          }
          case bb::platform::NotificationMode::Silent : {
              notificationGlobalSettings->setMode(bb::platform::NotificationMode::AlertsOff);
              break;
          }
          case bb::platform::NotificationMode::AlertsOff : {
              notificationGlobalSettings->setMode(bb::platform::NotificationMode::Normal);
              break;
          }
          default : {
              notificationGlobalSettings->setMode(bb::platform::NotificationMode::Normal);
              break;
          }
      }
  }
  

• Effect of loss of link IOM UCS on CF in Port-channel mode

  Hello

  We recently discovered that when UCS Server Ports are port-channel mode, loss of a member link causes CF traffic disruption in a VMware environment.  Host VMware never sees a path down and his guest enter a time-out period of IO wait.  Once expired the time-out of comments, a SCSI reset restores connectivity of storage.  We responded to several customers and said that this is the expected behavior.  This is of concern to us and how it affects the design decisions.

  Any contribution is appreciated.

  Thank you.

  It is true, that you expect the SCSI timeout, and then the operating system must redo a flogi. Of course, I guess that you have CF multipathing installation and work; Therefore, no disruption to traffic.

  Without port-channel, the vhba on the failing tissue will go down; and the management of multi-channel FC is the only solution.

• Smartphones blackBerry how to change the connection mode for a BlackBerry Internet Service account on my 9700

  Got my first BB is the 9700 and I believe that my company doesn't have not BES, I must connect on my BIS via a computer to set up my work email (Microsoft Exchange Server). After having read about it and try, I get an error message on the Web site of my provider which basically means that I need to change the connection mode for a BlackBerry Internet Service account. I checked the site Web of Blackberry and the instructions do not work for my 9700. Can someone help me please?

  Thank you very much

  Buskroth

  the link provided should have addressed your question, if you "can't get there from here" - I would suggest that you contact your carrier because they need to move your account password enabled allowing connect you via a non - BB browser to set up your BIS email setting...

• Cannot change the default mode in wscript

  In Windows 7, when I try to change the default mode of wscript, I get an error message. When I get home

  CScript //H:CScript

  the command line, I get

  CScript error: cannot change the default script host

  What should I do?

  Open command prompt w / administrative permissions (right click, run as administrator), and then run the command:
  cscript //h:cscript //s //nologo