Similar Questions

• Stand alone driver for the minimal application installer MyRIO

  Dear all,

  I'm trying to deploy a full installation package for a laboratory study, which would include:

  1. exe application file compiled from a VI. This VI connects to the MyRIO via network flow.

  2 labview runtime engine

  3 driver for the USB LAN unit MyRIO.

  First 2 steps succeeded, and the VI communicates with the device via WiFi MyRIO. However, I would like to connect trough USB and need a driver on the host machine. Installation of a complete driver package is certainly an overdose for this occasion.

  Therefore, I'm looking for someone to report to a minimum installation package that would ensure good communication with MyRIO via USB.

  Regarding kind.

  Česlav

  Thanks for the quick response Sam K

  .

  After all, I found the file msi corresponding to the LAN drivers on the DVD myRIO. There is a separate driver for win XP, that does not work on my Win 7 64 machine. The following file actually worked very well "NiRio_USBLAN64.msi" with the associated cab file. Without the rest of the CompactRIO drivers it does not appear as MyRIO, but as a generic USB LAN adapter device. Connections work properly, exactly what I was looking for :-).

  The bad news is that when you create an installer in the construction specifications, the .msi files are not considered as executable files and can not be integrated in a single installation procedure. Students will have to make several more clicks.

  I also noticed that CompactRIO drivers can be integrated into Setup completely, which facilitates the procedure, but adds an another 150 MB to the installer against the 3.5 MB for only the LAN driver.

  Maybe this thread will help someone else.

  Greetings,

  Česlav

• Installation add on LR 5 stand alone?

  Hello

  I want to install the uploader add on stand alone LR5 500px. I do not use creative cloud. So far, I tried the following:

  Install desktop creative cloud application: Installation failed with error 1?

  Install the extensions and hollow Manager app it: failed Installation of the add on because the extensions Manager cannot verify my license?

  No idea how to install the add-in on?

  Thanks for any help

  Daniel

  OK, some files seem to have become corrupt. You can run a cleaning tool to help with this. There is a link to the tool in this article: "Cannot install" error received when installing Adobe Creative Cloud desktop application

• I would like to buy and install a stand-alone version of Lightroom on my iMac. I do not want to join the CC program. The CC is not an option for me. I'm iMac late 2009 user, osx el capitan, installed on a formatted hard drive 1 t, 16 GB of ram with1066 MH

  I would like to buy and install a stand-alone version of Lightroom on my iMac. I do not want to join the CC program. The CC is not an option for me. I'm iMac late 2009 user, osx el capitan, installed on a formatted hard drive 1 t, 16 GB of ram with1066 MHz PC3-8500 DDR3 SDRAM. Everyone uses LR6 on iMac late 2009? anyone has any experience with el capitan and LR6 osx?

  Hi Piotrsta,

  With the last update of Lightroom, most of the problems have been corrected.

  Also, you can read the following article: Lightroom and El Capitan | Mac OS 10.11

  Kind regards

  Tanuj

• Can I install a stand-alone version of Lightroom on my IMac and my MacBook Pro and then use an external hard drive to store all my photos?

  Can I install a stand-alone version of Lightroom on my IMac and my MacBook Pro and then use an external hard drive to store all my photos?

  Yes.  To keep both computers synced, keep a copy of your catalogue on the EHD also.

• Add license VCB to a stand alone ESX server

  Hi all. Please forgive my ignorance on the subject. We have 8 stand-alone ESX3.5 Foundation licenses, but VCB is not currently registered on the hosts. I try to use vRanger connection and VCB to backup my VM that are located on a NAS. In any case my colleague just got the phone with HP and they informed him that we cannot add VCB for stand alone ESX servers, because we do not have a license server. I don't understand what they are talking about and why we would not be able to add the VCB component on our servers. Unfortunately, I do not understand enough Japanese to enter into a debate with HP (Japan) on the subject. Is there a reason that I couldn't apply the licenses that we have on the servers? Could someone with more knowledge on this help please me out. If you need further information do not hesitate to ask.

  See you soon

  Kevin

  .. .well the link here shows he included:

  http://store.VMware.com/servlet/ControllerServlet?Action=displayPage&env=base&locale=en_US&siteid=VMware&ID=ProductDetailsPage&ProductID=83581600

• How to add an array of stand-alone physical layer to the Business Model

  Hello
  
  I have tables from 2 different database sources in my physical layer.
  
  My business model is currently using only the tables of a database. My second database in the physical layer, I don't need a single table and who will be an array of stand alone, to my presentation layer.
  
  1. must you go through my business layer or can it be added directly to the presentation layer. What are the steps?
  2. can I restrict permissions on this table stand alone to the administrator?
  
  Thank you.

  (1) create a view with a single column using sql (select 1 of the double) in the physical layer and attach it to the table using a complex join in the physical layer (1 = 1).
  A movement that set the column as a key in the physical layer and mdb to MDB.

  (2) you can restrict access to the presentation layer of table
  Double-click the table of presentation-> Permission-> here layer, you can restrict access by user or group

  Thank you
  Vino

• Need help of the correct SAS 2.5 upgrade option "HDD for PowerEdge T620

  I want to add the disk to an existing Dell PowerEdge T620 (service tag GTPKDV1) storage. The vehicle currently has 7 300 GB SAS 2.5 "hot, two virtual drives (300 GB RAID1) and RAID5 1116 GB replaceable drives. There are 16 bays.

  Browsing the Dell store for server upgrade parts I am surprised not to see that two form factors for of 2.5 "10K rpm SAS drives. only 300 or 900 GB. Nothing to do with higher speeds or more capacity! And I'm not even sure, one of the search results is really 2.5 "because the Web site product description does not indicate the size at all.

  300 GB of the manufacturer: 15NM6 | Dell reference: 342-2016 (accessories.dell.com/.../productdetail.aspx

  900 GB of the manufacturer: TPMWF | Dell reference: 342-4143 (http://accessories.dell.com/sna/products/Hard_Drives_Storage/productdetail.aspx?c=ca&l=en&s=bsd&cs=cabsdt1&sku=342-4143&mfgpid=225343)

  The 900 GB is described as a hybrid drive. What is a drive hybrid? Isn't SAS, SAS?

  There are several results that seem to be variations on the 300 GB 10 K 2.5 "disk SAS6. They are all the same product? Why the different reference numbers?

  The H710p wouldn't even try to use the 300 to rebuild the 1.8 TB drive failure, as the reader will not be perceived as a Hot Spare for this virtual disk. A 300 GB global Hot Spare would be able to rebuild any 300 GB or more small disc. If the Global Hot Spare is a 1.8 to it should rebuild one of these virtual drives.

• Stand-alone application with LabView 7.0 get error cannot find DAQmx clear task.vi

  I tried to create a stand alone vi with the Build Application or shared Library (dll) in LabVeiw 7.0

  When I put it on another PC to test it I get the error "cannot find DAQmx clear task.vi.

  the other PC also has 7.0 and 8.1 DAQmx Labview.

  I think my problem is in the source tab, where you are supposed to add dynamic vi and support, I have search the forums and database of nor and have not found a solution.

  Hi LabTech09,

  When you run the executable file on the other computer, that's when you get this error?  You have the same exact versions of DAQmx and LabVIEW on both computers?  Is the dialog box allow you to navigate to the clear task.vi DAQmx?  If so, you can find these screws in C:\Program NIUninstaller Instruments\LabVIEW 7.0\vi.lib\DAQmx\configure\task.llb.  The executable runs on the development computer (the machine, it was compiled on)?

• Creation of stand-alone executable file with similar library files without errors of link

  I have an Executive Test that is run on two different test systems. Each stand has another card ARINC429. The old card use 429dll32.lib, while the most recent map use pci429.lib. Test Exec code only loads a single library file (using LoadExternalModule) depending on what the test bench has the card, but since there are many similar functions in both, ICB does not test Exec be built as a stand-alone executable.

  In CVI 5.0.1 I opens the "Create stand-alone executable file" and select "add files to the executable. I check the 429dll32.lib and the pci429.lib to include in the creation of executable, and then click 'OK '. When I click 'OK' to create the executable I have several link errors, one for each function both .lib files have in common.

  Is it possible for each of these .lib files to be included in the compilation without having to create two separate executables?

  eatmontr:

  If you use LoadExternalModule(), you need not include the .lib files in the Executive test project.  Refer to the CVI for LoadExternalModule help.

  Here's the info on the help:

  LoadExternalModule loads an external object module file. You need not list the file in your project or loaded as a module of an instrument.

  The file may be an object (.obj) file, a library file (.lib) or a library (.lib) import DLL.

  Here are a few articles to OR who can help.

  To access the plug-ins with CVI (with sample program) http://zone.ni.com/devzone/cda/epd/p/id/133

  How do I call dll if I have two functions with the same named in two different dll? http://digital.NI.com/public.nsf/allkb/5299ED8D43F3B5FE852563BF0056EBA6

• VI compiles in stand-alone with a menu of the runtime application

  I have a VI I am compiling in a stand-alone application, but unfortunately this error when I try to compile the application:

  Error 1 ganglion invoke in AB_Build.lvclass:Copy_Files.vi-> AB_Application.lvclass:Copy_Files.vi-> AB_EXE.lvclass:Copy_Files.vi-> AB_Build.lvclass:Build.vi-> AB_Application.lvclass:Build.vi-> AB_EXE.lvclass:Build.vi-> AB_Engine_Build.vi-> AB_Build_Invoke.vi-> AB_Build_Invoke.vi.ProxyCaller

  Possible reasons:

  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @. = OR-488: command requires GPIB controller charge controller.

  Method name: Linker: writing Info file

  I'm fairly certain that this error occurs due to the addition of a custom menu DURATION in VI.  This same exact VI generates an application without any problem, if I just change the DURATION back to the default menu.

  I tried to add the file menu of performance at the library of projects, but that did not help anything.

  It's very confusing to me.  I've built applications that uses the custom menus runtime before without any problem and may not know what is different about this situation.  Any help would be appreciated.

  For all those who can find it in the future:

  Fix LabVIEW installation on my computer fixed the problem immediately.  Now I can compile the same program by setting the menu of the runtime on the front panel, as opposed to directing it to an external file programmatically.

• Problem with stand-alone application

  Hello. It's my first time here in NOR. Need for support from the masters. This is the situation.

  Main problem: image display

  When I try to do a stand-alone application, the "image display" vi will not work. I'm missing DLL here? Nothing seems wrong with the vi or the vision. I can make KING in the external window, etc.

  I also tried to make a simple program that displays a white image using the image Board, but there is still no display.

  I can also ask what dll is required to make a labview program stand alone with vision and imaq.

  Hello

  To deploy an application that uses the functions of the Vision Development Module, you need the runtime of the Vision and a license of execution for this on the deployment computer. If you use the NO-IMAQdx driver for use with firewire and GigE cameras, you also have a license for Acquisition of Vision software on desktop deployment.

  If you do not use the functions of the Vision Development Module or driver OR-IMAQdx, all you would need is the driver OR IMAQ. The Image display control began with NOR-IMAQ 2.6, so make sure that you install a version of NOR-IMAQ that supports the control of display Image and LabVIEW 7.0 on desktop deployment. Please refer to this Web page to check the compatibility of the versions of NOR-IMAQ and LabVIEW: http://digital.ni.com/public.nsf/allkb/6B55FF09D1FBD3108625719600650B7C?OpenDocument .

• Is there a stand-alone client to start remote consoles?

  Hello

  currently I am struggling to navigate through all of the GUIs to launch HTTP console remotely on servers I want. I see it's java-based app that downloads automatically when I click to start the remote console.

  But I was wondering if there was a tool that would allow me to directly launch onoly consoles without the need to go to ISU, HTTP etc. ? This would save a lot by clicking on. I know that IBM has a free stand-alone java client which makes life really much easier to start the remote console and switch between the blades. Is there anything like this available for DELL servers?

  Tried running this jnlp but it fails with access denied without even asking for credentials... so I assumed it is only use unique applet?

  Thanks for the tips and suggestions

  I know this is an old thread, but if someone were to happen on it and see the answer previously suggested they would assume that it's impossible, but from iDRAC7 (gen 12 PowerEdge or later), you can connect to the remote console using VNC.

  Document access to remote desktop using VNC on Dell PowerEdge servers from Dell here.

• Hard disk replacement 5 RAID PowerEdge T620

  Hi all

  Here's the situation.  One of my clients has a Dell PowerEdge T620 that raids.  Group 0 is RAID 1 with discs hard 0 and 1.  Group 1 is a RAID 5 with 2-6 drives.  The RAIDs are hardware RAID and software either.  I do CTRL + R to join RAID controller at the start of the server system.

  6 player came with a predictive failure (flash green once, once orange flash, no flash, repeat).  It is not indicating that it is bad in the RAID software.  In the Dell software manage Open, he states that it is a non-critical error.  I called Dell and they sent a disc of the same type, style and size.

  Here's my question: since this is a critical server what is the best way to replace the hard drive and the RAID to rebuild.  Don't want to lose all the data on this since it is an EMR system.

  Yes, I guess that the RAID will rebuild itself, so I have to ask if this is also true, a RAID 5 system will rebuild itself when a hard drive is restarted?

  Thank you
  Kelly W

  Hello

  kwilkegrizzlies

  Since it is a critical server what is the best way to replace the hard drive and the RAID to rebuild.

  • You must ensure that you have a valid backup first tested
  • Run a check consistency before replacing or drive offline
  • Disconnected the disk before replacing
  • Hot the disc if you have a bottom of basket. Turn off and unplug replace it if cable.

  You can use OpenManage Server Administrator for offline consistency checks and initiate.

  Thank you

• Windows 7 on the server Dell PowerEdge T620

  Can I install Windows 7 on a Dell PowerEdge T620 server with these specs?

  Card mother TPM

  Intel Xeon 2.00 GHz E5-2620, cover 15 M, 7.2GT / s QPI, Turbo, 6 c 95W

  Chassis with up to 8, 3.5 "hard drives of type Tower

  1333 MHz RDIMMs 1

  8GB RDIMMS, 1333 MHz, low-voltage, Dual Rank x 4

  Intel Xeon 2.00 GHz E5-2620, cover 15 M, 7.2GT / s QPI, Turbo, 6 c 95W

  600 GB 3.5 inch 15K rpm, 6 GB/s SAS Hot Plug hard drive

  PERC RAID controller integrated H710, Cache 512 MB of NV, full height

  16 x SATA DVD + /-RW Drive (with RAM) for Ms 2008 R2

  Worst case, you can resell, install a server on it, operating system etc and put it in your living room to show off :)  The case of CaseLabs looks cool, but you'll have to do the same kind of work at home get compatible (and inter compatible) parts for it.

  As I said, there is a good chance that everything will be installed and working fine... just to prepare for the unknown, when venturing off the beaten path.  If you have someone knowledgeable who can at least get you headed down a direction where there is a visibility for success, it would be useful... good luck!