PowerSaver shortcuts on the Satellite a series does not work

Similar Questions

• Webcam on the Satellite A200-175 does not work - error code 10

  Hi all

  I bought a Satellite A200-175 yesterday and I am trying to use the webcam, but it does not work. I searched the forum for possible solutions, but so far I have not found anything that solves my situation.
  The laptop came with a preinstalled Vista OS, but the software of the webcam was not preinstalled. So I downloaded the latest Toshiba download page doftware and installed.
  Subsequently, it still does not work and so I changed drivers for generic Microsoft (based on the advice of the forum).

  I tried to reinstall drivers (several times), but that did not help. Device Manager keeps giving me the error code 10 (device cannot be started).

  I'm a bit of idea, so any help would be appreciated!

  Hello Franca

  It's very strange because I installed the recovery image on notebooks P200 and U300 (both with the webcam) and I didn't notice any problem. After the first boot the cam will be recognized as new hardware and installed correctly.

  Have you installed some Messenger like Yahoo or MSN and try to use it with one of them?

• On the Satellite P500 microphone does not work well

  I spent $2,000 to buy this Satellite P500 a month ago and soon found that the microphone does not work well. I used the web camera application to record a video to test, the volume level is very low that you barely hear it and it cracks.

  I called the support center, waited for half an hour and finally had someone to talk to me, I followed his instructions adjusted the level of the microphone to 100 and the boost to 0.
  The cracking sound disappeared, but the level of volume is still too low to hear. What can I do?
  Call again and wait half an hour? His Friday 17:00, they will be upset and I'm already mad!

  Hello

  Have you tried to test mic with Skype or a similar application. Friend of mine has Satellite P500-127 and he use it for Skype communication.
  I can hear it fine and everything works fine.

  Do you still have the factory settings (original operating system preinstalled)?

• Drive DVD/CD of Satellite a series does not work properly

  My computer sometimes starts fast and when it does recognize the DVD/CD player and functioning.
  However when she takes it the start time, it does not recognize that I have a DVD/CD player, when I look in Device Manager to see if
  There is no probs it simply says that the device is functioning properly?

  Does anyone has any ideas at all the

  Would be nice of you if you could give us MORE details; for example what operating system you have, what kind of machine you have and so on.

  It s hard to help someone, when that person said: my CD does not work, then it works then not again. It is not a description of the error.

  PLEASE MORE DETAILS

  THX

• The Satellite A200 display does not work

  Hello
  I own a Satellite A200, since yesterday my screen did not work. I hear vista start in the background but theres nothing on the screen when the system is off.

  Please help me...

  Hello

  Go you through the devices different views?
  Using the FN + F5, you can switch to the external monitor or maybe TV you used this key combination accidentally?

  It would be also advisable to connect another external monitor to the laptop to check if anything should be displayed on the monitor

  If you're not going to see anything on the second monitor, then a default display could be possible.

  The A200 is not very old series of laptop I think the warranty to be valid. Therefore, you can contact the ASP in your country for and verification of the laptop.

  Good luck and greetings mate

• USB ports on the Satellite L30-105 does not work after the downgrade from Vista to XP

  Hello

  Model: Toshiba L30-105 PSL33E-02S02HFR.
  USB ports (2) do not work after the downgrade from vista to Windows xp family. All the drivers downloaded from Toshiba Web site.

  Thanks for any help,

  Camellia,

  Have you installed Win XP all service packs?
  SP2 provides some patches on the USB feature.

  You definitely need to update the Win XP OS

• New shortcut tab (cmd T) and 'enter' does not work

  Hello

  As mentioned above, the new shortcut to the tab (Cmd T) does not work.

  In addition, when you enter, for example, a password, and then hit the key enter, doesn't work, too. (entering a url, then hit enter to work, if...).

  My first guess is that the shortcut cmd T is already in use by another application, it is not, though. I checked this (preferences-> keyboard-> shortcuts).

  The shortcut worked until yesterday after I had updated to el capitan.

  Someone at - it a similar problem and knows how to fix?

  Retina not MBP 13 inch, osx 10.11.1

  Restart your Mac and then try the command-T Safari shortcut keyboard.

  Command + T works fine on Safari / El Capitan v10.11.2 for me.

• The product key on my Satellite Pro P300 does not work

  The product key on my Satellite Pro P300 does not work.
  I entered the key from the sticker on the back of the computer. What I am doing wrong?

  Hello

  Why use this product key?

  Firstly the Toshiba recovery image is already enabled and you don t need this key more activations.

  Second, it's an OEM key and it will not work with other versions of Vista!

  Cheers mate

• The function in my Satellite C660 key does not work

  The function in my Toshiba Satellite C660 key does not work except volume.
  This problem appeared after I changed something in startup and programs uninstall that I can remember pvat and no support of the button appears in my programs startup :(

  Please visit Toshiba on http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp download page and download the latest package added Toshiba economical for your laptop model.

  Remove the preinstalled version, restart your computer and install the latest version.
  After doing this it works again.

• Integrated on my Satellite T130 webcam does not work

  Hi all

  the built-in on my Satellite T130 webcam does not work.

  I use Windows 7 Home Premium and already reinstalled the drivers of webcam 64-bit through this Web site. However, when I click on the webcam application, simply, nothing happens - program doesn't open at all or turn off instantly. Skype is not also acknowledge a cam. In addition, there is no webcam in Device Manager (a not detected USB device however) and no symbol of cam in the Ribbon of Toshiba quicklaunch, which is like the camera is started according to the "manual".

  Someone has an idea what is the problem? Looks like a common problem according to Google, but no suggestions other than to reinstall the drivers. Perhaps another application blocking the camera? Firewall settings?

  I'd appreciate any help, thank you.

  Best regards Florian

  > a USB not detected if

  Maybe it's the webcam from the webcam is connected to the internal USB controller on the motherboard.

  It looks like a webcam driver is not installed correctly.
  Try the webcam driver released for the satellite t230 or other series of satellites.
  Versions are newer

  Also recommend that you check the BIOS settings.
  In some cases, the BIOS contains a webcam option where the webcam can be turned on and off.

• Re: Satellite L300 - camera does not work after upgrade to Win7

  As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.

  There is no exclamation point in the system.

  Satellite L300 (PSLB8E)

  Hello

  What happens when you start the webcam app?
  All programs-> Toshiba-> webcam

  Did you install other 3rd software part as for example the Skype that could access the webcam?

  Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
  Start Skype for example, check the settings in Skype webcam chose correctly.

  It would be really interesting to know if the other software would be able to use the webcam.

  By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
  Then sometimes it would be possible that this software could block the webcam and webcam tool could not work

• Ejection of the Replicator Express - II does not work

  The duplicator button eject does not work. I have laptop series TECRA M. downloaded the driver for duplicator of toshiba website support and reinstalled but of no use. I searched in all the forums, but did not find any thread for this problem.

  If anyone has any idea on this issue, please help. The button eject everything does and do not see an option in Windows 7 to eject the PC I did with IBM lenovo laptop with a docking station.

  Is - this top hat of Toshiba laptop what do you use?
  I want to say I put t knowledge how it works on other laptops but why you think it should work in the same way on laptop, you used before?

  You can remove your Tecra of docking station using gear hand placed on the upper side right?
  What happens after doing this?

  By the way: If you check the specs of this under system requirements port replicator s Win7 are not.

• Satellite A350 - Touchpad does not work, but an external mouse works

  Satellite A350 Touchpad does not work ok (unstable system and left button not loaded).

  I tried to make the driver but nothing. No problem drivers (conf system). I have the driver for the touchpad stroped and with an external mouse everything is working properly.

  What should I do? Don't you think it's hard or soft the problem. * The touchpad is NEVER worked.*

  Thank you, and sorry for my bad English. :-(

  Hello!

  The touchpad does appear in Device Manager or you have here yellow exclamation points?

  Like Akuma says you can enable or disable the touchpad with FN + F9 key combination.
  Did you check that?

  In the worst cases, you must go to an ASP. It seems to be a hardware malfunction, and this must be checked by a technician of the laptop. Here, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Microsoft Security Essentials - the planned-out scan does not work.

  In addition to the question about the scheduled scan output after upgrade to Windows 7 to McAfee.Microsoft Security Essentials series instead of McAfee. The scan-out plan does not work.

  Support McAfee tried to straighten my computer of conversation I understood the problem of the update disc. I want to ask a question to the update command:? many problems were very pushed us all after your update. How now to get out of this dung under the name Toshiba upgrades?

  Hey Buddy,

  To be honest I don t know what you re talking about exactly. What has to do with Microsoft Security Essentials McAfee?

  As far as I know it s recommended using a security program only. You must use a Microsoft or McAfee, but not both!

• Re: Satellite L500 - Wifi does not work after Windows Update

  The wireless on my Satellite L500 worked perfectly before you update windows. However, after the updat when you try to connect to a wireless connection, it says that "no connection is available.

  I then clicked on fix to try to find a solution. Then the message "the diagnostic policy service does not work. Using Ctrl + Alt + Delete I went on services and attempted to start the DPS manually, but the message "Diagnstic political service on Local computer started and stopped. Some services stop automatically if they are not in use by other services or programs. »

  This message puzzled me enough as it is said that the Wifi is infact on however in a attempt to FN + F8 F8 option does not appear. Any help would be greatly appreciated.

  Hello

  For Satellite L500, there are already some threads here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=186764
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=178629
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=188577

  Additionally, make sure that the DHCP and DNS services are running. Type of startup is set on "Automatic" and try to restart both services.