PowerShell creates an event log?

Similar Questions

• Backup on an external hard drive, the error code 0 x 81000019 a snapshot could not be created. Pls chk "vss" and "spp" application event logs.

  A snapshot could not be created. Please check the spp and 'vss' ' applications for more information event logs.

  Details: Insufficient storage available to create the shadow copy storage file or other shadow copy data. Error code 0 x 81000019.

  The size of the external drive is free to Go 465,65 Go 465,75. Also "size of the backups is not available" is displayed under the size of the disk in GB. The size of the backup copy is 57 GB.

  Event logs see the backup error event ID 521

  GENRAL:
  Save the operation which started at 2010-03-11 T 13: 41:53 failed because the service operation volume shadow copy to create a shadow copy of the volume during backup failed with the error code 2155348249.

  Details:
  + System
  -event data
  backup time 2010-03 - 11 t 13: 41:53.466000000Z
  Error code 2155348249
  Error Mssg % 2155348249

  Hi Gilles Pelletier,.

  1. check the shadow copy Volume service in the services window. Use the following steps to check:

  i. click on start and type services.msc in the search box

  II. the search for the shadow copy Volume service

  Please let us know the status and startup type. Make sure that the startup type is automatic

  Steps to set the auto services

  i. search for the service

  II. right-click on the service

  III. If the service is stopped and then starts the service

  IV. Select Properties

  v. and in startup type, select automatic

  2 disable the firewall / anti-virus temporarily installed on your computer and then check if the problem still persists. If the problem is resolved, you will need to uninstall the software and reinstall it back or change the settings and check.

  3. even check a drive for errors: http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors

  Check this link which has the similar problem: http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/9b18bc73-26e5-4b28-819f-11628ebbf5e2

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to create a rule of action to subtract from the Ips event log manager console express?

  How to create a rule of action to subtract from the Ips event log manager express console?, some unknown has a guide?

  Thank you.

  Sent by Cisco Support technique iPad App

  Hello

  http://www.Cisco.com/en/us/products/sw/secursw/ps2113/products_tech_note09186a0080bc7910.shtml

  HTH

  Luis Silva

  "If you need IDP (planning, design, implementation) assistance do not hesitate to contact us.

  http://www.Cisco.com/Web/partners/tools/pdihd.html

• A snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information

  Original title: a snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information. Details: shadow enough storage to create the copy storage file or other shadow copy data. Error code: 0 x 81000019

  I tried to back up my files using an external hard drive (which I have done before with Windows 7 64-bit), but recently I get the same error code. I have re-formatted external hard drive, run diagnostics on it, restarted the computer, etc and nothing seems to work. I also tried both options posted in another forum with the same error and too, they were not successful (external is already NTFS and now that it has been re-formatted is completely empty). Windows has more suggests? I hope not to have to use drag and drop my files whenever I want to save my computer.

  Thanks for the help!

  Read this article because I believe that the amount of free space in the 100 MB partition is too small. Article is a different error code, but the technique to increase the size of the 100 MB partition is the same.

  Note: Backup of your hard drive as described in the article.

  How to fix error code: 0 x 81000033
  http://www.PAGESTART.com/win7br0x8100003301.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• The event log does not start error 31: a device attached to the system is not functioning

  I can't get the service to start on my winxp sp3 pc event log. I have tried everything I know:

  • Running sfc/scannow
  • Reset permissions
  • Search for malware and viruses
  • Rebuild the WMI
  • Create a new account
  Nothing seems to work, I think that this is related to an error in hardware/device, but I see no problem in Device Manager. Can someone point me in the right direction to get this resolved? I don't really want to have to format or restore my PC...
  Thank you.

  * EDIT * well it seems to have fixed myself, I used regedit and navigate to the key:

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\EventLog
  
  
  There, I found some records, I deleted the folder "Powershell" and the "Internet Explorer" folder, and the event log service, and then began. I had uninstalled IE and Powershell but these records were still there so I thought I would like to remove to see if he has made all the difference.
  Thanks for your time!
  -Antoni

• Vista event log no longer works

  I recently discovered that I can no longer start Windows event log service.  I believe that this began after the last Windows Update has been installed.

  When you attempt to start the service I get the following error: "error 4201: the instance name passed was not recognized as valid by a WMI data provider."  The services that depend of the event viewer (Event Collector and Task Scheduler) are started, but of course they also do not work.  I tried all the suggestions to solve this problem that are listed in the Technet Forum without success.

  While other Windows Vista technical forums, I discovered there are a large NUMBER of users who also are exeriencing this dilemma.  Some are able to fix problems while others (including me) are not.

  Can anyone offer additional help to fix this problem?

  If Toshiba did not provide your system with backup of your data and/or the system, you will have to make do with what you have. If there is a way for you to save a copy of the exported user settings and data that you can create with Windows Easy Transfer, you can use it to restore all after you have made a "restore to the default settings of the factor" from the recovery disc. This would exclude the software installed after that.

  There are also lucky when you run recovery disks which would offer you a "repair" that would be worth a try.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• VB6 DLL is not log messages in the Windows Server 2003 event log when it is called from an ASP page

  Hi all

  I have an ASP web application, I will create a "VBModule1" (VB6 Dll) instance of an ASP page and inside this method of "VBModule1" I create an instance of another VB6 Dll 'VBLogger', who calls App.LogEvent () to write messages to the event log.

  I tested the Web application on the develepoment (XP) machine and everything worked fine but when the user runs the Web application on the Production Server (windows server 2003) events are not saved.

  Friend missing the security settings of my ASP web app that needs to be configured on Windows Server 2003 for VB6 DLLs logging events?

  Please think as soon as POSSIBLE.

  IIS on Windows server 20003 version: 6.0

  Thank you.

  Hello

  The question you have posted is related to Windows Server 2003 would be better suited to the Windows Server community.

  Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Whenever I boot Windows XP Professional I get the message: error 7026 system event log

  Original title: 7026 event log system error

  Get an error in the error 7026 system event log the following boot-stat or system-stat driver could not load DCDisk.  I get this log entry each I boot XP Pro.  It doesn't seem to be the cause of failure, other than the log entry.  The only app that has a dcdisk.exe I can find is Farstone I installed on the system

  Uninstall and reinstall the program that you have installed that has created the entry

  http://consolecopyworld.com/DC/dc_utils.shtml

  Alternatively, you can remove the redundant entry using Autoruns.

  To identify what loads when you start using Autoruns (freeware from Microsoft).

  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.

  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• Need help with 6 33 sidebyside event log error questions

  I did a complete reinstall of Windows Vista.  The event log showed mistakes aside nearby.   This is one of the six - sxstrace.exe used for the information:

  Launch the activation context generation.
  Input parameter:
  Flags = 0
  ProcessorArchitecture = AMD64
  CultureFallBacks = en-US; en
  ManifestPath = C:\Windows\Microsoft.NET\Framework64\v2.0.50727\Shfusion.dll
  AssemblyDirectory = C:\Windows\Microsoft.NET\Framework64\v2.0.50727\
  Application configuration file =
  -----------------
  INFO: Parsing file manifest C:\Windows\Microsoft.NET\Framework64\v2.0.50727\Shfusion.dll.
  INFO: Manifest definition identity is shfusion, processorArchitecture = "X 86", publicKeyToken = "000000000000000", type = "win32", version = "1.0.0.0".
  INFO: Reference: Microsoft.VC80.CRT, processorArchitecture is "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type is "win32", version = "8.0.50608.0"
  INFO: Resolving reference Microsoft.VC80.CRT, processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type is "win32", version = "8.0.50608.0".
  INFO: Resolving reference for ProcessorArchitecture amd64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\amd64_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_09bcb209fad07c27.manifest
  NEWS: Policy redirected assembly version Editor.
  INFO: The Post policy assembly identity it is Microsoft.VC80.CRT, processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4016".
  INFO: Start the detection of assembly.
  NEWS: Try to detect manifest to C:\Windows\WinSxS\manifests\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_88dc01492fb256de.manifest.
  INFO: Manifest found at C:\Windows\WinSxS\manifests\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_88dc01492fb256de.manifest.
  INFO: End detection of assembly.
  INFO: Resolving reference Microsoft.VC80.CRT.mui, language = "*" processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type is "win32", version = "8.0.50727.4016".
  INFO: Resolving reference for ProcessorArchitecture amd64.
  INFO: Resolving reference for the en-US culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_64\Microsoft.VC80.CRT.mui\8.0.50727.4016_en-US_1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.mui.DLL.
  INFO: Found no manifesto for the en-US culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_64\Microsoft.VC80.CRT.mui\8.0.50727.4016_en_1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.mui.DLL.
  INFO: Did not manifest for culture.
  INFO: End detection of assembly.
  INFO: Parsing file manifest C:\Windows\WinSxS\manifests\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_88dc01492fb256de.manifest.
  INFO: Manifest definition identity is Microsoft.VC80.CRT, processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4016".
  INFO: Activation context Creation succeeded.
  End activation context generation.

  The installation of windows vista has been very successful... Thank you!  I did a factory restore... had some conflicts and massive updates to do.  Problem was trying to do updates, especially for pilots, before the accidents that happen.  I managed to do it.  The only questions I could solve just not have been SidebySides mistakes.

  Thanks to YOUR INSTRUCTIONS FANTASTIC all sidebyside errors are now missing from event viewer. :)

  In case you might be interested, here's the historical data for net framework cleanup tool:
  History of changes
  -------------------

  December 3, 2007 - created the history file; any changes made before the creation
  This file is followed.

  December 4, 2007 - additions of extra cleaning for all versions of the .NET
  Framework on Tablet PC / Media Center, all versions of the
  .NET framework on Windows Server 2003, and all versions of the
  .NET framework on Windows Vista / Windows Server 2008.

  January 23, 2008 - addition of registry values to remove .NET Framework 1.0
  and 1.1 patches that were previously left out.

  29 January 2008 - addition of the product codes for .NET Framework 2.0 SP1, 3.0 SP1, and 3.5
  RTM versions.  Added a few 3.0 and 3.5 directories that have been
  already be left on the system.

  February 4, 2008 - added the cleanup who were initially registered on jobs
  December 4, 2007, but was inadvertently deleted.

  March 5, 2008 - fixed problem of deletion of registry which may affect 64-bit operating systems.

  March 6, 2008 - fixed an error of advapi32.dll on some caused by the previous operating systems
  Difficulty.

  April 30, 2008 - codes added product .NET Framework 3.0 beta to the list of
  items to remove during cleanup of .NET Framework 3.0.

  June 5, 2008 - corrected a problem with recovery of the Windows directory
  systems with active Terminal Server Services.

  June 6, 2008 - adding a /u switch to allow to run in unattended mode (which
  Displays the progress page but no other Interface and will require
  no user intervention).

  June 9, 2008 - disable the readme file and log file buttons if the tool is underway
  run in unattended mode.

  July 22, 2008 - added logging for detection of version of .NET Framework.  Update
  the tool to set the title of the window in cleanup.ini.

  August 14, 2008 - added support for the .NET Framework 2.0 SP2, .NET Framework
  3.0 SP2 and .NET Framework 3.5 SP1.

  November 26, 2008 - fixed a logic problem that caused the cleaning tool for not
  Delete the values to register 32-bit on Windows 64-bit versions.

  December 22, 2008 - added the version string is added to the log file.

  July 24, 2009 - added logic to properly clean the .NET Framework
  Windows 7.
  Added detection and logging for the .NET Framework 4.
  Avoid cleaning of mscoree.dll on Vista and higher.

  October 27, 2009 - fixed problem of withdrawal associated with VC ++ runtime files on Win9x
  and Windows 2000.

  October 29, 2009 - fixed problem of withdrawal associated with runtime files in VC ++ in the
  %WINDIR%\WinSxS directory on some operating systems.

  November 30, 2009 - fixed some problems of deletion of registry values that control which
  products appear in Add/Remove programs.

  December 9, 2009 - added logic to treat some types of errors and warnings if the tool
  don't report breaking in some specific scenarios.  Added a few
  new files and to remove .NET Framework registry keys
  steps of cleaning 3.0 and 3.5.

  March 17, 2010 - force the process exit code to get spread
  for the self-extracting installation package.

  April 29, 2010 - added support to clean the .NET Framework 4.

  November 16, 2010 - added logic to clean the cache of .NET Framework 4 police service
  record.

  December 31, 2010 - add a logic of protection against infinite loops when the withdrawal of
  registry keys.

  January 17, 2011 - fixed a bug that prevented the .NET Framework 4 available
  as an option of cleaning on Windows Server 2003 (x 86).

  August 16, 2011 - fixed a bug that prevented mscoree.dll come off, on some
  x 64 versions of Windows.

  19 October 2011 - add a command line switch to allow users to force cleanup
  a version of the .NET Framework even if BONE conditions normally
  could stop him.  It is a switch intentionally undocumented
  and should be used only in rare cases where the user includes
  the impact.

  Thank you once again for a happy Vista user!

• Event log issues...

  So im going through my event log to try to understand a blue screen I got recently, and I had a few questions about things I stumbled on in the case log...

  The first is what is IPSec and the IKE and AuthIP entered services modules strategy service agent?

  and on the other hand...

  "Security," it lists these "Audit success".

  In detail, it lists the user as "N/A"? Should I be worried?

  Hello

  Strategy IPSec IKE and AuthIP are all connected and used for internet security and computer security peer and authentication.
  The IKEEXT service hosts the Internet Key Exchange (IKE) and Authenticated Internet Protocol () AuthIP modules overlay. These input modules are used for authentication and key exchange in Internet Protocol security (IPsec). Stopping or disabling the IKEEXT service will disable IKE and AuthIP key with peer computers Exchange. IPsec is typically configured to use IKE and AuthIP; Therefore, stopping or disabling the IKEEXT service might cause IPsec to fail and compromise the security of the system. It is strongly recommended that you have the IKEEXT service operation.
  Internet Protocol security (IPsec) supports to the peer network level authentication, data origin authentication, data integrity, confidentiality (encryption) data and anti-replay protection.  This service apply IPsec policies created through the IP Security Policies snap-in or the command line tool "netsh ipsec '.  If you stop this service, you may experience network connectivity issues if your policy requires that connections use IPsec.  In addition, remote management of the firewall Windows is not available when the service is stopped.
  These two paragraphs were taken from descriptions of services of each of them.
  The system of audits to ensure that they work very well.
  You have run scans with your anti-virus or MSE?
  I hope this helps.
  Jim

• System Restore error (0 x 81000202) event log

  I m having problems with my entire system so I'm trying to restore but I have this error.  I have no sound my icons have changed all my security features are disabled and will not not turn on.

  There is much info on this option if you goto http://support.microsoft.com/.  Put in (0 x 81000202) event log system restore error in the search box.  Make sure you spell not restore correctly.  I copied and pasted your title in the search box, and the only thing that came was your article.  Then I noticed the fault of strike.

  For the most part, it is to create a restore point and turn it on.  If you do not have restore points then all of this information will not help your current problem.   What a "Factory Reload" or you have any records to reload it?

  When you say does not illuminate, you hear the security features?  In addition, enter Windows in safe mode to try your restore: which is to hit the "F8" key until Windows starts to load.

• Error message: problem loading parameters and check the event log or ask the administrator

  My wallpaper, the desktop icons and most of my documents are gone.

  I have Vista Home Premium and a couple of days and I connected my desktop background was changed. Several desktop icons are missing, and a message came up saying there was a problem loading my settings and check the event log, or ask the administrator (me) for more details. All my "Favorites" were missing in the sidebar and my documents and recorded images folders are empty. Microsoft customer service tells me there is an error in my code for the identification of product (from the Windows Activation in systems and Maintenance) so I can't help out.

  Any thoughts? Thank you!

  Hello, G25

  It is likely that your user profile is damaged. I would advise to create a new user account and test if you get any errors. If everything works as expected under the new user account, you can start to recover your account profile by following the steps on the following link: difficulty of a user profile is corrupted

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Gets lots of AUTHORITY NT and logon id 0x3e7 and 0x3e5 in my event log

  Original title: super sneaky hacker in my stuff

  I get a lot of AUTHORITY NT and logon id 0x3e7 and 0x3e5 in my event logs.

  over a period of three days, my log security lists 119949 news events, logons specific 124, 383 uses special privileges, 1589 changes registry, 1062 process terminated, and descended from the 8351 scheduled tasks.

  in detail:

  account NT AUTHORITY - assigned special privileges 0x3e7 login id

  security, backup, restore, TakeOwnership, Debug, SystemEnvironment, LoadDriver, Impersonate, AssignPrimaryToken and verification of privileges

  then my computer, with the id of 0x3e7 connection accesses the Server Security Account Manager and obtained the rights to read and write settings of password, read and write other settings, create user, create local groups, get memberships to local groups, list, the lookup id accounts and administer the server.

  and then registers a reliable logon process trust to present requests for logon, load a package notification to be notified of any change of account or password, load an authentication package to be used to authenticate logon attempts, gets the attributes of writing to my antivirus executable files and shields and changed the time system.

  My COMPUTER service says this is normal, but I do not.

  How can I he kill?

  Hello

  Your Department. IT's just that it's normal.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Kernel Event Tracing/Event Log/error - log of the homegroup could not start.

  I hope that this is the appropriate place to put this.  I get this error in my event logs whenever I have to restart my computer.  Specifically, Journal of the residential group was able to start, and in the event logs, it appears as "error events-kernel trace log.  There is nothing wrong with my homegroup Similarly if, as I can see all systems located throughout my house and everyone have access to another.  Errors in my logs have always bothered me :), and I would be very grateful if someone could help me with this.  Thank you.

  Moreover, this error occurs on several computers in the homegroup, so it is not limited to one machine having difficulty.  This error however not has an impact (as far as I can tell in any case) on the performance of my system.

  OK, I'm just to add a little here to mention that work, a round/fix or whatever you want to call it to my original problem.  As I mentioned in the previous post, the systems are not displays the error for several days now.  I think it's because I have restructured the homegroup and ensured that I created the homegroup with my office that stays ON all the time.  So, in other words, I think that the problem comes from the fact that when I created my new laptop wifes, I initially created the homegroup on her computer she puts to sleep all the time when she does not use it.  Other systems, which are mine, continued to generate one error on the log of the homegroup, when his machine was in mode 'sleep'.  Since I restructured the homegroup to ensure that my office is the system that started the homegroup (and remains on nearly 24 hours a day), I didn't have the original error.  If anyone knows this same type of problem, then if I were you, I would at least look into resolve the same way I did.  I'm thinking my problem SOLVED.  I don't know how to mark this topic as a response, so I'll just stay here.

• How to write to the system event log

  Windows 7 Home Premium 64-bit Service Pack 1

  I run a daily work to create an image of my drive system hard. Repeatedly the work began and, due to a material error, be abandoned. In some cases (mostly), this will result in the image of yesterday being destroyed, leaving me with no viable image in case I need to restore. Although the reader is old enough (3 years), I'm not want to replace it, because I know no other activity that has had a problem with it and diagnoses reported no problem.

  So I want to execute a batch file or a script before the regular daily system backup operation. The script would go to a SMART short self-test, and if no errors are reported, would signal the backup task to run. Conversely, if the self-test report any error, the script don't trigger not the backup task to run. I think I will need to write an entry in a kind of system event log, which would be defined in the trigger condition in the entrance to the Windows Task Scheduler for the backup task. If anyone can help with the details of how to write an entry to a log of system events?

  Or, perhaps, there is better way to achieve what I want to do?

  I guess that there is not a very high probability that the script will always truly detect a problem and prevent the last image of the destruction. But I tell myself that it is worth the effort.

  TIA

  Assuming that smartctl generates an errorlevel nonzero in case it failed, the following script will work, as long as Smartctl is run under the same account as Casper.

  I also made your script more transparent control setting. The if/then/else/if/then embedded instructions are perfect for computers, but are often misconstructed by the human mind. I'm a big believer in the KISS principle.

  OFF @echo
  FOR %%d Ko (% Date %) Today SET = %% A

  SET now = time %
  echo =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.
  ECHO% now %%d now %%d %2
  echo"=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.
  Si (« %3 « == » »
  echo of the provided insufficient parameters
  output/b 1
  )

  IF/i %1 is goto short Action
  IF/i %1 is goto long Action
  ECHO 1 Parm [%1] is INVALID
  output/b 1

  : Action
  smartctl t %1 %2
  the echo of SECONDS to WAIT for selftest %3
  choice/n/t %3/d N
  smartctl-l selftest %2%

  Set Flag="%temp%\Smartctl.log".
  If exist % del % % flag flag
  If %ERRORLEVEL% is 0 echo. > Flag %

  For the handshake to work, you must place the CASPER command inside a file of commands as follows:

  off @echo

  If exist c:\Casper\Casper.exe '% temp%\Smartctl.log '.