PowerShell - returns the name of the model of a virtual computer running

Similar Questions

• Cannot modify memory and CPU of the parameters on a virtual computer running - vSphere 4

  After a new installation of vSphere 4, I created several virtual machines and P2V had a couple as well.  DRS and HA was set up, and everything worked well.  If I understand correctly, I should be able to change the settings of RAM and the processor to a virtual computer running, but they are greyed out as with previous versions.  I can change them if the virtual machine is shut down.  No idea why this?

  Thank you!

  1 VM should be version 7 of material.

  2. you must set the "Allow memory hot add" powered off mode.

  Only after this, you can add memory to the virtual machine performance. Also, don't forget that Windows 2003 and 2008, Enterprise Edition and Datacenter Edition support this.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• Get the data from a virtual computer store

  I'm looking to get the data from a virtual computer store, but format to be used with vmrun.  My current vmrun statement is:

  vmrun t CR h < IPAddress > https://: 443/SDK u & lt; username & gt; Pei & lt; password & gt; runProgramInGuest "[& lt;. datastorename & gt;] & lt; datastorefolder & gt; / & lt; virtualmachinename & gt;. VMX' c:\myscript.bat

  The idea is to replace & lt; datastorename & gt; given with the name of the LUN that is running on a virtual machine.  In this case, I'm running my statement vmrun from inside a script PowerCLI.  I can use a variables powerCLI, if the vmrun instruction can take and use all escape sequences are needed to adapt the format vmrun to this argument.

  That is right.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Essentials of security will run a scheduled scan of the entire system on a computer running Win. XP hibernation

  Essentials of security will run a scheduled scan of the entire system on a computer running windows XP Hibernate

  No scanning is performed in hibernation, standby, sleep, or else that the system is powered off.  You must plan the scan for a time when the PC is running.  MIDI works fine for me.

• Determine the maximum use of the processor for a virtual computer in the custom user interface

  I want to determine the maximum use of the processor for a virtual computer in the custom user interface.  How can I do this?

  If I use a supermetric, there is no kind of attribute under CPU called "maximum use.

  Certainly, you get points for a long question! Although to be fair, it's probably my fault to feed you so much information to digest at once.

  1. I would say you can do two ways visually. Use the operations > detail view for 'normal ranges' use the upper limit of the normal range as your typical max. You want an absolute peak, add the metric of a graph or observe that highlight high and low watermarks.

  2. There are a lot of ways to display data, but if you want to display a single metric over a period of time, we could use the following widgets [on top of my head]:

  Top - N analysis

  Weather map

  Analysis of distribution of data

  Among these, I think of your desire for a "peak". Who you want real value, which eliminates the weather map. Then, I think that the concept of a 'Summit' and what is the best thing, I think that the 95th percentile... then I came with the widget of data distribution. The decision is ultimately yours given your particular use case.

  3. you can have it apply to several virtual machines - it's just a widget capable of being an independent provider or receiving widget (metrics, DO NOT choose to select resources). Each resource/metric will add to the widget and you can remove them if you like after it is added. You can certainly all the time you visit... It is date and time standard options you have in all the other widgets chart. With the widget data distribution, you want as much time as possible to get an accurate histogram of the cycles of workload.

  4. This is similar to the question above. You can certainly add parameters of individual resource or a DM that summarizes or AVG groups of resources. And as above, the delay is configurable, along with the other graph widgets.

  5. it's part of Q4 - you can sumN or avgN up to any number of resources with a SM, then discovers that SM in the widget of data distribution. When I said container, I mean an application, group resource pool... all that acts as a container parent within the vCOps.

  6. that's correct, SMs calc using data collected last points... aka single period of time. When you are referring to the longest period, I gave you a few examples of the attributes that are composed of several periods of time which are calculated and created by the adapter for VMware vCenter behvaior. In this case, you have the GVA 15 min CPU 1.5; These specific simple mobile GVA can be specific OR a copy using SMs. Next, you will have the chance is to find a way to distribute what you need through a widget [at that time].

  7. the distribution of data is not for export, it is for Visual functions. If you want the data in CSV, just use a typical chart of metrics and export to a csv and calc your own pics, avg, 95th, whatever.

  8. This is a bit of a mix of all your questions, put in place.

  You are right, if you added those 3 VMs, then calc was the 95th of the AVG. Like Q7, you would not export the data of the distribution of data because the raw data points are not - you do not pass the metric to a metric graphics standard and export via csv.

  Take advantage of...

• Is there an API that returns the model number or any other identifier for a module installed, I can use to identify the characteristics of this module?

  For example, I'll call you

  DaqSystem.Local.GetPhysicalChannels (PhysicalChannelTypes.AI, PhysicalChannelAccess.External)

  For a list of connected devices.  The data in the table back looks like this:

  cDAQ1Mod4/ai0 (etc.)

  It tells me that I have a CompactDAQ chassis, which is good, and an analog module in the slot Module4.  What I need to know is not just that there is an analog module in the slot to #4, but also of its ability (voltage, temperature, voltage, etc.) so that I can use the correct DAQmx task for this type of module.  All this has to be discovered during execution.

  Otherwise, I'll have to provide a configuration utility when the user program needs to determine which module is plugged that slot - and will it change by moving it to another location, you must enter these details again.  I want to avoid this by making the material more discoverable as possible.

  I can remember an API - and that is my hope.

  * beep *.

  Hello

  I could understand the syntax for you. It's here.

  Device blah = DaqSystem.Local.LoadDevice ("cDAQ1");
  foreach (String dev in bla. ChassisModuleDeviceNames)
  {
  Label1. Text += "\n" + DaqSystem.Local.LoadDevice (dev). ProductType;
  }

  This displays the model number of all modules of the cDAQ in the chassi. I hope this helps.

  Kind regards

  Perry S.

• Retrieve the vm to a virtual computer model Specs

  I try to get the specifications of all the virtual machines within a model of vApp and wonder if someone has already done this?

  On itialial thought, my instinct is to collect the vm Morefs of in the model and then query the object directly via vCenter info, bypassing vCloud Director completely. But there must be a medium eisier.

  You need to get the host name vCenter for being given (by extension of the admin)

  He is former quick & dirty code so this can certainly be improved.

  var vdc = vApp.parent;var org = vdc.parent;var host = org.parent;
  
  var providerVdcReference = vdc.toAdminObject().providerVdcReference;var providerVdc = host.getEntityByReference(VclEntityType.providerVdc ,providerVdcReference);var adminExtProviderVdc = providerVdc.toAdminExtensionObject();
  
  //Get vCenter Resource pool var vimServerUrl = adminExtProviderVdc.getVimServer().url;
  
  var vimServerHostName = vimServerUrl.substring(vimServerUrl.indexOf("://") + 3, vimServerUrl.lastIndexOf(":")); 
  

  and then use something like this:

  Server.findForType ("VC:VirtualMachine", vimServerHostName + "/" + vmMoRef);

  You can also get the ID of the object in vCD and use vCenter query service to retrieve the object by name, but I do not have a code example for him.

  Christophe.

• How doI to return the mode screen landscape? I run vistahome Edition

  Please help my screen went to portrait and I need help to replace for hhhhhhhhhhhhhhhelp of the landscape

  Press Ctrl & Alt keys and use the arrows to rotate back.
   
  According to the graphics card on your computer, these can be alternatives.
   
  Right click on the desktop | Graphics options | Rotation.
   
  Right click on the desktop | Screen resolution | Orientation.

• How would recreate the pagefile to a Windows 2008 virtual computer running on a host ESX 3i?

  As the subject says, I'm looking for a way to do this.  I inherited the environment of another group and it is very small, but it performs ESX 3i on the two hosts and Vcenter version 2.5 (Infrastructure) is a bit old.  5 of 6 VM are operational, however, the 6th when turned on will not get 40% full, but then it will fail to stating that is not a swap file.  Now, normally it is not a swap file, because they are created or deleted dynamically whenever a virtual computer is powered on one of the hosts.  It's quite strange.

  In the new versions / environments, there seem to be ways to recreate exchange capacity easily, but which doesn't seem to be the case here.  I don't think it's a process lock as the two hosts have restarted to clear HA agent / editions of the resource.  My guess is this has happened has been one of the hosts could not reproduce any more process for some reason any and when the VM problem has been powered down to try to erase some, the problem occurred.  Either that, or there are unreadable sectors in the data store, and perforated in this swap file black...

  I was wondering if anyone had any ideas on how to solve the problem.  Any input would be welcome.

  Thank you!

  All,

  Thanks for the suggestions, but I solved the problem.  What needed to be done was to remove the virtual machine of the inventory and then re-create it as a new virtual machine under the cluster of the same name, same settings and have it use its 2 existing virtual disks.  For some stupid reason, once this is done, he managed to turn on normally and now runs without problem.

  I'm not necessarily happy that this solution because it does not really help understand me what underlying the problem actually was, but I guess I can live with that.  The reason why I have not tried it earlier, is that I was afraid the vmdk would be replaced and I wanted to keep the existing information.  However, someone I work with was certain that they had done before, and that she maintained the pre-existing data, even in this older version, so I finally tried.

  in any case, thanks for the support, and if someone can glean some root causes of the problem based on the solution I have just given, that would be helpful.

• Create the installation of XP virtual computer which is the dual boot with Win7

  Hiya

  What is the best way to achieve this please - I can't find a definitive answer anywhere.

  I give myself a choice at startup if using Win7 or XP (default) - I'm afraid I don't remember who was loaded first.

  Any OS is chosen ends up as the C drive.

  I am running XP now and the boot.ini on the C drive only made reference to a BONE, so consider Win7 installation deals with startup ()? :

  timeout = 30

  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS

  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = OPTIN/fastdetect

  I tried just to run XP Converter to create a virtual computer from the installation of XP - it creates the virtual machine, but fails on the Reconfiguration with "cannot find the volume of the system.

  What I have to change something something on the partition in the virtual machine?

  See you soon

  Craig

  Already go you as far as "Please activate now?"

  Congratulations - then fine.

  Expect this reactivation, except if you use volume licenses

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• How to find out really currently used physical memory and swap space of hard disk to the virtual computer running?

  Suppose that I'm leaving WinXP hostOS a guestOS. Then a part of this guestOS remain in physical memory and another part is deployed on hard drive in the swap file resp swap partition.

  First question: the complete *.vmdk loaded into memory/swap space or only the part that is currently required?

  Perhaps only a *.vmdk 800 MB / 3GB is really responsible. But these 800 MB could be extended to 2 GB, because the content of these 800 MB is not compressed during load or guestOS drivers allocate additional memory.

  *. VMDK size seems so NO indicator for the actual amount of used memory / swap.

  How will I know how much physical (a) memory and (b) the hard disk swap space EXACTLY is currently occupied by a certain virtual machine running?

  Matt

  mattad wrote:

  First question: the complete *.vmdk loaded into memory/swap space or only the part that is currently required?

  The vmdk is not loaded into memory, because it is the drive of the virtual machine.

  *. VMDK size seems so NO indicator for the actual amount of used memory / swap.

  Yes, of course not. The memory used by the client is not related to the size of hard but the RAM assigned in the options of hardware reviews.

  How will I know how much physical (a) memory and (b) the hard disk swap space EXACTLY is currently occupied by a certain virtual machine running?

  Open the Task Manager and find a task vmware - vmx.exe or vmware-vmx - debug.exe.

  The swap file should be used if you have chosen to allow that VMware Workstation is authorized to Exchange. The file where swaps to door expansion .vmem Workstation. Search folder of comments.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Is it possible to change the version of a virtual computer hardware?

  Is it possible to change the version of a 7 to 4 virtual computer hardware?

  I tried following the steps that worked for me...

  1. uninstall VM tools.

  2. unregister the virtual machine to the host/vc

  3. edit the VMX and redefine the hardware version on 4. (Do not forget... VMX file Edition is not a supported option).

  4 register the virtual machine to the host/VC

  Again, I would even using converter to downgrade the HW version.

  Thank you

  Ramesh. Giacalone,

  VCP 3 & 4, MCTS(Hyper-V).

  Please give points, so useful

• network to access the problem on a virtual computer

  Hello

  I have a server with esxi 4, and I created a new virtual machine. My problem is that I don't know how to configure the ethernet card in my VM.

  The server has a single adapter ethernet, with a public IP address. The network configuration is default of esxi: a physical card connected to a virtual switch. My problem is that I don't know what IP should I give the machine virtual eth0, and how I can tell that this public IP is connected to my virtual computer. Here is my network configuration:

  

  If anyone can help me, I realize that I'm very bad when it comes to networking

  Thank you

  It cannot be the same IP address as the host. Try one upwards or downwards to the IP address of the host. So that nothing else on the network has the same IP address. Make sure you have the right subnet mask and default gateway (the IP address of your router)

• Access the cluster from a virtual computer name

  Is it possible to create a property that accesses on behalf of cluster a virtual machine is running, like this:

  Get - vm | Select the name,

  @{n = "cluster"; e = {GetTheClusterNameSomehow}}

  ?

  Thank you!

  Something like this should do the trick.

  $vm = Get-VM -Name MyVM$vm | Select Name,@{n="Cluster";E={  $rp = Get-View $_.ExtensionData.ResourcePool  $parent = Get-View $rp.Parent  While ($parent -isnot [VMware.Vim.ClusterComputeResource]){    $parent = Get-View $parent.Parent  }  $parent.Name}}
  

• How to see the models VI3 on Virtual Server 4.1

  Hi all

  I'm migrating my old infrastructure VI3 (ESX3.5U5) to a new vSphere 4.1 a.

  That I create a new database on V4.1 I have to disconnect all virtual Center2.5 ESX3.5 to connect tp Virtual Server 4.1.

  I have a lot of templates on each ESX3.5 but when I reconnect the ESX3.5 to the Virtual Server 4.1 I don't see all of my models.

  Any idea?

  TKS for your help.

  If you browse data warehouses using the browser to store data, you should find all your models here.  Once locate you them, right click on the .vmtx file and "add to the inventory.

  For an overview of all models 'zombie', you can use RVTools (tab Vsante)