PRE10 64-bit REALLY made use of any extra RAM?
I'm in the middle of a DVD burn on the record with elements of first 10 64-bit (installed on Windows 7 Ultimate 64-bit). I have 5 gigs of RAM, but according to the Task Manager only 2.11 GB total is in use. so... Does the advantage announced to be able to use more RAM really existed? In theory, it should, but I'm feeling a little to chip away by what I see.
After taking a glance at all the elements of the physical memory on the performance tab in the Task Manager as well as the memory tab in the resource, monitor I realized I didn't quite understand the memory usage as I thought I did. I did some Internet research on the topic and ran across http://brandonlive.com/2010/02/21/measuring-memory-usage-in-windows-7/ who makes a good job of clearing things up.
While the graphics memory bar in Task Manager > Performance showed only 2.11 GB used he showed as much memory being Cached. Apparently the two values must be added to determine the total amount of data actually in RAM. The cached data is information are not currently supported by the processor and RAM to rather than writing in a file on the hard drive. Apparently, all of my RAM (with the exception of a few MB) was in use after all.
I work with video captured VHS that was captured in H.264 format. Since this is the SD video, I guess it would help to explain the lowest amount of physical memory actually in use than I expected.
Live and learn...
What about the 5 GB of RAM... Yes it is a bit special. The computer is a Dell XPS 600 older with a Dual-Core 3 GHz Pentium and bus at 800 MHz. He had 4 GB of RAM (four 1 GB sticks). I came into possession of a key to 2 GB of RAM and had to shoot one of the existing 1 GB sticks to use. If the three sticks of 1 GB original more key 2 GB "more recent" gave me a total of 5 GB.
Tags: Premiere
Similar Questions
-
Vista 64 bit does not use 4 GB of RAM on my Qosmio X 300
Hello
I've got Qosmio X 300-14 L loaded with Vista 64-bit.
The operating system recognizes my 4 GB RAM (right click on computer then properties), but when I look at the Task Manager,
the available physical memory is approximately 1 800 MB.What can I do?
Thank you.Hello
You use the factory settings or you have Visagt 64 bit from a disc of Microsoft?
Normally Vista 64 bit you should be able to use all 4GB. You have also installed all updates for Vista, especially Service Pack 2?
Check this box! -
PS Elements 13:64 - Bit Version can use 16 MB of RAM?
Hello
I want to know if the new Photoshop elements 13 is a 64 bit Version and can use my 64-bit system Mac Yosemite? Important for me is that the version can use all my RAM (16 GB) to create large panoramas. My version 11 cannot create great panoramas, because he can not use more than 3 GB of RAM.
I'm sorry for my bad English :-)
Thank you!Andrea
In theory, pse 13 could use all of the 16 GB of ram, but in practice, it can not because your operating system / other applications need little ram to operate.
Define the use of the ram in pse 13 between 70-80% and that should give pse 13 more than enough RAM.
Adobe Photoshop elements editor > Preferences > performance
-
my computer does not use all of my ram
I havd this problem before 10, but now its become a problem for me. I can only use 7.22 on my 8 GB of ram. And now when I open my application such as monitoring high game like black ops 3 and 2, he is using barley any what ram then it did when I had windows 8. It now uses 500 000 but before used as 1 000 500
Hello
It is quite normal because the machine must reserve RAM for video card especially in material. I can show you a machine that needs to use the 96 GB of RAM for hardware:
Kind regards.
-
By "delete private data", is the removal of really made history?
Data gradually increase when I use firefox, and a response of "suppression of private data" extremely worsens.
By "delete private data", is the removal of really made history?
(I translated it into English in "Mail-Hon'yaku-Concierge".)
Deletion of data? What data are you talking?
-
Error 0x0000007B blue screen VM boot with 32-bit Windows 2003 using VMware Converter 4.0
Error 0x0000007B blue screen VM boot with 32-bit Windows 2003 using VMware Converter 4.0
I want to create a virtual machine using VMWare Converter 4.0 from an Acronis True Image to ESXi Server 3i .tib backup file. The conversation seems to be working, but when I try to start the virtual machine, it begins to start, displays the Windows 2003 splash screen briefly and then fails with a blue screen with the following error:
STOP: 0X0000007B (0XFFFFFADFD520F3C0, 0XFFFFFFFFC0000034, 0 X 0000000000000000, 0 X 0000000000000000)
Looking through the forums I've seen this error mentioned with 64-bit Windows 2003, but no mention of 32-bit?
Any help much appreciated.
THX
> Thanks, unfortunately the .tib Acronis True image files do not work with Converter 3.0.3
You already have a virtual computer that start - it's just bluescreens - so no need to run the full convert again.
Juist use Converter 3.0.3 to configure the virtual machine - part seemed to have failed
___________________________________
Description of the vmx settings: http://sanbarrow.com/vmx.html
VMware-liveCD: http://sanbarrow.com/moa.html
-
What model is the iPhone Unlocked sim-free 6 s, model 1633 or 1688? The locked phone can be unlocked and used on any sim?
If the iPhone is locked: only the provider it is locked, can unlock.
-
I am unable to PDF vacuum garbage. I get a pop up: the operation cannot be completed because the item is in use. Any suggestions?
Are all the other apps open while you try to do this?
-
If I use at any time update in windows vista home premium upgrade to complete, I need a Windows Vista Ultimate key to activate too?. Please answer
Yes.
You will need to BUY a Vista Ultimate Upgrade product key/license disk
Windows Anytime Upgrade Vista is no longer available; which you always had to pay anyway...
Try to buy Vista Ultimate Upgrade online: newegg, amazon, etc.
Alternatively, try your local computer store.
This isn't for free.
See you soon.
Mick Murphy - Microsoft partner
-
Can I restore a backup made using Windows OneCare Backup now that it has been discontinued?
I am running Windows Vista and need to restore files from a backup made using Windows OneCare backup before it was abandoned. Is it possible to do this?
http://social.Microsoft.com/forums/en-us/onecarebackupandrestore/threads
Windows Live OneCare Backup and restore
They will help you with this question in the Forum in question above.
See you soon.
Mick Murphy - Microsoft partner
-
After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------
Then lets refresh the USB stack
Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
all except the category itself - REBOOT - it refreshes the drive and battery USBThis KB shows XP how to and the method of Vista is identical
http://support.Microsoft.com/kb/310575----------------------------------------------
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGBHardware devices not detected or not working - Mr. Fixit
http://support.Microsoft.com/GP/hardware_device_problems------------------------------------------------------------------------------------------
If no joy, see Toshiba Support and/or their forums:
Toshiba support and drivers
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba Support Forums
http://laptopforums.Toshiba.com/Contact Toshiba
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactI hope this helps and happy holidays!
Rob - bicycle - Mark Twain said it is good. -
Replace with Win 7 32 bit XP Mode using the oem license key?
We have some old software that requires a 32 bit OS. There is no way around that it will never support 64 bit, but must use it occasionally.
Currently, we run with XP Mode installed Windows 7 Pro 64 bit. As Microsoft ends support XP on April 8, 2014, we want to move a virtual machine to Windows 7 32 bit.
Is it acceptable to use the same license key OEM on the bottom of the laptop to install Windows 7 32 - bit in Virtual PC instead of the XP Mode or do we need to buy more licenses of Windows 7?
Windows Virtual PC can be used independently of Windows XP Mode, but as noted, if you use another version of Windows such as Windows 7 32 bit, you will need to purchase an additional license. The license at the bottom of your laptop is already linked to the host machine on which it is installed.
-
is it possible to install a 64-bit version and use the 32-bit license key?
Hi, I'm Gian Carlo. I bought and activated a windows 7 pro 32 bit version, in fact, I need Windows 7 pro 64-bit version. so is it possible to install a 64-bit version and use the 32-bit license key? is it valid? I tried but its key invalid showing... I heard 32 bit or 64 bit again we can select one with the same key... is this true? How to do? Please help me up... Thank you...
Hi, I'm Gian Carlo. I bought and activated a windows 7 pro 32 bit version, in fact, I need Windows 7 pro 64-bit version. so is it possible to install a 64-bit version and use the 32-bit license key? is it valid? I tried but its key invalid showing... I heard 32 bit or 64 bit again we can select one with the same key... is this true? How to do? Please help me up... Thank you...
As long as they are the same edition, Yes, you can use the same product key to install the 64 bit version of Windows 7 Professional.
Skip entering your product key Windows 7 and complete the installation.
When you reach the desktop, click Start, right-click on computer
Click on properties
Scroll down to the Windows Activation
Click the link x days before activation.
Click on the link that says: "show me other ways to activate.
Enter the product key
Click next
Select the Activation of the phone
Click Next when you enter your key page
Select your country
Click Next, call the number listed
Be sure to explain your situation to the Appeals Officer.
Provide the installation generated when ID requested by the call agent
They give a confirmation ID in return, enter it
Click next to complete the activation.
However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
or
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
Hi, when I connect to my Wired XBOX 360 controller to my PC the guide button flashes once and there is no answer. I use 32 bit Windows 7, Dual core 2 GB Ram DDR2
Hi JamBoard,
It is possible, that you need to install the drivers for the controller. You can get them from here:
http://www.Microsoft.com/hardware/en-us/p/Xbox-360-controller-for-Windows#support
However, if it's not too hot, it could be a real hardware problem.
Thank you!
-
This is how it brings together files I have Acrobat 10 when I try to combine several files with names like 0022_0_ point report 0022_2_Item report through report 0022_15_Item it combines out of use. Any ideas?
Hi tomp29181935,
Please refer to this page:placing the pdf of the numerical order when combining (combining files)
Let us know if you face any problem.
Thank you!
Shivam
Maybe you are looking for
-
On my mac e-mail folders gone after upgrade of El Capitan
After an upgrade of the Mavericks 10.9.6 El Capitan 10.11.6 yesterday, everything works fine but all folders on my Mac in Mail disappeared, and just downloaded Mail 2000 + new mails in the Inbox instead of their files based on rules. All accounts are
-
Firefox worked on my Windows 7 desktop. One day he gave me a report of crash at startup, I went through the troubleshooting procedures suggested. I tried restarting, upgrade, uninstalled and reinstalled, uninstalled and cleaned the files and the regi
-
Shop at home took my bowser on my desk.
E only info I can get is the shop at home Web site with detailed instructions that are simply there to prevent its removal from the browser. It's a shop at home, not browser a Firefox browser more and I cannot get it back. the only information that I
-
Firefox IS the browser is perfect for me, it's fast and everything was good, but when I opened it a search bar appeared next to my tabs. Is a way to remove it? If not, is it possible to restore one of the versions of previous firefox which does not c
-
Impossible to verify the Photosmart C6180 ink levels
Can someone tell me how to check ink levels please.