Precision M6800 corruption (over-pants) on 2nd display

Similar Questions

• Precision M6800 video driver upgrade inquiry

  Hi all

  Well, I was finally able to upgrade my Vostro 3700. The Vostro was a good system, but it still ran hot. Dell has been kind enough to share my system with precision M6800. So far, I got the same EXCELLENT customer service with the number of calls on my Vostro overheating. With this new laptop, I think they have finally reached the mark, he is NOWHERE near as hot as the Vostro 3700 on idle and all playing games.

  That being said, I'm trying to update my video drivers. There is a 4600 Intel integrated with the Intel Core i5 processor and an AMD over-pants M6100. Both using PowerPlay to manage graphics cards. I already downloaded the Intel and AMD video drivers from the Dell Support Web site. There is a warning on the Dell AMD driver page advising that the Intel driver must be installed first. When I try to install the Intel driver, I get the following error message:

  ""This computer does not meet the minimum requirements for installing the software.".

  So now I must ask, what else do I need to install the latest drivers?

  I also downloaded the drivers of Intel provided site and he informed that I need to go through the manufacturer to obtain the latest drivers.

  Any help would be appreciated.

  Thank you

  Johnathan

  @Ravi,

  Since the condition Dell drivers did not work, I went to Inte.com and AMD.com and downloaded both of their drivers for the Intel HD 4600 and the AMD over-pants M6100. I made sure that all video cards have been uninstalled and their drivers deleted, except for the GDIHOOKS which I was not sure.

  After a clean reboot, I started to install the Intel drivers, no complaint has provided the installer driver and installed without error. Restarted after installation. The screen change resolution to something more preferable and it seems to have worked very well. Suite on...

  Started website AMD over-pants AMD.com pilots. They have not also complain of mounted, etc. Installation took longer than expected because it is a larger set. It is installed without problem. Restarted. No other error and everything seems good.

  A test, I checked my energy saving settings. Maximum power on all saving battery related. Maximum performance on all associated Plugged In. Now, unlike before, when executing a pile, I get about 8-9 hours of battery life. Front when disconnected with the same power settings I received only about 2 hours. Plug the AC adapter in and launched Portal 2 with all its parameters back to the maximum with a resolution of 1600 x 900. Works very well. No delay, the graphic is great, works well.

  Thus, as it seems the site provided Dell.com drivers either have problems with this model and the BONES (M6800 Precision Mobile Workstation with Windows 7 64-bit), or they do not work properly.

  For anyone else who is curious, here are the links to the drivers I used:

  AMD: http://support.amd.com/en-us/download/workstation/mobile?oem=Dell&os=Windows%207%20-%2064

  DOWNLOAD: http://www2.ati.com/drivers/firepro/mobile/13.152.4-whql-dell-mobile-x32x64-163382.exe

  Intel: https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Graphics&ProductLine=Laptop+graphics+drivers&ProductProduct=4th+Generation+Intel%C2%AE+Core%E2%84%A2+Processors+with+Intel%C2%AE+HD+Graphics+4600&ProdId=3720&LineId=1101&FamilyId=39
  DOWNLOAD:.

  Thank you

  Johnathan

• No hardware acceleration of OpenCL with AMD over-pants W5100

  Hello

  I use

  First Pro CC 10.3

  AE 13.8.0.144 on one

  Dell Precision T1700 system:

  -10 64 Windows

  -AMD over-pants W5100 (FireGL V)

  -Intel Core i7 - 4790

  -Ram 16Gig

  After that the update of Adobe CC last first began to warn me that im about to open projects to take advantage of acceleration GPU (OpenCL) which is not available on my system.

  In the project settings, I can not change the rendering engine of mercury as 'Software' is grayed out.

  Not able to use OpenCL on new projects or im. Old projects where created on the same hardware and open until recently without any warning.

  I phoned AMD, they said that their latest driver would not support OpenCL and I should return to the "15.201.2401 - whql-over-pants-retail", I did. It does not solve the problem though.

  The motherboard has an integrated graphics card. Maybe that has something to do with it?

  Any suggestions are appreciated.

  Thank you

  Indeed, it was the graphics card Intel! But I don't disable it in the BIOS, but through the Windows Device Manager.

  Now it works again.

  Thank you!

• How to configure AMD over-pants w5100 for sequels

  Hello

  I recently bought AMD over-pants w5100 4GBgraphic card. I use CC effect. I noticed that the performance is not optimal. I wanted to know how to configure this graphics card for optimal use with over-pants w5100. I also noticed, the Ray-Tracing is showing CPU, the GPU option is disabled, as you can see the attach screenshot ' not available GPU - incompatible device or display driver.

  Here's my spec system.

  Operating system: Windows 7 Ultimate 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408) - 1631

  Manufacturer: MSI

  System model: MS-7693

  Processor: Processor with Six cores AMD FX (tm) - 6300 3.5 GHz

  Memory: 24576 MB of RAM

  Available OS memory: 24524MB RAM

  DirectX version: DirectX 11

  System DPI setting: 96 DPI (100%)

  DWM DPI Scaling: disabled

  DxDiag Version: 6.01.7601.17514 32 bit Unicode

  

  Thank you

  Æ use the GPU for very little. See the following page: features GPU (CUDA, OpenGL) in After Effects

  Basically, the only thing AE to use is obsolete ray-traced rendering engine. The ray-traced rendering engine relied on technology CUDA from NVIDIA. It was only accelerated on some NVIDIA cards. A card AMD will never work with the ray-traced rendering engine, but it's normal because very few people using the ray-traced rendering engine! Instead, use Cinema 4 d that comes free with AE or use a third-party plugin like element or Invigorator 3d (which can use the AMD maps).

• Vs GTX 980 Ti Quadro K4200 vs AMD over-pants W7100

  I have change and color of image quality raw RED 4.5 K in Premiere Pro. I want to get a 10-bit, 4K display and need to upgrade my GPU to run it.

  The standard position seems to be "NVIDIA are much better than AMD CUDA being much better than OpenCL", but there is a compelling case for the week of specifications and compatibility:

  	GTX 980 Ti	Quadro K4200	AMD over-pants W7100
  4K @ 60 Hz?
  10-bit color?
  Hearts CUDA	2816	1344	No CUDA (OpenCL 2.0)
  GRAM	6 GB	4 GB	8GB

  • Downgrade to 1440 p/monitor 10-bit / a Quadro.
  • Just accept no 10-bit color, get the GTX 980 it
  • Go AMD, but risking worse performance (e.g. Debayering R3D files).

  Please advise, I'm stuck!

  Thank you

  Declan

  ---

  Windows 7 64 bit
  Intel 4790K

  32 GB RAM DDR3

  Current GPU: GTX 750 Ti (who plays 4.5 K R3Ds 1/4 resolution without problem).

  unless you plan to dual quadro k4200 or over-pants w7100 running, you may not be satisfied with their performance. Depending on your project, a single gtx 980 ti should be able to handle the Red images. with regard to the 10 bits of output, just get a video card aja or blackmagic to feed your 10-bit monitor.

• HP LS993AA AMD over-pants V7900

  Hello
  I have a question. I am building my own computer for 3D engineering.
  I want to have the over-pants v7900
  Now my question is,
  Can I use the HP LS993AA AMD over-pants V7900 in my building, or is it only compatible with HP computers?
  I have a processor Intel core i7 4th generation
  Card mother ASRock Q87M
  32 GB of Ram
  240GB Samsung SSD
  
  Would be great if someone could answer my question.
  
  Welcome,
  Yasin

  Hi Yasin1990,
  
  
  
  HP LS993AA AMD over-pants V7900, should work with the computer that you generate. I have included the "AMD over-pants™ features graphic V7900» As long as it is supported by the motherboard you will use, you shouldn't have a problem.
  
  
  
  Kind regards.

• HPE-510 t does not start with AMD over-pants W5000 (Windows 8.1)

  I just bought an AMD over-pants W5000 (TDP = 75 W) to replace my nVidia Quadro 600 (= 40 W TDP) in my 2011 HPE-510 t (i7-2600, 12 GB of RAM). Dell U2913WM monitor.

  My machine does not start with the new inserted card. I upgraded a 450 W Antec VP450F 300W stock power, but that has not changed the start situation. I tried DisplayPort and Dual-Link DVI - D.

  Someone at - he was able to get the AMD over-pants working in an office of this generation HP?

  Thank you

  Mike

  Hello

  Open RUN (win + x key) and enter: MSINFO32

  What level of your PC BIOS runs?

  If you can not enter the BIOS at startup so be sure that your keyboard is plugged into a USB 2 port.  Otherwise some time in Windows 8 go to Advanced Options.  See the image below.

  

• AMD vs. Nvidia Quadro over-pants?

  Hello guys,.

  I'll buy a new graphics card in the next few days. I did a lot of research in which buy: over-pants w8100 or Quadro m4000.

  I was wondering if which of these cards will occur at the TIME REAL PRECEDENT and RENDERING?

  Some of the people actually said that AE support CUDA and over-pants isn't a good choice when it comes to maps of EI.

  But AMD has clearly said on their Internet site, AMD over-pants™ and Adobe graphics card = they did team with Adobe to fully optimize their FirePros.

  So, what would be your recommendation?

  Current PC installation

  I7 5930 k

  32GB DDR

  225 GB SSD

  2 x 1 TB HARD drive

  Mobo Gigabyte x 99

  The latest version of After Effects use the GPU for very little, so I wouldn't worry AE too. First is a lot more heavy-GPU.

  People who say that AE uses CUDA are wrong. They probably think of the old ray-traced rendering engine. It only uses CUDA on some NVIDIA cards to speed up, this is a deprecated feature I would recommend against the use at all, so don't worry about this.

  The latest version of After Effects (13.8.1) has 3 effects GPU acceleration (Lumetri, improve sharpness and Gaussian blur nine). These three effects use CUDA or CL open on Windows machines.

  However, NVIDIA cards tend to work better for video work in all areas - even in the 3d world with GPU converters like octane number (one of the most popular third-party converters for Cinema 4 d), the results are much better with NVIDIA or are possible only with NVIDIA.

• AMD over-pants D500 unrecognized by the first.

  Trying to diagnose why my first is extremely slow. I looked at the parameters of the project and the rendering engine is stuck on 'Software Only' and is grayed out. I'm a new MacPro Late 2013 3 GHz 8 core Intel Xeon E5 32 GB ram AMD over-pants D500. I opened the same project on an iMac and it was smooth as butter and I had options for GPU or only the software.

  Thank you, Kevin. I tried those but without success. I just tried and cleared out my preferences and it does the job.

• Illustrator and inDesign: over-pants D500 or over-pants D700?

  I am looking to buy a new Mac Pro. I was wondering if I should choose the Dual AMD over-pants D700 with 6 GB memory GDDR5 or the Dual AMD over-pants D500 with 3 GB memory GDDR5. The Mac will run for the most part, Illustrator and InDesign and used to create a POS, signage and vehicle graphics. I do not create or edit video files or 3D. I guess that to put it more simply, Illustrator and inDesign will benefit from the additional resources available on the D700 over-pants?

  If you're just doing 2D work, no, not by any means. up to a high level of complexity, you can get away with a lot less.

• Windows 10 Pro x 64 mit Photoshop CC 2015 erkennt over-pants W7100 nicht, Fehler oder noch nicht compatible?

  System:

  HP z440

  Xeon Quad Core 3, 5 GHz

  16 GB OF RAM

  AMD over-pants W7100 mit catalyst 15.201.2401.0

  Ist das ein shows problem (unter Windows 7 war das kein problem). Sharp works nun mit Windows 10 auch problemlos, dafur erkennt die Grafikkarte nicht mehr Photoshop Illustrator hat mir unter Windows 7 erzählt die GPU-example Ute erst mit Windows 8 oder high available (Windows 8 habe ich Windows 10 1511 frisch installed applications). Kann ich had steer unternehmen oder muss ich yesterday auf ein Update warten?

  Beste Grüße

  Hej Akash

  I can confirm that the 15.201.2401.0 version does not work with windows 10 x 64 (build) 1511 a cc photoshop 2015. version 15.200.1062.1004 as of August 2015... It works very well including catalyst control center.

  concerning

  Yves

• How to use the GPU for the AMD over-pants D500 in Mac pro 2013

  I install the first CC 2015 Pro and After Effect CC 2015 to 2013 with the graphics card AMD over-pants D500 Pro Mac, I can set GPU rendering in Premiere Pro, but impossible to define in the After Effect, only can use the CPU in the preview of the setting, how can I do?

  AE uses only a few NVIDIA CUDA enabled cards to speed up rendering drawn with RADIUS. This feature never quite worked, with disabilities masks and effects on layers 3D, and NVIDIA has changed the direction of their development of this technology for the Ray-traced rendering feature is is more developed by Adobe. They are working on another technology to use the GPU, but it is not yet available. There is nothing you can do to enable the GPU acceleration, unless you have a compatible NVIDIA card.

• No video preview after the over-pants ati driver update

  Hello, after uninstalling the old drivers, I installed the latest drivers over-pants 14.301.1019. I have now no video playback in a preview window. (What is happening also in sony vegas 13.pro)

  I have a 64 bit windows desk top 7 PC with an ATI over-pants V7900 card installed.

  I can play video files in other programs like TMPGENC works, quick time player etc it just seems to be editing programs that have lost the ability to read the files.

  The files are a mix of HDV, avi ciniform files and ciniform mov,

  I tried a reinstall of sony vegas and that made no difference.

  I tried to reinstall the old drivers, but it makes no difference.

  Has anyone else seen elsewhere, or have a solution.

  Thanks John.

  sounds like a driver issue since it occurs in both programs. both have a possibility not to use the gpu for rendering/acceleration. I do not use amd graphics card, but when you install y at - it an option to remove the previous or pure settings install?  you might need to uninstall all software AMD, reboot and then reinstall. from time to time of the graphics drivers just don't install correctly in windows and amd software is known for its problems...

• CS6 Production Premium supports AMD graphics cards? Specifically over-pants M6100. If so, all the features work with the M6100, or are there features that work only with nVidia video cards?

  CS6 Production Premium supports AMD graphics cards? Specifically over-pants M6100. If so, all the features work with the M6100, or are there features that work only with nVidia video cards?

  CS6 does support OpenCL and OpenGL?

  Are all features that CS6 supports for NVidia Cuda available for the M6100 OpenCL?

  Bill supposed to first Pro CC (not CS6) response. Windows of Premiere Pro CS6 version does not support OpenCL for accelerating GPU of MPE. Therefore, there is no "opencl_supported_cards.txt" file in the folder of Premiere Pro, and the code to OpenCL is disabled permanently in all versions of Windows from Premiere Pro CS6. So, for your over-pants M6100 Premiere Pro CS6 will be permanently locked to only software MPE mode. (Acceleration GPU of MSES in the Windows of Premiere Pro CS6 version is limited to the CUDA only, which means that only NVIDIA for GPU - no AMD over-pants or GPU Radeon support CUDA at all.)

• Mercury Playback Engine option in first Pro CS6 GPU acceleration not on the new Mac Pro Tower 6 - Core Intel Xeon E5 AMD over-pants D700?

  Mercury Playback Engine option in first Pro CS6 GPU acceleration not on the new Mac Pro Tower 6 - Core Intel Xeon E5 AMD over-pants D700?

  How can I get the Prime Minister to allow me to use the GPU of Mercury Playback Engine acceleration option?

  WilsonMark wrote:

  This applies to the new Mac Pro w / D700 cards?  If so, can you please explain how to change the settings.

  I have CS6 installed longer, so I don't remember the exact tree that he uses.  There are 2 text files, that you need to remove.  We're in the Premiere Pro installation directory, and the other is in the Adobe Media Encoder, a.  You locate the file called opencl_supported.txt.  You can find this file in the installation directories.  Delete both.  PR of restart and you should be able to choose OpenCL as the hardware renderer.