Save the Remote Agent with ACS

Similar Questions

• Unable to connect to the Remote Agent of VMware Converter

  I'm trying to V2V an our old infrastructure of VMware 2.5.x our vSphere infrastructure W2K Server.

  I've done several servers of the old infrastructure without problem.

  On this particular server, however, fails with the error "Unable to connect to the Remote Agent of VMware Converter"

  The journal of the points below on the $ IFC share.

  [2011-01-14 12:32:40.008 'P2V' 4788 info] [ClientConnection, 101] Connection to IPC$ on 10.101.0.171 like 10.101.0.171\administrator
  [2011-01-14 12:33:10.086 'P2V' 4788 info] [, 0] SMB Manager: connection error for share [\\10.101.0.171\IPC$]: 1792

  [2011-01-14 12:33:10.086 'P2V' 4788 WARNING] [ClientConnection, 115] Unable to connect to IPC$ on 10.101.0.171. Reason: Error unspecified in the mechanism of the remote execution
  [2011-01-14 12:33:10.086 'P2V' 4788 info] [ClientConnection, 119] Renounce the attempt to connect to IPC$ on 10.101.0.171
  [2011-01-14 'P2V' 4788 error 12:33:10.086] [task, 295] Task failed: P2VError REMOTE_UFA_FIREWALLED (10.101.0.171)
  [2011-01-14 12:33:10.086 'P2V' 4788 verbose] [task, 339] The transition of InProgress asked congestive
  [2011-01-14 12:33:10.086 'P2V' 4788 verbose] [task, 388] Successful passage

  Any suggestions for a solution would be appreciated.

  It looks like maybe the firewall on the server. Install the converter directly on the machine you want to convert, or temporarily disable the firewall.

• Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi?

  Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi? When I try this Apple TV does not appear in the list of devices on my iPhone.

  Yes, I'm doing exactly this with the same put in place.

  If the problem persists the next relative to the following articles might help you.

  Troubleshooting home sharing

• Is it possible to save the shapes drawn with the pen tool?

  Is it possible to save the shapes drawn with the pen for reminder tool later?

  As for example save selections in Photoshop?

  I use Indesign CS2

  Library to use for this. Or extracts.

  Reuse of graphics and text in InDesign

• The Remote Agent Upgradition

  We need to migrate ACS version 4.2.0.124.16 to 4.2.1.15.8.The same way we have Remote Agent 4.2.0.124.14 to 4.2.1.15.8(hopefully la fois ACS et RA doivent s'exécuter sur la même version).

  What is the procedure to upgrade RA on Win 2003... ? (Backup file while migration)

  Do we not have to uninstall before proceeding... ?

  ini and config file provider review... ?

  Restoration...?

  All quick help on this would be helpful...

  Yes you need to uninstall the previous installation of RA before upgradeing to 4.2.1.15.8

  I have noted problems with patch 8, sometimes it create problems with ACS services. I suggest you apply.

  Should not take backup of the .ini file. During the installation of RA, it would invite, you can enter the IP address of your primary SE ACS.

  Kind regards

  Jousset

  The rate of useful messages-

• "Cannot display Page" error when you click the Remote Agent

  Hello world! ACS SE 4.0, we have installed and we have added a remote agent running on Windows Server 2003. Recently, we encounter "Cannot display the page" error when we click on the RA under a group of network devices. It's resolved by restarting the device SE ACS and access the web console for ACS still once, but after a few hours, the problem reoccur. By clicking on the links on the web console for ACS is OK at first, but after clicking on the RA, each link displays the error "Unable to display the page." Hope you could help me with this problem. Any person support is much appreciated.

  Thank you!

  Hi Jas,

  Here is the bug CSCsg40444.

  Kind regards

  ~ JG

  Note the useful messages

• The remote database for ACS 5.3 compatibility

  Hi all

  I'd like to check either Microsoft SQL Express 2012 is in working with ACS 5.3 remote database?

  Thank you

  Noel

  It should work with both. I have seen a few cases for Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 with 64-bit operating system.

  Jatin kone
  -Does the rate of useful messages-

• Unable to save the secondary instance of ACS.

  Hello

  I did upgarde IOS on an instance of the ACS and tried to register in the main proceedings. I get an error message 'Could not be saved due to IP address or hostname not valid'.

  > IOS is the same as in the primary.

  > DNS is resolve the two instances of ACS IP address.

  > Tried with the two great account admin (default and created manually)

  Still I am facing the same issue. Related snap is attached.

  Can someone help me on this please.

  I was unable to view the image.

  after upgrade acs 5.5 secondary server cannot register the main server
  CSCum86626
   

  Description

• Two questions - cannot save the printer shares with the error code 0x000006d9 and part of the Machine is not accessible from the network of working groups

  I think this are problems, but here is the separately questions, first of all - the basics:

  4 PC network using the working group with two Windows 7 (ultimate) and two xp.  Everything worked fine with the a previous vista / xp 3 network.  All except the Windows 7 Desktop behave well. The network is connected with a modem cable to a 5XT netscreen NS (firewall hardware to the outside and the inside hub), a netgear wireless access point and Windows workgroup use (as mentioned above).  Name all is correct on all machines, all the discovery settings are in place and each has Norton Internet security for its local protection services. Upgrades of Windows 7 have been computer vista laptop connected wireless and wired desktop previously running XP Professional sp3.  XP conversion was assisted on the desktop of the wizard upgrade Laplink PC Mover.  Applications executed in appearance on the two level computers.

  On the desktop - I can't share printers. When I use "networks and printers" in the start menu to share on a printer I get code 0x000006d9 error saying something like the configuration cannot be saved.  All local jobs printing works well.

  On the desktop - the name of the computer records also of all as on the network (it is discovered and mapped by each PC) but when I try to access it from any other machine I get a general error says something like "check your spelling of the name mannequin." This desktop computer Win 7 can browse shared folders on the network of and write about everything.  Somewhat added data - this device can ping all others in the network sucessfully but none get a ping successfully into the offending machine either with ip address or computer name (times out waiting for a response or said the name is not found).  He himself can ping successfully.  It accesses the internet very high hand.

  Solutions have been attempted without a firewall (Firewall Norton Smart Internet - 2010), with the firewall and various changes to authorization.  A final discovery was that Windows Firewall will not allow because BFE is not able to start - error 5 - access denied (this was discovered by train to allow a possible solution because of some internet chatter that the Windows Firewall must be running to implement shared printers).  All other dependencies are running to get a break on why BFE is not (it turns on the Win 7 laptop as well as the firewall).  Authorizations have been verified in the registry for settings of firewall and BFE (ports, permits, etc.) have also been looked at with a very critical eye.  SFC has been run with no problem.  All ports for net drivers, Win 7 networking and other actions are open in the firewall.

  Then people - I did some internet research and I tried a lot of suggested solutions nothing doesn't.  My apologies in advance if a person provides a solution and I say "tried".  Any help is very appreciated

  You can mark this as resolved problem!
  The program involved, causing this error is firewall Windows, here is what you need to do to fix this...
  If like me you have disabled windows firewall, I use Security Suite of ZoneAlarm, you will need to re-enable the firewall to share the printer.

  If you have disabled or turned off the Windows Firewall. (and in my case this error was caused by exactly that)
  Step #1 - disable any other firewall can be installed. Stop to load at startup and restart your PC.

  Step #2 - go to the tools of Admin folder > Services > Windows Firewall > double click and is it set to manual or automatic and keep it.

  Step #3 - open Control Panel > system & security > Windows Firewall > enable or disable the Windows Firewall > (Enable) turn on the Windows Firewall > save
  Then go to Restore Defaults > click on restore default button > save
  (you only do this IF you have changed the settings of the firewall, but it is always a good idea and will ensure that there are no problems during the proceeding)

  Step #4 - click Control Panel Home > view devices & Printers > Select / click on your printer > screen printer properties > share > share this printer > OK

  Step #5 - go back to firewall Windows and the tower he walks back > save

  Step #6 - go back to Services > and the Manual value Windows Firewall (or turn it off if you want, I recommend the manual)

  Step #7 - reboot and re-enable your firewall preferred to start at startup > Reboot

  Step #8 - take a deep breath and sigh of relief! :)

• After scanning in a file, I can't save the PDF file with a unique file name, it will only back up in its original name; Otherwise, if I save the name of the file under a new name, save it box goes outside and the file is renamed and saved. Help!

  If I analyze the file and its original name is:

  Ssrv395alm76439... and I want to rename it "background."

  If I have the rename, the file won't save. If I leave the file as it will save and I have to go to an additional folder and rename it.

  Help, it's too long. I just click on "Save as" and rename and save the document in the necessary folder at a time!

  Hi Allisonchristinele ,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after crossing "" help > check updates "»

  Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

  Like 'save' will save the changes with the file & "save under" will give the window using which can save the file to any location on the system.

  I would like to know is what is happening with some or all the files.

  Also, please try to check with the different user account to reproduce the problem.

  Kind regards

  Christian

• Save the Muse file with older version

  I'm working on a Web site with another person across the country. I upgraded to Muse CC, she didn't. Is it possible to save the changes I do in a way which she can then make future changes to the file?

  Hi Luis,.

  Please refer to the response of Zak in this related question, why I have to "save under" a Muse site, I've been working on?

  Muse supports not 'save back' either export to an earlier version, so if you need to share the file with another person who uses an earlier version or for a reason, go back to the previous version of Muse, you must file in the older file format.

  If you already use an automated backup system and/or store your .muse file in a cloud folder synchronized, keeping the extra copy is not necessary, since these mechanisms would provide another way to revert to a previous version of the file, if need is always.

  - Abhishek Maurya

• I want to save the PDF combined with my office

  I want to save the pdf file. on my desk

  You want to tΘlΘcharger the Files.Acrobat.com file on your desktop?

  Once you are connected to files.acrobat.com

  Select the file you want to download

  Select the download icon

  

• How to configure the remote agent to talk to the server of OLT

  Hi all

  I just install OAT 12.3.0.1 on Linux server and also install a separate OLT agent on Linux oul5x64

  Issues related to the:

  How can I configure this agent to communicate with the backend of OLT.

  Thanks in advance.

  Hello

  You must configure a system remotely from the console of OLT (menu Tools, I don't have the GUI in front of me).

  You must make sure that your agent is running. There is a script to test the State of the agent.

  You must also make sure that the two machines can talk to each other with the same name & IP. BTA is very sensitive to this. Most of the problems of communication between the server from the OLT and agents is due to resolution of bad reputation. Better to day/etc/hosts on both sides with IP & names.

  Please give a try and let us know

  JB

• Restrict calls remote modem with ACS

  Hello..

  Using ACS I try to limit the reverse telnet access to a modem which will later be used by TTYredirector. I want users to have access to the modem only. We are on 3.01 ACS (yes I know old)...

  When to use access to the network with device restrictions: 2065: * (being the assigned line port 2065) subscribe to the denied service service = raccess tty65 in the journal of the attempts failed.

  Do I need to add this service to the GANYMEDE + under Interface Config?... What is the params? I tried to just raccess in services which added a section under user/group that I chose but nothing else.

  I have the router:

  AAA for authorization Ganymede + default reverse-access group

  Welcome tips, google has attracted so far zero.

  Paul

  Paul

  It's not the NAR causing the problem-, this would result in a message 'filtered user' in the failed attempts.

  Looks like the problem is that your group configuration is not allow the raccess service.

  Because this isn't a standard service preset in ACS you config sys goto then Ganymede + (ACS) and define a service personalized Ganymede. Call it "raccess". In the settings group, you will then be to activate and define all the attributes you need.

  Mounira

• How to save the data just with qml?

  is it possible to save data in an application just with qml?

  for example, I want to record some settings that the user has set.

  or an array of integers.

  or is it still possible to use sqlite?

  willie44 wrote:

  I could be completely wrong, but QSettings should work for you.

  The sample application QSettings is the spaceship one.

  QSettings is no longer usable in C++

  but this seems to be the only way to do