Precision maximum routing attributes

Similar Questions

• iOS5.0.1 attribute to "no backup" for the saved files?

  Anyone from Adobe knows if there are provisions to support the new iOS 5.0.1 way you should back up files?

  Since November, 2011, Apple has updated the way you need to save files on iOS 5.0.1.

  I know that there an extension ANE to solve the problem, you can find it at:

  voltage http://www.jampot.ie/ane/ane-iOS-Data-Storage-Set-donotbackup-attribute-for-IOS5-Native-ex.

  and the new rules of Apple here:

  https://developer.Apple.com/library/iOS/#QA/qa1719/_index.html

  In my opinion, this must be implemented directly in the ecosystem of AIR and doesn't depend on third-party solutions.

  As I did the StageWebViewBridge class and it widely uses the file system, I need that should be my next steps in development.

  Thank you

  Hello:

  This native extension can be really useful. Developers can prcisely control what happens to the backup to the cloud.

  But,

  You can also get around new data guidelines just iOS by adjusting the file API, because in iOS default behaviors for the directories there. for example (Documents is always saved, / Library/Caches are never saved). You can follow http://www.saumitrabhave.com/2011/11/air-ios-solving-apps-must-follow-ios.html

  If you need precise control over attribute, Native Extensions may be the best way.

• Recommended value for IPv4 FIB AAGR 7600?

  I'm just wondering if there is a "best practices" or widely accepted value inhabitants settled on?

  I understand that I ask a broad question, the best answer is "it depends."
  and each circumstance may have different needs and different values.

  Dilapidated fast from our network:
  IPv6 is enabled but unproductive, but we want the complete picture of IPv6 at year end.  No multicast and not necessary.

  Table full of IPv4, multihomed, and private peering.  Some 75 ASN us with peers.  No multi-path, no plans for her.

  RSP720-3CXL

  We hope to get another 4-5 years from the material, we are no where near capacity from fabric/backplane.  We do VoIP, packets, lower bps higher PPS.

  We are 95% with warnings of threshold.  default value of 512 k

  I saw an exchange of views and people seem to stabilize on 640 k.

  Any consideration is not to use 640 k?

  View orders:

  #show mls cef maximum-routes
  Maximum routes FIB AAGR:
  =======================
  Current: -.
  -------
  IPv4 + MPLS - 512 k (default)
  IPv6 + IP Multicast - 256 k (default)

  #show mls cef su

  Total of roads: 498430
  Unicast IPv4 routes: 496353
  Multicast IPv4 routes: 4
  Routes MPLS: 2049
  Unicast IPv6 routes: 22
  IPv6 multicast routes: 5
  Moe routes: 0

  #

  Use of the FIB AAGR: Total % used used (s)
  72 bit (IPv4, MPLS, MOE) 524288 498420 95%
  144 bits (mcast IP, IPv6) 262144 33 1%

  We settled with the below in 'standard' overall 7600 estate.

  #show mls cef maximum-routes

  Maximum routes FIB AAGR:
  =======================
  Current: -.
  -------
  IPv4 + MPLS - 736 k (default)
  IPv6 - 128 k
  IP Multicast - 16 k

  Use of module FIB AAGR: % Total used used (s)
  4 72 bits (IPv4, MPLS, MOE) 753664 540607 72%
  144 bits (mcast IP, IPv6) 147456 17731 12%

• Cisco 7600

  Hi all

  I got a guy with this command:

  See mls cef maximum-routes

  When I show this order, need is save the Conference running, to write new values size on FIB - AAGR tables?

  concerning

  Santiago

  Hello

  If you adjust the maximum roads, you must save and not reload when you issue the command show

  After you adjust the maximum-roads, you must Save the running configuration and restart the switch before changes become active (there are no operational impact before the reboot). After the reboot, you can enter the show mls cef maximum-routes command in order to view the new allocation AAGR

  http://www.Cisco.com/c/en/us/support/docs/switches/Catalyst-6500-Series-...

• IOS VPN on 7200 12.3.1 and access-list problem

  I'm in IOS 12.3 (1) a 7200 and have configured it for VPN access. I use the Cisco VPN client. Wonder if someone has encountered the following problem, and if there is a fix.

  The external interface has the access-list standard applied that blocks incoming traffic. One of the rules is to block the IPs private, not routable, such as the 10.0.0.0 concern, for example.

  When I set my VPN connection, none of my packets get routed and I noticed that outside access list interface blocks the traffic. When I connect to the router through VPN, the router attributes to the client an IP address from a pool of the VPN as 10.1.1.0/24. But normal outside the access list denies this traffic as it should. But as soon as I have established a VPN connect, it seems that my encrypted VPN traffic must ignore the external interface access list.

  If I change my external access list to allow traffic from source address 10.1.1.0/24 my VPN traffic goes through correctly, but this goes against the application to have an outdoor access list that denies such traffic and have a VPN.

  Anyone else seen this problem or can recommend a software patch or version of IOS which works correctly?

  Thank you

  R

  That's how IOS has always worked, no way around it.

  The reasoning is to do with the internal routing on the router. Basically an encrypted packet inherits from the interface and initially past control of ACL as an encrypted packet. Then expelled the crypto engine and decrypted, so we now have this sitting pouch in the cryptographic engine part of the router. What do we with her now, keeping in mind users may want political route she is also, might want to exercise, qos, etc. etc. For this reason, the package is basically delivered on the external interface and running through everything, once again, this time as a decrypted packet. If the package hits the ACL twice, once encrypted and clear once.

  Your external ACL shall include the non encrypted and encrypted form of the package.

  Now, if you're afraid that people can then simply spoof packets to come from 10.1.1.0 and they will be allowed through your router, bzzzt, wrong. The first thing that the router checks when it receives a packet on an interface with a card encryption applied is that if the package needs to be encrypted, it is from his crypto ACL and its IP pools. If he receives a decrypted packet when it knows that it must have been encrypted, it will drop the package immediately and a flag a syslog something as "received the decrypted packet when it should have been."

  You can check on the old bug on this here:

  http://www.Cisco.com/cgi-bin/support/Bugtool/onebug.pl?BugID=CSCdz54626&submit=search

  and take note of the section of the security implications, you may need to slightly modify your configuration.

• How to group JDev extension for distribution

  Hello

  I created an extension of JDeveloper on 11 GR 1 material. The extension will give an option under 'Run' in the popup menu jdeveloper. I am able to run the JDeveloper extension, by using the 'Run the Extension' option. Now, in order to distribute, I created a zip file with record jar and meta-inf of the project with bundle.xml. If I import the zip of the "check for updates", I can see the name of the extension by clicking next. After the reboot, I don't see the option which should be less "Run".

  Please can anyone suggest what Miss me?

  Thank you

  Hello

  Please check the minimum and maximum version attribute. You can try removing the as well.

• How do I filter the JTable lines such as changing data

  Hello
  
  all suggestions are welcome, I'm at a bit of a dead-end at the moment.
  
  So, I have a JTable supported by a table model. The data in the table are likely to change while the system is running, when it does certain events are triggered. Table pattern listen to the appropriate events so he could work on what line in the table must be updated, I can call then through the
  

  int row = determineWhichRow( changedDataObject );
  fireTableRowsUpdated( row, row );

  Correctly, this causes the row in the table to be updated. Now, the bit that's not going to. The user is able to activate filters on the table, more precisely on an attribute of the data in this table that changes. So when I raise the updated event I need to my line (with the filter set) re sorter - sort the table. Have a look there is a method on line sorter:
  

  getSortsOnUpdate()

  that the Javadoc, I thought I would create the behavior that I needed - assuming that I told it to return true. This after trying the functionality remains the same, that the data model changes, update the values in the table but the filters don't are not reapplied.
  
  Debugging in the code of the jdk to get an idea of what might happen on this subject seems that filters are called and it determines that the modified line must be filtered, but gets to a point where it was decided that because the event from the table model was an event of update should not call a repaint and resizing method and nothing seems to happen.
  
  I think that simply re-defining the line on the table sorter would cause the desired effect but would be incredibly inefficient with a data model that can potentially change at any time. I can put the specific line number and the jdk version if this will help anyone, but I hope that you all will be able to give me an idea of what I might have missed.
  
  Thank you
  
  Dan.

  Hello

  Thanks for the update and the NBS.

  I tested my 'Hammer' solutions in the SOFTWARE, and they work.

  then sorterChanged is true, nothing is being edited so the first block is not entered, then the second block when a method of resizeAndRepaint - that sounds more useful since it seems that repaint correct is missing - is not entered because the event is an UPDATE.

  It reminds me that referred explicitly to the javadoc for setSortsOnUpdate + "by example, if this is true, and that the user modifies an entry the location of this element in the view can change." The default value is false. ' +, so apparently they had mounting in mind and not other consequences, such as filtered lines by changing the number of lines and the line of the table positions.

  The resizeAndRepaint is only call revalidate and which I've tried first JTable #tableChanged repaint (earlier in the call tree) and call revalidate and paint - I don't know how much of the impact that could have on performance.

  Probably the same impact on one than the other methods of Hammer (I don't know paint involves sorting and filtering, which would frustrate the purpose of caching the results of sorting; have you tried and it works?).

  I also notice in the private method DefaultRowSorter.shouldOptimizeChange () , which is called somewhere at the treatment of the update of the line, that the code checks to see if the change is over one-tenth (and Yes, the ten are hardcoded!) lines and doesn't force not re - sorting so this isn't... With the explicit comment 'changed too, sort all this '. I really wonder how much they paid the consequences of updates when sorting/filtering...

  Tables in general should not have more than a few hundred lines, but there are four of them in the client at any time. There are two different branches of data types and two different periods, the tables are for.
  As you say if this does not work, "hammer" approach is all that remains... Thanks for having the eye well.

  Revisit this point: I don't see how you could save a full repaint anyway: If the results of change of model in the first row being filtered, all lines must be repainted (a place), and even a new line can be displayed at the bottom. Yet once if painting involves sort, has no way around sorting in any case, this isn't worth trying to avoid the kind.
  I agree that this should be handled automatically (and I consider a bug because it's not).

  In fact if you fireRowUpdated (i-1, i) (test quick hacky-ish), you will notice that the two rows are properly painted and shift, but not the rest of the table (which should be moved to the top line). This is clearly a bug, it seems that the JTable only redraws the line range in the case of the update, not taking into account that changes of impluies new kind other indices of line outside this range.

  * In short: rowupdated in the presence of a sorter/filter should involve the use/filtering and if necessary to repaint, of the whole table. and this should be in the stock of JDK, not imposed the application code to find

  Published by: jduprez on June 29, 2011 13:23

• Help: Cannot resolve a multiname unambiguous reference.

  I get the following error in my code:

  Can not resolve a multiname reference unambiguously. mx.controls:Button (from C:\Program Files\Adobe\Adobe Flash Builder 4\sdks\4.1.0\frameworks\libs\framework.swc(mx.controls:Button)) and spark.components:Button (from C:\Program Files\Adobe\Adobe Flash Builder 4\sdks\4.1.0\frameworks\libs\spark.swc(spark.components:Button)) are available.    Resource: ArcGIS.mxml    Path: /ArcGIS/src    Location: Unknown    Type: Flex Problem

  I'm new to Flex and am trying to learn how to program. I have, however, seem to agree with Murphy as I always have a bug more. This is all just in my code when I added a routing with function of obstacles to enforcement. I narrowed down it to where I think the problem is, but I don't know how to fix it. Where I have narrowed it down to is in bold.

  <?xml version="1.0" encoding="utf-8"?>
  <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                 xmlns:s="library://ns.adobe.com/flex/spark"
                 xmlns:esri="http://www.esri.com/2008/ags"
                 xmlns:mx="library://ns.adobe.com/flex/mx"
                 initialize="initApp()"               
                 pageTitle="Austin Peay State University">
  
      <s:layout>
          <s:VerticalLayout paddingBottom="10"
                            paddingLeft="10"
                            paddingRight="10"
                            paddingTop="10"/>
      </s:layout>    
      
      <fx:Script>
          <![CDATA[
              import com.esri.ags.Graphic;
              import com.esri.ags.events.FindEvent;
              import com.esri.ags.geometry.Extent;
              import com.esri.ags.tasks.supportClasses.FindResult;
              import com.esri.ags.utils.GraphicUtil;            
              import com.esri.ags.geometry.MapPoint;
              import com.esri.ags.layers.TiledMapServiceLayer;
              import com.esri.ags.tools.NavigationTool;
              import com.esri.ags.FeatureSet;
              import com.esri.ags.events.MapMouseEvent;
              import com.esri.ags.events.RouteEvent;
              import com.esri.ags.symbols.CompositeSymbol;
              import com.esri.ags.symbols.TextSymbol;
              import com.esri.ags.tasks.supportClasses.RouteResult;
              
              import mx.events.FlexEvent;                
              import mx.logging.LogEventLevel;
              import mx.collections.ArrayCollection;
              import mx.controls.Alert;
              import mx.rpc.events.FaultEvent;
              
              import spark.events.IndexChangeEvent;
              
              [Bindable]private var stops:FeatureSet = new FeatureSet([]);
              [Bindable]private var barriers:FeatureSet = new FeatureSet([]);            
              [Bindable]private var selectedBtn:Button;            
              [Bindable]private var lastRoute:Graphic;
                          
              private function layerShowHandler(event:FlexEvent):void
              {
                  var tiledLayer:TiledMapServiceLayer = event.target as TiledMapServiceLayer;
                  myMap.lods = tiledLayer.tileInfo.lods;
              }
              
              private function tbb_changeHandler(event:IndexChangeEvent):void
              {
                  switch (tbb.selectedItem)
                  {
                      case "Zoom In":
                      {
                          navTool.activate(NavigationTool.ZOOM_IN);
                          break;
                      }
                      case "Zoom Out":
                      {
                          navTool.activate(NavigationTool.ZOOM_OUT);
                          break;
                      }
                      case "Pan":
                      {
                          navTool.activate(NavigationTool.PAN);
                          break;
                      }
                      default:
                      {
                          navTool.deactivate();
                          break;
                      }
                  }
              }
              
              private function doFind():void
              {
                  findTask.execute(myFindParams);
              }
              
              private function executeCompleteHandler(event:FindEvent):void
              {
                  myGraphicsLayer.clear();
                  
  //                resultSummary.text = "Found " + event.findResults.length + " results.";
                  myGraphicsLayer.symbol = sfsFind;
                  
                  var resultCount:int = event.findResults.length;
                  
                  if (resultCount == 0)
                  {
                      Alert.show("No buildings found. Please change your search.");
                  }
                  else
                  {
                      // add feature as graphic to graphics layer
                      for (var i:int = 0; i < resultCount; i++)
                      {
                          var graphic:Graphic = FindResult(event.findResults[i]).feature;
                          graphic.toolTip = event.findResults[i].foundFieldName + ": " + event.findResults[i].value;
                          myGraphicsLayer.add(graphic);
                      }
                      
                      // zoom to extent of all features
                      var graphicProvider:ArrayCollection = myGraphicsLayer.graphicProvider as ArrayCollection;
                      var graphicsExtent:Extent = GraphicUtil.getGraphicsExtent(graphicProvider.toArray());
                      myMap.extent = graphicsExtent.expand(3.1); // zoom out a little
                  }
              }
              
              private function initApp():void
              {
                  selectedBtn = addStopsBtn;
              }
              
              private function mapClickHandler(event:MapMouseEvent):void
              {
                  if (selectedBtn == addStopsBtn)
                  {
                      var stopSymbol:CompositeSymbol = new CompositeSymbol();
                      var circleSym:SimpleMarkerSymbol = new SimpleMarkerSymbol(SimpleMarkerSymbol.STYLE_CIRCLE, 20, 0x000099);
                      var textSym:TextSymbol = new TextSymbol(String(stops.features.length + 1));
                      textSym.textFormat = new TextFormat("Verdana", null, null, true);
                      textSym.color = 0xFFFFFF;
                      stopSymbol.symbols = [ circleSym, textSym ];
                      var stop:Graphic = new Graphic(event.mapPoint, stopSymbol);
                      inputsLayer.add(stop);
                      stops.features.push(stop);
                  }
                  else
                  {
                      var barrier:Graphic = new Graphic(event.mapPoint, barrierSymbol);
                      inputsLayer.add(barrier);
                      barriers.features.push(barrier);
                  }
                  
                  if (stops.features.length > 1)
                  {
                      routeTask.solve(routeParams);
                  }
              }
              
              private function solveCompleteHandler(event:RouteEvent):void
              {
                  var routeResult:RouteResult = event.routeSolveResult.routeResults[0];
                  lastRoute = routeResult.route;
                  lastRoute.toolTip = routeResult.routeName;
                  if (routeResult.route.attributes.Total_Time)
                  {
                      lastRoute.toolTip += " in " + Math.round(Number(routeResult.route.attributes.Total_Time)) + " minutes.";
                  }
              }
              
              private function faultHandler(event:FaultEvent):void
              {
                  Alert.show(event.fault.faultString + "\n\n" + event.fault.faultDetail, "Routing Error " + event.fault.faultCode);
                  // remove last stop (or both stops if only two)
                  if (stops.features.length <= 2)
                  {
                      inputsLayer.clear();
                      stops = new FeatureSet([]);
                  }
                  else
                  {
                      inputsLayer.remove(stops.features.pop());
                  }
              }            
          ]]>
      </fx:Script>
      
      <fx:Declarations>    
          <esri:Extent id="initialExtent" xmin="-9724772" ymin="4374071" xmax="-9723613" ymax="4374822">
              <esri:SpatialReference wkid="102100"/>
          </esri:Extent>
          <esri:NavigationTool id="navTool" map="{myMap}"/>
          
          <mx:TraceTarget includeCategory="true"
                          includeLevel="true"
                          includeTime="true"
                          level="{LogEventLevel.DEBUG}"/>
          
          <!-- Symbol for Find Result as Polygon -->
          <esri:SimpleFillSymbol id="sfsFind" alpha="0.7"/>
          
          <!-- Find Task -->
          <esri:FindTask id="findTask"
                         executeComplete="executeCompleteHandler(event)"
                         url="http://peaymapper.apsu.edu/arcgis/rest/services/APSU"/>
          
          <esri:FindParameters id="myFindParams"
                               contains="true"
                               layerIds="[2]"
                               outSpatialReference="{myMap.spatialReference}"
                               returnGeometry="true"
                               searchFields="[BUILDING_N]"
                               searchText="{fText.text}"/>
          <esri:RouteTask id="routeTask"
                          concurrency="last"
                          fault="faultHandler(event)"
                          requestTimeout="30"
                          showBusyCursor="true"
                          solveComplete="solveCompleteHandler(event)"
                          url="http://tasks.arcgisonline.com/ArcGIS/rest/services/NetworkAnalysis/ESRI_Route_NA/NAServer/Route"/>
          
          <esri:RouteParameters id="routeParams"
                                outSpatialReference="{myMap.spatialReference}"
                                pointBarriers="{barriers}"
                                stops="{stops}"/>
          
          <esri:SimpleMarkerSymbol id="barrierSymbol2"
                                   color="0xFF0000"
                                   size="15"
                                   style="x">
              <esri:SimpleLineSymbol width="4"/>
          </esri:SimpleMarkerSymbol>
          
          <esri:PictureMarkerSymbol id="barrierSymbol" source="http://help.arcgis.com/en/webapi/flex/samples/assets/road-closed-32x32.png"/>
          
          <esri:SimpleLineSymbol id="routeSymbol"
                                 width="5"
                                 alpha="0.6"
                                 color="0x000099"/>        
      </fx:Declarations>
      
      <mx:Panel title="Austin Peay State University" width="100%" height="100%">
          <mx:HDividedBox width="100%" height="100%">
              <mx:TabNavigator width="30%" height="100%">
                  <s:NavigatorContent label="Controls" width="100%" height="100%">
                      <mx:Accordion x="0" y="0" width="100%" height="100%">
                          <s:NavigatorContent label="Navigation" width="100%" height="100%">
                              <s:ButtonBar id="tbb" change="tbb_changeHandler(event)" x="0" y="20">
                                  <s:ArrayList>
                                      <fx:String>Zoom In</fx:String>
                                      <fx:String>Zoom Out</fx:String>
                                      <fx:String>Pan</fx:String>
                                  </s:ArrayList>
                              </s:ButtonBar>
                              <s:Button click="navTool.zoomToFullExtent()" label="Full Extent" x="183" y="40"/>    
                              <s:ButtonBar id="bb"
                                           requireSelection="true" x="0" y="0">
                                  <s:dataProvider>
                                      <s:ArrayList>
                                          <fx:String>Service</fx:String>
                                          <fx:String>Streets</fx:String>
                                          <fx:String>U.S. Topo</fx:String>
                                          <fx:String>Imagery</fx:String>
                                      </s:ArrayList>
                                  </s:dataProvider>
                              </s:ButtonBar>                            
                              <s:Button click="navTool.zoomToPrevExtent()"
                                        enabled="{!navTool.isFirstExtent}"
                                        label="Previous Extent" x="0" y="40"/>
                              <s:Button click="navTool.zoomToNextExtent()"
                                        enabled="{!navTool.isLastExtent}"
                                        label="Next Extent" x="104" y="40"/>
                          </s:NavigatorContent>
                          <s:NavigatorContent label="Routing" width="100%" height="100%">
                              <mx:Button id="addStopsBtn"
                                         click="selectedBtn = addStopsBtn"
                                         label="Add Stops"
                                         selected="{selectedBtn == addStopsBtn}" x="0" y="0"/>
                              <mx:Button id="addBarriersBtn"
                                         click="selectedBtn = addBarriersBtn"
                                         label="Add Barriers"
                                         selected="{selectedBtn == addBarriersBtn}" x="0" y="20"/>
                              <mx:Button label="Clear" x="0" y="40">
                                  <mx:click>
                                      <![CDATA[
                                      stops = new FeatureSet([]);
                                      barriers = new FeatureSet([]);
                                      lastRoute = new Graphic;
                                      inputsLayer.clear();
                                      ]]>
                                  </mx:click>
                              </mx:Button>
                          </s:NavigatorContent>                        
                      </mx:Accordion>    
                  </s:NavigatorContent>
                  <s:NavigatorContent label="Find" width="100%" height="100%">
                      <mx:HBox x="0" y="0">    
                          <s:TextInput id="fText"
                              enter="doFind()"
                              maxWidth="400"
                              text="Enter Text..."/>
                          <s:Button click="doFind()" label="Find"/>        
                      </mx:HBox>
                      <mx:DataGrid width="100%" height="40%"
                                   dataProvider="{findTask.executeLastResult}" x="0" y="31">
                          <mx:columns>
                              <mx:DataGridColumn width="70"
                                                 dataField="layerId"
                                                 headerText="Layer ID"/>
                              <mx:DataGridColumn dataField="layerName" headerText="Layer Name"/>
                              <mx:DataGridColumn dataField="foundFieldName" headerText="Field Name"/>
                              <mx:DataGridColumn dataField="value" headerText="Field Value"/>
                          </mx:columns>
                      </mx:DataGrid>
                  </s:NavigatorContent>                
                  <s:NavigatorContent label="Legend" width="100%" height="100%">
                  </s:NavigatorContent>
              </mx:TabNavigator>
              <mx:VDividedBox width="100%" height="100%">
                  <esri:Map id="myMap"
                            extent="{initialExtent}"
                            level="16" height="100%" y="439" width="100%" x="585"
                            mapClick="mapClickHandler(event)"
                            openHandCursorVisible="false">
                      <esri:ArcGISDynamicMapServiceLayer show="layerShowHandler(event)"
                                                       url="http://peaymapper.apsu.edu/arcgis/rest/services/APSU/networkwalking/MapServer"
                                                       visible="{bb.selectedIndex == 0}"/>                    
                      <esri:ArcGISDynamicMapServiceLayer show="layerShowHandler(event)"
                                                       url="http://server.arcgisonline.com/ArcGIS/rest/services/World_Street_Map/MapServer"
                                                       visible="{bb.selectedIndex == 1}"/>
                      <esri:ArcGISDynamicMapServiceLayer show="layerShowHandler(event)"
                                                       url="http://server.arcgisonline.com/ArcGIS/rest/services/USA_Topo_Maps/MapServer"
                                                       visible="{bb.selectedIndex == 2}"/>
                      <esri:ArcGISDynamicMapServiceLayer show="layerShowHandler(event)"
                                                       url="http://server.arcgisonline.com/ArcGIS/rest/services/World_Imagery/MapServer"
                                                       visible="{bb.selectedIndex == 3}"/>
                      <esri:GraphicsLayer id="myGraphicsLayer"/>
                      <esri:GraphicsLayer graphicProvider="{lastRoute}" symbol="{routeSymbol}"/>
                      <esri:GraphicsLayer id="inputsLayer"/>                    
                  </esri:Map>
              </mx:VDividedBox>
          </mx:HDividedBox>
      </mx:Panel>
  </s:Application>

  Can someone help a newbie to flex? xD it would be good if you could help me to understand the problem, how to solve the problem and how to avoid it. I want to repair my programming, Yes, but I would also like to learn.

  Thank you!

  If you want to be a MX button, the code would look like:

  private var selectedBtn:mx.controls.Button

• Master Deatil - data (attribute set to 550 to Deptno in AppModule.EmpEOVO2 invalid precision/scale a) entry

  Hello

  Created according to schema Scott

  (1) EMP - EO

  (2) Dept - EO

  (3) Dept-Emp-Assocaication

  (4) EMPEOVO

  DeptEOVO 5)

  (6) Dept-EMP-VL (see link)

  (7) especially VO of presentations to the Module of the Application

  (7) with the Groovy Expression to obtain the values of the primary key for the EMP and Dept

  I have now that I drag and drop the DeptVo (ViewLink)

  as well as the Emp VO

  Drag Drop the CreateInsert on the page for the Dept and EMP

  After clicking on Dept - CreateInsert entered the Date, now I want to make the CreateInsert on Emp line, now I am faced with the question (set of attributes whose value 550 to Deptno in AppModule.EmpEOVO2 has precision/scale not valid)

  Thanks adavance

  Venkatn

  Have you checked the data type of the attribute pk in the emp table?

  What is a number type? If this isn't the case, you will need to return to the groovy case expression.

  Timo

• Maximum number of dimensions Possible in Cube of BSO attribute

  Hello
  
  I have two simple questions:
  
  1 - What are the maximum number of dimensions Possible attribute in a Cube of BSO.
  2-how good attribute dimension can be associated with only one basic Dimension.
  
  We hope to get answer soon.
  Thanks in advance.
  
  Concerning
  Anubhav

  No limits are defined as such:
  How many Maximum number of Dimensions can create?

  Even in the Ser60, it says "many":

  A base dimension member can have many attributes, but that one attribute of each dimension of the attribute.

  See you soon...
  Rahul S.

• Get the precision of an EOImpl attribute

  Hello world.
  
  Is there a way to recover the precision (length) of an EO of the relevant EOIMpl.java attribute programmatically?

  Yes, you can use the EntityDef object for this

  EO.getDefinitionObject().getAttributeDef(INDEX_OF_ATTRIBUTE).getPrecision();
  

  Timo

• What is the maximum number of carrots that I can attribute to a RHEL guest?

  What is the maximum number of carrots that I can attribute to a RHEL guest? We have a data center by telling us that they can not affect more than 4 cores in the guest OS, even if the guest OS is reliever of suposto the entire physical host (IE, it's the only host on the ESX node).

  We have 16 cores on the physical machine, and they tell us, that we can not have more than 4 in total in a single instance of comments.

  4vCPU per guest is max

  http://www.VMware.com/PDF/vi3_35/esx_3/r35u2/vi3_35_25_u2_config_max.PDF

• How to set the precision for the ViewObject type attribute 'number '.

  Hi, I have a reading that only SQL based VO that I'm showing on the Page of the user interface.
  
  I have a number attribute data type that has a value of 6.000001 in the DB Table, but his watch has 6 in the user interface.
  Please help me with instructions to set the precision of the VO object attribute.
  
  
  Thank you
  TK

  on the page where you deleted the attribute, expand the attribute in the Structure window... you should find af:convertNumber attached to this attribute.
  Click on af:convertNumber and go to the property window
  Set MaxFractionDigit = "Scale" (looks 6 in your case)

  Amit

• Maximum camera Presets supported for SX80 precision 60

  Hello community,

  How many presets camera on SX80, we can create using the precision camera 60?

  SX80 version TC7.3.2.

  Thank you.

  According to the Guide of API TC7.3 SX80is 35.

  xCommand Camera Preset Store

• Total of column for attribute BigDecimal - precision adjustment

  Hello

  I'm the total column in the column for an attribute BigDecimal foot. In the foot of the column, I see the value as 10356345.15000000037252902984619140625.

  How can I do this to show as 10356345.15?

  JDev - 11.1.2.3

  The attribute that allows you to calculate the total has a suspicion ui tab where you can specify a format, or add you the module format directly on the attribute in the page.

  Timo