PREFORM VS VS A TIME NEW FORM INSTANCE QUERY PRE... That you choose?

Similar Questions

• Webutil-problem (not usual 'PREFORM', ' one TIME-NEW-FORM-INSTANCE ' etc..)

  Hello
  
  We have an application with many modules, where we use webutil to create text files on the client for the export of data. Export is called in a trigger WHEN-BUTTON-PRESSED and usually works well, but we have the following problem:
  
  If two modules, where webutil is used, are open at the same time and a single module is closed, webutil does no more work in the other module. If we then try to create a text file after the closure of the module, we get the following error message:
  
  Bean Oracle.forms.webutil.file.FileFunctions not found.
  WEBUTIL. FILE. FILE_SELECTION_DIALOG_INT will not work.
  
  It is not only the FileFunctions bean, all other webutil functions do not work as more in the remaining module.
  
  It's not usual 'PREFORM', ' one TIME-NEW-FORM-INSTANCE ' etc. Webutil-problem.
  As I said before, webutil works, but when we close a module with webutil used, it does not work in another open module more.
  
  Any idea, why this happens and how to solve the problem?
  
  Kind regards
  Udo

  I tried what I understood to be what you do, but I'm confused and see at least two problems:

  1. you said that you use CALL_FORM to open subsequent forms and GO_FORM to move between them. You also said:

  -Module A calls Unit B (with attached webutil) and webutil works in module B

  -GO_FORM (module A) and webutil still works (while module B is always open) >

  If you "dial" form B, you will not be able to return to form A, until the B form is closed. So I guess I don't understand what you are doing or your explanation is not clear.

  2 assuming that what you do is a valid way to move from shape to shape, try adding the following to default.env

  DE_VARIABLESHARE = 1

• Call run in trigger a TIME NEW FORM INSTANCE

  When I load my form I have to hit EXECUTE to load the data.
  
  How can I do this when the form is loaded? Is there a trigger in a TIMES-NEW-FORM-INSTANCE?

  user12877415 wrote:
  When I load my form I have to hit EXECUTE to load the data.

  You can use the built-in forms procedure called EXECUTE_QUERY;. Before using this course when meke you load your forms and then where the cusfor goes first. If it goes to your desired block just this procedure will not work. Otherwise you must focus the cussor to this block, then you code should look like this...

  -- in case if cursor focus anyother block.
  GO_BLOCK('BLOCK_NAME');
  EXECUTE_QUERY;
  
  -- otherwise...
  EXECUTE_QUERY;
  
  *simply add this code in WHEN-NEW-FORM-INSTANCE trigger.*
  

  -Clément

• How to uncheck all the boxes option trigger a TIME NEW FORM INSTANCE

  Hello
  
  I have a group (RDBTNGRP) of radio with three radio buttons (RDBTN1, RDBTN2, RDBTN3) in a control block, I uncheck all these three buttons in the code.
  
  
  
  Any help please.
  
  Kind regards

  Hello

  I don't think you can get by using code or the property to unselect all option buttons.
  One possibility is to create an additional option button in the Group and the value of any value for this. Let's say you have two radio buttons in a radio group, and now you have created a radio button more in the same group. And set the value as ABC. Now, go to the property of the new created radio button and set the X Position, Y Position, width , and height to zero (0). And set the initial value of this group of ABC radio (new created radio button). So it will look like when running, not selected all the option boxes. And when recording, you can check if the radio button selected your criteria or not.

  -Clément

• Execute_query in a time new point instance

  Hello
  Forms6i.
  
  I have a block of data, HLP_REGN_MASTER, having areas, such as HRM_ID, HRM_NAME, HRM_DEPT etc...
  So when I enter a value in HRM_ID and move to HRM_NAME, I have to execute_query for this block with the HRM_ID value, the user entered value
  Thus, in a times-news-point-instance HRM_NAME, Ive wrote

  if :HRM_ID is not null then
                 SET_BLOCK_PROPERTY('HLP_REGN_MASTER',DEFAULT_WHERE,'HRM_ID='||:HRM_ID);
       EXECUTE_QUERY;
       msg_alert('Query Hits '||get_block_property('HLP_REGN_MASTER',query_hits),'I',FALSE);
  end if;

  But it prints the request hit as 0, and so he does not fill in the other fields.
  But I have values for the HRM_ID is entered in the table.
  What's wrong?
  
  Thank you

  The thing you try is quite unusual and lead barely. How do you decide if the user enters new data or if the need to run a query?

  (edition, was already correct.)

  You could issue a CLEAR_BLOCK (NO_VALIDATE) prior to the EXECUTE_QUERY, for forms Treaty entry HRM_ID that the entry of a new record.

  Published by: Andreas Weiden on 08.08.2010 15:37

• A TIMES-NEWS-SHAPE-INSTANCE in ADF

  Hi all
  I went thought this document which is for me very useful (http://www.orastudy.com/oradoc/selfstu/fusion/web.1111/b31974/appendix_mostcommon.htm), but I couldn't find some triggers. I wanted to know the equivalent of WHEN-NEW-FORM-INSTANCE in ADF, or that the code is executed before or when the page loads?
  
  Thank you.

  Hello

  Do the links below help you?

  http://vtkrishn.WordPress.com/2010/03/28/how-to-invoke-method-before-the-page-loads-in-ADF/
  http://kohlivikram.blogspot.com/2008/10/call-method-on-page-load-in-ADF.html

  ~ Abhijit

• How to discover the field that has been activated in a time-new-record-instance

  Suppose that: a block several record. The user is positioned on a record existing on the land has
  
  Action: the user clicks on blank (new) record field B
  
  Question: How can I discoverer was clicked on field B in the times-news-record-instance? Already tried: system.current_item and: system.trigger_item. They both contain "field.
  
  Published by: user473811 on August 26, 2010 04:56

  Hello

  For the new record of recording/empty if the user tries to access any field, then cursor won't allow access this field. It will go to the first field in this block navigation or you use any variable as trigger_item/current_item system, etc. You can test when you click on any field cursor will go with force to the first field of navigation of this block. So in the case you always it will return A FIELD, which is correct. If the cursor remains on the field, then it will return this the name field that you can test for all previous records by accessing any field at random.

  -Clément

• a times-news-record-instance

  Hi all!
  
  I have a form, where in

  *Trigger:when new form instance*
  enter_query;

   *Block level Trigger :when-new-record-instance*
  
  :empaply.employeeid:=:global.employeeid;
  select employee_id,firstname into :empaply.employeeid,:empaply.employeename
  from pim_emplpersonalinfo where employee_id =:global.employeeid; 
  
  if :empaply.leavetype='Casual Leave' then
  :empaply.status1:='Not Applicable';
  :empaply.status2:='Not Applicable';
  :empaply.status:='Pending Approval';
  elsif :empaply.leavetype='Earn Leave' then
  :empaply.status1:='Pending Approval';
  :empaply.status2:='Pending Approval';
  :empaply.status:='Pending Approval';
  elsif :empaply.leavetype='Earn Leave' and :empaply.status='Rejected' then
  :empaply.status1:='Not Applicable';
  :empaply.status2:='Not Applicable';
  elsif :empaply.leavetype='Earn Leave' and :empaply.status1='Rejected' then
  :empaply.status2:='Not Applicable';
  end if;

  And to a push button

  *Trigger: when button pressed*
  execute_query;

  Now my question is the initial value, that I put in the new instance of the recording does not work automatically, it works when I click on any other area of text in my form or when I scroll down...
  
  I can down to fix this?
  
  Pls help!
  
  Thanks and greetings
  user 10685325
  
  Published by: user10685325 on June 22, 2009 01:19

  Hai,

  The NEW-RECORD-INSTANCE trigger only works when the cursor moves to that record.

  write in the trigger after REQUEST of the block.

  Kind regards

  Manu.

  If this answer is useful or appropriate, please mark. Thank you.

• Diff b/w need ONCE - NEW - POINT - INSTANCE AND a TIMES-NEWS-RECORD-INSTANCE.

  Dear friends,
  
  I started to learn the Forms apps recently,.
  This im unable to get the difference between ONCE - NEW - ITEM - INSTANCE & WHEN-NEW-FOLDER-FORUM...
  
  Please someone help me this confution. (if possible, for example).
  
  
  
  Best regards
  Subrahmanyam P
  Technical consultant.

  WNRI means whenever you insert the new record (total of items or the items in a folder) or modifies the previous Records, then it will be fire.

  But WNII means whenever you can insert the new value into the fields or change any values in the fields already existing at that time it will be fire

  Concerning
  Ranga

• A TIME NEWS BLOCK INSTANCE

  Execute_Query (No_ValiDATE);
  clear_message;
  ----------------------
  
  I don't want display no_data_found message on execution of the
  TIMES-NEWS-BLOCK-BODY relaxation, if no record exists in the table.
  
  Kind regards
  
  Abdetu...

  You do not need to do this, you have a very simple solution.

  Use you the form-MESSAGE level and filter messages with the: SYSTEM. TRIGGER_BLOCK, in this way you will be show/hide a message about a specific block or the use of the relaxation WE MESSAGE block that fires only for this block of level.

  Level code MESSAGE form:

  BEGIN
  
    IF MESSAGE_TYPE = 'FRM' AND MESSAGE_CODE = 40301 AND :SYSTEM.TRIGGER_BLOCK = 'EMP' THEN
      NULL;
    ELSE
      MESSAGE(MESSAGE_TYPE||'-'||MESSAGE_CODE||': '||MESSAGE_TEXT);
    END IF;
  
  END;
  

  Block level code-MESSAGE:

  BEGIN
  
    IF MESSAGE_TYPE = 'FRM' AND MESSAGE_CODE = 40301 THEN
      NULL;
    ELSE
      MESSAGE(MESSAGE_TYPE||'-'||MESSAGE_CODE||': '||MESSAGE_TEXT);
    END IF;
  
  END;
  

  Try it, it's fun

  Tony

• How to add a new document type to those that you can create by right-clicking on the desktop window or fodler?

  When you right-click on the desktop or the window displaying the contents of a folder and select 'New', you see a list of the types of documents you can create. How to add and delete?

  When you right-click on the desktop or the window displaying the contents of a folder and select 'New', you see a list of the types of documents you can create. How to add and delete?

  With regedit , you can see a lot of extensions of files known, for example, HKEY_CLASSES_ROOT\.txt for txtfile.   To get rid of the "new extension" option in all of the folders that you can rename the key HKCR\.txt\ShellNew to HKCR\.txt\ShellNew.disabled or similar.

  Some applications can open empty files, for example, Notepad can open a (new) empty text file.  For the purposes of C:\windows\shellnew which is indicated by an empty string (REGSZ) NullFile.
   

• as a new form instance in forms10g revalent to adf.

  experts,
  
  It's my need:
  
  I had tree link to the left if I hit it means jsff (dynamic region) opens on the right side.
  
  While opens jsff I want to run my vo.
  
  something like executequery
  
  
  so I have to say,
  
  what I did:
  
  put a few a jsff entered. After finishing entries switch in an another jsff. the data are not make refreshing. If I update means url the vo get updated.
  
  why I want to run vo means that certain data are not refreshing. If I remove a part of the url means get refreshed the vo.
  
  I did nt know how to use executequery onpageload...
  
  If anyone can help.
  
  -jdev11.1.1.5.0
  
  Published by: subu123 on May 8, 2012 22:45

  I don't understand why you can't use the method call as the default activity?
  There will be a case of control flow of the method call you visualize activity which means after the execution of the VO, the page will be displayed.

  Please have a read to clarify your bases-
  http://docs.Oracle.com/CD/E21764_01/Web.1111/b31974/taskflows_activities.htm#BACFBDAE

• New to Illustrator CS4 - how do you choose the Arc tool to draw the Arcs?

  PDF on Illustrator does not indicate how to select the Arc tool. Excerpt from toe following pdf:

  Draw arcs
  1. Select the Arc tool.  (HELP - I CAN'T LOCATE THE ARC TOOL).
  2. do one of the following:
  • Position the pointer where you want the arc to start, drag to the location where you bow at the end.
  • Click where you want the arc to start. In the dialog box, click a square on the reference point locator to determine the point where the arc is drawn. Set one of the following options, and then click OK.
  Length x axis
  Specifies the width of the arc.

  Y axis length
  Specifies the height of the arch.
  Type
  Specifies whether you want the object to be an open path or a closed path.
  Base along
  Specifies the direction of the CRA. Choose the x-axis or the y-axis, depending on whether you want to draw the base of the arc along the horizontal (x) axis or vertical axis (y).
  Slope
  Specifies the direction of the slope of the electric arc. Enter a negative value for a concave slope (inward). Enter a positive value for a convex slope (outwards). A slope of 0 creates a straight line.
  Fill Arc
  Fills the arc with the current fill color.
  Note: To display a dynamic overview of the CRA that you set options, double-click the arc tool in the tools Panel.

  There is the online tool that's one out of the following menu is also the CRA under the tool text tool.

• display time in form 6i

  Hi all
  
  work on form 6i
  
  I want to display a time on my canvas. It must display the time...
  
  How can I?
  
  Please help me...
  
  Thank you

  You can create a timer on a TIME-NEW-FORM-INSTANCE with an interval of 1 second and on WHEN-TIMER-EXPIRED you can set the time to a piece of text on your Web Forms.

  WHEN-NEW-FORM-INSTANCE
  
  DECLARE
   timer_id Timer;
   one_sec NUMBER(5) := 1000;
  BEGIN
    timer_id := CREATE_TIMER('emp_timer', one_sec, REPEAT);
  END;
  

  And then the trigger TIME-CLOCK-arrival at EXPIRATION, you can do it like this:

    :YourBlock.YourItem := to_char(sysdate, 'HH24:MI:SS');
    SYNCHRONIZE;
  

  I hope that helps!

• Create a new form using template.fmb part 2

  Hi dear friends
  
  I create a new custom form for EBS and I followed the docs, I should start with the template.fmb. I tried to create new blocks and remove some of the blocks pre-created. There are 4 blocks pre-created in the TEMPLATE.fmb. They are CALENDAR, BLOCKNAME, PROGRESS_INDICATOR, DETAILBLOCK, I was able to remove BLOCKNAME and DETAILBLOCK but I can not delete CALENDAR and PROGRESS_INDICATOR. When I delete these 2 blocks, I got error:
  
  FRM-15110: cannot remove PROGRESS_INDICATOR because it belongs to a group of objects that are subclassed.
  
  How to remove or disable these blocks please...
  
  Thank you very much
  
  MsK

  The default order in which forms of exhibition items is assigned the order in which items appear in the Forms object browser. If you have added your new data blocks after blocks by default to the template.fmb in the node browser data blocks, the first navigable element in the first block of data registered will appear when you run your form. The simplest solution is to move the block of data to display as a default at the top of the node of the data blocks is the first block in the list. As a matter of habit, I always moved by default blocks of the template.fmb to the bottom of the list of data blocks. You can change this default behavior of the forms by calling the built-ins Go_Block or Go_Item in your trigger a times-new-form-Instance, but I prefer the first option because it doesn't require any code and it is the default functionality of the forms.

  I hope this helps.
  Craig...

  If a response is appropriate or useful, please mark accordingly