A TIMES-NEWS-SHAPE-INSTANCE in ADF

Similar Questions

• Webutil-problem (not usual 'PREFORM', ' one TIME-NEW-FORM-INSTANCE ' etc..)

  Hello
  
  We have an application with many modules, where we use webutil to create text files on the client for the export of data. Export is called in a trigger WHEN-BUTTON-PRESSED and usually works well, but we have the following problem:
  
  If two modules, where webutil is used, are open at the same time and a single module is closed, webutil does no more work in the other module. If we then try to create a text file after the closure of the module, we get the following error message:
  
  Bean Oracle.forms.webutil.file.FileFunctions not found.
  WEBUTIL. FILE. FILE_SELECTION_DIALOG_INT will not work.
  
  It is not only the FileFunctions bean, all other webutil functions do not work as more in the remaining module.
  
  It's not usual 'PREFORM', ' one TIME-NEW-FORM-INSTANCE ' etc. Webutil-problem.
  As I said before, webutil works, but when we close a module with webutil used, it does not work in another open module more.
  
  Any idea, why this happens and how to solve the problem?
  
  Kind regards
  Udo

  I tried what I understood to be what you do, but I'm confused and see at least two problems:

  1. you said that you use CALL_FORM to open subsequent forms and GO_FORM to move between them. You also said:

  -Module A calls Unit B (with attached webutil) and webutil works in module B

  -GO_FORM (module A) and webutil still works (while module B is always open) >

  If you "dial" form B, you will not be able to return to form A, until the B form is closed. So I guess I don't understand what you are doing or your explanation is not clear.

  2 assuming that what you do is a valid way to move from shape to shape, try adding the following to default.env

  DE_VARIABLESHARE = 1

• PREFORM VS VS A TIME NEW FORM INSTANCE QUERY PRE... That you choose?

  Hello
  
  His general question, not a duplicate to my previous post...
  
  
  PREFORM VS PRE-REQUETE:
  
  What will be exactly preform will fire? In a screenplay where the user enter a field as entry, based on this child on the same form will block gets its data... If, in this scenario IS PRE FORM IS SOLUTION FEASIBLE?... can we do where manipulations of the article here...
  
  PreQuery:
  
  where do cluase manipulation here. and loop on... I heard that loop in unauthorized prior request and we cannot use next record kind of stuff.
  
  
  PREFORM VS WHEN the NEW INSTANCE of the FORM, which is the better place to put the code for deformity overiding dynmically run query based on the values of some queryable form field...
  
  Thank you
  Prasanth

  PREFORM fires once at the start of forms before you navigate to the first item/block.
  A TIME-NEW-FORM-INSTANCE trigger once after the PREFORM before you navigate to the first item/block.
  QUESTION them fires each time before any request on a block. It is the right place to manipulate the default where the runtime.

• How to discover the field that has been activated in a time-new-record-instance

  Suppose that: a block several record. The user is positioned on a record existing on the land has
  
  Action: the user clicks on blank (new) record field B
  
  Question: How can I discoverer was clicked on field B in the times-news-record-instance? Already tried: system.current_item and: system.trigger_item. They both contain "field.
  
  Published by: user473811 on August 26, 2010 04:56

  Hello

  For the new record of recording/empty if the user tries to access any field, then cursor won't allow access this field. It will go to the first field in this block navigation or you use any variable as trigger_item/current_item system, etc. You can test when you click on any field cursor will go with force to the first field of navigation of this block. So in the case you always it will return A FIELD, which is correct. If the cursor remains on the field, then it will return this the name field that you can test for all previous records by accessing any field at random.

  -Clément

• Execute_query in a time new point instance

  Hello
  Forms6i.
  
  I have a block of data, HLP_REGN_MASTER, having areas, such as HRM_ID, HRM_NAME, HRM_DEPT etc...
  So when I enter a value in HRM_ID and move to HRM_NAME, I have to execute_query for this block with the HRM_ID value, the user entered value
  Thus, in a times-news-point-instance HRM_NAME, Ive wrote

  if :HRM_ID is not null then
                 SET_BLOCK_PROPERTY('HLP_REGN_MASTER',DEFAULT_WHERE,'HRM_ID='||:HRM_ID);
       EXECUTE_QUERY;
       msg_alert('Query Hits '||get_block_property('HLP_REGN_MASTER',query_hits),'I',FALSE);
  end if;

  But it prints the request hit as 0, and so he does not fill in the other fields.
  But I have values for the HRM_ID is entered in the table.
  What's wrong?
  
  Thank you

  The thing you try is quite unusual and lead barely. How do you decide if the user enters new data or if the need to run a query?

  (edition, was already correct.)

  You could issue a CLEAR_BLOCK (NO_VALIDATE) prior to the EXECUTE_QUERY, for forms Treaty entry HRM_ID that the entry of a new record.

  Published by: Andreas Weiden on 08.08.2010 15:37

• Call run in trigger a TIME NEW FORM INSTANCE

  When I load my form I have to hit EXECUTE to load the data.
  
  How can I do this when the form is loaded? Is there a trigger in a TIMES-NEW-FORM-INSTANCE?

  user12877415 wrote:
  When I load my form I have to hit EXECUTE to load the data.

  You can use the built-in forms procedure called EXECUTE_QUERY;. Before using this course when meke you load your forms and then where the cusfor goes first. If it goes to your desired block just this procedure will not work. Otherwise you must focus the cussor to this block, then you code should look like this...

  -- in case if cursor focus anyother block.
  GO_BLOCK('BLOCK_NAME');
  EXECUTE_QUERY;
  
  -- otherwise...
  EXECUTE_QUERY;
  
  *simply add this code in WHEN-NEW-FORM-INSTANCE trigger.*
  

  -Clément

• Diff b/w need ONCE - NEW - POINT - INSTANCE AND a TIMES-NEWS-RECORD-INSTANCE.

  Dear friends,
  
  I started to learn the Forms apps recently,.
  This im unable to get the difference between ONCE - NEW - ITEM - INSTANCE & WHEN-NEW-FOLDER-FORUM...
  
  Please someone help me this confution. (if possible, for example).
  
  
  
  Best regards
  Subrahmanyam P
  Technical consultant.

  WNRI means whenever you insert the new record (total of items or the items in a folder) or modifies the previous Records, then it will be fire.

  But WNII means whenever you can insert the new value into the fields or change any values in the fields already existing at that time it will be fire

  Concerning
  Ranga

• a times-news-record-instance

  Hi all!
  
  I have a form, where in

  *Trigger:when new form instance*
  enter_query;

   *Block level Trigger :when-new-record-instance*
  
  :empaply.employeeid:=:global.employeeid;
  select employee_id,firstname into :empaply.employeeid,:empaply.employeename
  from pim_emplpersonalinfo where employee_id =:global.employeeid; 
  
  if :empaply.leavetype='Casual Leave' then
  :empaply.status1:='Not Applicable';
  :empaply.status2:='Not Applicable';
  :empaply.status:='Pending Approval';
  elsif :empaply.leavetype='Earn Leave' then
  :empaply.status1:='Pending Approval';
  :empaply.status2:='Pending Approval';
  :empaply.status:='Pending Approval';
  elsif :empaply.leavetype='Earn Leave' and :empaply.status='Rejected' then
  :empaply.status1:='Not Applicable';
  :empaply.status2:='Not Applicable';
  elsif :empaply.leavetype='Earn Leave' and :empaply.status1='Rejected' then
  :empaply.status2:='Not Applicable';
  end if;

  And to a push button

  *Trigger: when button pressed*
  execute_query;

  Now my question is the initial value, that I put in the new instance of the recording does not work automatically, it works when I click on any other area of text in my form or when I scroll down...
  
  I can down to fix this?
  
  Pls help!
  
  Thanks and greetings
  user 10685325
  
  Published by: user10685325 on June 22, 2009 01:19

  Hai,

  The NEW-RECORD-INSTANCE trigger only works when the cursor moves to that record.

  write in the trigger after REQUEST of the block.

  Kind regards

  Manu.

  If this answer is useful or appropriate, please mark. Thank you.

• A TIME NEWS BLOCK INSTANCE

  Execute_Query (No_ValiDATE);
  clear_message;
  ----------------------
  
  I don't want display no_data_found message on execution of the
  TIMES-NEWS-BLOCK-BODY relaxation, if no record exists in the table.
  
  Kind regards
  
  Abdetu...

  You do not need to do this, you have a very simple solution.

  Use you the form-MESSAGE level and filter messages with the: SYSTEM. TRIGGER_BLOCK, in this way you will be show/hide a message about a specific block or the use of the relaxation WE MESSAGE block that fires only for this block of level.

  Level code MESSAGE form:

  BEGIN
  
    IF MESSAGE_TYPE = 'FRM' AND MESSAGE_CODE = 40301 AND :SYSTEM.TRIGGER_BLOCK = 'EMP' THEN
      NULL;
    ELSE
      MESSAGE(MESSAGE_TYPE||'-'||MESSAGE_CODE||': '||MESSAGE_TEXT);
    END IF;
  
  END;
  

  Block level code-MESSAGE:

  BEGIN
  
    IF MESSAGE_TYPE = 'FRM' AND MESSAGE_CODE = 40301 THEN
      NULL;
    ELSE
      MESSAGE(MESSAGE_TYPE||'-'||MESSAGE_CODE||': '||MESSAGE_TEXT);
    END IF;
  
  END;
  

  Try it, it's fun

  Tony

• How to uncheck all the boxes option trigger a TIME NEW FORM INSTANCE

  Hello
  
  I have a group (RDBTNGRP) of radio with three radio buttons (RDBTN1, RDBTN2, RDBTN3) in a control block, I uncheck all these three buttons in the code.
  
  
  
  Any help please.
  
  Kind regards

  Hello

  I don't think you can get by using code or the property to unselect all option buttons.
  One possibility is to create an additional option button in the Group and the value of any value for this. Let's say you have two radio buttons in a radio group, and now you have created a radio button more in the same group. And set the value as ABC. Now, go to the property of the new created radio button and set the X Position, Y Position, width , and height to zero (0). And set the initial value of this group of ABC radio (new created radio button). So it will look like when running, not selected all the option boxes. And when recording, you can check if the radio button selected your criteria or not.

  -Clément

• Commit_form creating problem with shutter release once - new - Record - Instance

  Hello friends,

  I use Oracle forms 6i. I have a block of multiple data. I wrote commit_form in a times-news-record-instance of the data block. When I run the form on my instance the form does not open.

  But when I comment on this code, the form opens to the instance. What could be the problem?

  Also is it a condition that I can specify if the block of the data set is null when I open the form?

  Hello...

  In When-new-folder-Instance, check if the lock status is NEW. If not, then just apply COMMIT_FORM;

  Try this code in your trigger

  IF: SYSTEM. BLOCK_STATUS = 'CHANGE '.

  THEN

  COMMIT_FORM;

  END IF;

  Should work for you.

  Thank you...

• Why addChild (new Shape()) does not work?

  I would like to know why the following code does not work:
  
  < mx:Application >
  ..
  private function doShape (): void {}
  var aShape:Shape = new Shape();
  this.addChild (aShape);
  }
  ..
  < mx:Button click = "doShape ()" / > "
  < / mx:Application >
  
  According to the docs, addChild() takes a DisplayObject instance as a parameter. The shape is a DisplayObject. However, I get an error (#1034) that the form cannot be converted to mx.core.IUIComponent
  
  I don't understand what the problem...

  Yes, it's always a witch hunt in a first time. Flex containers (for example, canvas, Panel, etc) may have only UIComponents and children, not only of DisplayObject. The thing is, one UIComponent can have simple DisplayObjects as children, so you have to wrap your form:

  var temp: UIComponent = new UIComponent();
  temp.addChild (aShape);
  this.addChild (temp);

• How can I stop my police in failed mail at the time new Roman apple sent emails

  How can I stop my police in failed mail at the time new Roman apple sent emails

  Mail > Preferences > fonts and colours

  

  .

• Times New Roman 11 point shrunken feel justified with HP UPD PCL 5 results in characters

  Since the duty switch to the driver for HP (PCL 5) universal print several months ago, when we made the jump to Windows 7 (it seem not to be any specific device Windows 7 x 64 drivers for most HP printers) that we had a very specific problem with printing documents (especially from Word 2010).

  When we print a document that has the Times New Roman 11 point police, and that the document is fully justified, the output will of characters that are "crushed" together in different places on the pages.  For example, the 'l' and the 'e' in 'legally' in part of a page could be printed too close, almost on top of the other, while the same Word may appear later in the page and end.

  This strange behavior output is consistent when the document is printed several times with different HP printers (all using the UPD PCL 5).  In other words, the shriveled characters will appear in the same place on the same pages of any printer send us the task to (we have printers ranging from an old 4050N and a whole new m602) or how many times it is printed.

  Since one of our departments has literally thousands of legal documents that use Times New Roman 11 point fully justified, it's a pretty big deal.  For the moment, we have been print these documents to a photocopier to avoid the HP UPD question, but this isn't a permanent solution.  I need to know how to solve this problem for HP printers so we can print documents we have where we need.

  I should mention that I've already updated printer drivers network (Windows 2008 R2) to the last UPD PCL 5 (July 2014).

  I have some ideas on this issue.

  First of all, for more general printing Office such as from Word and other applications of MS Office, you will get the best combination of performance and print quality using the PCL6 driver.   Unless you have a legacy application that requires PCL5, I would recommend moving to PCL6.

  Second, when you moved to the HP UPD did you create new print queues or to update an existing queue by using the new driver option on the Advanced tab of the driver?    When you use the pilot 'new' option, Windows did his best to keep the old queue settings and put them on the new pilot.   This may cause missing, additional incorrect registry entries, corrupt or simply on the queue.      I always recommend to create new print queues when changing drivers.   If you have a large number of print queues that must be deleted and recreated, I suggest you try the AutoUpgradeUPD.exe utility from administrator print Resource Kit (PARK) at www.hp.com/go/upd.     For more information about this utility, see http://youtu.be/mYCVx1RBp9w

  Finally, some Microsoft Office applications save some driver with the file information.   I see this more often with Excel, but I guess that Word may depend on as well.   The problem is that the application passes data from the former driver for the new driver and it can create unexpected results.    To see if this is the case, open the print dialog box, and then click on printer properties to open the user interface for the driver.   It is enough to click OK to close the window and the driver information will be updated in the Word document.    Now, click on print and see if the output is improved.   If Word prompts you to save your changes when you close the document (and you make changes) that's a clue that the driver information has been updated in the .doc file.

• The vi below opens a new data file every time new data of the visa arrived. I only want a single file of data for registration period!

  The vi below opens a new data file every time new data of the visa arrived. I only want a single file of data for registration period!

  Can someone bring me (Labview is new to me) in the right direction?

  John

  See attached the amendment. I made a change to my suggestions and possess the top-level VI for the null refnum. See if it makes sense.