Premiere Pro random Pan and Zoom with video

Similar Questions

• First elements vs Pro for Pan and Zoom Photo Slide Shows

  I'm a professional architectural photographer. I need to create videos using a series of photos, and I need the ability to pan and zoom to specific parts of each photo.  I need to be able to tell the software where to pan and to and where to zoom in or out.  For example, I could start on the left side of a picture, pan to the left side of the photo, then stop panning and zooming.  I need to control the speed of the pan and zoom and control where they occur within each photo.  I won't be dealing with video, only still photos.

  I saw a video showing this capability in Premier Pro.  It can also be done in first elements?

  rvomund

  If please check out Adobe document on this panoramic and Zoom Tool and workspace function

  http://helpx.Adobe.com/premiere-elements/using/Pan-Zoom-create-video-like.html

  There is a difference using this tool for video from still images. And, since you mention that you use some photos, I

  not entered in the pan and zoom applied to the video with this tool.

  Please review and consider. If any questions or need any clarification, do not hesitate to ask.

  Before all decisions, good idea to look at the free 30 day trial of first elements of Adobe to purchase 13.

  RTA

• Pan and Zoom with mailbox

  Is it possible to Pan & Zoom outside the area of the image on a slide show? For example, I still have a shot that was taken on the side so that it is large and skinny (9 x 16 instead of 16 x 9). I want to be held to show the entire image with boxes in black letters on the side. I can't get this to work. Any advice?

  Thank you, Alan

  PE/EP 10

  Instead of use the animation Pan & Zoom Preset, use keyframes, the fixed effect > Motion > scale (Zoom) and movement > Position (Pan).

  It is an example of a portrait based on a still Image in the video landscape Frame. This is very similar to what you want. It has been done in PrPro, but aside from the differences in the GUI, between programs, will be just what you want to do. In my case, I used a background abstract, behind the portrait, Image, where you can just black bands of a pillar box. Also, I kept the size on the title safe area where you'll be scaling of the full vertical dimension of the frame.

  

  Good luck and hope that helps.

  Hunt

  PS - I like the use of a background, abstract, instead of the black bars, but that's just me.

• Pan and zoom to create the video effect

  This question has been posted in response to the following article: http://help.Adobe.com/en_US/premiereelements/using/WSeffff8bffc802084-494411db12fd35452dd-8000.html

  For pans and Zooms with PiP (Picture in Picture), do not use Pan & Zoom. It has other functions and also limits.

  Use rather fixed effects > Motion > scale (Zoom) and the movement > Position (Pan) and the keyframe of their attributes.

  Good luck

  Hunt

• Cannot find "Pan and Zoom" option in LR CC 2015

  I am creating a slideshow of 'automatic' with random pan & zoom (as in the good old days again).  I watched this tutorial: slideshow with music and pan and zoom. Adobe Photoshop Lightroom CC tutorials but do not see the option "pan and zoom" OR manual v. automatic options in the Reading Panel on the right side of the screen.   I can choose manual, so it turns out that auto is the default.  This is different from the Adobe tutorial that I quoted above.  My CC with Lightroom is common to updates.

  Can someone give me an idea how I can create a slideshow with random pan and zoom in LR creative cloud?  Thank you, in advance.  ~ Stuart

  This must be my problem.  I have creative cloud and assumed I was in the CC version - I see now that I was in Photoshop Lightroom 5.7.1.   Thank you for your patience and entries, guys!

• DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. Now, I've added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers, and a stop at 01:29:32:17 (th

  DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. I have now added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers and a cleat to 01:29:32:17 (the end of the film). The combustion is interrupted with a message to watch a C:\Users\ianle_000\Documents\20151206160446.iso file. There is no file. The message also provides a link for an explanation. This Web page is impossible to obtain. I'm running on a PC with Windows 8.1.

  Thank you once again. I burned the DVD!

  It is the first film for which I have reached the stage of burning. I'm not sure why she didn't in the first place. I tried to burn the "no menu" version, but at the time, was shot the DVD itself - I wonder when he reached this point?

  So, I burned the "no menu" version to another DVD, that worked, then the version of menu, with no cleat to a third DVD, which reads perfectly.

  Now that I have a successful routine, I'll stick to it.

  Thanks for all your help.

  I'll close this discussion now.

• Ive been using Premiere Pro, After Effects and Photoshop for a while now with creative cloud, but since I've updated the 2015 After effects version, it is said that it is a trail version? But when I go on the creative menu cloud and look at apps it j

  Ive been using Premiere Pro, After Effects and Photoshop for a while now with creative cloud, but since I've updated the 2015 After effects version, it is said that it is a trail version? But when I go on the creative menu cloud and look at apps it just said up to date, any ideas on this?

  Hello Cam,

  Please check the help below document:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Kind regards

  Sheena

• Slideshow with pan and zoom in InDesign?

  Can you create a slide show that also has a pan and zoom feature. It would be nice to flipp through images and have the option to if possible zoom large images. Or could you do a multi state object is controlled with buttons and add a pan and zoom for images in this way function.

  If one of these options is possible then how do I achiev in InDesign? Or is it possible to make a slideshow with Pan and zoom functions nother? Could it be done with edge animate?

  Max

  Create overlays of pan and zoom and then combine in a MSO. Should be

  work.

  Bob

• Pan and Zoom on Photos in PreEle 11

  I do a combo pic a video project.  I want to give photos the Ken Burns Pan and Zoom effect.  Some of my old photos that I have scanned are causing issues with Pan and Zoom.  When I try to add the effect using pan and zoom in the menu Tools, frameworks cannot me start and end with the complete picture.  I lose easily half of the photo.  I know that I am here at fault, there must be a simple answer.  Any help is appreciated.

  Happy that you have built it, gene.

  Don't forget to mark your question as answered!

  And, if you want to learn more about Photoshop Elements and Premiere Elements, don't forget to check out my 8-part basic training tutorials free for everyone at http://Muvipix.com. (Just type "Basic Training" in the product search box).

  You can find a direct link to the first elements Basic Training tutorials here:

  http://forums.Adobe.com/thread/537685?TSTART=0

• How to pan and zoom of multiple photos in a grid

  Hello

  happy new year to the community!

  Recently, I did a lot of research in this forum and for most of the problems in my project, I was able to find appropriate solutions in PrE 11 that I treated myself buy at Christmas

  But there is always something left: I want to align several rectangular cells in a grid, each containing an image set that is enlivened by some pan and zoom.

  I can't get there through the Pan and zoom tool, since it is limited to the frame ratio and display mode full-screen. Then I tried to use key framing for the pan and zoom and cropping the photos. But the harvest has been scaling as well as photos and just fix. My last hope was to use an alpha mask that would have the advantage that I could create a fixed grid. But the mask was affected by both animation...

  I suspect, after reading the post http://forums.Adobe.com/thread/996581 , that's not possible without creating intermediate video files for all the photos. So my question is if there's a way to accomplish the task or if it is confirmed that the intermediate videos are the only way.

  Kind regards

  phylome

  The only way I know to do this in Premiere Elements is to create your pan & zoom for each image and then exit each using publish & share/computer/AVI with DV preseeding.

  Once you have created all of them, put each on its own separate video track, stacked on top of each other, sizing and positioning of each to adapt to your grid.

• How must better panning and zoom like a real camera

  I took a bunch of 4K videos I want to pan and zoom.  When I use the key to pan and zoom image it always comes out a sort of jerky and evil.  Anyway to make it smooth as actually moving a camera?

  are there other tools that help with that?

  Here is what I get, not so good...

  Tammy during his lesson of surfing in Santa Cruz - YouTube

  One way to smooth out the pan and zoom is to have keyframes begins and ends before and after the element appears on the timeline.  This way, the clip is already in motion when it appears and it's always moving when is disappears.

  If there is a transition, be sure that the keyframes are before and after the handles.  If a few cuts, as some images before and after are OK.

• Premiere Pro is mess up my audio/video synchronization. Use Handbrake really the only solution for this problem?

  Premiere Pro is mess up my audio/video synchronization for the images that I downloaded from my iPhone 6 s + (.) MOV files). The files play fine, but once that I put them in Premiere Pro, the audio falls slowly behind the video, probably to cause "variable frame rate." phone I've seen other threads where people had the same problem, and the universal response, I saw was freeware download called 'Handbrake' to convert the frame rate of variable to fixed... but is not sit right with me.

  Uses 3rd party freeware really the only solution for this problem? Video editing software Adobe Professional-grade not really have the ability to solve this problem? If so, what should I do to prevent all Premiere Pro ruin all my pictures to import?

  Hi Christafarian,

  Premiere Pro is mess up my audio/video synchronization for the images that I downloaded from my iPhone 6 s + (.) MOV files).

  You wouldn't be the first. I'm sorry.

  The files play fine, but once that I put them in Premiere Pro, the audio falls slowly behind the video, probably to cause "variable frame rate." the phone

  I found:

  • If you pull the iPhone in a well-lit environment, it records at a constant speed.
  • In lighting challenged environments, you get images image variable rate.

  I've seen other threads where people had the same problem, and the universal response, I saw was freeware download called 'Handbrake' to convert the frame rate of variable to fixed... but is not sit right with me.

  For this project, you're probably stuck with transcoding with Handbrake or another method not Adobe. Our coders simply do not handle variable frame rates.

  Uses 3rd party freeware really the only solution for this problem?

  With Premiere Pro and this project, you have no other choice. For future projects, look into purchasing a high end video camera application where you can shoot at a constant rate regardless of the stage lighting.

  Video editing software Adobe Professional-grade not really have the ability to solve this problem? If so, what should I do to prevent all Premiere Pro ruin all my pictures to import?

  If you like Premiere Pro to support variable frame rates, please create a feature request. Otherwise, I hope my tips will help you in the future.

  Thank you
  Kevin

• Pan and zoom

  I need pan in on a topic in a video and hold it there for several minutes - say five or ten years.  I can pan to ok, but it dissolves and returns to the entire video in a few seconds.  Rookie here. Pls help.

  clydeealan

  The Pan and the panoramic Zoom tool and the zoom are not the same for still and video images.

  The preview of what you want to do...

  Menu/Pan and Zoom tools

  Pan and zoom Open Workspace

  What you see in the sandbox are the first and the last frame of the video clip. You will apply the zoom in this case between the first and the last of the video images.

  1 make sure that the first thumbnail is selected (first scene of the video). Green border around it.

  2. move timeline indicator in the tray right a few video images, click on the new framework in the Panel to the left of the workspace to pan and Zoom.

  You will see a box on the screen 2. Move this box to the face that you want to zoom in on and the size of the box accordingly.

  3. move indicator chronology of the tray right a few fews more, click on the new framework in the Panel to the left of the workspace to pan and Zoom.

  You will see a box on the screen 3. Move this box to the face that you want to zoom in on and the size of the box accordingly.

  4. move timeline marker from the bin to the right, some new framework again, click in the Panel to the left of the workspace to pan and Zoom.

  You will see a box on the screen 4. Move this box to the face that you want to zoom in on and the size of the box accordingly.

  5 and so on, on the duration of the clip.

  If the face is to stay in one place in the whole, you probably can get away with less stops for a new image.

  Don't forget, you can also do this zoom by using keyframes for the scale property of movement. Let us know if you want to go into that under

  Applied effects tab/Applied effects Palette/Motion expanded Panel and its properties of scale and functionality of Animation of the rocker.

  Not exactly what you want to do, but it introduced the concept of application of pan and zoom of Pan and Zoom Tool to video.

  First Elements ATR troubleshooting: ss12 / 12.1: Pan and Zoom Tool and video files

  Please let us know if you're OK with the how. If this isn't the case, I'll be more specific.

  Thank you.

  RTA

• Pan and Zoom for beginners

  I'm reading stories to my students and working on the words at the same time. I read on pan and zoom in C8 here is there a pan and zoom or a smart update option in Captivate 8?

  But unfortunately, he is ahead of my curve. I know that I have to open a project in the demonstration video. But just there, I stopped, because I don't know what are the choices to make.

  

  Does anyone know of a BEGINNER video for pan and zoom, rather than videos that assume you already know how to do this and just focus on the changes between versions of Captivate? I have some info of Beyind the essential Captivate of Kevin Siegal 7.

  But it does not help me understand about that. Let's say I want to zoom to the word was. Then say stuff about it. Then go back to history. What are the right steps to take?

  If there is a method step by step online, I would be delighted if you told me where it is. Thank you!

  

  Hmmm, my answer in the other thread was provided with 8 Captivate HD video demo application.  It was a response, not a tutorial, I assume nothing, just talked about this alternative. The screenshot that you have is for a normal software simulation, using slides. I've never used panning during a software simulation of recording at all. My first question would be: do you need interactivity in this "movie"? If this isn't the case, you can try the demo video (is available in the Welcome screen, third icon in the first row). There is not many tutorials autour, it seems that very few people use it. I have published two films created with the demo video, you could have a peek at one to check if this is what you want to do:

  Action vs standard single

  You will see some pan and zoom in this film. Advantage over the Pan in a simulation software in the course of the capture, is that in demo the pan and zoom can be applied later during editing in the dedicated video editor. And the quality is much better, since it is HD and non-destructive.

  If you want to stay with the simulation of software (maybe because you need interactivity), I would never pan when entering, but in different regions, and for Zoom capture have sufficient quality, create separate images and apply effects to it. A combination of slides in demo with normal slides is another possibility.

  Now you will tell me that I'm not offering you links tutorial, as I said there are very few around and most of them is very limited (take a look on Youtube, some are ridiculously simple). After all, Camtasia offers more HD video demo in Captivate you and may be easier to use (not Adobe, purchase separately).

• CP7 Pan and Zoom not available button

  One of my colleagues made a video demo and for some reason that we can not pan and Zoom button to animate.  I tried to check the yellow bars and even moving them inside the recorded area and the button are animate.

  He worked for him earlier but it isn't now.

  There are mice would be visible points on the timeline that interfere with the Pan and Zoom?  We tried to selecting an area where they are not points of the mouse, but it has not yet activated.

  Thank you

  Susan

  No, which is also logical: the resolution of the video must stay the same, the width/height ratio must remain.

  You can mark thread as answered?