Presario cq57: device drivers

Similar Questions

• Compaq presario cq57-439wm: drivers

  After replacing a crashed hard drive, I can't access the internet. I get a message saying no drivers for my internet connection. any help woud greatly appreciated. Thank you, well being, peace.     Dale

  For the controller PCI\VEN_1814 & SUBSYS1636103C & REV_00 network would be the last of them listed in the message of REO51ST

  sp56942.exe

  For the PCI PCI\VEN_10EC & SUBSYS1636103C & REV_00 device which is the second in the post of REO51ST

  sp53663.exe

• the search for drivers for a compaq presario cq57-339wm pci

  I'm looking for drivers for a compaq presario cq57-339wm pci. I have no internet and were in section hp driver and can't find it. someone would be so kind as to send me to the right place.  Thanks in advance Lewis

  You are the very welcome.

  You need this driver for the controller of communication simple pci:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-101536-1&CC=US&DLC=en&LC=en&os=4063&Product=5111985&sw_lang=

• need CONTROLLER of BUS SM driver for Compaq Presario CQ57-339WM

  Hello Forums HP!

  I would really appreciate if someone can help me with this problem.

  I have a Compaq Presario CQ57-339WM

  Hard drive has failed and replaced. Installed Windows 7 64.

  I found all the drivers here, excpet for the integrated graphics chipset.

  I get the yellow question mark for "SM BUS CONTROLLER"

  I tried the Chipset and graphics drivers on HP, but none works.

  Chipset

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-98379-1&cc=us&DLC=en&LC=en&...

  Graphics, I tried & Intel AMD

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-98379-1&cc=us&DLC=en&LC=en&...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116435-1&cc=us&DLC=en&LC=en...

  I also watched upward the processor and the graphic information on this page:

  http://support.HP.com/us-en/document/c02522280

  went to Intel page for drivers and none worked.

  Heres directX Info:

  Intel Celeron CPU 1.5 ghz B800

  Intel HD Graphics Family

  Hello:

  You don't need the Intel chipset driver to install the smbus controller.  You may need to install it manually.

  Give this one a try... auto install.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20019

  Manual installation if auto installation does not work...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20018

  Download and unzip the file.

  Go to Device Manager and click the controller smbus needing drivers.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

• CQ57-425ER: Compaq Presario CQ57 does support UEFI?

  I have Compaq Presario CQ57-425ER and you want to use Windows 8.1 GPT disk. I made a bootable USB key with Rufus (TPG-UEFI chosen option), but my laptop can not boot from the flash drive. There is a message - no boot device. Among the drivers for my laptop, I found an environment to help HP Unified Extensible Firmware Interface (UEFI).  Here is a description: ftp://ftp.hp.com/pub/softpaq/sp55001-55500/sp55477.html. I found 2 interesting points in this description: supports GPT disks and provides support for the installation of the UEFI System Partition. I tried to run this flash with windows on another laptop and it works fine. But in my laptop, I always get the message that there is no bootable media. Yes, there is a support of UEFI in CQ57? And if so, what should I do?

  Hello

  This model of PC has limited support for Windows 8/8.1.  It does not support the GPT or UEFI 2.3.1 or later version.  It is the MBR only.

  -wes

• How to boot from USB-drive on Compaq Presario CQ57 400SO

  Hello!

  I have a Compaq Presario CQ57-400SO I want to install Windows XP instead of Windows 7, which is included. I had two questions now since I hit a few bumps.

  1 at - not, at all, driver support for Windows XP to get their hands on?

  2. How am I suppose to boot from USB (my DVD-ROM is broken)?

  + Have converted my installation of Windows XP on USB disk.

  -J' have tried to change the boot order, and no, the USB is not marked with! so it should work.

  -J' tried by pressing F9, that gets me the Boot Option menu. But once I press the USB it goes right to the Windows (the pre-installed).

  Thank you in advance.

  Kind regards

  Robin

  Hi @kvartsnorsk

  Welcome to the Forums of HP Support!

  I know that you are looking for drivers for Windows XP, unfortunately, this laptop was not sold configured for this OS. Drivers are available for windows 7 and 8 (32 and 64 bit)

  What happens if I do not see my operating system?

  On the boot USB device, it is likely that your bootable usb image isn't UEFI, so you should enable legacy boot in the BIOS to allow boot off this device.

  UEFI and the Start Menu

  The Legacy Boot mode - NeoSmart Knowledgebase

• Need to "downgrade" my Compaq Presario CQ57 of Windows 8

  A few weeks ago, I upgraded my Presario CQ57 to Windows 8.  Well, I don't like her, and I now have a desktop computer that is anyway a touchscreen that works beautifully.  I thought about my computer limited knowledge that I had created the backup disks to restore my system to Windows 7 Home Premium, but it turns out it's a repair disc.

  Is it possible for me to order the right from HP disk to return my laptop for Windows 7?  I found something on the internet with this post: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-e-g/The-Cleanest-Install-Windows-7-Recovery-D...

  I don't know what to do.  Any help would be appreciated!  Thank you!

  Hello:

  Please read the info on the link below to see how to order for your PC recovery disc:

  http://support.HP.com/us-en/document/bph07143

  I believe that my instructions are easy to follow to make your own install of W7 media, if you do more like that.

  You can also make your own regular install of W7 disc and allows to reinstall windows 7 If you can read the product key 25 character microsoft on the COA sticker on the case of the PC. You will have none of the programs supplied with the PC using this method, however.

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Compaq Presario CQ57: bios error 501

  What should I do to get rid of this problem?  Please help me someone.

  Welcome to the community of HP @ANAKONDA support,

  Thank you for joining on the HP's Support Forums! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support.

  I wanted to join you and help! I understand that you have a problem with an APPLICATION (501) BIOS ERROR on your Compaq Presario CQ57 laptop PC.

  Remove all USB devices. Disconnect all non-essential devices, because they can cause some problems.

  Try starting your laptop normally after having disconnected all. If that does not solve the problem, please continue with troubleshooting.

  The next step would be for you to try to restore the BIOS. You will see that the document says:

  If the BIOS of your laptop becomes corrupted, and a failure to upgrade the BIOS or damage caused by a virus, the computer can display all the following symptoms:

  • The computer displays the error message from the BIOS APPLICATION ERROR 501.

  After restoring the BIOS see if you can start the computer normally.

  Thank you for your participation in the Forums of HP where we want to help you as well as others who may encounter a similar problem that you have. Remember to mark this message as an acceptable Solution if it solves the problem for you.

  To show recognition for my efforts please click the Thumbs Up below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

  Have a wonderful day!

• Presario CQ57 wifi does not illuminate

  My Presario CQ57 (Windows 7 w / APU AMD E - 300 w/Radeon HD graphics) crashed and close the other night. Something to do with the graphics card, I think. in any case, when I had shot upwards, my wifi would not come. When I push the button wifi (f12 key), it doesn't do anything, and I can't find my adapter wireless in my Device Manager list. Any help would be appreciated. Thank you.

  Hello

  You have a few options in my opinion please try these steps can help you solve your problem.

  (1) try to do a system restore to the date where unit was working fine.

  (2) Please update the Bios driver & wireless from the HP website.

  (3) If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

• Cannot install my printer (hpdeskjetf4580) on my new computer laptop compaq presario cq57

  Original title: I am trying to install my printer (hpdeskjetf4580) on my new computer laptop compaq presario cq57 and work willnot installation disk and I downloaded all the driver and Assistant I can find

  am trying to install my printer (hpdeskjetf4580) on my new compaq presario laptop computer cq57 and installation disc don't work and I downloaded all the driver and Assistant I can find and it still does not load. It will download and then extract but then nothing and I went to the file downloads and this is, but when I try to run it it extracts and then nothing again.

  Hello

  • What happens when you try to install the drivers?
  • You receive an error message?
  • What version of the Windows operating system do you use?
  You can try to check and clean the boot, if the problem persists, I suggest to install the software in the clean boot state and see if it works.

  To see how to perform the clean boot, click the link below.

  http://support.Microsoft.com/kb/929135

  Warning: After using the boot is a way to solve your problem followStep 7 to reset the computer to start as usual.

  You also try to run the configuration file after extraction of the files is complete from the location where extracted files were kept.

• missing coprocessor and base system device drivers SM bus controller

  Hello

  I recently formatted my notebook compaq presario v3749au without the recovery disks, because my cd drive does not work. When I saw in the Device Manager, it says that 'sm bus controller, coprocessor and base system device' drivers are missing. I don't know where to put them because these drivers are not available on the hp site. so kindly respond if anyone knows how to find the solution.

  Thank you

  Hello:

  Here are links to the drivers you need...

  This should install it the first 2.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-53361-1&cc=us&DLC=en&LC=en&OS=2093&product=3560053&sw_lang=

  For the 1180

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-55937-1&cc=us&DLC=en&LC=en&OS=2093&product=3672886&sw_lang=

• Compaq Presario CQ57-339WM: Compaq Presario CQ57-339WM randomly fails to start

  I had a very strange problem with my Compaq Presario CQ57-339WM laptop. My laptop suddenly, carefully and randomly last night, didn't start the operating system. It's all the way to the start screen, but who could not pass.

  Safe mode wouldn't work, nor any attempt to use System Repair, so I was forced to use the Recovery Manager to reload the operating system.

  Given that what happened at least three times before, I honestly don't know what is the cause. It may be a virus, because I take care of is not to infect the computer and the hard disk is reformatted every time that the OS is reloaded, and I'm sure he doesn't have to do with any other software, including the operating system. No matter who would be able to help me with this rather strange dilemma I had some?

  NOTE 1: This has also happened at random intervals completely - the last time it happened was several months ago, and you the shortest time between the issues around a few days.

  NOTE 2: This computer has had its fair share of abuse - he struck from time to time and is quite old at this point.

  SYSTEM card (in which case it might be useful):

  CPU: Intel Celeron 1.50 GHz B800

  RAM: 4.00 Go DDR3-1600 (upgrade; also the problems until I installed RAM)

  : HARD disk SATA 5400 RPM 320 GB (?) (not upgraded)

  BIOS: update to the latest version (F.39, if I'm not mistaken; questions had also arisen before that the BIOS has been updated)

  Have implemented so many devices (monitor, mouse, printer, speakers)

  Defective HARD drive probably just, who is giving up

• Compaq Presario CQ57: Factory settings

  Hello

  First of all, I know that there are a few other topics around this topic, but I just need to be sure... it's just me I gues. So I want to reset my laptop to factory settings so it will run a little better, because sometimes it just would be nice if he would go a little faster. I use my pc mainly to watch movies and series (not a problem this part), but when I need for school he could just use some extra.

  Buy a new, and perhaps even better, the laptop is an option, but why would I be if I have not yet tried this? So I got everything I need to have on a USB key. My laptop is a Compaq Presario CQ57. If you do not need more information you will get it! However, I know that I have to press F9 when I turn on the laptop.

  But my big question is: the laptop will always have windows after the reset? And do I need a CD or my serial code or some sort of code for windows? Because it would not be to have a laptop without windows or I have to pay for it.

  Thx for your time. And sorry for my English, if you have had problems to understand me.

  Hello:

  Please read this guide on how to reset the hard drive of your laptop to its original "out of the box" condition.

  http://support.HP.com/us-en/document/c01867418

  Make sure that you back up the files that you do not want to lose on a portable storage device, as the performing a system recovery will erase all data on the hard drive before the start of the recovery.

  The recovery will reinstall Windows and all the software that originally came with your laptop.

  You shouldn't have the Windows product key for this procedure.

• WiFi lan driver for compaq presario cq57-408tu

  WiFi lan driver for compaq presario cq57-408tu

  It would help greatly wrote the operating system and the type (32-bit or 64-bit).

  The drivers for your laptop are located here.

  It's actually easier to install the driver from the Recovery Manager created by the program of building your computer laptop recovery disk or the original Recovery Manager Windows. The drivers to this recovery Manager are those corresponding to your laptop, so no guessing is necessary.

  

  

  

• The fan on a Compaq Presario CQ57 Windows laptop settings

  Hello, I have a Compaq Presario CQ57 and the fan runs all the time at full speed. I opened the laptop and did a fan and cleaning of the motherboard, I applied thermal paste, I changed in the bios the option #Fan always on # Enable to disable, I updated the Bios but still nothing... it sounds like a jet of fighter.should I change my fan? someone who has a Council?

  I already ordered the fan and I will keep you posted as soon as I get it and install it.
  Thank you very much