Presario cq61-430sv: upgrade the presario cq61-430sv with intel qx9300

I want to improve my laptop with qx9300 cpu and I want to know if the qx9300 intel is compatible with card mother mt

306A 21.14

I know that the maintenance manual says that the best processor that hp have developed this series of laptops is intel p8700

I don't care the temperature more

My t4400 processor and the qx9300 have the same socket and same chipset

I just want to know if my motherboard is compatible with the new processor and if not why exactly

I bought t9900 and two-processor qx9300 and I tried qx9300 processor does nothing!
But t9900 works well, I'm satisfied with t9900

Tags: Notebooks

Similar Questions

  • is it possible to upgrade the hp mini 3505 with 4 GB of RAM?

    Is it possible to upgrade the hp mini 3505 with 4 GB of RAM?

    If this is the case, what is the spec of the RAM should I buy?

    Taken max memory supported by a Mini unit is 2 GB only. So, you will not be able to upgrade to 4 GB RAM. Optionally, check out a third-party tool to check a compatible memory for your device.
    http://www.crucial.com/systemscanner/
    I hope this helps!

  • Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

    Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

    Check your hosts file.

    help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  • Is it possible to upgrade the Satellite A100-906 with 160 GB 7200 RPM HARD drive

    Hello guys,.

    First of all, I would like to congratulate all the people here for their good advice.
    As for my question, I want to upgrade my HARD drive. I have the laptop A100-906, which has a drive HARD 100 GB 5400 RPM Hitachi.

    The hard drive, I would like to buy, is also Hitachi but with the highest capacity (160 GB) and RPM faster (7200 against 5400).
    I wonder, if my laptop supports this drive and if I have problems with temperature and noise, because the HARD drive runs at 7200 RPM.

    To summarize the above, is it really useful to replace my old 5400 RPM HARD drive to a new 7200 RPM?
    Should I buy a new one with 5400 RPM to avoid having problems of temperature and noise?

    Please let me know your opinion and thank you in advance.
    STL

    Hello

    As you already know we can only speculate on the size of the HARD disk
    In my opinion the 160 GB would be possible. But it s just my personal opinion.

    In any case, the higher speed (7200 RPM) HARD drive should be a problem. I noticed that many laptops use 7200 RPM HDDs and 5200 RPM. So I imagine that the heat produced by the HARD drive shouldn't t increase the level of temperature at a critical level.

    Greetings

  • Is it possible to upgrade the Satellite Pro M70 with a Core 2 Duo CPU?

    I ve got the Toshiba Satellite Pro M70.
    It is with the Intel Centrino 1733 Mhz.
    I want to know if it is possible to update my system with a Core 2 duo.
    STI Centrino (Dothan) 479M CPU base and the core 2 duo is 479 Y.

    Thanks for your replies!
    Sebastian

    Hello

    No, to my knowledge you cannot switch the laptop with Core Duo or Core 2 Duo CPU.
    Laptop Satellite Pro M70 supports a Mobile Intel 915 PM Express chipset and cela only the Intel Pentium M Processors.

  • Upgrading the BIOS on T61 with dead battery

    Can I put the BIOS on my T61 if it has a dead battery?

    I don't know any way to do

  • Satellite R850-18W: replacement of the device map LAN with Intel centrino 6235

    Dear members of the Toshiba forum.
    First of all excuse me for my bad English because my native language is Dutch.

    I recently bought my third Toshiba laptop Satellite A R850-18W.

    I already bought an original adapter replacement for the card Atheros AR9002WB wlan.
    Change the adapter in the notebook is easy, I've done it before.

    The only problem is, I couldn't get the bluetooth works so I put the original Atheros card in my Satellite R850. Everything is working, wifi and bluetooth.

    But I want to buy a router with the possibility of 5 GHz band and take advantage of the speed less sang band of 5 GHz. That's why I bought the Intel centrino card 6235.

    I need help in how to get everything working as it should.

    Should what software I uninstall to avoid problems.
    Do I need to uninstall the drivers for the Atheros card first?

    I think and I hope that it should be possible to make such a minor change in the configuration of this laptop?

    I guess that it is not an easy way, while Toshiba has also laptops were they use the Intel centrino advanced-N card 6235. I was hoping some sort on a driver easy software installation and connection of Toshiba software.

    Hope someone can help me with this.
    Thanks in advance.

    Hello

    Not very good if you will be able to use this Intel Centrino WLan card.
    There is a similar threads on the Intel Centrino Advanced 6230 n and the other user was unable to activate this card
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65338

    That's why I recommend talking to your dealer if it s possible to return this kind of wireless network card if there is a compatibility issue.

  • How can I change the physical address associated with my Airport Extreme

    I moved, but when I look for devices by using find my iPhone devices connected to my Airport Extreme base station seem to be at my old location. How to upgrade the physical address associated with the Airport base station?

    To the best of my knowledge, there is no way for the user to do. Finally, the database of Apple will update. There is some anecdotal evidence of that having an iPhone connect to airport speeds the process.

  • Compaq Presario CQ61-416SA: upgrade the Compaq CQ61 wireless card

    I have a Compaq Presario CQ61-416SA, running 64-bit Windows 7 application. The current wireless card only works on the 2.4 Ghz band and I want to upgrade to a dual band to get the best speed etc. to 5 GHz. I have an Intel Centrino N6230 of replacement card, but the phone will not accept anything other than the default map. At the start, it stops with an error message saying that it will not continue unless the "unauthorized device" is deleted. If I re - install the original wireless card, it starts and works very well, but this is not the point, I would like to update.

    I guess that the default is to lock the part of the BIOS of the laptop to prevent alteration unauthorized with laptop computers under warranty, but mine is well outside the guarantee.

    I know that the card works because I installed it in my laptop previous and I have been in electronics for 30 years and spent about 5 years of this repair of computers laptops, desktops, servers, etc so I'm sure that I am able to connect a card and the driver installation!

    There does anyone know a way around the block? I won't to be able to upgrade the laptop without it.

    Anyone?

    Do not completely blame HP, but it was little 1984 involving your federal Government. HP and Lenovo read a few Federal Communications Comm regs on the recording of radio portable wireless (including the computer wifi cards) to require that alternative cards are blocked. Other laptop makers has not agreed and now the 'white list' is history, but there is no effort to go back and make new BIOS for older models.

    HP wireless card versions have specific identification in the firmware looking for the HP whitelist before clearing the map to use if you use the version of HP. I looked pretty hard for a version of HP of the card and the one I linked is everything I could find. Google around and you can do better.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Presario CQ5320F: upgrade the processor 'not supported CPU.

    I was looking to upgrade the CPU on my Presario CQ5320F, for most popular processors in the list on the HP site for my computer. So I bought one, actually two, of the AMD Phenom II X 4 processors (Deneb). When I installed it, them, I get a message saying that the CPU is not supported. I don't know how I got it done, but it does not work. I bought two of the processors by mistake. The code on the processors that I bought is "HDZ955FBK4DGM", which seems to be the processor in the list of compatible processors on the HP website.

    -AMD Phenom II X 4 9xx/9xxe/8xx Quad-Core (Deneb)

    -AMD Phenom II X 3 Triple-Core (Heka) 7xx/7xxe

    -AMD Phenom II X 2 5xx (Callisto)

    -II AMD Athlon X 4 6xx/6xxe (undactylopodite)

    -AMD Athlon II X 3 4xx/4xxe (Rana)

    -AMD Athlon II X 2 2xx/2xxe (Regor)

    -AMD Sempron 1xx (Sargas)

    I'd appreciate any help.

    Thanks in advance,

    nashville_bill

    Thank you for giving me the answer. I guess it's time to look for a new motherboard now.

    No doubt, it would be nice if someone let HP know this, so people like me would not try to use this processor with the motherboard.

  • I have an old Presario SR1909UK is still possible to upgrade the processor and if so with what?

    I have an old Presario SR1909UK is still possible to upgrade the processor and if so with what?

    AM2 are listed here:

    http://support.HP.com/us-en/document/c00714578

  • Compaq Presario SR5710F upgrade the video upon hearing the motherboard cannot handle high power supp

    What is the best graphics card upgrade which can my Compaq Presario SR5710F can support? I'm ready to upgrade the power also, but hear that the motherboard do not put anything above 350 watts regardless of power.

    You can install any PCIe x 16 video card you want. The limiting factor is going to be the power supply. More power the longer video card POWER supply. About what you hear about the motherboard, I found nothing to that effect. To qoute request-leo,' I heard a matter of concern that a power high power can somehow 'forcing' the power on the computer, resulting in overheating and burnout. Nothing could be further from the truth. A power supply provides power in response to the need; It does not matter where power grow. If your computer only needs 100 watts, then a 500 Watt power supply will only provide 100 watts. Why have a 500 Watt power supply? For the use of 'pic' (sometimes material will require 'sudden' power, as at the beginning upward or under heavy load) and for future expansion. »

    It is better to have too much power too littleand to get the right size. By that I mean the physical size - come in many standard sizes out there, and they are not interchangeable.

    Frank

  • upgrade the hard drive on Presario 17XL365

    Inherited this machine recently and I was wondering if I can upgrade the hard drive.  He got a Hitachi DK23BA-15 which is ATA - 66.  But I read that the chipset of the motherboard will be ' interface with ATA/66 hard drives in UDMA 2 mode "-a description of the site intel (North 82443BX/South 82371EB).  Intel® 440BX AGPset.

    So my question is, any laptop drive ide or eide will work with this?  Or I need to find a player who is specificially ATA-66.  Any info on the momentum and the size limitations would also be appreciated.

    Thanks in advance!

    It's a record of 4200 RPM 15 gigabytes. You can use any portable player of up to 120 gig eide, but not anymore. Anyway, you would benefit from a rotational speed of 5400 RPM which is what you can find in the market these days, but will not improve your ATA - 66 maximum transfer speed. The most recent ATA - 100 or 133 readers interfacera just at the speed of 66 but faster speed of rotation of the drive will always access same time help lower transfer speed if that makes sense.

    The number of ATA - 66 is just the maximum theoretical speed, which you reach rarely, in any case.

  • CQ60 419wm: upgrade the card mother CQ60-419wm

    Hello, new to the site. Quite inexperienced with laptops as well. But I managed to do the RAM that follows - updated (2x4gb), upgrade hdd to ssd and put at level 42 sempron processor to the zx-84(updated bios) Turion. All work fine, but I have a question or two if someone has the time and knowledge please answer...
    1. is it possible to use the 8 GB of ram?
    2 part number for a mobo that has hdmi (my case has the detachable part). Original mobo is the 303

    Please do not hesitate to ask additional information required to get answers

    I understand, sometimes it's really hard the project without detailed each party images

    The best thing to do is to compare the details of parts with a computer using factory motherboard 498460-001 (HDMI), you will notice that the form that are different, for example the basis

    CQ60-419WM

    http://PartSurfer.HP.com/search.aspx?SearchText=NV243UA

    COMPAQ PRESARIO CQ60-419AU

    http://PartSurfer.HP.com/search.aspx?SearchText=VW548PA

    496825 001Basic wardrobe - for the model with modem data / integrated fax and function HDMI
    IS NO LONGER INCLUDED

  • Presario R3000 / model #PP2210 (Intel) RAM (memory addition)

    I am trying to add RAM to my Compaq Presario R3000 / model pp2210 (intel Celeron).

    It is currently drafted that I have 1.18 GB of RAM. The manual says I can go to 2 GB RAM max. In the slot (accessible on the bottom of the computer) back already has a card of 1 GB in there.

    Where can I find the additional location and how for it to add extra RAM?

    The other location memory is under the keyboard and it seems that there is a module of 256 meg in this niche. Here is the replacement of manual high memory with photos:

    high memory

Maybe you are looking for