Presario SR5152NX: Looking for AMD Motherboard BIOS update for Presario SR5152NX

Similar Questions

• HP Pavilion Elite HPE - 400z CTO: H - RS880 - Μatx Motherboard BIOS Update caused crash, to see a black screen now?

  I have a desktop HP Pavilion Elite HPE-400z running Windows 7 (64), my computer was working fine, however I thought that I needed to update the drivers and things from the HP website.

  The first thing I installed was the following: H - RS880 - Μatx Motherboard BIOS Update

  That restarted immediately frozen mouse on a black screen. When I turn on the computer the lights and the fan turns on but the screen remains black. Their is nothing wrong with the monitor, it's light is on, but when turn light it just says: "monitor going to sleep".

  I went through these troubleshooting pages: http://support.hp.com/us-en/product/HP-Pavilion-Elite-HPE-Desktop-PC-series/4269972/model/4300925/do...

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-400-desktop-PC-series/4269972/document/BPH...

  without success.

  Any other suggestions of what I could do to fix this?

  Hello

  Disconnect the PC and press and hold power for 30 seconds. Remove and replace the battery CMOS. It's a $4 item. Now let's see what happens. If no joy, then try the steps above once again.

  If your PC support has been changed or modified then put it back in its original state.

• Napa-GL8E Motherboard BIOS update problems

  Hi, I have a Pavilion Elite m927a and Sunday, this update of the Napa-GL8E motherboard BIOS wanted to install. I did, and then all the computer froze. I was like, oops. so I forced it closed (power button which took place) and rebooted, and the same update arrived. I though maybe if I get rid of the process would lead, it does not freeze? so I forced it shut again, and the entire computer is dead. Would not boot the computer and emitted a beep code in groups of two, given that the BIOS was not happy (couldn't get the MESSAGE). So, I would have reset the BIOS myself, ' cept that I just bought a month ago, and I didn't kill my warranty, so I called HP and got a technician of po as a side note, it took over an hour for a person pick up, and I've been waiting very unfortunately. Anyway, the Grinch came to a fixed rate (I don't know what he did I wasn't there), but it doesn't have me talk about the update, and now, she wants to always be updated the update even that caused all the trouble.

  My question is this; What should I do about it? I'm too scared to run it again in fear of having to w8 for a technician again.

  Ty! ^^

  Do not install it.

  Word to the wise, do not install an update of the BIOS, unless you have a problem or you need something like a new game or software.

  This hp article should help you remove the element of updates (especially the last two sections):

  http://support.HP.com/us-en/document/c01124811

• M2N78 - THE motherboard BIOS update (version 5.20)

  I received an alert from HP about the above, but when I click on the link in the email, I got a message saying that there is no such thing as the driver that I asked. I'm confused, I tried to contact technical support, but they refused to help that my system is more under warranty.

  I also tried the software and drivers download page for my model - Pavillion a6744uk, and which does not list the updates to the Bios.

  I would like to dismiss the alert. According to the page of your listing, you have a motherboard Asus IPIBL-LB.

  http://support.HP.com/us-en/document/c01324212

• Downloaded the wrong BIOS update

  Hello, I'm val. It's my pc, http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5071... I downloaded updated bios wrong, H-RS880-ΜATX Motherboard BIOS update which I discovered that my mother board need to update BIOS of motherboard of N-Alvorix-RS880 and I am on this computer now it works very well the only difference I noticed is after I started my computer and log I get a black screen for a while until Windows explore lights, which takes more time to do this, I usually start to the top of the Explorer windowse myself. whenever I'm trying to download the N-Alvorix-RS880 motherboard BIOS update it gives me the bios image 252 error code is invalid or damaged. I have no idea of what having the wrong bios update will do to my computer but I keep my computer on at all hours of the day. I've been looking online and I see computer most people becomes useless and I wonder why mine is not useless, but in any case I hoping to get help, please save me to things I am aware of a .

  Hello Valentink,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you believe that you have installed an incorrect BIOS update on HP Pavilion Elite HPE-510y desktop PC. I checked and the two BIOS updates you link to are for your computer, the only difference is the version the update of the BIOS of motherboard ΜATX-RS880-H is Version 6.11 Rev has what is more recent, then the N-Alvorix-RS880 card motherboard BIOS update which is Version 6.07 Rev A. You cannot install the second update is because the you have a more recent version.

  I wouldn't worry have the incorrect BIOS up-to-date is one you have for the computer. As you can see on the page the two updates BIOS Drivers of HP Pavilion Elite HPE-510y desktop PC are listed for your computer.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• No noise/driver does not work after BIOS update

  Hey, I'm having a problem with my audio drivers. I have what I think is a HP P5RC - motherboard (I'm still not positive, because it was given to me, and I not found any precise identification on it), and I use the onboard sound on this subject. I've had versions of Windows 7 on this computer since the Release Candidate, and at the time I had to manually download the Realtek audio drivers to get the sound to work. I had to do the same thing when I got the full version of 7 Ultimate. After installing Win7, I had various problems. I was able to trace the problem down to the motherboard, but wasn't sure if it was a hardware or BIOS problem. I tried updating the BIOS to Bishop 3.08 since this page and found no big difference, apart from the fact that the sound did not work. I tried redownloading and installing Realtek drivers and restarted, but I still get all the sounds. What is another problem with the material of the motherboard, BIOS update problem or a driver problem?

  Thanks in advance!

  -AMV_Ph34r

  Edit: I should probably note that I built the computer and used the motherboard that was given to me in this document is not an HP computer.

  Edit 2: Another note - I have an Asus EAH3450 video card, which has a HDMI port on it. HDMI audio driver has two audio devices in the control panel and Device Manager. However, I do not have a compatible monitor HDMI, so I need the built-in sound card.

  Because your video card can also function as a sound card you must go into the BIOS and change your sound option to 'Auto' (which is probably trying to use your card as the audio device video by default) for the on-board sound of motherboards.

  If you found my answer helpful please say thanks with a KUDO (click on the star).

• Presario SR5152NX: Looking for AMD Motherboar d update of the BIOS for Presario SR5152NX

  I got the BIOS file for the update. However, the installation does not work on Windows 10. He is looking for Vista. Is there a way to delete the image file, so I can update BACK?

  Install the last 5,14 BIOS on the motherboard will not give you the necessary UEFI settings used with the WIndows operating system beyond 7 (ie 8 and 10).  That's what I think, it was your intended purpose.

• Looking for an update of the bios for Acer aspire M1641 motherboard

  Looking for an update of the bios for Acer aspire M1641 motherboard

  All I could find was the one for the acer aspire M1640 which has a different card number, but is as close as I can get for it. That's the good? If this isn't the case, anyone would be able to point me in the right direction?

  Thank you.

  FTP://FTP.Acer-euro.com/desktop/aspire_m1641/BIOS/

• Satellite M50: Looking for an update of drivers and BIOS

  I brought my laptop Hong Kong model number: 7F014

  I'm looking for updates for my drivers and including any update of the BIOS... but there isn't any driver available for download or in HK from Toshiba site or its dealer Knight-itech...

  can someone help me?

  THX!

  [Edited by: admin on 21 January 06 11:12]

  Hi William,.

  You can try the drivers from the web site of Toshiba UK:

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=UK

  You can also get updates of BIOS, but make sure they are compatible with your model.

  Kind regards

• Looking for a NVIDIA nForce Serial ATA Controller Driver Update for Presario CQ5107C

  Hello

  The last two weeks, my computer, which is a Compaq Presario CQ5107C been freezing while I'm on it, and while I'm even not use without programs open. The pilot also missed a couple of times during use, but a message pops up saying something close to "driver recover successfully. Also, when I stopped it, it takes forever to stop and sometimes when I try to shut down properly, it goes to the blue screen and said that one of the drivers failed, which I guess it's my NVIDIA nForce Serial ATA Controller driver. My GetForce put up to date the most recent driver updated and there is no problem I know with whom. I read a litte autour my ATA driver can slow down and start doing this gel then go to blue screen if it malfunctions. I'm running on a 32 bit Windows Vista processor and have not yet update my Windows 7. I was looking for every possible way get an update for my ATA controller driver anywhere without having to pay for it. I guess I should upgrade to Windows 7 to possibly get an update. Update to Windows 7 would remove all the programs/personal off my computer files and if I had to stop the gel? Any help would be great because I searched everywhere and found the best solution yet. Thank you.

  Here are the specifications of your Compaq Presario CQ5107C desktop computer. According to the specifications, it uses a GeForce 6150SE / nForce 430 chipset. The chipset driver is below.

  Windows Vista/Win7 32-bit driver v15.49

  Supoorts; 430 / GeForce 6150SE, 430 / GeForce 6150LE, 430 / GeForce 6150, 430 / Geforce 6100, 420 / Geforce 6100, 410 / GeForce 6150LE, 410 / GeForce 6100, 405 / Geforce 6100, 400 / Geforce 6100

  Driver Ethernet (v73.14 +) WHQL

  (V73.16) network management tools "Sedona".

  SATAIDE (v11.1.0.33) WHQL driver

  SATARAID Driver (v11.1.0.33) WHQL

  Application RAIDTOOL (v11.1.0.30)

  SMBUS (v4.74) WHQL driver

  SMU (v1.71) WHQL driver

  GPU (v190.38) WHQL driver

  PhysX (v9.09.0428)

  Away Mode Driver (v6.0.6000.114) WHQL

  Installer (v7.57)

• Looking for 07e8h Manual of the motherboard and Bios!

  Hi, I'm looking to get a copy of the manual that came with the card mother 07e8h from compaq and a bios that would allow overclocking.

  It is unlikely to find any BIOS of HP/Compaq which allows overclocking. If your system is a Compaq Presario 6000, 6000 t, 6000xx or 6100xx series Desktop, this PDF may be what you are looking for;

  http://h10025.www1.HP.com/ewfrf-Java/Doc/PDF/c00000813.PDF

  and the drivers for the 6LPXE1 version can be found here;

  6LPPXE1 drivers

  Hope this helps

  Frank

• Satellite A100 - looking for a BIOS update

  I have the problem of my laptop: the screen goes black and the pc restarts

  Suggest you solution and problem BIOS update reports on the technical page of toshiba supprt. When I get my satellite A100-036 give me the error page not found the page you requested.

  Help, please

  > when I get my satellite A100 - 036 give me error page the page you requested could not be found

  What is the number of short model of your laptop? usually, you can find it on the underside of the laptop.

  > the screen goes black and the pc restarts
  > Reports on the problems and solution suggest to update the bios in the technical page of toshiba supprt

  Theoretically, bad Os. or hardware problem may cause reboots in the round. Overheating can also make the Cpu and other parts on the overheating of the system mobo and it restarts.

• Holly AAHD2-HY Pegatron Bios Update motherboard

  Is someone can you please tell me if there is an update available for the motherboard bios above.  I have upgraded to windows Pro 8.1 with Media Center.  My system information is below.

  Name of the Microsoft Windows OS 8.1 Pro with Media Center
  Version 6.3.9600 Build 9600
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the system
  System manufacturer Hewlett-Packard
  P6-2100 model system
  System Type x 64-based PC
  SKU QW795AA #ABA system
  A4-3420 APU AMD processor with 2 logical processors, 2 Lossnay, 2800 Mhz, graphics HD Radeon (TM)
  BIOS version / Date FRIEND 7.15, 16/12/2011
  SMBIOS Version 2.7
  Embedded Controller Version 255.255
  UEFI BIOS mode
  Baseboard manufacturer PEGATRON CORPORATION
  Model baseboard is not available
  Name of plinth base
  Role of platform office
  State of secure boot not supported
  PCR7 Configuration binding is not Possible
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "6.3.9600.17196".
  Eastern Daylight Time zone
  Physical memory (RAM) installed 8.00 GB
  7,49 GB total physical memory
  4.49 GB available physical memory
  15.0 GB total virtual memory
  12.0 GB available virtual memory
  Page file space GB 7.50
  Paging file C:\pagefile.sys
  Hyper-V - VM monitor Mode Extensions Yes
  Hyper-V - second level address translation Extensions Yes
  Hyper-V - virtualization enabled in Firmware No.
  Hyper-V - data execution Protection Yes

  Hello MattNC79,

  I understand that you are looking for an update of the BIOS of your desktop PC HP Pavilion p6-2100 using the card mother AAHD2-HY (Holly). Unfortunately, I couldn't locate an update of the BIOS for that motherboard at this time.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Pavilion Media Center M8400f Bios Update for Windows 7

  HP Pavilion Media Center m8400f. The Vista operating system has been replaced by Windows 7 (64 bit) a number of years.

  I've updated one of my hard drives with a SanDisk SSD (it is now my main drive with the operating system and all my files on board).

  The bios on the PC has never been updated.

  The SanDisk SSD dashboard software will not recognize the SanDisk SSD as the system has designated the SSD as a SCSI device. I need to access the bios for this change to AHCI. The current bios does not support this.

  The PC has a card mother MCP61PM-HM. There is no update for Windows 7 BIOS for that motherboard I know (updates Vista only).

  　

  SanDisk gave me a link to http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-82094-1&cc=us&dlc=en&lc=en&... that shows a card mother M2P61PM-HM for m8400f desktop PC. This Bios download supports Windows 7 (64 bit).

  Can update the Bios to download safely a card mother M2P61PM-HM for card mother MCP61PM-HM I currently have?

  Hello

  The HP BIOS update link provided SanDisk is an update of the BIOS of your PC. It is listed under Win Vista 64 bit driver downloads here.

  If you look at the site to download the drivers for your PC you'll only see driver support for Win Vista but on 2010-04-08, Version 5.29, 1.47 M BIOS updatedshows support for Win 7.

  But the problem is this: the BIOS updates must be performed using the PC operating system comes with; in your case, Win Vista. Extreme care must be exercised when updating the BIOS under normal circumstances. I would not classify your situation as usual.

  I saw others download an update of the BIOS for their PC and try to install an operating system upgraded with disastrous effects. The PC was bricked.

  Be prepared for the worst case if you try to install the update to the BIOS.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

  HP products:
  Office 810-150se (Win 8.1)
  17 t - j000 Notebook (Win 8 upgraded to Win 8.1)
  H8 1380t CTO Office (Win 7)
  560z Desktop (Win 7)
  
  Other PC:
  Laptop Dell Inspiron (Win XP upgraded to Windows 7)
  Custom build: (Win XP upgraded to Windows 7)

• HPE h8-1300z AMD (AG2) CTO: BIOS updates

  I get errors in the case where the viewer that points to the firmware updates that are not available.

  Seems that I bought a model desktop computer that was removed from the line up, just after that he was released. My machine was released in 6/2012 (bought mine in 7/2012) and went through 12/2012.

  This is why when I try to find updates for the software, there is none, as well as questions about the BIOS updates that do not exist.

  That is the problem. I already went to support HP software update page and has been properly using my model number and serial number and downloaded and installed several updated to find that it was not for my pc. The problem being HP offered so many different types of this particular model was a type of 'Customer To Order. All updates are so hit or miss due to different types. NVIDIA as opposed to ATI - AMD, Intel, as opposed to AMD and on the line is the differences in motherboards, hard disks, LAN cards and it goes on and on. So, instead of being able to stem what model gets what it ends up being a guessing game. I am aware of the differences of GPU and CPU but uses this to emphasise that it is confusing, not only for me but it seems HP to find which refers exactly to my bench.

  I made the mistake of trying to install an update of the BIOS that was listed for my pc see it is bad that did not take long to understand it fried my machine one should be fired and replaced by HP under warranty. I am out of warranty now and am stuck with trying to find in the section Support, which refers exactly.

  The Question? : - I have no chance or HP plans, on the road, to keep updates on these older models. Seems I got a machine that was a little bit late, just like the models of Windows 8 were charged and there was no decline more motherboard I have is proprietery even if it is not made by Gigabyte, after contacting them they have no idea what my MB or if there are updates to the BIOS.  I spoke with a representative from HP repair when I had to send it in last summer and said "off the cuff" well "you may need to get an another MB and of course which will void your warranty. Imagine that felt.

  A warning I made an update of the chipset and it slowed my machine in his reading and writing speeds and ended up having to uninstall the IDE drivers / ATA and let Windows install a generic SATA driver to get speeds in paragraph... for some reason any I find this right on the edge of the unacceptable to HP.

  Sorry, Big Dave, but you're wrong. First reading of Scripture & speeds were half of what they were supposed to be, then using three types of disc utilities including all the three said methods of transfer of 300 GB rather than the 600 GB transfer modes. Even the s HDD tray case showing in these modes. Update the firmware on the Samsung magician update not due to lower transfer mode that has been reported by the OEM. Its software said you are in AHCI mode, but you're NOT in mode SATA III.

  Only by uninstalling the SATA controller AMD was I could join SATA III speeds that all three utilities confirmed and was able to run the Software Wizard and finishing of optimization settings.  Sequential transmissions went from 255.3/116.4 to 453.5/138.5 and btw I had a long telephone conversation with Samsung and their people said I was getting speeds SATA II and that it was said by the guys from reps/repair of HP in Tennessee themselves than those speeds where SATA II speeds also. Do not make any assumptions.

  I found an updated BIOS to start with and unfortunately found that listed for my only disabled MB MB. The SSD itself is fine. Here are registry settings changes from 3 to 0 then started to the BIOS and change the setting from AHCI RAID storage

  REG ADD HKLM\System\CurrentControlSet\Services\msahci /v start d 0 /f /t REG_DWORD
  REG ADD HKLM\System\CurrentControlSet\Services\atapi /v start d 0 /f /t REG_DWORD
  REG ADD HKLM\System\CurrentControlSet\Services\amdsata /v start d 0 /f /t REG_DWORD
  REG ADD HKLM\System\CurrentControlSet\Services\nvstor /v start d 0 /f /t REG_DWORD
  REG ADD HKLM\System\CurrentControlSet\Services\nvraid /v start d 0 /f /t REG_DWORD
  REG ADD HKLM\System\CurrentControlSet\Services\iaStor /v start d 0 /f /t REG_DWORD

  When you restart, windows does the rest.