Presario V3000 "fuse"?

Similar Questions

• HP Presario V3000: Bios disable the KEY for HP Presario V3000 - HELP!

  Help, please!

  I have a HP Presario V3000, I forgot the password of the BIOS, disable System KEY is: 08638, can someone help me to unlock it? Thanks in advance!

  Saul Martinez.

  :

  Please read the first post on the link below for what to do with the stop code, which should solve your dilemma.

  http://h30434.www3.HP.com/T5/notebook-operating-Sy...

  Then...

  You can:

  1. use the unlock code you generated to enter BIOS

  2 disable all passwords that are enabled in the Security menu of BIOS.

  3. If the request for current password - enter the unlock code

  4. for the new password, simply press the ENTER key

  5. repeat the same thing to check the password column.

• Can I upgrade to SSD with Compaq Presario V3000? If so, how to activate the AHCI?

  I have an old compaq presario v3000. The hard drive failed and I would like to upgrade to an SSD if possible in the hope of improving performance. My laptop does support an ssd? Also, I read on a ssd that bios have an option to enable the AHCI? I don't think my bios has this option. Any help would be greatly appreciated.

  Thank you

  The service guide shows only 2 GB maximum memory installed.

  SATA IDE to AHCI passing via regedits

  For safety reasons make registry changes by hand instead of download the script.

• I bought a Compaq Presario V3000 with Vista. I want to switch to XP. How can I downgrade?

  I bought a Compaq Presario V3000 with Vista. I want to switch to XP. I want to know the next steps.

  original title: Vista to XP switch

  You need to find (good luck) a copy of Windows XP to purchase.
  You should make sure that your computer is compatible with XP, and that the manufacturer has all the necessary drivers.

• HP PRESARIO V3000: CMOS PASSWORD FOR HP PRESARIO V3000 disabled system (10945)

  PASSWORD CMOS FOR HP PRESARIO V3000 disabled system (10945). Everytime I open my laptop it calls a cmos password and after several attempts at system was turn off the fact that the code of 10945. What should ba the password for this?

  Thank you

  EDSAR

  @EDSAR

  Enter: eztoyav

  or

  stouzim

  Kind regards

  DP - K

• Presario v3000 think usb flash drive is a CD-ROM/dvd-rom; recognizes any CD

  Presario v3000 running XP PRO sp3

  Hello

  My CD-ROM/DVD-ROM drive disappeared from the Manager of devices and Windows Explorer about 2 weeks; I tried all the fixes the base of knowledge without result. When I put a CD in I can hear it running, but nothing happens, even when Windows says it's looking for a CD.

  However, when I put a Flash drive on a port USB, "reader of CD/DVD-ROM" appears in the device, Manager who think that Flash is a CD-ROM/DVD-ROM called drive'Sandisk U3 cruzer Micro USB device'.  Dev man lists the Flash exactly in the same way under ""hard drives "; " under "Bus USB controllers ' it is listed as'USB mass storage device'.

  Even with the USB flash drive, "'my computer ' still does not show aCD-ROM/DVD-ROM drive, but it puts a CD icon next to "U3 system", which he calls"(e) ". "

  Here's what looks like 'My Computer' in Windows Explorer:

  (drive icon)   + Local Disk (C:)

  (drive icon)  + HP_RECOVERY (:)) d )

  (cd icon) System U3 (e :)) )

  (drive icon)  + PKBACK #001 (f)

  I am so very confused and mentally exhausted.  Can someone please help me straighten this mess?

  Thank you...

  Liliane

  PS my BIOS says for what it's worth, that my OS is Vista, when in fact it is XP PRO!

  Try this:

  1. click on start

  2. click on run

  3. type in diskmgmt.msc

  4. in the lower pane, scroll down until you see your device

  5. right click, choose paths and change the drive letter

  6. click on edit

  7. change if necessary

  Hope this helps

  Restart the computer and check to see if the same thing happens.

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Presario v3000 wireless lan and its drivers for windows xp

  I need drivers for compaq presario v3000 wireless lan and sound for windowxp sp2. One mentioned on the hp support site will not work.

  Hi, Tarun:

  Installation of the audio driver for your laptop is delicate.

  Before you install the current sound driver, you MUST first install the MS. UAA driver

  Thus, you must uninstall any audio driver that you have already installed, reboot, and then install this driver.

  It is possible that you have scrambled the installation by trying several audio drivers and you can be better to reinstall XP and making sure that you install the Chipset driver first, then the video driver, then the MSUAA driver, then the audio driver and rebooting after each instance of the above facilities

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-45958-1&CC=US&DLC=en&LC=en&os=228&Product=1817059&sw_lang=

  Then, you install the audio driver. It's the correct driver based on the hardware ID you have posted.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-49193-1&CC=US&DLC=en&LC=en&os=228&Product=3180329&sw_lang=

  I am allowing liaison with the latest driver for your card wireless as the v3000 page is old.

  First one on the list is what you need...

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=22118&lang=eng&OSVersion=Windows%20XP%20 * & DownloadType = software % 20Applications

  You should use the drivers provided by this template page because you have Intel hardware.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3180329&LC=en&cc=us&DLC=en&task=&lang=en&cc=us

  Paul

• Presario v3000: Compaq Presario v3000 BIOS Password Reset

  Hello Sir,
  
  I have a bios password problem. I tried to reset the cmos by removing the rtc battery. But I can't remove password. Disabled system code is 09565.
  
  Thank you
  MNK

  When asked for the password try nddo or vrckh

• Compaq presario V3000: Compaq Presario V3000 Bios password

  the old laptop my father was recovered after a long time, but he's asking for bios password and we can not able to remember everything... My father said that he was not sure it was there in the first place. It shows the DISABLED 07437 SYSTEM if we try to guess the password 3times. can anyone provide good code for the bios... ?

  @AshwinRuffian

  For the power on password:

  Enter: gxdaxjp

  or

  uvrmc

  Kind regards

  DP - K

• Compaq presario V3000: System disable 12022

  My laptop on and the screen flash disply compaq then the next step only enter password then 3 entry at the time of the bad system password disable 12022 then go now and again asking enter password k
  reset the bios but does not

  @kennedytnj

  Enter joazrn

  or

  vmnlwd

  Kind regards

  DP - K

• Compaq presario v3000: BIOS password

  
  

  Hello

  Enter fztuztu

  or

  wooalv

  Kind regards

  DP - K

• How to let sfc.exe replace damaged dll cache files when presario v3000 does not see xp pro cd?

  Hello

  SFC. EXE/scannow ask me to put my xp pro disk, so it can copy files into the dll cache.  When I put the disc in the cd drive, he said something to the effect of "you must have used the wrong disc or the disc is damaged" and just stop there.

  My cd/dvd drive is not presented in win Explorer or the Manager of devices for about 2 months now.  I did each every every thing, including the removal of the upper and lower filters 2 weeks ago (I deleted the wrong key registrey and just now in my office!).  I do not think that caused sp3 cd player to disappear, as I've been running for a very long time now and the cd player that disappears is fairly recent.

  My question is: How can I get the dll files in my cache dll if my cd player does not work?  Maybe corrupt dll files are what initially is the cd player to disappear.  I tried to copy files to a flashdrive system32 but sfc will seek only a cd player.

  Thank you very much...

  Liliane

  Hello

  SFC. EXE/scannow ask me to put my xp pro disk, so it can copy files into the dll cache.  When I put the disc in the cd drive, he said something to the effect of "you must have used the wrong disc or the disc is damaged" and just stop there.

  My cd/dvd drive is not presented in win Explorer or the Manager of devices for about 2 months now.  I did each every every thing, including the removal of the upper and lower filters 2 weeks ago (I deleted the wrong key registrey and just now in my office!).  I do not think that caused sp3 cd player to disappear, as I've been running for a very long time now and the cd player that disappears is fairly recent.

  My question is: How can I get the dll files in my cache dll if my cd player does not work?  Maybe corrupt dll files are what initially is the cd player to disappear.  I tried to copy files to a flashdrive system32 but sfc will seek only a cd player.

  Thank you very much...

  Liliane

  First, run fix cd carpet first to see if it will solve your problem with your devive rom.

  http://support.Microsoft.com/kb/982116

  A description of sfc / scannow from MS.

  "System File Checker allows an administrator to analyze the files all protected to check their versions." If the System File Checker detects that a protected file has been replaced, it retrieves the correct version of the file in the folder cache (% Systemroot%\System32\Dllcache) or the Windows installation source files and then replaces the incorrect file. System File Checker verifies and repopulates the cache folder also. You must be logged in as an administrator or as a member of the Administrators group to run the System File Checker. »

  http://support.Microsoft.com/kb/310747

  When you receive the error message you have inserted the wrong disk, it could be the drive has bad service pack, or it could be that the system searches for the wrong drive.

  Click Start > run > type regedit > click ok.

  Navigate to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup . Click the "setup" folder to expand the content in the right pane. Scroll through the list in the right pane and look for "SourcePath". Make sure that the source path is set to the drive letter of the rom of the device.

  If the source path is set correctly, I suspect that the disc contains a pack of different service that is installed on the computer. There is a solution to this as well.

  Click on the link below and download the Service Pack 3 for IT Tech. Save the file. Once the download download and install the trial version of Winrar from the second link below. After Winrar is installed, right click on the Service pack 3 file and choose "Extract here" with Winrar. When the extract window opens type C:\ in the location of file for the files to be extracted. This will place the file i386 in the root of the C drive. Then, return to the instructions above for the source path and replace the source C:\ path. Now, run sfc/scannow again.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en

  http://download.CNET.com/WinRAR-32-bit/3000-2250_4-10007677.html

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• Presario v3000: presario v3000 bios is protected by

  I deleted the admin password, but obviously want the user password, the 02501 error code

  Please give me a code checksum to clear the passwords of the bios

  Thank you for your time and attention

  Hello

  Try

  Generic Phoenix	rvwalv
  HP/Compaq Phoenix BIOS	zoyflq

  Concerning

• Presario V3000 boot says enter the password system off (10471)

  laptap

  Hello

  Try to enter: ngqrngq

  or

  CXG

  Kind regards

  DP - K

• Connection of external monitor to a compaq Presario V3000 to S Dell S1909WX

  While connecting the laptop to the external display, nothing seems to happen. Even if I just stop and then plugged in, the laptop is no detect the monitor. How should I go about to connect the monitor?

  Hi Pandit_Maharaj,

  1. what happens after that you connect the monitor?

  2. what port you connect to?

  3. the monitor is detected in Device Manager?

  New monitors data Identification EDID (Extended Display), a standard video data format that contains basic information about the capabilities of the screen, including maximum screen size, resolution of screen of support, refresh rate, color depth, and orientation.

  If a screen is enabled EDID, Windows automatically identifies the display and applies the appropriate display settings.

  If Windows can't identify the additional display, you can manually open the dialog boxnew display detected using one of the following steps:

  Step 1

  First of all, check if the monitor is getting detected in Device Manager.

  A. Click Start, type devmgmt.msc in the start search box and press on enter

  B. check if the second screen is getting detected.

  Then press the hotkey on your mobile PC that turns on an additional display. The function (FN) FN + F5 keyboard shortcut is used for this purpose on many laptops. To determine what keyboard shortcut turns on another view, see the documentation that came with your mobile PC or go to the manufacturer's Web site.

  Step 2

  Opening Windows Mobility Center by clickingStart , clicking Control Panel, clicking Mobile PC, and then click Windows Mobility Center.

  Then, on theexternal display tile, click Connect display.

  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Solving the multiple monitor problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think