Connection of external monitor to a compaq Presario V3000 to S Dell S1909WX

Similar Questions

• Tecra Z50 - need to connect two external monitors

  I think to buy Tecra Z50, but one of the features that I need is the ability to connect two external monitors.

  Is it possible to have a monitor connected to the HDMI and a VGA (with computer laptop lid closed)?

  * Hi-speed III Port Replicator is not an option, because it is not available in my country (Croatia).

  Hello

  I don t think you will be able to connect two external monitors to this laptop using HDMI and RGB port at the same time because of different types of signals.

  The RGB/VGA port supports analog signal.

  The HDMI port provides the digital video output and when the external monitor is connected to the HDMI port the device is set to HDMI.

  > * Hi-speed III port replicator is not an option because it is not available in my country (Croatia).
  What of the Dynadock? Its an external device connected to the s for computer laptop USB port.
  It supports own graphic unit and you can connect to another external monitor such Dynadock 2nd.

• WT8-B-102 - how to connect the external monitor

  Hello

  I have a toshiba WT8-B-102 Tablet and I need to connect an external monitor (vga or hdmi).
  My tablet doesn't have an hdmi port.

  Any solution?

  Best regards
  Francisco

  Hello

  WT8-B-102 does not therefore support other output micro HDMI port the connection to an external monitor or TV isn t possible.

  But as far as I know the Tablet supports the wireless display technology (Miracast / Intel WiDi) and if the TV supports the same technology, you should be able to output the internal display on TV s screen too.

• Connect an external monitor to an Equium L10-300

  Hello

  I wonder if someone can tell me how to connect a Viewsonic external monitor to a laptop Equium L10-300?

  I unplugged the screen and when I got to reconnect again I got a message "No signal input" on the monitor. I sent the manufacturers of screens that said I had to turn on the laptop, wait for Windows to load, and then press and hold the function key, while pressing F10. There is nothing! Before that, they said that I needed to press the feature key followed by the key with the monitor symbol F on it, it doesn't work anymore!

  Can someone help me out here?

  Thank you

  Jodie

  Hello

  The laptop supports a port external monitor (port/VGA RGB port).
  You need a VGA cable to connect the external monitor to this port of s for laptop.

  After that, use the FN + F5 key combination to switch to the external video output
  All that s

  If the buttons FN n t work then you must install the utility of the European driver Toshiba page shortcut

  PS: I assume you are using Win XP
  You can also do this:
  Right click on the desktop
  Choose Properties
  Has chosen the last settings tab
  Choose Monitor 2 and check extend my Windows desktop on this monitor

  Welcome them

• How to connect an external monitor to the hp slate 21 pro

  I have a HP Slate 21 Pro. Anyone know how I can connect an external monitor to reflect what's on my tab

  Hello

  There is no way to connect an external cable monitor such that HDMI port is entered only.

  Your only solution would be to use the wireless display option in the settings, but you would need a monitor/TV/adapter that would work as a Miracast receiver.  I'm not sure specific screens that function as receptors, but I used adapters are the PTV3000 Netgear and Actiontec SBWD100A01,.

  I hope this helps.

  Kind regards

  COWA

• Connect the external monitor to my Sony VAIO laptop Win XP

  Connect the external monitor to my Sony VAIO laptop Win XP

  thanking you in advance

  Connect the external monitor to my Sony VAIO laptop Win XP

  thanking you in advance

  Is there a question here?

  Read your manuals and find a way to use your laptop computer based on the instructions from Sony to connect external (including projectors) monitors for the laptop.  Usually a connection (as you said Windows XP where you have published, probably VGA) for the monitor and a few buttons to tell the laptop to mirror or extend the display to the second monitor.

• connect an external monitor to my Eeepc netbook

  How to connect an external monitor to my Eeepc netbook
  I followed the instructions on the support for the display menu, but a monitor turns on after the initial startup

  Hi GloriaFreeman,

  Follow the steps in the article.

  How to configure and use multiple monitors in Windows XP

  http://support.Microsoft.com/kb/307873

• Possible to connect an external monitor for laptop HP Pavilion dv4t-4200 CTO

  I have a HP Pavilion dv4t-4200 CTO Entertainment Notebook PC model # A1M02AV and it has a VGA, one port that resembles a cable port phone/broadband and one that looks like a USB port, but indented on each side down. I can even connect an external monitor? How will I know if I have more than 1 video card? In addition to the usual USB/headphone ports, I have not all ports. He says that my drivers are up to date... but I don't know even what I'm looking for. Do I need to install something or buy some kind of adapter?

  I'm trying to connect an external Dell montitor via the VGA port with a VGA cable. The monitor has power, but my laptop does not detect recognize them / it. However, when I plugged in the first time in, my laptop screen has shrunk in a square (vs the entire screen) so he acknowledged something... but nothing happened on the external monitor.

  I tried to detect through my display settings, but I have accidentally changed some display setting until the reception desk shows only 1 monitor, but not selected my real laptop screen or something or changed to be Monitor 2 (even if there is no monitor 1), so when I plug the cable into my laptop suddenly my desktop disappears and it's just a white background screen - and I cannot access the screen of the computer settings or whatever whatever... when the cable is disconnected this setting seems to be normal, so I can not understand how to fix it.

  Sorry, I don't know what I'm doing here - please help!

  Hello

  All Dell monitors are equipped with CD for the drivers. Your laptop may not know the monitor without its driver, it will not install automatically. Please check:

  Ringht click an empty space on the desktop,

  Click Customize

  Click on display

  Click on change display settings

  You can see the TWO laptop screen and external monitor in there, as shown in the following image:

  

  For the test, I put my Dell monitor is my main screen. If I can't see 2 monitors, you need its driver first and then check the cable.

  Kind regards.

• Can I upgrade to SSD with Compaq Presario V3000? If so, how to activate the AHCI?

  I have an old compaq presario v3000. The hard drive failed and I would like to upgrade to an SSD if possible in the hope of improving performance. My laptop does support an ssd? Also, I read on a ssd that bios have an option to enable the AHCI? I don't think my bios has this option. Any help would be greatly appreciated.

  Thank you

  The service guide shows only 2 GB maximum memory installed.

  SATA IDE to AHCI passing via regedits

  For safety reasons make registry changes by hand instead of download the script.

• I bought a Compaq Presario V3000 with Vista. I want to switch to XP. How can I downgrade?

  I bought a Compaq Presario V3000 with Vista. I want to switch to XP. I want to know the next steps.

  original title: Vista to XP switch

  You need to find (good luck) a copy of Windows XP to purchase.
  You should make sure that your computer is compatible with XP, and that the manufacturer has all the necessary drivers.

• Unable to connect to the internet with my Compaq Presario CQ5500F after a clean install of Win 7 64 bit

  Hello

  I recently did a clean install on my Compaq Presario CQ5500F desktop, but when I finished, I realized that I could not connect to wireless internet almost anything. To clarify, my internet worked before the clean install. I know exactly of what readers have been installed, but I do not know the network controller has a yellow question mark on it now. (See attached image)

  In addition, it seems that the computer does not have a wireless card although I was previously using an omnidirectional antenna external wireless connected to my wifi.

  I have already visited the HP/Compaq site here http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4209... to install the drivers, but it seems that the network controller, it does not install correctly.

  Can someone help me please? I am very frustrated.

  In fact, I just solved it!

  I looked up the material ID I had just posted on Google and found that someone had the driver on his Skydrivefiles. Then I followed their instructions and went into the Device Manager and selected Update driver the driver of your properties of network adapters tab and pointed on the expanded files.

  Turns out I need files for Ralink RT61 Turbo Wireless LAN Card.

  Everything works again!

  Thanks for me direction in the right way, Paul!

  I hope that someone else has acquired this too!

• How to connect the external monitor to Satellite T130-C17?

  It has a HDMI port on my laptop and I would use it to connect to a monitor...
  The monitor supports DVI and VGA...
  So I thought that buying a VGA-HDMI would do the trick...

  Unfortunately, when I plug it almost doesn t do something...
  I want to use the monitor as my monitor 3rd btw. That's why I want it on the HDMI port.
  The resolution isn't really a problem for me because I put t want to do something great graphics on it anyway.

  For me, it makes sense to use the HDMI Cable DVI and not to use the VGA port.

  This third monitor is a little strange to me.
  You want to connect two external screens/monitors to your laptop satellite?

• How to connect multiple external monitors to Portege R830

  Anyone has any advice on how to connect more than one external monitor to a Portege R830?

  I have a monitor through the station home, but when I attach a second monitor to the port of the laptop do not recognize at all.

  It is used to work on my old Portege, but for some reason not on the R830.

  Any tips or advice?

  Hello

  You use the same port in the docking station and Portege R830?
  Docking station replica ports in order to use the Portege docking station port or port.

  If you want to connect more than one external monitor to the laptop then I would recommend using something like Toshiba Dynadock
  http://us.Toshiba.com/computers/accessories/dynadock/

  Welcome them

• Unable to connect 2 external monitors via the Port Replicator using Portege Z30 - 16U

  Hi all

  I need hell, I just moved from another laptop for Portege Z30 - 16U, I spent hours trying to connect my 2 external monitors to my Replicator Port Hi-Speed III 120W, but my laptop will see a monitor.

  I used 2 external monitors with my laptop for years because I do a lot or reading and I don't want to use the one and the laptop screen.

  I tried the mixture of a VGA and a HDMI and VGA cables, but nothing works.

  Can anyone tell me how I can connect and discover 2 external monitors with this laptop and port replicator, I can't believe that this is not possible, it makes no sense that Toshiba would then technilogically behind other laptop manufacturers.

  Thank you

  Liga

  Hello

  I'm not familiar with the Z30 Portreplicator, but the general behavior of the replicators of the double-displayconnector, is that 1 can be used.
  Not 2 simultaneously.

  I could be wrong, and you should easily be able to check it out - use only 1 at a time.
  First, then the other.
  If the two works when used alone, then my suspicion is right.

  I hope this helps!

  TOm BR

• Satellite L650 - HDMI connection for external monitor

  I've linked the laptop to my Sony LCD TV via HDMI, no problem. I have a (Acer, 24-inch) LCD monitor that has a HDMI port also. I used it to play ps3 and xbox360 via HDMI connection, no problem. I have two lines HDMI 1.3. The two lines are working without any problems.

  However, when I connect my laptop to my LCD Acer just external LCD monitor can t work properly. I can barely see what is display on the monitor, very snowy. It's hard to describe. I took a photo but don't know where to download it here.

  I tried both HDMI lines, but both failed. I tried to change a few settings in the laptop, but nothing makes any difference. I'm looking for the driver for video card on the Web from Toshiba website and found that my current license is updated.

  I'm not a tech geek, but I think that I don't know something on the computer. Am I missing something here?

  Guys (and girls), please throw in an idea (tooth tell me to check if the connection is good, I don't already).
  Thank you

  Hey,.

  If you connect your laptop to external monitor and press the FN + F5 key combination what happens exactly? Pressing the FN + F5 key combination shows different options and you should test with external monitor only (not the clone image). If you work on external monitor doesn't do this work?

  In addition, you must connect the devices before starting their.

  Also, take a look in the BIOS and try to load the default settings. Make sure that that the HDMI cable is connected before starting Windows and check the status again.

  By the way: what operating system are you using exactly?