Presario V6000 upgrade

Similar Questions

• IK heb een compaq presario v6000, in een keer is mijn wifi verdwenen, kan ik hem ook niet meer vinden, maar zie wel een onbekend expensive, wie weet wat ik moet doen?

  IK heb een compaq presario v6000, in een keer is mijn wifi verdwenen, kan ik hem ook niet meer vinden, maar zie wel een onbekend expensive, wie weet wat ik moet doen?

  ·                         I'm sorry but these forums only offer English language support

  To make sure you receive support appropriate for your location information, select your region setting from the list in the link below, and then click the arrow button.

  ·                         https://support.Microsoft.com/common/international.aspx

  __________________________________________________________________

  Spijt me, maar alleen deze forums support leningen het in het Engels

  OM maaltijd you zorgen squeeze I of right support voor uw locatie, select uw regio-page ITU lijst in link en klik op pijl-toets steeds.

  · https://support.Microsoft.com/common/international.aspx

   

• How can I downgrade from Windows Vista to Windows XP on my Compaq Presario v6000 series?

  I have Windows Vista. now, I want to go from vista to xp.how can I do this? Please tell me step by step. I have compaq presario v6000 series laptop? thnk

  original title: vista to xp? HW

  Hello

  First thing to do is to make sure that XP drivers are available for your model computer.

  Search drivers XP here model number: http://www8.hp.com/us/en/support-drivers.html

  Then, buy a XP disk and license. You will have to search in online stores (beware of scams, piracy!), for old copies computer stores, etc.

  Then, if you can buy XP, perform a new installation of XP, Vista operating system cut the hard during the XP installation.

  How to do a fresh install of XP: http://pcsupport.about.com/od/operatingsystems/ss/instxpclean1.htm

  See you soon.

• I have a Compaq Presario V6000 Widescreen and I can't find the video driver just for this computer

  I can find the video driver for my Compaq Presario V6000 Widescreen

  Serial number: {Private Information Removed}

  There are 4 computer V6000 but I don't know which one should I use.

  I use my serial number and the model name and the PIN code and still cannot very well the video driver.  can someone tell me were fined the pilot to be used on window XP

• Drivers Compaq Presario V6000 TX (XP)

  Excuse me, I'm sure that this info is clearly displayed, I just can't, and I'm afraid, I'm a mess trying to figure out what to do from threads that have air rel.ated.

  I recently had to replace the hard drive Compaq Presario V6000 onmy (TX, I think)

  Unfortunately, I can't seem to understand that I have the drivers get everything working again on Windows XP.

  In Device Manager I have yellow flags with the following text

  > Audio device on High Definition Audio Bus

  > Base system device

  > Base system device

  > Base system device

  > Ethernet controller

  > HP Integrated Module

  > Modem on Bus High Definition Audio device

  > Network controller

  > Video controller

  > Video controller (VGA Compatible)

  Any help would be appreciated.

  Perfect!  Thank you very much!

• HP-Compaq Presario V6000. Assistant wireless HP wireless button does not work.

  HP-Compaq Presario V6000. Assistant wireless HP wireless button does not work. No button on the wireless keyboard. When in HP, wireless, wireless assistant is disabled, the button to turn on all is visible but does not work. Posted this earlier, not answers. Do you need information more?

  Hello:

  There is a switch wireless on your laptop. Check that it is switched on.

  See the maintenance manual, the link below for the location of this switch. Chapter 1, Pages 1-6, 1-7. Tagged as # 4.

  http://h10032.www1.HP.com/CTG/manual/c01035886.PDF

  I once off me in my dv6810us. Had no idea it was there and cannot connect to anything!

  I must have slipped it out with my thumb.

  Paul

• Presario CQ5320F: upgrade the processor 'not supported CPU.

  I was looking to upgrade the CPU on my Presario CQ5320F, for most popular processors in the list on the HP site for my computer. So I bought one, actually two, of the AMD Phenom II X 4 processors (Deneb). When I installed it, them, I get a message saying that the CPU is not supported. I don't know how I got it done, but it does not work. I bought two of the processors by mistake. The code on the processors that I bought is "HDZ955FBK4DGM", which seems to be the processor in the list of compatible processors on the HP website.

  -AMD Phenom II X 4 9xx/9xxe/8xx Quad-Core (Deneb)

  -AMD Phenom II X 3 Triple-Core (Heka) 7xx/7xxe

  -AMD Phenom II X 2 5xx (Callisto)

  -II AMD Athlon X 4 6xx/6xxe (undactylopodite)

  -AMD Athlon II X 3 4xx/4xxe (Rana)

  -AMD Athlon II X 2 2xx/2xxe (Regor)

  -AMD Sempron 1xx (Sargas)

  I'd appreciate any help.

  Thanks in advance,

  nashville_bill

  Thank you for giving me the answer. I guess it's time to look for a new motherboard now.

  No doubt, it would be nice if someone let HP know this, so people like me would not try to use this processor with the motherboard.

• Compaq Presario CQ5600F: upgrade to M2N68-(Narra6)

  Hello. I have a desktop PC Compaq Presario CQ5600F which took a power surge. I use Windows 10 Pro and I'd like to update the Pegatron M2N68-(Narra5) motherboard M2N68-(Narra6). I saw some of these for the sale of the mobo. Can someone point me in the right direction. I'm trying to find the drivers and perhaps installation information. The motherboards I've seen are either used, rebuilt, or "other nine" with no accessories.

  Hi @stan7926,

  Thank you for your participation in the Forums of HP Support! It is a great location to get resolutions and interact with experts from the community. I understand that you need information on an upgrade of the motherboard of your PC. I'll be happy to help you with this.

  A remarkable work was done by your little research on upgrading motherboard for your desktop PC before you post your question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills and levels of technical knowledge.

  First of all, the specifications are very clear on the HP website. It supports "M2N68-(Narra5)" with the drivers, BIOS and other updates available on the HP Web site. About the upgrade to M2N68-(Narra6), it may be possible, but before you buy the product, I would suggest that you contact a technician on-site that this motherboard is not listed by HP as a compatible Web site.

  I thank you greatly for posting your question on the forums of HP and for giving us the platform to help you. You are a customer of HP and we greatly thank you for doing business with HP.

  It is important that you are having problems with the bios and driver incompatibilities on the motherboard and windows 10 Therefore, it is recommended that you contact a local technician and check the compatibility of the motherboard before making any attempt to improve it. We cannot have the bios for it and corresponding drivers. Once again, you will need to visit the websites of 3rd party hardware manufacturers to update the bios and other drivers.

  I hope this helps! Please let me know how it goes. If it helps, please mark this message as 'accept as a Solution. If you need help, let me know and I will gladly do everything I can to help. If you want to say 'Thank you' for my efforts help, click on the button 'Thumbs Up' to give me a Kudos. I really hope that the problem is solved without hassle and things work fine for you.

  Now carefully and have a great week ahead.

• Compac Presario VN457AA: upgrade memory

  Please help me!

  Is it possible to upgrade my Compac Presario mod.no. VN457AA 2 x 2048 MB DDR3 SD ram 2 x 4 096 MB DDR3?

  There are only 2 memory slots.

  It is very slow

  OSHDK

  OSHDK, welcome to the forum.

  You have the maximum amount of memory installed.  However, you can perform a system recovery:

  http://support.HP.com/us-en/product/Compaq-Presario-CQ5200-desktop-PC-series/3999467/model/4048603/how-to

  This will return your computer in its original configuration to increase the performance of the system.  Installing and uninstalling programs leave remnants of them, which, over time, will begin to slow down the computer.  Must make a backup of your personal data before you start.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Compaq Presario CQ5720F: upgrading Ram

  I wonder ig this stick of RAM is compatitble with the computer and if the computer can manage a RAM of 8g stick replacing the 3g one.

  Kingston HyperX 8GB 1333 MHz DDR3 CL9 DIMM FURY

  Compaq Presario CQ5720F

  Processor: AMD Athlon II X 2 245
  RAM: 3 g (2.75 usable)
  System type: 64-bit

  Graphic video: Integrated using ATI Radeon 3000 graphics

  My friend's computer is out of memory so that she can't play a game with us. She has need of more memory so I want to upgrade the RAM, but I'm not sure which one to buy.

  Mousu, welcome to the forum.

  This is memory that is recommended by HP to be compatible with its motherboard:

  • Dual channel memory architecture

• Compaq presario v6000 v6409tu disk hard bios self-test fail

  Hello

  Windows xp no my pc compaq v6000 not starting and bluescreen showed a couple of times. I ran the BIOS (phoenix) disk hard diagnosis and the test failed. When I opened my HDD I noticed green rust as deposits into the connector on the hard drive. After cleaning with a brush, computer loaded XP successfully. But an hour later, while I was surfing in mozilla suddenly the mouse pointer started late and showed computer blue screen saying that windows has been closed down to prevent damage.

  I would be grateful if someone can tell me if it's a software problem or hard drive error. If I need to replace my hard drive, what are my options, for example. rpm, capacity, provider? Thank you.

  The only way you could have rusted copper into the connector on the hard drive is if liquid got in there so I am reluctant to try to speculate how much damage has been done. I remove the hard drive and connect it to the outside to another computer and run chkdsk on it to see if the drive itself is bad. As long as there is a problem on the part of connector and the interface with the motherboard cannot really trust the onboard hard drive Diagnostics. You could also get an own another new hard drive adapter.

  http://www.eBay.com/ITM/new-Compaq-Presario-C700-F500-F700-V6000-SATA-laptop-hard-drive-connector-/161297513053?PT=US_Drive_Bay_Caddies & Hash = item258e14ba5d

  If it does not turn on the hard drive is bad, you can replace it with any laptop SATA drive no more than 9.5 mm thick.

  http://www.Newegg.com/product/product.aspx?item=N82E16822145587

  Above is a good thing. It is slim (7mm) but it will still go into the caddy and connect to the motherboard with the connecting piece. If the hard drive itself is always good, and you replace the connector piece but he always bluescreens, so I would not spend money on a new hard drive. I would say that there was damage to the motherboard.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Compaq presario sr5518f upgrade processors

  First of all, I apologize if I do not write in the correct section.  A little new here.

  in any case, I'm going to completely overhaul my Compaq Presario SR5518F.  I'll get a new graphic/video card, power supply, and processor.

  Speaking of the processor, I have a question for someone who would know the upgrade of processors.

  The specs of my PC (which can be accessed HERE) said I can move to an Intel Core 2 Duo E7xxx.  I'm looking at upgrading to an Intel Core 2 Duo E7400 processor which has close to 3.0 Ghz (2.8 to be precise) of the operating speed.

  The question I have, is the Intel Core 2 Duo processor E7400 compatiable for my Compaq Presario computer motherboard?  I have never replaced or upgraded forever, and so I want to make sure I'm making the right decisions when buying upgrades.
  
  I would appreciate your help or you guys could give me advice.   Thank you and have a nice!

  Hello

  As you can see from the following link:

  http://support.HP.com/us-en/document/c01386897

  It supports Core 2 Duo E7xxx (Wolfdale-M) CPU means that it will support CPU E7400 but you must update the BIOS to make sure.

  Kind regards.

• Compaq Presario SR2009UK - upgrade Windows 7

  Dear all

  I have a Compaq Presario SR2000UK and am looking to upgrade to Windows 7

  This machine had Windows XP installed, but since the end of the Support I got in trouble, decided to upgrade to Windows 7.

  First of all, I updated the Bios on the Hp website 3.24 Version dated 2007-06-29

  Then using clean installed Windows 7 Ultimate 32 Bit SATA hard drive.

  Installation went perfectly with 2 partitions (reserved system & Operating system) windows implementation

  Once windows had started active device manager and all the drivers were like OK.

  Restart the computer several times since the Start button of windows without problem.

  Now comes the question

  What computer was off nights windows does not restart.

  1 press button and the bios blue screen power light, I hear the startup hard drive work then the screen goes black and turns on the windows logo, but after a second the screen flashes and blue bios screen on again once him lights up the screen Windows Recovery Manager saying computer failed to start and get the 2 options.

  1 Let's repair (recommended) windows

  2 start Windows normally

  Option 1 passes through the long process of repairing then windows starts.

  Option 2 tries to start windows but crashes before the color of windows logo appears.

  My other option is to restart, and then press F8 for advanced options, and then on starting in safe mode that work very well.

  Restart windows start button and the machine is in reverse OK until it is turned off for a few hours, then I'm back to the same problem.

  Have you checked the battery Cmos and is OK

  Think there may be a Bios problem but couldn't find any version after 3.24

  Thank you very much John

  Specifications:

  A look at the motherboard and I see at least 3 capacitors that are starting to develop at the top so that you can not see the cross in silver leaf.

  Try things during these days and the problem now is getting worse.

  Thanks for all your help and your will has now seek a cheap replacement card to match the processor and ram.

  Concerning

  John

• Compaq Presario SR5710F upgrade the video upon hearing the motherboard cannot handle high power supp

  What is the best graphics card upgrade which can my Compaq Presario SR5710F can support? I'm ready to upgrade the power also, but hear that the motherboard do not put anything above 350 watts regardless of power.

  You can install any PCIe x 16 video card you want. The limiting factor is going to be the power supply. More power the longer video card POWER supply. About what you hear about the motherboard, I found nothing to that effect. To qoute request-leo,' I heard a matter of concern that a power high power can somehow 'forcing' the power on the computer, resulting in overheating and burnout. Nothing could be further from the truth. A power supply provides power in response to the need; It does not matter where power grow. If your computer only needs 100 watts, then a 500 Watt power supply will only provide 100 watts. Why have a 500 Watt power supply? For the use of 'pic' (sometimes material will require 'sudden' power, as at the beginning upward or under heavy load) and for future expansion. »

  It is better to have too much power too littleand to get the right size. By that I mean the physical size - come in many standard sizes out there, and they are not interchangeable.

  Frank

• Compaq Presario CQ5500Y: Compaq Presario SSD upgrade

  Original 500 GB drive HARD shows signs of failure eminent.

  I cloned successfully the reader to a new 400 GB disk using NORTON GHOST.

  (I know this drive is smaller than the original, but less than 30GB was used on the original)

  Anyway, the new drive would not start.

  Assuming that the problem may come from the BONES associated with the license, I ordered all of the Compaq recovery disks.

  Meanwhile the recovery disk set arrive, I bought a 120 GB Sandisk SSD.

  (Again, I know that the 120 GB SSD is smaller than the original 500 GB HARD disc that came with the computer, but I do not plan to fill even 50%).

  Anyway, The Recovery Disc Set arrived and I tried to use it on the new 120 GB SSD Sandisk card.

  The process seems to be okay, all 3 discs of the series seem to copy and then the computer restarts and a screen displaying the files fly across the screen from one folder to the other stays there forever.

  I waited 15 hours and came back and I can still see:

  Fly across the screen, files from one folder to another folder.

  The drive activity light flashes, but of course, there is a problem.

  Some possible facts/related information:

  The SSD is detected in the BIOS.

  The good SSD checks, a "Smart" BIOS Diagnostics

  I can't find anywhere in the BIOS to disable the AHCI, it only shows SATA or IDE.

  Current Bios version is 5.5.5, and I couldn't find an updated BIOS anywhere.

  Current memory (RAM) is 4 GB (2x2gb), which was an upgrade because the machine was purchased.

  Can someone tell me please how to get beyond this problem?

  Greetings,

  I use the Paragon Professional Disk Imaging software.

  Try Macrium Reflect free. Disk cloning is also included in the free version.

  See you soon!