Present the button & matters of State Image

Similar Questions

• the button to add an image to a collection on my image went in the library module. How can I get that back?

  the button to add an image to a collection on my image went in the library module. How can I get that back?

  Press [J] to toggle the info of the image, then the gray appears on the preview image.

  

• can you put a line autour just the button to active state when you land on this page

  I have a site and I use a very subtle color for my active state. Can I put a line autour just the button to active state when you land on this page? I thought it would be useful to highlight the button without killing the color.

  Site = www.nelsonatnite.com

  Hi Nelson,.

  Yes, you can STROKE around the button of the active state. You must select the button, then go to the States, click on 'Active' and add STROKE.

  Kind regards

  Aish

• States of the button (up/down/over) image does not work properly.

  The pictures below show the button before and after flying. I work in Captivate 9 - responsive project

  Why pointed State does not automatically the same size as the 'low' and 'up' State?

  How can I fix?

  

  You can check the exact version number? There was a fix published, which gives the 8.0.0.230 version. That the problem has been solved with the fix:

  Hot fix | Adobe Captivate questions 9

  Why an image button and not a form button?

• If / then for the buttons to go to image tags?

  Hello.

  I plead for a hand-holding on this one. I hope I can explain this well enough.

  I have a complex that affects when rode on the playhead passes to label image textOut.

  When a deployment is executed, the playhead is to move the label image textIn.

  Pretty easy.

  mcBtnHome1.addEventListener(MouseEvent.ROLL_OVER, dropText);
  function dropText (evt:MouseEvent): void
  {
    mcBtnHome1.gotoAndPlay("textOut");
  }
  
   mcBtnHome1.addEventListener(MouseEvent.ROLL_OUT, raiseText);
  function raiseText (evt:MouseEvent): void
  {
     mcBtnHome1.gotoAndStop("textIn");
   }
  
  
  mcBtnHome1.addEventListener(MouseEvent.CLICK, landHome);
  function landHome (evt:MouseEvent): void
  {
    mcBtnHome1.gotoAndStop("textStay");
   }
  

  The problem occurs when I plug in the third event, click. I click the button, and the playhead moves to the label image textStay, as it is supposed to, but once I roll out / off the button, the action place is run again. Once I click on the button, no more interaction is supposed to be possible.

  This occurs despite my having a stop(); in the image of textStay action.

  I guess I need a If / then of if / else statements, with some true statements / false, but I have no idea as to what 'if' I should check for.

  In your click function, you can remove the listener ROLL_OUT, and then reassign when you arrive at your textStay framework.

  (Edit - in fact, you probably want to affect only the earpiece ROLL_OUT ROLL_OVER service at any time)

  mcBtnHome1.addEventListener (MouseEvent.ROLL_OVER, dropText);
  function dropText (evt:MouseEvent): void {}
  mcBtnHome1.addEventListener (MouseEvent.ROLL_OUT, raiseText);
  mcBtnHome1.gotoAndPlay ("textOut");
  }

  function raiseText (evt:MouseEvent): void {}
  mcBtnHome1.gotoAndStop ("textIn");
  }

  mcBtnHome1.addEventListener (MouseEvent.CLICK, landHome);
  function landHome (evt:MouseEvent): void {}
  mcBtnHome1.removeEventListener (MouseEvent.ROLL_OUT, raiseText);
  mcBtnHome1.gotoAndStop ("textStay");
  }

• Script to make the button stay on State hit until the other is clicked!

  Hello

  Got a little problem that I can't solve.

  I have a line of 5 buttons including each links to a different page. These buttons are currently in a clip.

  However, I would like to create an effect where when a user clicks on it remains highlighted. that is still on the State of success, until the user clicks one of the buttons.

  I would have thought it would be somethink that I could find online, but carnt seem to find anywhere.

  I found the code to make a point to stay on when you click on it, but it works on its own in the entire movie clip, so it has no effect when you click on other buttons on!

  Have tried the script below, but I'm sure that this will not work because it is not a link to the other buttons at all.

  on {(press)

  if (this ._currentframe == 1) {}
  this.gotoAndStop (2);
  { } else {}
  this.gotoAndStop (1);
  }
  }
  Thanks for any help!

  You are welcome.  Here is a slightly condensed version of the same thing...

  var lastBtnUsed;

  Btn1.onRelease = btn2.onRelease = btn3.onRelease = btn4.onRelease = function() {}
  processBtns (this);
  }

  function processBtns (newBtn) {}
  If (lastBtnUsed! = null & lastBtnUsed! = newBtn) {}
  lastBtnUsed.gotoAndStop (1);
  }
  lastBtnUsed = newBtn;
  newBtn.gotoAndStop (2);
  }

• The button States - Plus, upwards and downwards.  How to show?

  This morning, I attended a Webinar from our Adobe friends Bangalore.  It was a good presentation and made me think of the button States. The instructor said that you need to create 3 States of the button as separate the 3 images (no Flash) as (1) [buttonx] _up.png, (2) [buttonx] _over.png and (3) [buttonx] _down.png.  She said to put all 3 in your library, but only pointing to [buttonx] _up.png in the properties panel. She said that Cp would have automatically come back on the other 2 States. I tried a preview and do not have the States to show. Admittedly, I have not yet published.  Someone out there with experience with the States of the button. Am I missing something?  I would also like to build files in the components Panel (as one of the buttons - is an improvement to ask?)

  You may have misunderstood what the person of Adobe, or they may have used the wrong word wrong.

  You do not put the files button in the Captivate library. You add them to the Gallery button to:

  C:\Program Files\Adobe\Adobe Captivate 5\Gallery\Buttons

  or on 64-bit computers to:

  C:\Program Files (x 86) \Adobe\Adobe Captivate 5\Gallery\Buttons

  Then, they appear classified among the buttons available in your image buttons drop down.  Captivate shows only one of the images but uses all three.

• Structure of the event in a state machine

  Hi all

  I have a state machine with a sort of stand-by, where a user can select the next button state. I tried using a structure of the event with changing the values to select the next case, but when the state machine is in a specific case and the button of another State on the blocks of all things. I've attached an example, the lights simply stating that you are in the State.

  Thx for your time,

  Bert

  Edit: actually, I miss-clicked

  1. you have not need a while loop around the structure of your event.  With no wired time-out, you will never get a timeout event.

  2. your button events are set to 'Lock Front Panel until end of the event'.  Uncheck the box which.

• How to align a picture icon in the middle of the button

  Hi team,

  Jdev - 12.1.2.0.0

  I have a requirement in which I want to align the image of the icon in the middle of the key.

  I use the button and the button I display icon image. But when my page goes, images of icon in left side of the button. That I don't want.

  I want to place the image using the button icon.

  Code: -.

  < af:button id = icon = "#{pageFlowScope.troubleshootingManagerBean.nodeStatusImagePath"b11"} '"

  inlineStyle = "width: 225px; color: #434343;     border-color: #bfbfbf;     border-style: solid;     border-width: 1px;     height: 24 PX. "iconPosition ="bottom ".

  Disabled = "#{pageFlowScope.troubleshootingManagerBean.disableNodeStatus}" >

  < af:showPopupBehavior popupId = "nodePopUp" triggerType = 'sender' align = 'endBefore.

  Disabled = "#{pageFlowScope.troubleshootingManagerBean.nodeStatus eq"Red"?" {'false': 'true'} "/ >"

  < / af:button >

  Could you please help me achieve this goal.

  Thank you

  Céline

  Hello

  With the help of inlineStyle is not a good practice. Why not use the counting?

  Try this css for the button and it should work fine.

  AF | button {}

  Width: 225px;

  color: #434343;

  border-color: #bfbfbf;

  border-style: solid;

  border-width: 1px;

  height: 24 PX.

  vertical-align: middle;

  text-align: center;

  }

  Arun-

• Problems with the buttons

  Hi everone,

  How can I do what I want a button allows to observe other color for example after clicking. But I don't want that if someone click on it to change the color, but as long as no other button is clicked the color should be modified.

  It's somehow possible? I tried to give a multi-state object, which must be visible when we click on the button above the button but the button is not clickable because is not face-to-face.

  Thank you.

  If you want to change the button when a State is selected? I think you can only do in DPS.

• Need to disable the button until all the elements of the array was posted

  Hello

  I get a lot of help from this Forum, thought about getting more out of it. I am very new to AS3 and to do my best to get as much as I can that are still a few problems to come through.

  I am trying to disable the button on a specific image until all the Clips of film in a table are bieng is displayed, otherwise it should show another clip from movie plurarite the message that all video Clips are not displayed.

  Here's the scenario-

  SUMMARY.

  There are three buttons on the stage, the next image button, button to load the 1st Movie Clip (note1), button to load the second film Clip (note2)

  I'm counting the Clips of film with the length of the array (I don't know if I'm doing things), but the idea is that once all the video clips are loaded, next picture button must be activated in the case otherwise he must remain inactive, rather would display another clip of film as notice that all Clips are not loaded)

  Here is my Code.

  import flash.events.MouseEvent;

  btnnxt.mouseEnabled = false;

  var note1:Mc_Notice1 = new Mc_Notice1;

  var note2:Mc_Notice2 = new Mc_Notice2;

  function next(Event:MouseEvent):void

  {

  if(Count.Length == 2)

  {

  btnnxt.mouseEnabled = true;

  nextFrame();

  trace ("mouse is on");

  }

  else {}

  btnnxt.mouseEnabled = false;

  }

  }

  notes of the var: Array = [note1, note 2, note3];

  var numbers: Array = new Array();

  btnnxt.addEventListener (MouseEvent.CLICK, next);

  btnload1.addEventListener (MouseEvent.CLICK, hearings1);

  btnload2.addEventListener (MouseEvent.CLICK, load2);

  function load1(Event:MouseEvent):void

  {

  addChild (notes [0]);

  Notes [0] .x = 100;

  Notes [0] there = 100;

  Count.push (1);

  trace ('Count' + count.length);

  }

  function load2(Event:MouseEvent):void {}

  addChild (notes [1]);

  Notes [0] .x = 100;

  Notes [0] there = 100;

  Count.push (1);

  trace (counting);

  count0 = 1;

  trace (count.length);

  }

  Please help in fixing this error that I do not receive the required results.

  Help, please.

  Best regards

  Part of the problem is that you try to count by clicking a disabled button to activate this button.  As long as the button is disabled you can not use it for himself.  Instead of adding an event listener to btnnxt immediately, just assign it when it is ready to be used.  Whenever you load you need to check the value of the counter and if it is equal to 2, then you can assign the event listener for the btnnxt.

  You do not have a (County) table for that since you're using only its length property... a simple integer value will suffice.

  As I do not see you create a variable named note3, you probably get an error for this.

  In your function load2 you always aim the remark 1 placement where it should be placed.

• How to call the stored procedure when I press the button

  Hello
  
  I want to know how to call the procedure/SQL statement when I press the button using callable statement.
  
  can someone give me it please link who knows the steps to do this.
  
  Thanks in advance,
  SAN

  Hello

  read this good example http://www.baigzeeshan.com/2010/05/calling-plsql-procedure-and-function-in.html

  ~ Abhijit

• State of the button does not

  Creates a button that has worked fine the first download.  slightly modified its size and now States have stopped working.  It's back to the top at the bottom of the page:

  Cakes for weddings, birthdays, events | The Cakery - Bristol Tea Cup

  The button above, it works fine.

  any help much appreciated.

  I had for some reason any two images of background on one of the button States. Click on remove the background and it worked perfectly.

  Thanks to ankushr40215001

• To DEVELOP the image don't copy not from before to after when you use the buttons in the taskbar below.

  In Lightroom, DEVELOP the image does not copy from before to after after using the buttons below.

  Is it possible LR shows before and after the same?

  By clicking on a button with >< can="" make="" them="" the="">

  

  You can reset the State 'Before' of a picture by right-clicking on a stage in the history panel.

  

  Press the [\] to also get a 'before '.

• States of the buttons in Captivate 7

  Hello

  This may seem a stupid question. Believe me, I'm frustrated that I can't understand it myself. I'm new to Captivate and I am trying to create a button that has a rollover State. I managed to insert the button and style and the way I'd like, but I can not find the property settings to create different States.

  Is it not possible in 7 Captivate?

  Thank you!

  Tim

  Hi Tim

  If you do, use an Image button. You create three different images to use. One for the natural state, one for wriggle on and one for clicked.

  Regarder watch in the properties of the button object, then make sure that the type is set to Image. Then you will see the images. There is also an icon of navigation file that you can use which will open the location of the existing images. This will help identify the naming convention that you must use if you use custom images.

  See you soon... Rick