Presentation of IOS to itms-error-90086
I usually create IOS applications with phonegap and submit with the Application Loader on Itunes. But today when I tried it again, but an error occurred with the following message 'error-ITMS-90086 missing 64-medium '. I searched on the web and all the solutions refer to Xcode configuration. But I do not use XCode, I looked on the config xml and it seems that everything is fine. Someone with the same problem? Someone knows the solution?
Thank you
OK I've updated OSX from Yosemite and the 3.1 Application Loader and it worked!
Link for the 3.1 Application Loader
Thanks to all for cooperate!
Tags: PhoneGap
Similar Questions
-
Hello
I tried to build my GitHub repository with the PhoneGap Build based cloud. The Android and Windows builds seem ok, but the Build iOS is in error. There is no newspaper and making a little bulky diagnosis. Any ideas why I get an error?
Thank you!
State of the Service of Build PhoneGap said all builds are declining.
-
Suddenly, today, three of my colleagues around the United States with Presenter 7 licenses can no longer save PowerPoint files or work with presenter. Each of us has created courses successfully last week.
We all get the message 'unexpected error', tells us to "try to save your work in a new file, and then restart PowerPoint.» If the problem persists, consult the help section... "We get the message even if we do is type a word on a slide, and try to save the file.
We cannot open the host help menu... the same error message.
So now, we can not save a PowerPoint file. We cannot save a file in presenter. We cannot save or import audio data to the presenter. No matter what you click on the toolbar of the presenter, we get the same error message. Nothing works.
Help!
The updater you will get only 7.0.6. 7.0.7 was a major update, which took the presenter of an application from AS2 to AS3 application. I recommend to perform the process of update for 7.0.7, because it is 'necessary' to use with Connect 8.1 and newer. Published presentations wit 7.0.6 and older should work well.
The 7.0.7 update process can be found here: http://helpx.adobe.com/presenter.html
There is a link to download the updates of product, where you can get the installer for 7.0.7.
There are also instructions for upgrading to 7.0.7 as a stand-alone application or as part of a Suite.
-
upgrade to ios 9.3 error
I have an iphone 6 and before the error 53, today I tried to update to ios 9.3 and get an error, I don't want to do the update with the cause of the computer I'm afraid that my iphone will get again in brick, so I'm hopping apple realizes issue and lay down once more.
Hello.
Since it is a new operating system, it may have some bugs. You may need to wait until all the bugs get sorted to download.
Matt
-
Hello
I have an application on the Appstore as 2 years.
On iOS10 my application does not. Cannot connect to http links.
I have debug and get error of connections:
#2044 Error: unhandled ioError:. text = Error #2032: error in workflow. URL: http://api.website.net/check.php
I used HTTPStatusEvent.HTTP_STATUS to understand any solution, it gives 0
Please help me solve this problem.
MY CODE:
var urlReq:URLRequest = new URLRequest ("http://api.website.net/check.php" "); urlReq.method = URLRequestMethod.POST; var urlVars:URLVariables = new URLVariables(); urlVars.user_id = Main.instance.userID; urlReq.data = urlVars;
var loader: URLLoader = new URLLoader (urlReq);
loader.addEventListener (Event.COMPLETE, onCreditComplete);
loader.addEventListener (HTTPStatusEvent.HTTP_RESPONSE_STATUS, httpStatusHandler);
loader.addEventListener (HTTPStatusEvent.HTTP_STATUS, httpStatusHandler);
loader.dataFormat = pouvez;
Loader.Load (urlReq);
Hi, Efe,
I tried to launch the project fla that you shared with me on DropBox.
We looked at it more and figured out that your app.xml file does not contain the tags below which is necessary to enable streaming of on iOS http URL:
Please add under the labels under the tag
NSAppTransportSecurity NSAllowsArbitraryLoads I tested it on my end, and now it works very well on iOS9 and iOS 10.
Thank you
Adobe AIR Team
-
ADF Mobile: presentation of iOS because of itunes
For the distribution of my application for the objective test beta I downloaded it via the Application Loader.
In a few minutes I got the email from apple put my app in invalid state. The errors are as below. Please tell us how to fix them. I have used JDEV 11.1.2.3.4 to build the application
Invalid package structure - the binary file 'AAR.app/lib/libdt_socket.so' is not allowed. Your application can contain only one executable file. Refer to the Bundle Programming Guide for more information on the structure of iOS app bundle.
Invalid package structure - the binary file 'AAR.app/lib/libjava_crw_demo.so' is not allowed. Your application can contain only one executable file. Refer to the Bundle Programming Guide for more information on the structure of iOS app bundle.
Invalid package structure - the binary file 'AAR.app/lib/libprofilerinterface.so' is not allowed. Your application can contain only one executable file. Refer to the Bundle Programming Guide for more information on the structure of iOS app bundle.
Invalid package structure - the binary file 'AAR.app/lib/libjvmtihprof.so' is not allowed. Your application can contain only one executable file. Refer to the Bundle Programming Guide for more information on the structure of iOS app bundle.
Invalid package structure - the binary file 'AAR.app/lib/profiler/lib/deployed/cvm/libprofilerinterface.so' is not allowed. Your application can contain only one executable file. Refer to the Bundle Programming Guide for more information on the structure of iOS app bundle.
Invalid package structure - the binary file 'AAR.app/lib/libjdwp.so' is not allowed. Your application can contain only one executable file. Refer to the Bundle Programming Guide for more information on the structure of iOS app bundle.
This may be caused by the following:
(1) try to post an application in debug mode. Check in your iOS deploy profile that the application is configured to be in release mode.
(2) even if you did step 1, you must do a clean up before you deploy your application. If you have previously deployed a debug version, there is that flying over the entries will be picked up by the generation unless clean you it first.
Please try these steps and let us know.
-
Adobe Air for iOS - SQLError: ' #3115 error ' no such table ".
I'm developing Adobe Air application for iOS with sqlite on that. When running on my local machine, it worked like charm (add, edit and delete). Unfortunately, when tried to run on the iPAD, it gives me the following error:
SQLError: Details ' Error #3115',:' no such table: ' tblEmploye ", operation: 'run', detailID:"2013".
Here is my code when opening the sqlite database: * data is saved to the directory of the current application where all the files are stored:
exampleDBFile = File.documentsDirectory.resolvePath("mydb.db"); if (exampleDBFile==null || !exampleDBFile.exists) { MovieClip(root).mcSong.visible = false; MovieClip(root).mcAlert.visible = true; MovieClip(root).mcAlert.enabled = true; MovieClip(root).mcAlert.txtErrorMessage.text = "Database not found"; } exampleDB = new SQLConnection(); exampleDB.addEventListener(SQLEvent.OPEN, onExampleDBOpened); exampleDB.addEventListener(SQLErrorEvent.ERROR, onExampleDBError); //exampleDB.openAsync(exampleDBFile); exampleDB.open(exampleDBFile);
I also tried to use the following but still no luck
exampleDBFile = File.applicationDirectory.resolvePath("mydb.db");
using this, I get a different error: Error: Error #3104
And here is the code for adding new entries
sqlInsert = "insert into tblLyrics (empName, empDesc) values ('"+ strReplace(txtSearchMe.text, "'", "") + "','"+ strReplace(txtContent.text,"'","") +"')"; dbStatement.text = sqlInsert; dbStatement.addEventListener(SQLEvent.RESULT, onDBStatementInsertResult); dbStatement.execute();
Hoping for your advice...
Hello
@uxavenue
to add something to the post of samia:
-on iOS your application directory is in 'read only' (at least when using native application)-so resources in the application directory (in the terminology of the Air - not iOS SDK SDK) may not be changed/written/updated
-you could ship already created database sqlite with your application files, but must be copied to the writable to the application directory - for example documents. This directory is accessible via:
File.documentsDirectory
-When your application starts, you could do more:
(1) build the path to the path of database documents
(2) check if the database in this path exists (if this file exists)
(3) if the file does not exist yet either copy in this path of the resource directory of the application (where you consolidate during the generation of project) OR create the new empty database using all these CREATE table and then INSERT statements required to create the new new copy of database
(4) on each next start so check if the file exists at #2 jump creation/copy of database and simply start using it.
Kind regards
Peter
-
Please, can you help me. I am trying to transfer my music from my file to my USB stick but he always error apears writes that no longer located in c:\users\... Check the location of the item and try again. At the top of it, my usb device does not work, when I plug it into my lap top... it wants to format usb but I already formated it befor
It's two separate problems. Us; LL try to address each.
For USB, is there a reason you cannot format (is there any data on this subject, you don't want to lose)? Maybe you can copy the data to a temporary folder on your PC and let the format of the USB system, even if it is already formatted. I hope that this will be a thing of the time and does not ask you to format whenever paste you it into the machine (then we will need to verify your system files for corruption or check the USB for corruption).
For music files, C:\Users\
\Music visit and see what's there. Can you double-click on a song and play? If so, select the songs you want to copy and right click and click on copy. Then move to the USB drive and right click and select Paste. If she do not copy files, but they will play then I'll be very confusing because it is obviously able to see them. Let me know. If you still cannot copy and paste the music, then we will check some of your system files:
Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.
Type sfc/scannow, go and let it run. It will scan and try to correct some of your system files. If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.
While in the command prompt, type chkdsk /f /r and enter and let it run. It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.
If that is not working, then please post repetitive errors in Event Viewer on the copy or paste functions (Start / Control Panel / administrative tools / Event Viewer). Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.
If this does not work (or if SFC found corrupted files), we will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or you can borrow from someone). Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884. Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work. You can have a lot of updates to re - install (including all you need to remove service packs). If the version of the system came with SP1 or SP2 preinstalled and the disc is an earlier version, then you will need to make a record of slipstream as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.
I hope one of these procedures can solve your problem. If this isn't the case, after return and we will try something else. Return message anyway so we know how it turns out.
Good luck!
Lorien - a - MCSE/MCSA/network + / A +.
-
When I try to add my .bar file, I get this error:
File bundle (MyAppName.bar) was rejected. Package ID is required for all .bar file. If this is an upgrade, ID of Package must match ID of Package in the bundle of original file.
How to solve this problem?
I figured out that "ID of Package" is the version code you specify in the manifest file. I made sure that these were the same and it worked. Thanks for the reply...
-
presentation of iOS app from AppStore - certificate of Distribution?
I finished developing the first version of my iOS app and continued to fill all the holdouts not in Itunes Connect and started to download my application through the AppLoader mac operating system. Which therefore found that the problem is that my application which was published in Adobe Flash Proffesional 6 has been set up under a certificate of development (in the deployment tab) and not a certificate necessary to publish to the App Store distribution. I have generated such a certificate on a Mac, and tried to use it in my project through Flash 6 on my PC, however, a password is required to publish the application.
I have several questions about this:
(1) is there a way to generate a certificate of distribution on my PC (and not via a mac)?
(2) these certificates of distribution are the extensions .cer - FLASH, you are prompted to find the certificates .p12.
(3) if I use the distribution certificate created in my project on my Windows PC mac computer, where I can understand the password it asks me to enter?
This is a very frustrating issue, Adobe if you can download a tutorial of Distribution for publication on App Store that would help people struggling with the same problem... There are currently only a tutorial on how to create a development .p12 certificate...
Thank you
Roy
1. Yes, but it is much more difficult to do it on a mac. in fact, I think that you will have to emulate a mac to do.
2. When you create your .p12 file in Keychain Access, you enter a password. (there is no reason to use a different password for the development and distribution).
- Go to the https://developer.apple.com/devcenter/ios/index.action using a Mac or Mac Virtual PC
- Log-in.
- Click on the iOS Dev Center.
- Click iOS Provisioning Portal link. (See Fig08-04).
- Click certificates in the left panel.
- Click the Distribution tab in the right panel.
- Click on the certificate request button in the right panel.
- Follow the instructions to create your distribution certificate using Keychain Access. (See fig. 08-05) Apple has some easy to follow instructions to create a signature that is used to create your certificate. The steps needed to create a Certificate Signing Request appear in the right panel after step 7. The only part that I come across is when you are prompted to open the Certificate Wizard. You will find it in the top left of your Mac after clicking on the Keychain Access, not in the Keychain Access window.
- The right panel change and to show that your certificate is waiting for deliverance. Refresh the page and you should see that your certificate and reading by download. (See Fig08-06).
- Download your ios_distribution.cer by clicking on the download button.
- Download an AppleWWDRCA.cer by clicking on the "* If you do not have the WWDR intermediate certificate installed, click here to download it right now." link.
- Open both files in Keychain Access (using the login keychain).
- Right click of your private key in Keychain Access (you may need to expand the iPhone Developer certificate in your Keychain Access window) and click Export. Make sure that the file format is the exchange of personal information (.p12) and click Save. You will be prompted for a password that you must remember. You will use this password whenever you publish an iOS game and you will use your .p12 (certificate distribution) file for all the apps/games that you distribute (until your certificate expires and you pay another $99 and do again).
-
When I compile my app for IOS, the following error message is displayed "Oh geez.» Your generation has failed. Sorry, but there is a problem on the build server'.» For android compile fine
You should not have this plugin. It's probably the cause of the problem.
If you always use the repo of old, obsolete bmp for older versions of the plugins (e.g. org.apache.xxxx), you must replace them immediately with the latest versions of the plugins of the NPM. They are named differently (for example cordova-plugin-xxxx).
See the Docs to build Phonegap for more information and to find these plugins on the Plugin Search - Apache Cordova
-
Error when access to presentation Services
Hello
I installed OBIEE 10.1.3.4.0, the installation is successful, I can see examples of RPD files and the configuration file to the desired location.
When I try to access the Services 'presentation', I get the following error:
--------
500 internal Server Error
OracleJSP: oracle.jsp.provider.JspCompileException:
Errors compiling:C:\OracleBI\oc4j_bi\j2ee\home\application-deployments\analytics\analytics\persistence\_pages\\_default.java
Could not create the Java virtual machine.
Error occurred during initialization of VM
Could not reserve enough space for lots of things
-----
Kindly advice.
Kind regards
JitendraHi friend
in the following link, you have the solution to your problem:
http://focusthread.com/blog/oracletraining/unable-to-start-OBIEE-em-console-giving-500-internal-server-error/Good luck
Kind regards. -
Error in saving in presentation Services
Hi all
I have a problem while opening a session on presentation services.
Server BI service stops she s on every time I try to connect to services presentation with one user other than Administrator and presentation Services survey the following error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 12010] Communication connection to the remote end point error: address = *; port = 9703. (HY000).
RPD is configured for LDAP external authentication, so I only have the user 'Administrator' in my RPD and all users are stored in the LDAP server.
This problem only occurs when I set up this OBIEE server for clustering.
When it is not configured for clustering, LDAP authentiacation takes place without any problem.
Contents of the journal of NQServer.log is as follows: *
[nQSError: 13011] Request for block initialization 'LDAP_Authentication' failed.
Contents of the journal of sawlog0.log is as follows: *
Type: error
Severity: 40
Time: Sun Sep 25 15:33:29 2009
File: project/webodbcaccess/odbcconnectionimpl.cpp line: 371
Properties: ConnId-17, 17; ThreadID-46664592
Geographical area:
Saw.ODBC.Connection.Open
saw.connectionPool.getConnection
saw.threadPool
Saw.threads
ODBC driver returned an error (SQLDriverConnectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred.
[nQSError: 12010] Communication connection to the remote end point error: address = *; port = 9703. (HY000)
---------------------------------------
Type: error
Severity: 42
Time: Sun Sep 25 15:33:30 2009
File: project/webcomm/socket.cpp line: 892
Properties: ThreadID-34421648
Geographical area:
Saw.RPC.client.impl.Verify
saw.rpc.client.impl.initFixedRPC
Saw.RPC.client.cluster
Saw.threads
An error occurred during the execution of 'connect' Connection refused [Socket: 14]
---------------------------------------
According to the newspaper of errors in NQServer.log there is a problem with the query of this initialization block.
But the same initialization block works fine when OBIEE is not configured for clustering, it also works very well on other servers OBIEE.
According to the newspaper of errors in sawlog0.log, the problem is caused due to incorrect settings of communication DSN ODBC of Siebel Analytics or a bad Server installation.
I checked the odbc.ini file and it seems fine for me. Y at - it another way to verify communication DSN ODBC settings.
How can I solve this problem?
Thank you
DeepakHello
There is a problem with 10.1.3.4 OBIEE. (whem using LDAP from IBM)References
BUG: 7363517 -BI INTERNAL FAIL to STARTThey problem can be solved by setting LD_PRELOAD=/path/libibmldap.so
Here are the steps:
. his - init.sh
export LD_PRELOAD=/path/libibmldap.so -
A mini iPad, 2 or 3 yet update after that iOS 10 release?
With the release of iOS 10, may the iPad 2nd generation, 3rd generation and iPad Mini will not be able to upgrade to the new operating system. I was wondering if I want to restore or update my iPad in the future, Apple still will sign 9.3.5 for units not 10 supported iOS?
Right now apple always offers public versions past and present of iOS
-
Update error 9.3.5
Hi - I am trying to update my phone 9.3.5 but the screen on my phone says to connect to itunes. I do this and the download happens to 1.79 GB of 1.88 and then I get an error and I'm at square one. Please notify. My iphone is a useless brick. I can't restart even hard to get into the phone. How can I get my phone to be usable again?
Hello Klmk2,
Sorry to hear about the marketing updated iOS send you errors. If you could please follow this link: If iTunes does not your iPad, iPhone or iPod - Apple Support : it works for pc and Mac. Please reply here if you need help, or to get help thorough, 1-800-MY-APPLE.
Stormy
< published by host >
Maybe you are looking for
-
I get a Firefox error message that says, "something tries to trick Firefox by accepting a security update. Please contact your network provider and ask for help. "Do you know what is happening here - what could be the problem? (I have the latest vers
-
Satellite U300 - 15 p CD/DVD does not work after installing Win 7 64 bit
Hello guys... I have a portable Satellite U300 - 15 p with 4 GB of memory.I installed Windows 7 64 bit one mouth a go and after that, the DVD player does not work!Someone knows this problem? TKS This is the error SOFTWARE FOR DEVICE DRIVER HAS NOT BE
-
Cannot install kb2446708 (error 0 x 643)
original title: how to install kb2446708? UPDATE FAILED ERROR CODE 0 KB2446708 X 643 IM RUNNIG XP PRO ON AN INTERFACE VISTA INSTALLED COSTS. UPDATE IS AN UPDATE OF SAFETY FOR .NET FRAMEWORK 4, WHICH IS INSTALLED SINCE THE UPDATE COVERS XP, VISTA AND
-
Slow wireless connectivity with WRT54GS
If I connect to the router with a LAN, I get ~ 63Mbps, but whenever I try to go wireless, the speed goes down between 12-15Mbps (at best). There is no update of the firmware for the router, and I am at a loss to the extent where how to get the best s
-
Need to H - P eqv. p/n for Intel Centrino 1030 N WLAN/Bluetooth Mini-PCIe combo
I think that this card could be used possibly in the current dv4t-4000 / CTO LJ022AV The card Ralink my dm1-3000 is a 1 x 1 card NETWORK & not enough fast to stream video unless practically sitting on top of the router... Been said can not use the N