presentation of the State - side by side data sets

Similar Questions

• How Suprass a presentation of the State when there is no data

  Hello community,
  
  I have a Sql query that gives me the list of the pretreatments that does not have the corresponding post processing
  
  Sometimes this query returns no rows
  
  At this time is there a way I can suprass the the whole layout of the printing of the report
  
  I use oracle reports 6i
  
  Please help me!

  Create a column of synthesis (say "CS_TotalRecords") at the level of the report and set the following properties:

  Function: County
  Source: column that cannot be null (if the report displays data)
  Reset to: report

  Create a format trigger frame to the outside (all the object in this and the image you want to hide) and write the following code:

  BEGIN
  IF NVL(:CS_TotalRecords,0) = 0 THEN
  RETURN (FALSE);
  END IF;

  RETURN (TRUE);

  END;

  I hope this helps.

• Presentation of the State

  I'm new to Builder, I have a relationship with a frame that prints about half of each page that is correct. I had to add a frame with the addresses of employees, and at first the header printed on the 1st page of the report, and then on the second page with the address below. I changed the report that is printed only on the first page and not on the address, but it seems that the busy header space is always there just empty. I need to print the address at the top of page 2, but no matter what I do, it prints in the middle. Everything must be in the repeating group, because the report is run for approximately 4000 employees. Does anyone have advice?
  
  Thank you
  Roald

  Hazit Roald

  Have you changed the frame/repeat frame in question of the property of vertical to the Variable elasticity or the contract.

  When you check/change every frames properties one by one, make sure you have a copy of the previous version before proceeding with the next change because you could save yourself a headache trying to solve the problems of presentation, that you may cause.

  See you soon
  Q

• Presentation of the State - down, then across

  Is it possible to create a report layout which is down then across
  
  For example
  
  Row1_Col1 Row2_Col1 Row3_Col1
  Row1_Col2 Row2_Col2 Row3_Col2
  Row1_Col3 Row2_Col3 Row3_Col3
  
  Thank you
  
  Paul

  Hi Paul,.

  Yes, it is possible to do: [http://apex.oracle.com/pls/otn/f?p=267:92] (there is a version very, very, basis, just to give you an idea - of course, a style more should be done so he can watch directly on your page)

  This is done using a report model "Named column (model line).

  For this example, I have a new model report "Named column (model line)", the following parameters:

  Model line 1:

  <td class="t18Data">#1#<br>#2#<br>#3#<br>#4#<br>#5#</td>
  

  Before the lines:

  <table cellpadding="0" border="0" cellspacing="0" summary="" class="t18Standard" id="#REGION_STATIC_ID#">
  <tr><td class="t18Data" style="font-weight:bold; background-color:silver">EMPNO<br>ENAME<br>JOB<br>SAL<br>COMM</td>
  

  After the lines:

  </tr></table>
  

  I hope this will give you an idea of what you can do. Note that I did not use pagination on the model settings - you can copy those of the report template if necessary Standard.

  Andy

• Cisco EX90: Unable to see the presentation of the end

  Hi all

  We have currently enrolled in CUCM EX90.

  Question:

  Scenario of

  1 when the EX90 will launch to share the presentation, from the other side, they were able to see the presentation that we shared.

  but in the far endpoint if they will start to share the presentation we can see their presentation and this is the only time wherever they are able to see our shared presentation.

  Conclusion: before we able to share the presentation at the other end, firstly they must commit to share their presentation we before they can see our presentation.

  Already checked the NaturalPresenter but according to audit it is already built in the EX90.

  My question is why the presentation works after end first start sharing their screen for us. But if we will undertake the first, they can't see our split screen.

  Receive your answer. Thank you!

  It will depend on the version of the software you; "re running on the EX90.

  Before TC7.0 EX90 Admin Guide says that, for a call SIP and the 5170-5177 5070-5077 UDP ports are used to connect BFCP (channel of submission).  From TC7.0 onwards, the BFCP port and the active control prefer to use dynamically ports the RTP port range.

  If a firewall blocks these ports, channel of submission will not be established and the presentation can be sent in the channel video main, which is probably why it seems to work when you call a bridge.

  Note: It is strongly recommended that you upgrade your version of software on your EX90 to TC7.3.6 to address many security vulnerabilities in earlier software releases.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• How to hide the status of «Transfer of data...» » ?

  I want to hide the State of «Transfer of data...» "that shows in the bottom left of the browser's screen because he is as dangerous as a flashing icon, from the ergonomic point of view.

  You can hide the pop-up messages for specific with userChrome.css code State if you still want to see links to the overview.

  Add code to the file userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  Customization files (interface) userChrome.css and userContent.css (Web sites) are located in the chrome folder in the user profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #statusbar-display[label^="Looking"] {display:none !important;}
  #statusbar-display[label^="Connect"] {display:none !important;}
  #statusbar-display[label^="Waiting"] {display:none !important;}
  #statusbar-display[label^="Transfer"] {display:none !important;}
  

• to increase the width of the presentation of the report

  Hello
  
  could someone guide me pls by increasing the size of the report in report generator inorder to accommodate more fields
  
  
  
  thanking in advance

  Hello
  If you have already increased the size of the range of the property from the main section. Then just go to the SECTION layout and use MARGIN EDIT button since the last second top toolbar button before the help button. Then increase the size of the line frame "BOLD". Then close the line edit section and see if the size of your presentation of the State has increased.

  -Clément

• presentation of the homescreen - naming file has no

  Hello

  I found a problem in Apple Configurator 2.2 step-by-step

  (1) "edit Blueprints" by clicking the button of Blueprints

  (2) right click the master plan and choose "Edit-> presentation of the home screen. »

  (3) set up a few Apps and a dossier, rename this folder... can be of type "APPLE."

  4) click 'apply '.

  (5) try again step 2, you will see that the folder name is always the same.

  Someone at - he saw the same thing?

  iPad 2 Air, iOS 9.3.1 AC2.2

  Before Apple fix this problem, I found another way to do this.

  Use OS X Server and open the Profile Manager.

  Pick up an iPad and enrolled in OS X Server

  Create the "Home Screen Layout" parameter by setting in profile.

  Download this profile setting and using Apple Configurator 2.2 to install this profile to the Machine.

  This work!

• How to calculate daily, hourly average for the very large data set?

  Some_Timestamp	"Parameter1"	Parameter2
  1 JANUARY 2015 02:00. 00:000000 AM - 07:00	2341.4534	676341.4534
  1 JANUARY 2015 02:00. 01:000000 AM - 07:00	2341.4533	676341.3
  1 JANUARY 2015 03:04. 01:000000 PM - 07:00	5332.3533	676341.53
  1 JANUARY 2015 03:00. 01:000046 PM - 07:00	23.34	36434.4345
  JANUARY 2, 2015 05:06.01:000236 AM - 07:00	352.33	43543.4353
  JANUARY 2, 2015 09:00. 01:000026 AM - 07:00	234.45	3453.54
  3 FEBRUARY 2015 10:00. 01:000026 PM - 07:00	3423.353	4634.45
  FEBRUARY 4, 2015 11:08. 01:000026 AM - 07:00	324.35325	34534.53

  We have data as above a table and we want to calculate all the days, the hourly average for large data set (almost 100 million).  Is it possible to use the sql functions of analysis for better performance instead of the ordinary average and group of?  Or any other way better performance?

  Don't know if that works better, but instead of using to_char, you could use trunc. Try something like this:

  select
      trunc(some_timestamp,'DD'),
      avg(parameter1)
  from
     bigtable
  where
     some_timestamp between systimestamp-180 and systimestamp
  group by
     trunc(some_timestamp,'DD');
  

  Hope that helps,

  dhalek

• Presentation starts 5 "on the left side of the screen and shoot intellegence off-screen to the right.

  The top of my screen is normal: starts the toolbar 'File, Edit... '.

  The body of the screen during execution of Firefox - and as I type this message - is full of lite. The actual data: starting at the top of this page: "Firefox Help...". Request a new... ' etc. starts 5 1/4 in from the left of the page.

  It's as if Firefox had a larger page with the presentation moved to the right. This pushes the last normal, 5 "of the presentation off the screen.

  The end of the rite of the bar that starts with: http://www.mozilla.com/en-US/firefox/fx/

  is out of the page, for the facilities at the end of the rite are lost.

  Any presentation, including Amazon.com and Youtube.com are similarly pushed to the side of the rite of the 5 '' screen.

  I have no access to the rite more 5 "of any internet presentation.

  The sliders that up and down the presentation and the left / rite are off the screen.

  I shrunk the screen down so small, I can barely see the numbers: control panel\ display-settings-1920 by 1200. This gives the ILLUSION of the presentation, but still no centering sliders. With this setting, I can see the entire width of the Amazon. YouTube appears centered, with 4 1/4 "on both left and rite, but no edge sliders.

  I dropped the 'setting' of 1440 x 900.

  Lost about 3 "on the side of the Amazon rite; barely on the edge of the rite of Youtube.

  No local programming has a problem: Excel, photos, videos, Word, even Internet Explorer goes full page and centered.

  I uninstalled Firefox and downloaded fresh. He asked me to restart my computer, so I did not.

  I can provide photos (screenshots) of this phenomenon on request.

  -Open Firefox-> at the Menu help-> select "restart with disabled modules.

  Firefox closes, then it will open with Firefox comes from base. You can activate the Add-ons later. Check if its working.

• Yahoo's page cannot be opened properly, the data are clustered on the left side of the screen and do not work

  When opening Firefox, browser my Yahoo homepage is loading properly. It opens but data on the Yahoo page are all the cloged on the left side of the screen and do not see the data nor the icons of work, and I can not access any information or sites, do not respond or work the yahoo page...

  It takes place before, but within hours or the next day, it opens correctly withouth do nothing, but now does not work since yesterday.

  I have window XP

  Hello ajdf9, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• the presentation of the screen on my monitor is slightly off center with a thin black line on the left hand side. Ho can I fix this. I am running Windows 7 with a monitor Samsung SyncMaster SA10

  The presentation of the screen on my new monitor is slightly biased with a thin black line on the right hand side which makes it awkward hitting the back button on the upper left side of the screen. How can I adjust this?  I am running Windows 7 on a new Compaq PC with AMD Vision and monitor Samsung SyncMaster SA10.

  Any suggestions to adjust welcome.

  Thank you.

  The monitor must have menu on the side or the bottom buttons - in the find menu where you can adjust the horizontal position of the image.

  Increasing or decreasing the horizontal value will move the image left or right. When it is centered properly, you can exit the monitors.

• I am new to Adobe, I created an Excel file that I convert the file to PDF, but the converted PDF file shows all the data, missing on the right side of the page

  I am new to Adobe, I created an Excel file that I convert the file to PDF, but the converted PDF file shows all the data, missing on the right side of the page

  Hi Tony,.

  In Excel, click on the Acrobat toolbar, and then click Preferences.

  

  Now select the option 'Fit the worksheet to a single page' and click ok

  

  Now, try to convert and check.

  Kind regards

  Rave

• Only prints the left side of the page; If the envelope is present

  My printer prints half the page if left an envelope in present in the document.

  I've never been sure that the problem is the printer or the program.

  I just upgraded from MS Office 2007 to 2010 and it does not solve the problem, so it seems that the problem with my hp C309 AIO printer.

  Someone had this problem?

  Michael

  8.1 to win
  All-in-One is C309-s

  pcwizard wrote:

  Hi mikecox70,

  What happens if you print without an envelope making part of the document?

  What happens if you use Wordpad?

  To be honest with you, that sounds like the margins set for the envelope affects the entire document. You may need to separate the envelope in the document so that it can print correctly. Let me know what you find?

  If I do not include the envelope that the document prints normally.

  OK, before I answered that I opened a new document, established an envelope and added a line of text and print.  He printed perfectl

  In 2007, I tried reformatting the margins of envelopes, announcement issues, etc.  I'm not a novice and I know that Word allows the envelopes attached because I saved letters with envelopes for years.  I thought I tried everything in the book, including the upgrade! Apparently there was something in my master's letter that was wrong; Although while I was still in 2007 I did what I just did and nothing has changed.

  Go figure!  It works now and I will never understand why my past tries to fix it failed. but it is useless at this point.

  Thanks for responding (-):

• Z5C camera images blurred / more blurry on the left side

  Hello people!
  long story short: I bought a Z5C on the release date on the Sony store. I noticed a blur on the left side of the images ( imgur link ) so I went back to the Sony store. The staff said that he could go out blur on the sides, BUT that he should never be a back. So I got a new device and it suffered the same problem, but less important ( the 2nd Z5C photos ).

  The Reddit users other Z5C reported the same problem - so what happens on sony? If someone can look into this? I love this phone so much and it is so close to perfect!

  E1: these photo were borrowed from an another Z5C (3rd), I got my hands on at a local electronics storeE2: I received an official response by PM: "Yes, we had a few reports of it on the forum and it was sent internally for investigation. I have no news yet on what could be the cause and how it can be fixed though. "As soon as I do, I'll let you know." But now some bad news... There is a few photos of Z5 posted on reddit, which seems to have the same problem.

  E3: so far, no update to Sony if it is a hardware or software problem. It seems that only some devices are affected but nevertheless their quality control is not or they are gladly lemons expedition. I abandoned the dream of the Z5C and I lost my faith in Sony. Now we come to some interesting things that came in recent weeks
  * / u/abardall94 works in detail and verified 28 x Z5 / Z5C and found 4 defective devices (Source)

  * the problem of blur everything is less dominant, while 4:3 - funny how central android only shooting done 4:3 shots in their review... seriously?
  * But if you do 16:9 shots you notice the blur - authority android had a device that was hit... scroll 8-megapixel photos and look for the second image of the canon in their review
  * / u/dedbeats has the worst camera so far! Fun to be shipped to europe from the United States. Take a look-> normal picture / photo upside (Source)

  Now the big question is: the Z5P will be also problems of blur? Let's hope not...

  E4: Sony has major quality control problems. Maybe they have tried to overengineer the camera lens, but hit the fan. The customer support will probably help you. Better, you try to return your phone or sell when you can't stand blur problems. If you want to see how photos should appear on high-end phones, go to https://www.reddit.com/r/shotonandroid

  Greetings
  Veljin

  Good people, you'll really love this.

  I just received a response from the VAS of Fony Mobile Director UK and here are the results of the TEAM of Fony Mobile "SPECIALIST." Some details of the email have been published for obvious reasons.

  CerberusSco wrote:

  RE: Sony Xperia Contact Center Service request
  G * A * 22:15
  To: CerberusSco

  Dear CerberusSco,

  I want to thank you for your patience and collaboration allowing us to perform tests on your original handset.

  As advised by us has passed to the device to our test team of specialists who have undertaken a series of tests on the camera linked to the fault you have stated.

  The results that we have received in return confirms our original diagnosis that the camera performs in accordance with our expected performance settings. We appreciate that you have encountered problems with some images become blurred, but we believe this would be the result of a combination of conditions, object and settings rather than a problem with the device itself.

  BR

  G*** A****

  Sony mobile communications

  Legal action will now begin. I am now pondering my next move. To get an independent expert to look at this going to cost me an arm and a leg. I can be left without any luck, but to send my handset replacement back for repair and take advantage of my offer of suppliers of another handset from another manufacturer.

  

  Link to screen shot of Sony Mobile response