Prevent the unit to run off the screen

Similar Questions

• Prevents the screen turn off - G7X Mark II

  Hello!

  Is this possible on the G7X Mark II to prevent the disabling of the screen?

  I know that there are ways to prevent the stop for 3 minutes, but I am trying to record the screen of my camera to my computer for an indefinite amount of time and must be able to leave my camera "on and alert" when the total capture.

  I would try in a time record camera, but I can't find a way to remove the notification "Rec" of the screen, which can be removed during "sleep."

  Thanks for any help!

  Hi Bamrd,

  Thank you for taking the time to post.

  While the "Display off" option can be adjusted, it can not be disabled.

• Prevents the screen turn off (locked)

  The screen turns off after a short period, as configured in the settings. But sometimes this must be disabled by software, for example the navigation software should not leave the screen get black. (BlackBerry Maps seem to handle this...)

  There are other situations where it might be a good idea to leave the screen in Active mode, perhaps the media players (watch the video) and so on.

  The page settings of the device even informs me in the operative part of security/password on the fact, that applications could extend the time until that the device will be locked with password.

  But I can't find any documentation on how the two that can be made from code.

  What permission is needed and I have to call?

  Hello

  Copy the following code prevents the lock screen:

  #include 
  ...
  Application::instance()->mainWindow()->setScreenIdleMode(ScreenIdleMode::KeepAwake);
  

• How to prevent the screen to 'Jump' during a refresh of the report

  Hello.
  
  I use Apex 4.2.1 against Oracle 11 g 2 and mod_plsql.
  
  I created a page that contains two classic reports and an editable form as a table, with the form that need to be placed in the bottom of the page.
  
  The tabular presentation contains the usual buttons apex creates by default as 'Add a line', 'Save' and 'delete '.
  
  When users click one of these buttons, the entire page "jumps" and the mouse cursor goes at the top of the page. Very disconcerting, but also frustrating since users must constantly scroll where the form is to see if a line has been added or deleted.
  
  I put the region in the form of "Partial Page Refresh". No effect.
  
  I also created a dynamic action that is triggered by a click of a button (say the button "Add a line") and whose action is to refresh the specific region in table form. Once again, no effect.
  
  Even with both of these interventions, implemented individually as well as in the combination, always my page jump and the mouse pointer at the top of the page when users click one of these buttons for forms.
  
  Would you know how to prevent these screen "jump"?
  
  Thank you.
  
  Elijah

  1 change the title of the tabular form

  <a name ="TABULAR_FORM" ></a>Current Title
  

  2. create a branch for MULTI_ROW_DELETE AND SUBMIT (button ID) applications:

  f?p=&APP_ID.:&APP_PAGE_ID.:&SESSION.::&DEBUG.:::#TABULAR_FORM
  

  3 do the conditional branch by using PL/SQL query:

  :REQUEST IN ('SUBMIT','MULTI_ROW_DELETE')
  

  An example, which you can find here:

  http://Apex.Oracle.com/pls/Apex/f?p=31517:293

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Apress.com/9781430235125
  http://Apex.Oracle.com/pls/Apex/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• How to configure Acrobat DC to keep the screen on while reading the PDF?

  My phone is set to exit the screen after 30 seconds and lock automatically.

  While I read any PDF on Acrobat DC - screen turns off after 30 seconds.

  How can I set up Acrobat DC to keep the screen on continuously during I read any PDF file?

  Hello

  Have you tried to activate 'Screen brightness Lock' for the application Acrobat DC?

  For Acrobat DC for Android, the option is available in the app.  The action menu, and select settings > brightness screen lock.

  

  For Acrobat DC for iOS, the option is available in the iOS settings screen.  Go to settings > Adobe Acrobat and choose lock screen brightness.

  

  The option prevents the screen from dimming/turning off when Acrobat DC is running in the foreground, which in turn prevents your locking device.

  I hope this helps.

• Palm Treo Pro trouble: Windows media player passes each time the screen saver updated

  The treo Pro is an excellent application of low power consumption screensaver that displays date, time and info missed calls. However, the disappointment is that when you listen to music while in screen saver mode, windows media player ignores all the minutes when the clock on the screen saver updates / refreshes.

  Since the clock updates every minute, the player skips a beat with unerring accuracy.

  It's the solution to this problem. Please, do not respond to a 'solution' to disable the screen saver. I who have already tested and am aware of it. I don't want to disable the default screen saver.

  Agree. I discovered that letting Windows media player running on the screen prevents the screen saver from kicking in (which she does if the phone is on the screen today). The screen always shows the player running but will drive according to the configuration.

  With that, the problem is solved when I play music in a car, but it will be a pain when walking or jogging.

  So I guess the only solution is to disable the screen saver with a single operation... desire, I had an app for that!

• Dell XPS 17 702 X flicker of the screen

  I read everything I could the varrious formums and installed the drivers as much as I could, Nvida dell old and new, ancient and new, video intel old and new.  Nothing prevents the screen flickering on the battery power.

  I had the screen replaced by a dell technician, continues to blink.  The entire computer replaced and it still flashes!

  Someone at - it suggestions?  Seems that the pilots have no effect.  The only thing that works is to plug in the power adapter.  On battery, it sparkles.  I also have Nvidia to be all the time as well as the intel integrated video card without change. Technicians dell always change the power setting.  They seem obsessed with setting the screen for maximum performance on the intel integrated and the nvidea with no effect.

  Dell wants to send a new motherboard and screen.  I'm getting sick this.  The screen cannot be bad because it works on the current!  When you demand a refund?

  I like to keep it if it gets fixed I like it.

  I had the same problem of flickering on battery with my Dell XPS 702 X. After installing a new copy of Windows 7 on a new SDS drive with AG Full-HD 1080 p screen, I've updated all my drivers and use the bios A06.  That's when I saw the same problem you are having.  Since I don't see it on the old version, I searched the difference. My solution was to do a right click on the desktop and go to graphic properties and select the Advanced Mode. Click on the power tab, and then select Maximum Performance for both sector and battery.     Given that you have tried this and it did not fix the problem, you can have a bad screen.

• Prevent the screensaver and wake up from sleep

  Is there a way to "Cascades" to prevent the screen saver? I am also interested in waking up the device and disable the screensaver from code.

  There's this way to do natively:

  int idle_mode = SCREEN_IDLE_MODE_KEEP_AWAKE;
  screen_set_window_property_iv(screen_window,
      SCREEN_PROPERTY_IDLE_MODE, &idle_mode);
  

  But I hope that there is a more pleasant way to do likewise to the waterfalls or Qt?

  From my code here:

      onKeepAwakeChanged: {
          // This should be keepAwake ? ScreenIdleMode.KeepAwake : ScreenIdleMode.Normal
          // but the enum is broken in QML
          Application.mainWindow.screenIdleMode = keepAwake ? 1 : 0;
      }
  

  The comment may be outdated. If this isn't the case, of course use the enum instead of hard-coding the 1 and 0.

  You could do this in C++ too, where the enum will work certainly, but of course with a slightly different syntax.

• Stop the screen turn on mobile devices

  Hello guys,.

  I was wondering if you could help me. I am designing an app for tablets and I wish the app was only visible in the panoramic view.

  Is it possible to prevent the screen turn on mobile devices and perhaps view-panorama?

  Thank you!

  Bert

  I don't work on mobile applications or anything, but I guess you can try:

  in scene/orientationchange

  if(Window.orientation == 0) / / Portrait

  {

  Window.orientation == 1 / / landscape

  }

  and you can see #4 here:

  http://StackOverflow.com/questions/3501510/blocking-device-rotation-on-mobile-Web-pages

  or with css here:

  @media all and (orientation: landscape) { ... }

  Media - CSS queries using | DND

• Wait that click minimized the screen brightness

  How to use click box?  I guess I wanted to ' pause project until user clicks on ', but if I stop, reduces the brightness of the screen.  How can I prevent the screen from dimming and wait for click?  IF I do not select this option, it does not expect and goes to the next screen.  (I know - basic - but I'm a newbie - please forgive me)

  Hello

  Click the box object is a pause at the end of the time period. If you want to make a break earlier, set the end of the click occurs earlier on the slide area.

  Click on the image below for a larger and more detailed view.

  

  See you soon... Rick

  Useful and practical links Begin to learn Captivate 5 times now! $29.95 Captivate wish form/Bug report form Certified Adobe Captivate training SorcererStone blog Captivate eBooks

• Disable the ability for applications prevent turn off the screen and start screen saver

  Hello

  I need to disable the ability of application full screen to turn off the screen and start screen saver. Basically just need to it:

  When there is no entry in the application that is running in full-screen, I want to turn on the screen saver and turn off the display. As far as I know, the windows default settings is to prevent turning on the screen saver during modes full screen.

  Thanks for the reply

  Hello

  Thanks for posting your query in Microsoft Community.

  According to the description, I understand that you have related questions screen saver settings in Windows.

  A screen saver is a program that, including the screen or filling it with moving images or patterns when the computer is not in use.

  Screensaver programs were designed to help avoid these effects by automatically changing the images on the screen during periods of user inactivity.

  Windows uses photos that better match your monitor for locking screen slide show.

  For more information: See photos on the desktop, start and the lock screen

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• The effect of ICT controls runs off the screen and the chronology of control carried out does not follow

  I'm working on a video where I need to change the image very close key pairs. But it seems that ICT is running off the screen and does not follow along as the ICT in the project timeline.

  How can I make the effect controls, ICT and the timeline synch upward? I can use previous and next keyframes, but the view of the timeline does not follow along. He made the process quite slow editing because I have to constantly to the scroll box allows to adjust the view manually.

  There is no option for this scroll.  You will need to zoom out.

• the presentation of the screen on my monitor is slightly off center with a thin black line on the left hand side. Ho can I fix this. I am running Windows 7 with a monitor Samsung SyncMaster SA10

  The presentation of the screen on my new monitor is slightly biased with a thin black line on the right hand side which makes it awkward hitting the back button on the upper left side of the screen. How can I adjust this?  I am running Windows 7 on a new Compaq PC with AMD Vision and monitor Samsung SyncMaster SA10.

  Any suggestions to adjust welcome.

  Thank you.

  The monitor must have menu on the side or the bottom buttons - in the find menu where you can adjust the horizontal position of the image.

  Increasing or decreasing the horizontal value will move the image left or right. When it is centered properly, you can exit the monitors.

• Spry menu bar runs off the screen

  Is it possible to make a menu bar horizontal spry not positioned off the coast of the side/bottom of the screen? I make menus pretty long and being too unintelligent users because they don't realize that they need to scroll to see the rest of the menu.
  
  Here's the demo page: http://office.bdhtechnology.com/restrict/intranet.everydaychampions.org/test/test.php
  
  The main problem is the Admin-> policies-> path of the policy of the Administration of nursing care

  "bdhtechnology" wrote in message
  News:fafgt5$MTK$1@forums. Macromedia.com...
  > Is it possible to make a menu bar horizontal spry do not stand
  > off the
  > side/bottom of the screen? I get a few menus long enough and users
  > being
  > as unintelligent because they don't realize that they need to scroll to see the
  > rest
  > menu.
  >
  > Here's the demo page:
  > http://office.bdhtechnology.com/restrict/intranet.everydaychampions.org/test/tes
  > t.php
  >
  > The main problem is the Admin-> policies-> Nursing Administration policy
  > path

  This would require an edge detection routine in the script, as context Menu
  Magic:
  http://www.Projectseven.com/products/menusystems/PMM/css_tweaks/edge/

  You could ask Adobe if they can give you a dry the script for this.

  --
  Al Sparber - PVII
  http://www.Projectseven.com
  Dreamweaver extension - Nav Systems | Galleries | Widgets
  Authors: "42nd Street: Mastering the Art of CSS Design.

• power off after freezing of the screen

  any help is appreciated greatly. while cleaning my closet dell b110, the screen froze, cursor movement lie, mousee light went out, ctrl alt esc, nothing helped, could turn off, so I killed the power. end waited 15 min, then powerded. things seemed ok loadup, but noticed the programs does not normally. I restored back to two days, but still not right. any suggestions?

  Content from another thread related to this topic:

  relitive to my question posted a few minutes ago, when I ran my cclearner, he won at 23% on cookies or the trash. really need help ;>)

  I can't understand how a clean boot will help you, but don't give the idea of 'expert' Microsoft Support engineer a shot if that's your desire.

  If that you have on your system without stop stop OK, sometimes this can cause corruption in the filesystem NT (NTFS).

  If it was me, I could run a check disk with error correction and see what it finds / corrections.  If there is nothing to do, then you have another problem, but I would start with this first.

  Click Start, run and enter in the box:

  Chkdsk /r

  Click OK and answer in the affirmative to the question about running chkdsk at the next system startup, and then restart the system and chkdsk runs.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  When chkdsk runs automatically restart, the results appear in the case where the watcher Application
  Newspaper.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  Search the Application log for an event originally by Winlogon, something like:

  Event type: Information
  Event source: Winlogon
  Event category: no
  Event ID: 1001
  Description:
  Checking file system on C:
  The type of the file system is NTFS.

  A disk check has been programmed.
  Windows will now check the disk.

  CHKDSK checks Usn Journal...
  Audit of the USN Journal is complete.

  39070048 KB total disk space.
  25151976 KB in 78653 files.
  48256 KB in 10264 index.
  0 KB in bad sectors.
  237080 KB in use by the system.
  65536 KB occupied by the log file.
  13632736 KB available on disk.

  4 096 bytes in each allocation unit.
  9767512 total allocation on the drive units.
  3408184 allocation units available on disk.

  Windows has finished checking your disk.
  Please wait while your computer restarts.

  I prefer to run chkdsk /r from the XP Recovery Console so you can see what he does.

  You have a genuine XP bootable installation CD or you want to know how to make a bootable CD of XP (no XP media required) Recovery Console to run chkdsk /r from there?

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.