Preventing a frame Scrolling scrolling too far

Similar Questions

• Create a 1 page site - problems with the last section scrolling too far from scrolling

  I've created a 1 page site that works very well outside the final section, scrolling too far from scrolling. My site consists of a headr pinned, a footer pinned and 4 sections (defined by rectangles - each a 1011 pixels high). I used effects scroll to bring the items in and out.

  The site can be accessed here: Homepage

  The problem is with the contact us section, where you seem to be able to scroll further than the lower part.

  Here is my document, set the parameters:

  

  so my size is set on 4042 (although I've tried it with 4044-4 x 1011 - it makes no difference. When I click on the link to the contact section it seems fine, but I then seem to be able to scroll further down, and this seems dependent on the screen / the browser size. The problem is more pronounced with a smaller screen / browser size in height.

  I have tried everything I can think to do does not scroll beyond what it takes the anchor when I click the link, but whatever I do the problem seems to persist.

  I would welcome any suggestions on this and also General comments on the site. But help with the problem, first please.

  Thank you very much in advance - I'd be happy to publish the file of muse but can't seem to find a way to do it.

  Ian

  Hello iwatts3519,

  just make your master page longer. I don't have to correct the pixel length. This is a test and see option. Here is the corrected file:
  http://files-hh.Hirschen.de/_71isLr3WR8ABYR

• Why my layout of Tablet scrolls too far vertically?

  Develop the use of Muse v4.1, building 8, CL 774415 on OS 10.7.5

  Tests on the iPad 2, iOS version 6.1.3 in the built-in Safari browser

  I created a site with separate configurations for office, Tablet and phone. Layouts office and telephone work as expected, however the presentation of the Tablet allows the user to scroll down (vertically) further than the real depth of the page layout. Scrolling pages a good distance beyond the footer and the bottom of page defined in Muse, even markers when a page has a lower height of the browser window. This behavior is unexpected and not visually appealing.

  My tablet are properties of the Site: (note that this layout is designed for landscape, viewing on a Tablet)

  Page width: 1024 px

  Minimum size: 400 px (also tested with min height of 768, same results by default)

  Columns: 1

  Column width: 0

  Gutter: 0

  Set to zero for all other properties (margins and padding)

  There are 3 pages in my layout of the tablet. The properties on each page are defined exactly as the above Site Properties.

  A single master is applied to all 3 pages. Its structure is:

  Top of the Page, Y = 0 px

  Header, Y = 130 px

  Footer, Y = 500 px

  Bottom of the Page, Y = 530 px

  The bottom of the browser, Y = 530 px

  The only object in the page footer area is a single line of text, 17 pixels high.

  The content of the body of pages 1 and 2 create a height of last page of 750 px.

  The content of the body of the page 3 creates a last page of 460 px height.

  No object page extend below bottom of Page/bottom of markers of browser.

  The only information that I could find in the forums dealing with even remotely of this issue has been a post about how to hide the overflow through html style codes inserted in the header of each page (article: http://forums.adobe.com/message/4624992#4624992). I inserted this code in the Page Properties > metadata > HTML to the < head > area, but it does not change the scrolling behavior.

  Here is a link to the site. I can also provide the Muse source documents if someone would fix this bug.

  http://Blackdot.S3-website-us-East-1.amazonaws.com

  Thank you in advance.

  After looking through the "Properties of the Site", I unchecked "Sticky Footer" for tablets, and now the problem has been resolved.  I hope it helps you too!

  Here's a YouTube video, I did document the glitch and showing the fix...

• The wheel scrolled too far with one click

  I JUST INSTALLED THE 3500 WIRELESS MOUSE AND CAN'T SCROLL A FEW LINES AT A TIME WITHOUT USING THE SCROLL AUTO CAN ANYONE HELP PLEASE

  Some mice are going to configure the sensitivity of your mouse wheel. Check the software for your mouse to this context. You can find your software for the mouse settings in the Start Menu or by going to Control Panel-> mouse.

• Title scrolls too fast

  I'm on first Elements 9 and adds a title scroll in the menu title. When I play back the frame, the title scrolls too fast to read the credits. I lengthed the timeline in the timeline using the tool of time Scretch, but this just adds virgins pictures before and after the scrolling credits. Credits not only stretching and slow, scrolling at the same speed in a sandwich between the beginning and end of the empty frames. Any thoughts?

  Welcome to the Forum.

  Steve you given the method of increasing the duration of the title - just a click + drag on the tail, to get the necessary length. This will also slow down the animation title predefined Roll.

  If it still does not give you what you want, about the speed of the roll of the title, I suggest to remove this preset (it is easy to apply, but limited in the control) and instead of using the fixed effect > Motion > Position and Keyframing, which sets the effect manually create the roll. Steve nicely covers Keyframing in his tutorials Keyframing base to Muvipix.com. I highly recommend to go through this tutorial several part, the concept of keyframes can be intimidating to everything first, but all time spent to get in tune with them, will pay dividends over time. Keyframes can be applied to most of the effects, all two fixed or added.

  With the movement > Keyframs Position, we can control the speed of the roll, can pause, if you wish, and can then animate to roll offscreeen. Several effects can be touch-ups on the same title too.

  Although easy to apply, I don't remember the last time I used one of the animation Presets, because key frames offer an infinite control.

  Good luck and let us know if you have any questions about keyframes, after reading the tutorials of Steve.

  Hunt

• Layer mask to prevent students from going too far outside the head on atypical forms of head

  For example, a frog head straight research has plenty of space to just cover your students should I look too far. If some sort of code called mask would keep another layer of screening outside it would be awesome!

  Thanks for the request. Have a mask clipping support or equivalent to deal with students is something that we are considering. For now, you might be able to diminish the value of the parameter eye gaze strength (in the behavior of face) in order to reduce the distance.

• Is it possible to prevent or remedy to have too many files in the DCIM folder?

  Is it possible to prevent or remedy to have too many files in the DCIM folder?  In a group of friends, when you view folders DCIM iPhone in Windows 8, three of us have many, many files (such as 101APPLE, 327APPLE, 328APPLE).  Phones concerned: 5 c, 6: 6.  Some have only one photo per file, some files have just a few pictures.  In addition, two friends have files dated 1969.  I think everyone has the most current ioS. What is the cause and is at - it a way to overcome it?

  No, it isn't. The DCIM and its content was never for public use to shoot photos and videos.

  Here's the right way to go about it.

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

  If you want something more specific Windows, I suggest you watch here.

  http://Windows.Microsoft.com/en-us/Windows-8/import-photos-videos

• El Capitan too far?

  2011 MacBook Air.   2 GB OF RAM.   Always updated OS is up-to-date, but El Capitan seems too far.   Beach ball in Safari etc.

  Etresoft run suggest OF RAM.    If so, can I somehow return to Yosemite, which seems to work very well.   This MBAir has been completely problem free and realize time may be here to renew but short term a step backwards in the operating system would help if possible.   I did a check for bad things, but none here.   Then removed the verification tool to ensure that it was not slow me down.

  The system requirements for 10.10 and 10.11 are identical. 2 GB of RAM is pushing it. 2 GB is the strict minimum and may not be used for much in the view of many here.

  What "auditor" did you use?

• Icons are too far to the left on the allignment of monitor problem?

  The icons on the screen of the monitor are adjusted too far to the left.  If I could reach in and just move the entire screen an inch to the right, it would be good.  I asked a lot of people 'tech' and nobody seems to know how to solve this problem.  Any help would be appreciated.

  If only the icons are far to the left, you can simply drag-and - drop icons anywhere.

  If the entire screen, including the taskbar is far to the left, you can use the buttons on the monitor to adjust the size of the screen.

• Paper feeds too far into the printer so that the top inch of the print page is lost

  White sheets of paper flow too far into the printer. This causes the top of the page to print.

  Hi pilot6856,

  I'm sorry to hear that you're always having paper a bad diet with your OfficeJet 6500 a Plus. Please take a look at this video and follow the steps in troubleshooting for affected by frequent problems of power.

  There are a few crucial steps that need to be done, please let me know if that helps. I look forward to hearing from you soon.

  Thank you

• HP LaserJet P1102W: HP LaserJet P1102w prints 1/2 inch too far down on the page

  When I print with that printer using Word, it starts about a half inch of print down on the page.

  I tried to reset to factory settings, but it does not always work on me.

  Any help would be appreciated.

  Hi @2poodles2 ,.

  I see by your post that when you print from Word, printing is printing too far to the bottom of the page. I'd love to help you.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem. Select the method two.

  HP LaserJet Pro P1102 and P1106/P1108 Printer Series - printing a Configuration Page.

  You have this impression of question from other applications?

  If this isn't the case, it may be a margin setting in Word applications. Please check the margin settings.

  Make sure that the appropriate settings are defined in the properties of the printer and the application you are printing from.
  On the file menu in the software, click on print.
  Select the product, and then click Properties or preferences.
  Click the paper/quality tab.
  Check the Type of paper size, paper Source, paper, to ensure that they are correct.

  Try to print again.

  If you still have problems, copy the Word document and paste it into another program, such as Notepad, to see if you have the same results.

  What version of Word are you using?

  How is the printer connected? (USB, Ethernet, WiFi)

  If you appreciate my efforts, please click on the button below the thumbs up.

  Thank you. I look forward to hear from you.

• I used the snap, but went too far with the mouse that has placed the window out of view on the desktop. How I suddenly back

  I used the snap, but went too far with the mouse that has placed the window out of view on the desktop. How I suddenly back

  Try clicking on the Chrome icon & press f11 to maximize the screen.

  Kind regards

  Nicholas Lee Fagan

• HP photosmart 7510: alignment of the paper. When I print to my 7510 always prints too far to the right.

  When I print to my Hp photosmart, 7510, wheter be photos via AirPrint on. My IPhone or the Documentation of an environment of windows 7, or Mac os X or even my old windows xP it always prints too far to the right on the paper. This result s in all the text is visible. For photos of the result, is a white edge on the photo and cut off.

  I read manual and I have confidential amputeret that the paper is correctly placed. Else all works well, AirPrint and all absolutely no problem. updated to the last companies

  BECN, I saw this problem caused if ever there was a paper jam and something has filed in the mechanics of the printer. Here is a video on how to check for this:

  http://goo.GL/IDtwa

  Also, just to see if it is more than hardware/software partners, can you make a copy of the scanner and tell me how it turns out?

  Let me know!

• Scroll too fast on java applications

  After update to sierra applications that use java in my case Intellij or even the java Control Panel, have increased the speed of scrolling. I use the trackpad so I don't know if the problem occurs with a mouse too. I tried to slow down to a minimum on the accessibility implementation, but it had no effect on java applications. It became really difficult to work. Is there a new setting that I should do or perhaps a work around?

  This is a bug in the JDK: https://bugs.openjdk.java.net/browse/JDK-8166591

  Explanation:

  It looks like the JDK question and is reproducible with a JList with simple scrolling. Sierra generates many more events than El captain. These events contain values ~0.1 planned instead ~ 1. But Java converts these small number 1 in any case.

  There is no solution except wait that Oracle will fix it.

• Text and images disappear in overlays frame scrolling when you turn the iPad

  I'm having this problem:

  When I rotate from portrait to the horizontal, content scrolling frame iPad disappears, the same phenomenon occurs if the first view is horizontal to vertical.

  The names of levels of different content and images are different.

  The problem comes with the app Adobe Content Viewer of an iPad 3.2.1 version 3 with iOS beta 7 v.6 so that this does not happen on an iPad 1 with iOS 5.5.1 the file downloaded to the producer Folio folio is the same.

  Suggestions to solve this problem?

  Below is a short video showing the scrolling image, text and images disappear in two articles (but this happens in all pages)

  A fix for a nearly identical issue was released on 13 September. Did you rebuild the application and try again?