Why my layout of Tablet scrolls too far vertically?

Similar Questions

• Create a 1 page site - problems with the last section scrolling too far from scrolling

  I've created a 1 page site that works very well outside the final section, scrolling too far from scrolling. My site consists of a headr pinned, a footer pinned and 4 sections (defined by rectangles - each a 1011 pixels high). I used effects scroll to bring the items in and out.

  The site can be accessed here: Homepage

  The problem is with the contact us section, where you seem to be able to scroll further than the lower part.

  Here is my document, set the parameters:

  

  so my size is set on 4042 (although I've tried it with 4044-4 x 1011 - it makes no difference. When I click on the link to the contact section it seems fine, but I then seem to be able to scroll further down, and this seems dependent on the screen / the browser size. The problem is more pronounced with a smaller screen / browser size in height.

  I have tried everything I can think to do does not scroll beyond what it takes the anchor when I click the link, but whatever I do the problem seems to persist.

  I would welcome any suggestions on this and also General comments on the site. But help with the problem, first please.

  Thank you very much in advance - I'd be happy to publish the file of muse but can't seem to find a way to do it.

  Ian

  Hello iwatts3519,

  just make your master page longer. I don't have to correct the pixel length. This is a test and see option. Here is the corrected file:
  http://files-hh.Hirschen.de/_71isLr3WR8ABYR

• The wheel scrolled too far with one click

  I JUST INSTALLED THE 3500 WIRELESS MOUSE AND CAN'T SCROLL A FEW LINES AT A TIME WITHOUT USING THE SCROLL AUTO CAN ANYONE HELP PLEASE

  Some mice are going to configure the sensitivity of your mouse wheel. Check the software for your mouse to this context. You can find your software for the mouse settings in the Start Menu or by going to Control Panel-> mouse.

• Preventing a frame Scrolling scrolling too far

  I created my first image scrolling in Indesign CS6 PC. When I saw it he pulls up and stops at the perfect loacation. ID like to come back to its starting point when he scrolled down but it scrolls right behind the edge of the page. Is there a setting I'm missing?

  

  The settings are fine, but you want to ensure that your embedded content framework is in the start position exactly right. It should work. You can find examples and instructions in the issue of the advance of the superposition of DPS tips.

• Why the content of auto-scroll in Windows Explorer when you double-click an element?

  Why content (columns) to auto-scroll in Windows Explorer (on the left) when you double-click an element?  And how can you stop that?

  How to reproduce:

  -Open a Windows Explorer window
  -Big enough to be able to see the columns 2 and 3
  Double click on an element of the extreme right or the last column
  -All content automatically scrolls to the left so that the column of the element double you clicked is now in the first column of the window

  It is REALLY BORING because it causes bad clicks when it scrolls or to always click 4 times to open a folder or a file if it is located on the far right or the last column.

  How do we turn off this horrible Windows 7 'development '?

  Hi tom1138,

  
  You may need to reset all settings to default folder view in Windows 7 by following the steps:

  1. open the Start Menu, type regedit in the search line and press ENTER.

  2. If prompted by UAC, click Yes.

  3. in regedit, expand keys (folders) in the left pane to:
  Settings\Software\Microsoft\Windows\Shell HKEY_CURRENT_USER

  4. in the left pane, click with the right button on the BagMRU key and click on delete.

  5. click Yes to delete.

  6. in the left pane, click with the right button on the bags key and click on delete.

  7. click Yes to delete.

  8. in regedit, expand keys (folders) in the left pane to:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell

  9. in the left pane, click with the right button on the BagMRU key and click on delete.

  10. click Yes to delete.

  11. in the left pane, click with the right button on the bags key and click on delete.

  12. click Yes to delete.

  13. close regedit.

  14 close the session and log on or restart the computer to apply.

  EDITING REGISTRY WARNING:
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Aziz Nadeem - Microsoft Support

• Why the office buttons, Tablet and phone are switched in the last update?

  Why the office buttons, Tablet and phone are switched in the last update? Are they placed in a different location or have they been deleted all together? I need these options.

  Greg

  I thought about it. They have moved to the Page, and then add another layout.

  Greg

• El Capitan too far?

  2011 MacBook Air.   2 GB OF RAM.   Always updated OS is up-to-date, but El Capitan seems too far.   Beach ball in Safari etc.

  Etresoft run suggest OF RAM.    If so, can I somehow return to Yosemite, which seems to work very well.   This MBAir has been completely problem free and realize time may be here to renew but short term a step backwards in the operating system would help if possible.   I did a check for bad things, but none here.   Then removed the verification tool to ensure that it was not slow me down.

  The system requirements for 10.10 and 10.11 are identical. 2 GB of RAM is pushing it. 2 GB is the strict minimum and may not be used for much in the view of many here.

  What "auditor" did you use?

• Icons are too far to the left on the allignment of monitor problem?

  The icons on the screen of the monitor are adjusted too far to the left.  If I could reach in and just move the entire screen an inch to the right, it would be good.  I asked a lot of people 'tech' and nobody seems to know how to solve this problem.  Any help would be appreciated.

  If only the icons are far to the left, you can simply drag-and - drop icons anywhere.

  If the entire screen, including the taskbar is far to the left, you can use the buttons on the monitor to adjust the size of the screen.

• Paper feeds too far into the printer so that the top inch of the print page is lost

  White sheets of paper flow too far into the printer. This causes the top of the page to print.

  Hi pilot6856,

  I'm sorry to hear that you're always having paper a bad diet with your OfficeJet 6500 a Plus. Please take a look at this video and follow the steps in troubleshooting for affected by frequent problems of power.

  There are a few crucial steps that need to be done, please let me know if that helps. I look forward to hearing from you soon.

  Thank you

• HP LaserJet P1102W: HP LaserJet P1102w prints 1/2 inch too far down on the page

  When I print with that printer using Word, it starts about a half inch of print down on the page.

  I tried to reset to factory settings, but it does not always work on me.

  Any help would be appreciated.

  Hi @2poodles2 ,.

  I see by your post that when you print from Word, printing is printing too far to the bottom of the page. I'd love to help you.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem. Select the method two.

  HP LaserJet Pro P1102 and P1106/P1108 Printer Series - printing a Configuration Page.

  You have this impression of question from other applications?

  If this isn't the case, it may be a margin setting in Word applications. Please check the margin settings.

  Make sure that the appropriate settings are defined in the properties of the printer and the application you are printing from.
  On the file menu in the software, click on print.
  Select the product, and then click Properties or preferences.
  Click the paper/quality tab.
  Check the Type of paper size, paper Source, paper, to ensure that they are correct.

  Try to print again.

  If you still have problems, copy the Word document and paste it into another program, such as Notepad, to see if you have the same results.

  What version of Word are you using?

  How is the printer connected? (USB, Ethernet, WiFi)

  If you appreciate my efforts, please click on the button below the thumbs up.

  Thank you. I look forward to hear from you.

• I used the snap, but went too far with the mouse that has placed the window out of view on the desktop. How I suddenly back

  I used the snap, but went too far with the mouse that has placed the window out of view on the desktop. How I suddenly back

  Try clicking on the Chrome icon & press f11 to maximize the screen.

  Kind regards

  Nicholas Lee Fagan

• HP photosmart 7510: alignment of the paper. When I print to my 7510 always prints too far to the right.

  When I print to my Hp photosmart, 7510, wheter be photos via AirPrint on. My IPhone or the Documentation of an environment of windows 7, or Mac os X or even my old windows xP it always prints too far to the right on the paper. This result s in all the text is visible. For photos of the result, is a white edge on the photo and cut off.

  I read manual and I have confidential amputeret that the paper is correctly placed. Else all works well, AirPrint and all absolutely no problem. updated to the last companies

  BECN, I saw this problem caused if ever there was a paper jam and something has filed in the mechanics of the printer. Here is a video on how to check for this:

  http://goo.GL/IDtwa

  Also, just to see if it is more than hardware/software partners, can you make a copy of the scanner and tell me how it turns out?

  Let me know!

• Layer mask to prevent students from going too far outside the head on atypical forms of head

  For example, a frog head straight research has plenty of space to just cover your students should I look too far. If some sort of code called mask would keep another layer of screening outside it would be awesome!

  Thanks for the request. Have a mask clipping support or equivalent to deal with students is something that we are considering. For now, you might be able to diminish the value of the parameter eye gaze strength (in the behavior of face) in order to reduce the distance.

• Title scrolls too fast

  I'm on first Elements 9 and adds a title scroll in the menu title. When I play back the frame, the title scrolls too fast to read the credits. I lengthed the timeline in the timeline using the tool of time Scretch, but this just adds virgins pictures before and after the scrolling credits. Credits not only stretching and slow, scrolling at the same speed in a sandwich between the beginning and end of the empty frames. Any thoughts?

  Welcome to the Forum.

  Steve you given the method of increasing the duration of the title - just a click + drag on the tail, to get the necessary length. This will also slow down the animation title predefined Roll.

  If it still does not give you what you want, about the speed of the roll of the title, I suggest to remove this preset (it is easy to apply, but limited in the control) and instead of using the fixed effect > Motion > Position and Keyframing, which sets the effect manually create the roll. Steve nicely covers Keyframing in his tutorials Keyframing base to Muvipix.com. I highly recommend to go through this tutorial several part, the concept of keyframes can be intimidating to everything first, but all time spent to get in tune with them, will pay dividends over time. Keyframes can be applied to most of the effects, all two fixed or added.

  With the movement > Keyframs Position, we can control the speed of the roll, can pause, if you wish, and can then animate to roll offscreeen. Several effects can be touch-ups on the same title too.

  Although easy to apply, I don't remember the last time I used one of the animation Presets, because key frames offer an infinite control.

  Good luck and let us know if you have any questions about keyframes, after reading the tutorials of Steve.

  Hunt

• Why my video clips will run too fast when played on the monitor Panel?

  I posted my problem earlier today, but in re-reading it maybe I didn't explain well enough.

  My main question is: "why my video clips will run too fast when played on the monitor Panel.  It comes from occurring after I selected my media in the Panel tasks and placed in the correct order in the Timeline/timeline.  I knew something was wrong when I saw that the clips did not indicate their right length when it is displayed in the timeline (scope).  They have been compressed in only a few seconds, then the clips should have at least 5 minutes.  I ran the clips in the monitor and of course they ran too fast, with a lot of jerking movements.

  3 video clips, I'm doing a PAL HD video taken with my Nokia N8 mobile video camera. Here in mp4 format. This may be a problem?  Note that when I play these individual HD clips on my computer (Windows Media Player) they work perfectly.

  After that I put the clips in my project Panel (or before in the work space organize), I have perforned no modification or manipulation of clips.  They are in their original state.

  Simply too check that the clips do not appear to be compressed, I burned a DVD, the resulting video ran in a few seconds.

  Help would be greatly appreciated.

  What is your project Preset?

  If you right click on the items in the project Panel, then choose Properties, which is displayed for the FPS?

  It could be that the FPS flag is not picked up by the GER, and if this is the case, you should be able to fix this by choosing to interpret the film and by changing the FPS to 25.

  Hope that helps and good luck,

  Hunt