Primary report IR - how to replace user defined report

Similar Questions

• How to create user defined groups and users with custom permissions as only open and export in obiee 11 g?

  Hello

  I want to give as open & export to the level of permissions.

  How to create user defined groups and users with custom permissions as only open and export in obiee 11 g?

  For example, if the group permissions, inturn should reflect on the users.

  Please help me.

  Thanks in advance,

  A.Kavya.

  Your question is quite broad and fuzzy then I suggest the security catalog presentation to read documentation: http://docs.oracle.com/middleware/1221/biee/BIESC/mgrgrpsusers.htm#CIHIBJGD

  And I think that you mix you two things which are managed in different places:

  ) an object as read access permissions, write, delete... which control you through the object "Permissions" dialog box

  

  

  (b) functional privileges controlled through "Manage privileges" under "Administration".

  

• How to set 'User defined' palette display IMAQ?

  When I select the "User defined" palette on the screen, it shows just the regular grayscale palette.  I want to replace that with the palette 'Rainbow' but slightly amended in the range.  How can I do this?

  Thank you!

  MK

  Wire a new array of RGBs 256 elements to the User Palette of your image window property.  You can use IMAQ GetPalette to retrieve the rainbow palette and change that.

  

• How to get user defined Native Types is displayed

  I added a new user defined native Type using type Admin

  

  I saved, closed and then reopened the Data Modeler, but he does not appear in the Source Type drop-down list when I define a column in the relational model. I've defined the relational model to use 12 c as the Site of RDBMS. Am I missing a step in the installer?

  I use 4.1.3 on a Mac.

  Hello Kent,

  the native DB types never appear in the column definition. You need to create the new type of logical data and map it to the native type or change the mapping of logical type existing. The steps are confusing because it's like the problem or chicken (which is the first), you you will be defined first:

  (1) define the native type - save definitions - defined by the user of the native types had to be saved in order to be available for native types logic mapping

  (2) identify the type of logic - probably VARIANT in your case, define the mapping of native type logic

  (3) in native type definition define the mapping of native code to the logical type (it is mapped on the CLOB type on your photo - probably you will change it)

  (4) save the definitions

  Philippe

• Where / how LabVIEW stores user-defined color palettes?

  Hello world

  in order to introduce the CI defined in our screw colors, I entered all colors in the hand LabVIEWs color dialog box using RGB codes just to find out, they had disappeared after the next startup of LabVIEW. Is there a way (a kind of ini file) and make them available at all times?

  Haven't found anything yet on the forum or in the help system.

  See you soon

  Oli

  Yes it is.

  Tools > Options

  

  ini entry is in this format

  colorUserItem = "3D object = BCBCBC; Control the background = SCOTT; indicator background = D2D2D2; object Active 3D = 969696; Text = 000000; LED on = 64FF00; The LED is off = 1E4B00; Thermometer of filling = FF0000; Drag fill = 0041DC; Drag the housing = 6D6D83; Tank fill = 0041DC; Housing of the tank = A9B3CB; Classic = B3B3B3; Classic Slide thumb = 3399FF; Wire RefNum = 007F7F; Comment by model = 91FBFE; Warn = FF7F00; DAQ = 893900 "

  WARNING: most of these colors apply to the new screws, no changes are made to existing screws, however, "Coersions points" apply to FG Blink new or existing screw. and BG Blink applies only to the new screws.

  Changing some people can be a royal pain.  For example, you wouldn't want to remove "Control background" and replace it with "success."

• How to remove the user defined color chart

  Hello I use a mac and CS5.5, I just want to know how to remove user-defined shades.

  Help and everywhere in the forums, I searched and there are a few answers, I followed along but so far none of them worked.

  Please help me if you can.

  Thank you

  In the Finder, choose go > go to folder type in "~/Library" (without the quotes), it's the tilde key (the wavy line next to the number 1 on the keyboard), and then the anti-slash-library.

  This will open the library folder of the user for the Mac operating system.

  (With OS 10.6.8 or more you can simply access the disk hard/Users / [you] / library because the library folder is not hidden, unless you use Mac OS 10.7 or newer)

  Now, go to / Application Support/Adobe/Adobe Illustrator CS5.1/en_us/Swatches

  You will see the files defined by the user, if they have been saved to the default location. If they were not saved to the default location, you will have to search your hard drive for the file names.

• Xquery functions using predefined in user defined functions

  Hi all
  
  I have a requirement to call a function defined by the user in the osb xquery file. That function, I use osb predefined string functions, but they do not work it displays the error message in the file of xquery. Can you please suggest how to use user-defined functions.
  
  Thank you
  Srinivas.

  xquery version "1.0" encoding "Cp1252";
  
  declare namespace xf = "http://tempuri.org/TransactieService/Xquery/test/";
  
  declare function xf:test($string1 as xs:string)
      as xs:string {
          xf:buildReferenceRange($string1)
  };
  
  declare function xf:buildReferenceRange($inRange as xs:string)
       as xs:string {
       let $filtered :=
            if (contains($inRange,"^"))
            then
                 "it's in"
            else
                 "it's not in"
  
       return $filtered
  }; 
  
  declare variable $string1 as xs:string external;
  
  xf:test($string1)
  

  It works for me

• How to remove (for a user), a registered user defined IR

  Hi dev-team.

  Asked me to explain to an end user how to remove an IR defined by the registered user Hmm...

  Honestly I've never lost any thoughts about this issue.

  I just assumed that it's as easy (for a user), such as the creation and registration of a user defined IR

  Now, I had realized that it was a false assumption...

  Qustion: What will be possible in a future version (5.0, for example)

  Concerning

  André

  If you have a report to your end user option, and if he or she created the report they can remove the report from their car.

  1 Select the report of IR drop down, then click on the + in the research of IR bar on the right side you get on a click of an X that then click on apply the user's report will be deleted.

• How to use the negation in the user defined rules?

  Hello

  Can you please show me an example using negation in the rule set by the user? I created a rule like below (the rule says that if a patient has a fever problem and not having penicillin hypersensitivity, then recommend medication1):

  INSERT INTO mdsys.semr_myMedicineRB VALUES ('rule1',

  ' (? p RDF: type: Patient) (? p: present? c1) (? c1 RDF: type: fever) (? c2 RDF: type: Penicillin_Hypersensitivity)',

  "(NOT_EXISTS (p: present c2))',

  ' (? p: recommendation: medication1)',

  SEM_ALIASES (SEM_ALIAS (",'http://www.example/medicine#')));

  The rule correctly applied in the modules. However, I cannot move to the phase of creation entailment and got errors:

  ORA-29532: Java call terminated by eception Java exception: java.sql.SQLException: parameter IN or OUT to missing index: 1

  ORA-06512: at the 'MDSYS. SDO_SEM_INF_INTERNAL', line 16453

  ORA-06512: at the 'MDSYS. SDO_SEM_INFERENCE', line 302

  ORA-06512: at the 'MDSYS. SDO_SEM_INFERENCE', line 352

  ORA-06512: at the 'MDSYS. RDF_APIS', line 118

  ORA-06512: at line 2

  29532 00000 - "Java call terminated by eception Java exception: %s."

  * Cause: A mistake or a Java exception has been reported and could not be

  solved by Java code.

  * Action: Modify Java code, if this behavior is not expected.

  According to the post primitives(noValue,remove) integrated for user defined rules, it seems that negation is not supported in rules defined by the user. Can you please advice how to implement the negation in the rules defined by the user?  Thank you very much in advance.

  Hong

  Salvation Hong,

  Negation is not supported in rules defined by the user. If you need a work-around, please follow the suggestion in the post you referenced.

  If you use Oracle Database Release 12 c, user-defined inference can certainly manage negation.

  It will be useful,

  Zhe Wu

• How to change the user defined objects in oracle

  Hi all
  
  Can someone tell me how to change objects defined by the user in oracle.
  
  
  Thank you
  Prakash P

  You have created other objects that depend on your type? If so, according to the error message, you can use the keyword of the WATERFALL to change dependent objects

  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE OR REPLACE TYPE phone_t AS OBJECT (
    2  a_code   CHAR(3),
    3  p_number CHAR(8),
    4* extension VARCHAR2(5)) ;
  SQL> /
  
  Type created.
  
  SQL> create type phone_arr as table of phone_t;
    2  /
  
  Type created.
  
  SQL> alter type phone_t
    2   modify attribute extension varchar2(10)
    3   cascade;
  
  Type altered.
  

  Justin

• Dynamic where clause of user defined reports

  Hello everyone,
  
  Is there a way to make / calculate a where clause clause in a user defined report according to the value of some bind variables?
  I am trying to remove where the terms of my application if the binding variable is not defined.
  previously, I did something as
  AND tab.column = nvl (: colum_bin, tab.column)
  
  but there are problems in implementation plans.
  
  Stone

  Sure that you can not, but how about you to rewrite the NVL in

  OR: colum_bin IS NULL

  Hope that helps,
  K.

• How to create a user-defined Service

  Hello

  The Microsoft article "How to create a User-Defined Service" is very explicit. I understood how to deploy a file .exe as a windows service. But my executable creates and writes a .txt file that I do not see that appear when I starts the service. I have to do something special?

  Thanks in advance, supertreta.

  I found the answer: she was on C:\WINDOWS\system32. Sorry for my precipitate question.

• How to create a user-defined function?

  is there a substitute for the exe instsrv and srvany in Vista?

  I don't know what means your post, so here's how to create a user-defined function:
  1) click Start
  (2) select "Control Panel".
  (3) select "system and maintenance".
  4) click on "Administrative Tools".
  5) click on "Task Scheduler."
  (6) click on "create task" (right in the list pane under) "Actions") "
  "(7) opened in the general tab it will choose if it only works when the account that is used to implement is connected, or ' if that user is logged in or not" (leave the box ' do not store the... "empty password)
  (8) always in the general tab, check the box 'run with highest privileges '. (This will ensure that no program can block)
  (9) type a name for the task (in the general tab)
  (10) to set the job to run an awhile, use the "triggers" tab, if you want to set a task runs after xx min. temps_inactivite, choose the 'conditions' tab, then choose the desired time.
  (12) click on the 'actions' tab click on 'new '. in the program/script line, search for and select the program you want to run, and then click Open.
  13) click OK in the window "create a task".
  14) click OK again and you are done.
  I hope this helps.

• How to replace split tunneling by user

  Hello

  I have an ASA 5505, clocked at ASA 8.2 (2). I use 6.2 (5) AMPS.
  ASA is set up with the split tunneling, and it works perfectly.
  However, for some users, I want that all traffic, including Internet traffic, routed through the ASA.
  The IP address on the internet each spesific users should be identical to the ASA on the outside, not the local address of the client.
  So the question is:
  How simple replace the split tunneling to the user level?
  You can also implement a group policy "tunnel all ' for the specified users?
  A solution at all?

  Thanks in advance,

  Erik

  Hello Erik,

  so I would say it lacks somethine like:

  outside_nat0_outbound to access extended list ip 192.168.50.0 allow 255.255.255.128 192.168.1.0 255.255.255.0

  NAT (outside) 0-list of access outside_nat0_outbound<-- no="" nat="" for="" communication="" to="">

  NAT (outside) 1 192.168.50.0 255.255.255.128<-- nat="" the="" first="" part="" of="" subnet="" to="" outside="" interface="">

  Unfortunately, I work with IOS 8.3, so there may be a few misstakes in the command line.

• How to operate the user defined table ddl transformations?

  How can I run (Oracle Data Modeller 4.1.0.873) my transformations of the user-defined table ddl (for the creation or - map source files). (In tools-> rules of design and Transformations-> Table DDL transform his only Test and debugging for an entity)

  Is it possible to have a new button in the toolbar to start my generations DDL?

  Hello

  There is a brief description in the file sqldeveloperdatamodelerscripting.docx located in the directory datamodeler\datamodeler\xmlmetadata\doc of your DM 4.1 instalation.

  Somehow you can read also here Oracle SQL Developer Data Modeler 4.1 user - defined DDL generation using transformation scripts

  You can use the script for the purposes of testing only, otherwise the output of this script will be included in the DDL if script 'Active' selected value and ago marked to be included in this generation of tables

  Philippe