Print jobs may not reach the printer

Similar Questions

• Some of function boxes are elongated and may not reach the OK box

  original title: Windows Vista - Control Panel customization to enlarge the font size.  Some of function boxes are elongated and may not reach the OK box

  Using Windows Vista. I used the customization Panel control to enlarge the font size.  I discovered that some boxes, like Adobe Reader Print and function, in effect, the Personaization (to reduce the font size to original size) require a click OK. But the box frame with large font size, is elongated until I can't get the OK.  How to get to the OK or reduce the size of the police without the OK?

  Simply press enter instead of OK.

• Impossible to update, cannot unlock the drive, may not reach the store, nothing on the start screen

  Symptoms...
  1. After several months of work perfectly, I made a mistake (details below) and attempted to retrieve a previous Restore Point.
  2. the system always starts ok, and some things work.  However...
  3. some applications don't work anymore, for example, Logitech SetPoint.
  4 files Explorer remember settings and defaults to each invocation.
  5. various Windows settings have been lost.
  6. the Windows 8 start screen has only 'Start' and my login ID.
  7. I can't update the system or re-install the system.
  8. "change system settings" does absolutely nothing.
  9. I got error messages saying my system disk is locked and I need to unlock it, but I can't do it.  None of my disks is BitLocker on, and I can't find any other meaning of "locked".  The message is "the drive where Windows is installed is locked. Unlock the drive, and then try again. »
  10. I suspect some programs of Windows 8 system are corrupt or lost, but the OS is clearly still Windows 8 in appearance and behavior.
  What I tried...
  1 clean the registry with various cleaners.
  2. checked with Windows Update, the software has been completely updated.
  3. the Windows troubleshooting diagnostic tool has not helped.
  4. the same problems occur in Mode without failure.
  5. always had problems after a clean boot.
  6 sfc/scannow (as admin) did not help.
  7. I can't do a simple Refresh or reset because I can't go to the store.
  8. out of desperation, I tried updating to Windows 8.1 Overview, but it doesn't have to say that my system disk is locked.  I couldn't find sort of the 'unlock'  BitLocker is off anyway.
  9. I downloaded the installation of window package 8, created an ISO file and burned a DVD.  Tried to repair and regeneration, but both failed.  Once more, the error message said that my system disk is locked.
  10. I am very reluctant to throw my applications, I have over a hundred installed.  In any case, I'm afraid that if I format the system drive, I won't be able to install Windows 8 in all.
  How it all started: I made a mistake...
  I installed the Gavotte RamDisk and then tried to delete it, forgetting that I needed to run 'as administrator '.  This does not, without saying why, so I removed with Control Panel etc.  Once I did, things started to go wrong.  Previous restore points did not help, and after floundering about in frustration and growing desperation, I ended up here where I am now.
  The system...
  1 MSI motherboard (Z87 - G43)
  2. 2 x 4 GB Corsair Vengeance RAM (CMZ8GX3M2A1600C8)
  3. three SATA drives, each with two partitions
  4 DVD burner
  5 external USB floppy
  6. two analog monitors, one connected via a digital-to-analog converter (powered)
  7 keyboard and mouse Logitech wireless
  8. USB printer cable
  9 LAN with another PC of Windows 8 that works properly
  10. access to on and old XP laptop
  WHAT CAN I DO?  I HIT THE BUFFERS!
  The Solution
  ========
  The result was much better than I expected.
  If you take the road to Microsoft to fix the system, it offers a 'Refresh' or 'remove all and reinstall '.  These two failed because they require access to Microsoft Store.  However, there is a middle path to fix, as long as you have a product key, which re - install Windows 8 as if it were an 'upgrade '.
  The process is described quite well here:
  http://www.TechRepublic.com/blog/Windows-and-Office/quick-tip-download-a-new-copy-of-the-Windows-8-upgrade-ISO/
  In summary, download the upgrade of widows 8 components and create a picture ISO of DVD, you must burn it to a DVD.  Then, you use this disk to re - install Windows 8.  The great thing about this is that it offers keep your files and settings.  (However, as it is an 'upgrade' it does not provide the option to install on another partition.)
  In my case, it worked much better than I expected.  Most of the Windows settings, I thought were lost forever, have been restored.  It's as if she restored settings that he did not know that there :).  Instead of spending hours putting my system after re-setup, I was able to relax, take an evening away from the PC!
  Thanks to the person who responded to my original query.

• Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Most desktop printers cannot image all the way at the edge of the page.

• A problem with cc libraries "the file does not exist, you may not, or the file may be in use by another application".

  I'm working on our catalogue on INDesign CC 2015, I have a links to my libraries, I worked every day without any problem. I work on a Mac and Win system, I put the file on my disk hard or on files of cc.

  2 days ago, I opened the file and as a result with any missed links, when I tried to re-link on my library the program shown Indesign files missed this message "the file does not exist, you may not, or the file may be in use by another application", I contacted Italian cat Adobe they suggested me to change the name of the file I did but nothing happened, they suggested to create a new owner of the computer, but it did not work because I work within a team and the file is opened to others of collaboration. I have 333 links so what I shell do? Please help me, I have to finish this work, we need print it out as soon as possible.

  I had this problem after an Indesign file that we've been working on the opening of my colleague. She has made a few changes and then when I went back to work on the file of the library of all the links were broken and I had him "you don't have to leave."

  I've corrected the problems by opening Illustrator and rename the library. InDesign revived and everything from the library was connected properly.

• Portege R100 video cable does not reach the replacement LCD screen

  Hi guys, I have replaced the LCD screen of my Toshiba R100, than they had in it was defective. It seemed that it was a replacement at some point however. In any case, I received my new screen, but does not reach the video cable to the top of the circuit of LCD screens. How am I meant to connect it to the screen? Is there an extension cable or what? The screen they had in there previously looked like they were welded copper wires about 8 digitizer.

  Here are 2 pictures of what I mean

  

  

  Hello

  Where did you buy this screen?
  Are you sure that it is perfectly compatible with your laptop protected R100 to 100%?

  Looks like it s not fully compatible
  However, if an extra cable is necessary you can get it from the Toshiba ASP in your country.

  In your case, I recommend you contact the guy and ask for compatible cable!

  Welcome them

• When you use Roland FC300 footswitch to control the transport, all the USB keyboard midi notes do not reach the logic. No help available on this?

  When you use Roland FC300 footswitch to control transport LOGIC, all midi keyboard USB (UMA25s) notes do not reach the logic.

  They are visible using MIDI Monitor s/w so reach the OS X - but do not make SENSE.

  I tried the function of the environment of the logic and the double check OS X Midi Setup but no difference statistically.

  I would appreciate any help on how to proceed.

  Thank you

  Paddy

  I do not understand your post. Your use the FC300 to control logic - how is it connected?   Is it plugged into the keyboard via middle or did you connect to logic directly via a midi interface?  (sense are the keyboard and the FC300 connected independently.

  When you say midi notes reached illogical (those transmitted by the FC300 or those via the USB keyboard do you mean?).

  First thing to do is to circumvent the control surfaces to exclude...

  Then, the control screen the custom value and see if data midi reached logical... If his hitting the midi monitor 99.9% sure it is hitting logic.

• My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?

  My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?

  Apple ID cannot be merged. We'll see if we can get to the bottom of your connection error...

  Tell us step by step, in detail what your actions.

  Tell us a story

  -with a beginning, middle and end. We need to figure out what you know and that you have lived.

  If this problem is new, tell us what immediately preceded its appearance - add software, upgrade or update? New equipment?

  Quoted by of Apple  'how to write a good question.

  To help other members in answering your question, give as much detail as possible.

  • Include your name (peripheral) product and specifications such as the speed of the processor, memory and storage capacity. Please do not include your serial number, IMEI, MEID or any other personal information.
  • Provide the version of your operating system and the relevant applications numbers, e.g. "OS X 10.4.11" or "Safari 4.1.3.
  • Describe the problem and include all the Details on what seems to make it.
  • The list of troubleshooting steps you have already tried, or temporary corrections that you discovered.

  For a detailed 'coaching', please see usage tips , help us help you on these forums and wrote an effective communities of Apple Support question

  "Keep it short and Simple"-take your time... but be thorough - CCC

• How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

  Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

  I assume that you use a while loop to keep the updated value.

  Add a record to offset to your looping it initialize with a U32 (time in ms)

  Add the registry to offset to your loop that keeps the previous value of your bool

  When your reaches the threshold value => the light and set the current time in your shift register.

  In the next iteration of the loop weather check value is still above threshold

  => Y-online previous set to true?

  => Y-online the next iteration

  -Online N => turn switch on and set the current time in your shift register.

  -Online N => subtract the time current less time shift record-online more then 5 seconds?

  => Is => keep turning on

  -Online N => turn given

• On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "Please help

  On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "This message appears for firefox, AVG, Windows live messenger, windows MediaPlayer etc.

  I can access my documents, Panel etc. and everything is there, but it won't let me not get access to the programs.

  Also when I go to click on itunes and open office it happens "this file has no program associated with it for performing this action. Create an association in the set associations Control Panel.

  Given that I was able to access control panel, I was able to create a new user and use it for now to send this message and all programs have worked on it and I was able to check for the presence of viruses on the Avg on this and everything was clear.

  Could you please explain whats wrong and tell me how to fix this please: D thanks

  Hello
   
  1. don't you make changes before the show?
  2. is the computer is joined to the domain controller?
   
  You can not start any application on a client computer that is joined to the domain controller. When you try to start this type of application, you receive an error message similar to the following:
  "Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  This can also occur if the user account is damaged. If the computer is not connected to a domain controller, try the following steps.
  1. connect to another user account and create a new user account to fix the damaged user account.
  For more information about creating a new user account and the fixing corrupt user account, visit this link: http://windows.microsoft.com/en-US/windows-vista/Fix-a-corrupted-user-profile
   
  Previous post the results in more detail, so that we can help you further.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.

  You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.  They will have to copy the files in the folder to make changes and then copy a review of back in.  Locally and on the network

  Hello

  1. In Windows Explorer, right-click the file or folder you want to work with.

  2. In the context menu, select properties and then in the Properties dialog box, click the Security tab.

  3. In the name list box, select the user, contact, computer, or group to which you want to display permissions. If the permissions are grayed out, this means that the permissions are inherited from a parent object.

  https://msdn.Microsoft.com/en-us/library/bb727008.aspx?f=255&MSPPError=-2147217396

• Windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu

  Hello world

  I know, there are several other threads on this topic, but I couldn't find a working solution. I currently have no OS on my DELL XPS 17 L702X. When I try to install from a USB stick bootable Windows 7 Home Premium x 64 I get this error message: windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu.
  I've tried wiping HARD drive and reformat with GParted. I don't really know what I could do.

  I would be very grateful if you could help me

  Hello

  I suggest that you contact the manufacturer of the computer to change the BIOS settings and check if it is has updated the BIOS.

  Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know the results. We will be happy to help you further.

• Hello. I bought Lightroom, paid license 1 year view, did not have serial. E number and then past the 30 day trial and may not use the product or work more hard. I paid has been deducted from my credit card. How I'm going to work now?

  Hello. I bought Lightroom, paid license 1 year view, did not have serial. And number and then past the 30 day trial and may not use the product or work more hard. I paid has been deducted from my credit card. How I'm going to work now?

  Hi Sergior96769872,

  I saw your Adobe ID (email address), you used to post on the forums, and I see an active subscription on it.

  Please see Help below links: { make sure you use the same Adobe ID (email address) that you used to purchase the subscription }

  Connect and disconnect activate Cloud Creative applications

  Adobe Creative Cloud apps back in test mode after 2015 set CC to update

  * NOTE: Make sure that your firewall of your computer or security software firewall does not block Adobe, if you are not sure of it can just disable the firewall for a while and then log off and log on creative application of cloud and check.

  If it still gives you an error of the trial, then please refer to the troubleshooting listed below:

  If you are using MAC:

  1-force Quit the sub process in the same sequence as shown below from Activity Monitor: see, use the monitor activity on your Mac - Apple Support

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2 - right click on the Finder icon, then select the "Go - To" folder. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library (it will open the folder of the user's library.)

  3. browse to the Application Support > Adobe > trash OOBE folder and folder AAM Updater

  4 - CUT any installed security software with firewall system.

  5 - go to: Apple icon > system preferences > Security & Privacy > General > "allow applications downloaded on" change this anywhere (to make these changes click the padlock in the corner at the bottom left of this window and enter your computer password)

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  6 - restart the cloud creative app and connect

  
  

  If you use the WINDOW:

  1 complete the process / Task Manager tasks in the same order, as mentioned below the Manager tasks. See, Open the Task Manager

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2 - C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is hidden folder please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  3 - CUT any security software installed with firewall system, also if your having any browser Add On installed for blocking advertising that turn off too.

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  4 - raise the cloud creative app and connect

  Let us know if that helps.

• I can't get Photoshop and Lightroom to download keep may not find the secure server?

  I can't get Photoshop and Lightroom to download keep may not find the secure server?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

• Error "could not open the file" *. " INDD. Adobe InDesign may not support the file format, a plug-in that supports the file format is maybe missing or the file may be open in another application."

  How do I solve this problem

  "Could not open the file" *. " INDD. Adobe InDesign may not support the file format, a plug-in that supports the file format is maybe missing or the file may be open in another application."

  It turns out that a Windows computer has been infected by a virus that worked its way to the server. We zapped the virus and restore the backup files.