Print Spool system does not

Similar Questions

• Equium M40X: Cannot print - not done. Print Spooler service does not

  My notebook Equium M40X has suddenly decided to stop from allowing me to print, gives me the message "operation was not completed. "print spooler service does not. I get this message even when you try to install the original installed printer drivers.

  To resolve this problem, I went to the services.msc to attempt to start the print spooler, but the command is not here present and seems to be missing. I also tried to launch it by clicking Start and then run and typing "net start spooler", but even once, it does not. Can anyone help with this?

  My laptop is an Equium M40X and the operating system is Windows XP Service Pack 2.

  Hello

  This error occurs because the spooler service has not been started or has stopped working.
  It seems that this error is known to Microsoft and they decided to public an article in the knowledge base that could help solve this problem.

  http://support.Microsoft.com/kb/314876

  As you say that the spooler service must be restarted.
  To start the spooler service, follow these steps:
  1. click on start and then click Control Panel.
  2. double-click Administrative Tools and then click Services.
  3. double-click on the Printer Spooler service and then change the startup type to automatic. This option sets the spooler service starts automatically when you restart the computer.
  4. If you want to start the spooler service immediately, click the Start button under the Service status field

  If you will not be able to restart the spooler service, you can try to restore the Windows operating system to the point initially by using the Windows System Restore tool.

• Printer error print spooler service does not? Why not

  I have a problem with my printer .  I went to use this boy was that cannot use a misstake... go Control Panel /printer .and see I have no printer and you can't print at all.  I tried to instwith a CDerror the Print Spooler service does not... I need help big time what should I do? 

  HELP Florida Irving

  Hello

  Try the steps below and check if they help to resolve the issue.

  Method 1:

  Check the link below and try the troubleshooting steps provided to solve the problems with the printer in Windows.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  If the steps in the link above do not help, try to manually restart the Printer Spooler service.

  You must be logged on as administrator to perform these steps.

  (a) open administrative tools by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  (b) double click Services.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) right click on the print spooler service, and then click Properties.

  (d) on the general tab, next to startup type, make sure that automatic is selected.

  (e) if the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation

• Failed to load printer - clicking Add indicates a Printer Spooler Service does not.

  Upgrade Windows XP to SP3 last night.  Now all in printers and faxes has disappeared.  Click on add a printer indicates the Spooler Service does not.   Went in and forced a start; Add the said printer still does not.

  Deleted old printer drivers (Lexmark).  Downloaded updated.  Execution of Lexmark is set up; said the spooler does not (yet), tries to start.  Then, the installation fails saying "No. valid Ports for the driver.

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  I think that your problem is related to the way that Lexmark install printers, as explained in this excerpt from the article linked in step B below (step numbers refer to article in full):

  If you have a Lexmark printer, these additional steps may be necessary (thanks to Robert Orleth [MSFT] to provide this information).  Sometimes, the Lexmark printer installation process installs a service that makes dependent Print Spooler service itself.  If there is a problem with service Lexmark or a Lexmark printer driver (or you have removed using the procedure above), Print Spooler service does not start (see also http://support.microsoft.com/default.aspx?scid=kb;en-us;324757).  The steps below make Print Spooler service only on service (RPCSS) remote procedure (RPC) call, which is normal.  Print Spooler service dependencies are stored in the registry at

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler\DependOnService

  The sc config step 16 command resets the value for this entry.

  1. Open a command prompt window

  2. the control key
            sc config spooler depend = RPCSS
        (Note the space after the = not before)

  3. Restart print spooler (see steps 8 and 9 above)

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Printer Spooler service does not

  No apparent reason, I can print is no longer.  In Panel, printers and fax machines, no printer is listed despite the fact that there were at least two.  If I try to add a printer, I get the message Printer Spooler service does not. I was on the Microsoft site and loaded a convenience store who confirmed that the Printer Spooler service did not work but cannot fix it.  Not very useful at all.  Can anyone help.  I saw that a lot of old messages about this problem so it is not unique, but I'm really really stuck.

  You can start the print spooler by using different techniques, which one is suggested by Saurabh Joshi.

  Unfortunately, restart the print spooler generally fails to resolve the problem that caused the print spooler to stop in the first place.

  Apart from malware (and you'd be well advised to scan your system to update MalwareBytes Anti-Malware and SUPERAntiSpyware), are two likely reasons that your print spooler stops printer driver has corrupted and (b) corrupt print job stuck in the print queue.

  Start by removing the print queue.  With the print spooler stopped, go to C:\Windows\system32\spool\PRINTERS and delete the contents of the folder.  Do not delete the folder ...\PRINTERS himself.

  Then, clean and reinstall the drivers for your printer.  See the instructions at http://www.coribright.com/windows/Article_One.htm
  If you have a Lexmark printer, see this article for special instructions: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Print Spooler service does not

  All of a sudden my computer says print spooler service does not.  There are no printer.  What in the world happened and how to I fix that?

  Hi Mark,

  Try to reset the spooler Services service, click Start-> Run Type & -> services.msc-> ok.

  Locate the printer spooler on the right side-> right click and select Restart-> now Double click on Print spooler-> select automatic for startup type.

  If give you the error, try to replace spoolsv.exe is located in C:\windows\system32 in C:\WINDOWS\ServicePackFiles\i386.

  I hope this helps.

• on a printer shared and I get printer spooler properties does not

  When I try to print from my other pc it say memory and Printer Spooler context does not and when I go to control panal printer and try to right click on anything it says the spooler does not and not connected

  You can print from the computer to which the printer is physically connected (assuming that the printer is physically connected to one of your computers)?

  What version of Windows, including the service pack is on the computer to which the printer is physically connected? (Right click on desktop and select Properties, if you do not know).

  What version of Windows, including the service pack is on the computer that is giving you problems?

  How did the computer which gives you problems connected to your local network?

  Can you access any file on the right computer of the bad computer?

  What is the brand and model of the printer?

  The following applies to the computer that is giving you problems:

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  IMPORTANT: If either of the analysis above turns up malicious software (other than tracking cookies), both from the scans will work on all the other computers connected to your local network.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• printing problem "the print spooler service does not work.

  Original title: printing problem

  I want to print, but a warning said "the print spooler service does not work.  What is c? or what can I do?

  Hello

  I suggest to follow each steps of troubleshooting provided in the link below and also suggest to run the Fixit tool in step 2 and verify if it helps solve the issue

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• After cleaning viruses with Norton software, I lost my Brother printer connection. Message: Printer Spooler Service does not. Can anyone help me to restore

  I lost the connection to the printer or I can add a printer because it - Printer Spooler service does not. Can you have a suggestion or an opinion. Thganks much. Michael

  Right click on 'My computer' / select 'manage '.

  Under "Services and Applications", select 'Services '.

  Check to see if the "Print spooler" service is "started" and "Startup Type" is set to "auto".

  Also check if the 'RPC Remote Procedure Call () service is also "started" and "Startup Type" is set' auto.

  J W Stuart: http://www.pagestart.com

• Problem printing - "operation not completed; "print spooler service does not.

  My laptop has suddenly decided to stop from allowing me to print, gives me the message "operation was not completed. Print Spooler service is not running", even though when I look in the Services, it is running. I am running XP Build 2600.xpsp_sp2_gdr.050301 - 1519: Service Pack 2.

  Hello

  According to the description in this document from the Microsoft Knowledge base:
  http://support.Microsoft.com/?kbid=314876

  Please try this:
  1. click on start and then click Control Panel.
  2. double-click Administrative Tools and then click Services.
  3. double-click on the Printer Spooler service and then change the startup type to automatic. This option sets the spooler service starts automatically when you restart the computer.
  4. If you want to start the spooler service immediately, click the Start button under the Service status field.

  Maybe it helps you solve this problem.

• error1068 print spooler service does not I tried several times to restart it, but in vain.

  Error 1068 print spooler service is not running.

  Hello

  Outside the suggestion of Gerry C J Cornell, I suggest to run the command below and check if the problem is resolved.

  a. clickStart , and then click on run.

  b. type CMD /K SC CONFIG SPOOLER DEPEND = RPCSS and pressenter.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• problem printer-"the print spooler service does not work.

  tried to add the printer, but get message "the print spooler service is not running" what I do?

  tried to add the printer, but get message "the print spooler service is not running" what I do?

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• I want to add a printer, but get the error message "print spooler service does not work."

  I can't print from my computer.  This has happened with no other visible defects on the computer or the printer.

  When I use the printer in case of problem, and hit the 'add printer' link, I get the error message "print spooler service is not."

  "I did a search on"print spooler"but got no result

  Duane

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  If the suggestions below do not resolve your problem, after back and don't forget to include the following information:

  • The version of Windows you have, including service pack (start > run > winver > OK)
  • The brand and model of printer you have (includes the manufacturer, model and model number, as in HP Deskjet 6800)
  • How the printer is connected to the computer (parallel, USB, network, wireless, etc.).
  • It happened just before this symptom started
  • What application antivirus you have and if your subscription is up to date and has been maintained continuously
  • The full text of the error messages related to printing, without paraphrasing

  
  

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Error "the print spooler service does not work.

  print spooler - HELP

  my printer disappeared and when I tried to reinstall a message appears that the print spooler service is not runnin - HELP

  Hi masubb1,

  ·         You did changes to the computer before the show?

  You can try the following solutions.

  Method 1: Run the next Fixit tool and see if it helps.

  Problems printing and printing errors

  Method 2: Follow this guide step by step to solve the problem.

  Printer in Windows problems

• How can I fix the error message "the print spooler service does not work."?

  All printer drivers that I had loaded do not work or have disappeared.  After you download the printer drivers, I got the error message: "operation could not be performed.  The print spooler service is not running. "I have Windows XP.  I need to print now!

  To start the print spooler service, click Start > all programs > Accessories > run. In the run box type in services.msc. In the Windows Services window right-click on print spooler and select open. You will then see the options "Start automatically", and then on the button 'Start Service'. Click on those and then click apply then OK. Who should start the print spooler service, however, if you get an error message, see the link below for more information.

  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/391f3c57-5d2b-4E88-ADC6-190429a7fdbe