Print the location case sensitivity

Similar Questions

• Search in directories case-sensitive on the endpoints Cisco SX & MX series

  I have a problem when the search engine in the directory on a Cisco SX20 touch 10 or a touch 10 MX200G2 is case-sensitive. My client use search regularly and it's a real problem to have to capitalize each time looking. If a capital letter is not used, the result of research found nothing. SW version is 7.3.5 and 7.3.6

  Is there a way to disable the search case-sensitive?

  Thank you.

  Did some digging, you're sure you run CMA 6.2.0 or later?

  Seems to be a bug with Polycom CMA before 6.2.0, see the Polycom CMA 6.2 Release Notes, bug ID SSGSE-14527.

• Time machine does not take into account my partition which is case-sensitive.  Recovery has no data of this partition.

  I have a partition on my drive that is formatted for OS X Journaled, case sensitivity.  When I perform a backup, then recovery, all data in this partition is missing.  Time Machine does not recognize partitions of case-sensitive?  Strange, as the default format for Time Capsule itself is case sensitive.

  You cannot use the formatting case-sensitive with OS X. You will need to repartition the drive to Insensitive in full. You can not do any repairs or restore from a backup Time Machine.

• Cannot create disk image writable, case-sensitive on El Capitan

  Hi all

  It is my first time posting, so bear with me, pls if this seems to be a stupid question.

  I tried to create a HFS disk image + case-sensitive (logged) on my MacBook (early 2015 model. OSX El Capitan 10.11.2).

  The goal is to build Android AOSPS (according to the website of the AOSPS, case-sensitive file system is required).

  But so far, I was not able to successfully create a desired image (sensitive to case AND write).

  With "Disk utility", I was able to create an image in writing (i.e. when mounted, the file system is read/write) but not case sensitive.

  Why is "Disk utility" unable to do so because it provides even an option for "logging case-sensitive HFS +?

  Then I tried to use "hdiutil create" tool command-line (based on the results of online research), which has succeeded in creating case-sensitive, but read-only images (i.e. when mounted, file system is read-only).

  I tried different combinations of "-format ' & '-fs ' options, but nothing seems to work so far.

  With the help of 'hdiutil convert' does not help.

  All opinions are appreciated.

  Thanks in advance!

  This is a bug. The solution is to clear the disk image mounted in disk utility, choose HFS case-sensitive like the format.

• How to install the app CC on a disk "case-sensitive" or how to choose a different location?

  I need to create a new partition (journaled) on Macintosh HD to install CC app? Or, How to choose a different installation location?

  Yes.  Adobe error "Unsupported of disks case-sensitive" or similar facility. Mac OS

• Why are case-sensitive in the wrong place?

  Why are case-sensitive in the wrong place after conversion?

  If you want Acrobat to replicate your results, you must either use a program layout (as Design) or select the Adobe PDF printer in the print of your application menu before making your layout. Most processors redistribute the document based on the printer which is attached (i.e., it uses the settings of the printer). If you change the printer so that in WORD for example, the layout in WORD can change radically. This is what happens when you use the Adobe PDF printer. This isn't a question of Acrobat, but a word processor.

  MS out of printer settings in WORD with the first version of OFFICE 2007, but it seems to be back on by default. I guess they found, there was reason to leave it on (the box is buried in the menu options in WORD). This aspect of reflow is one thing that creates major problems for developers of WORD forms of WORDS. Depending on the machine, the shape may ebb and part go to the next page if not careful (I've had these types of forms before, particularly where people are trying to learn a lot on the page).

  Neither one of us know if we have answered your question because you give enough information to be able to tell. The key for almost any application is to change the printer to the Adobe PDF printer before you do business with any document. On my laptop, the Adobe PDF printer is the default and modify other printers if I happen to be connected to them.

• 'Find' is case-sensitive and the option does not appear on the search bar

  As I said, it is case sensitive. I looked for an answer and everyone says uncheck case-sensitive on the search bar, but he's not here. I am on a mac with os x 10.9.4 using Firefox 32.0.1.

  I thought about it. I had to restart with disabled addons. I don't know which extension caused the problem, but the change stuck when I re-enabled the addons.

• Quick search is case-sensitive. I do not think that this used to be the case. How can I 'quick search' break?

  Do the 'quick search' not quite as fast quick search is case-sensitive. How can I make case-insensitive? I think that it used to be case sensitive, if it's a "feature" can we have the old, faster, the 'quick search' in the back?

  You can open the normal search bar via ' Edition > Search "(Cmd + F) and remove the check mark in the box"Option match case.

  • Find Toolbar Tweaks: https://addons.mozilla.org/firefox/addon/2585

• is it possible to print the name and the location on the page documents

  I would like to print the file names and locations of my documents Pages, as well as the text of the documents. used to do in Word all the time. can't find this print option across Pages.

  Apple has intentionally excluded any iota of features of Microsoft Word of Pages. Thus, it is not a clone of Word and does not use a Microsoft Print panel. You have no ability to assign printing header or footer fields in the print output from the OS X Print Panel.

• Case-sensitive option in find and replace the chain

  Hello!

  Attached is my problem.

  I'm looking 'toto' in the 'toto + tototi' input string and replace 'toto' by 'A0 '.

  I want to "respect" the input search in order to get a string result: A0 + tototi

  Are there options allowing for case-sensitive option?

  BR,
  Vincent

  You use search and replace with Regular Expressions selected (the little asterisk icon).  \b represents a word boundary, basically the imaginary space between the character is a letter, number or underscore, and the other is not.  In other words, it is an assertion of width zero, which means that \b does not capture anything.

  For example: toto is toto, toto1, toto_1 etc.  toto\b matches the string 'toto' when it is followed by something that is not alphanumeric or underline, is why it will not match toto1 but will match toto + or 'toto '.

  Go to pcre.org for more information or follow the assistance detailed in LV I assumed you knew because you need to turn on Regular Expressions in S & are so I assumed that you had done.  You've probably done without being aware of what you were doing.

• How to disable printing depends on the location for 'all users '.

  I need to disable the "Location-Aware Printing" for "All Users" on the laptops that we use in our company.  Is there a way to do it, or is it one per user (HKCU) power only.

  Thank you

  Mike

  Hi Mike,

  The question you posted would be better suited in the TechNet Forums. I suggest that you post the query in the link.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  Hope this information helps you.

• Looking for ways to solve the following problems of these messages: "check the temp environment variable. "Unable to print the document. "You don't have permission to save in this location."

  Looking for ways to solve the following problems of these messages: "check the temp environment variable. "Unable to print the document. "You don't have permission to save in this location."

  Hi Michael,

  Please follow the link and see the issue:

  Cannot print or preview before printing a Web page in Internet Explorer: http://support.Microsoft.com/kb/973479

  If the problem is specific to MS Word, then I suggest you to post the same question in the forums of MS Office for assistance.

  Microsoft Office Forum:

  http://answers.Microsoft.com/en-us/Office/Forum/Word

  I hope this helps.

• Entity and attribute transformation of names (case-sensitive) to the relational model

  Hello

  For the names of entities and attributes, I would use camel casing, e. g. AccessRightGroup (or the right access group) and its translation to the relational model in the Table name access_right_groups. I found, I can do in the entity properties > General > abbreviation preferred by writing the name of the table you want in this area. But I guess that there is a more elegant way by setting that breaks are transformed into small capital and underlined and entity (set) becomes plural as table. Is there such a possibility?

  How that would make the camel case attributes?

  Best regards, Robert

  Hi Robert,.

  case-sensitive, you must set 'Title case' as a separator for logic model in the design properties dialog box "settings > naming standards '-c' is for this form of the names AccessRightGroup; for group of access rights that you need not change anything - the default separator is set to 'space '.

  For the plural in the relational model, you need a glossary with defined plurals - however it only works for the entity name unique term. I logged an ER to change this.

  Tiny in a relational model - well you must set to relational model - in the Properties dialog box - "(Naming options > Table, cas de caractères...-mis à baisser et le nom sera mis dans cette affaire àle cours de la transformation) - otherwise you always can use the script provided with Data Modeler to convert the names of all the lower/upper cases."

  Phhilip

• Need to print the results of a query in a CASE statement

  I want to print the results of a query in a CASE statement:

  SELECT RUN_STATUS

  Of

  (select check BOX WHEN COUNT (ROW_WID) = 0 THEN 'NO JOBS RAN AFTER' |) (select sysdate - XXAFL_MINUTES MINUTE)

  END RUN_STATUS

  of W_ETL_RUN_SDTL

  where START_TS >

  (sélectionnez sysdate-MINUTES de XXAFL_MINUTES)) where RUN_STATUS is not null; e

  The query above subtracted 5 minutes from SYSDATE and he shoots XXAFL_MINUTES. I am doing this because we could change the number of minutes in the future. I want to print the number of minutes in the case statement.

  If I execute this statement, it throws an error stating:

  ORA-00937: not a single group group function

  00937 00000 - 'not a single-group function.

  * Cause:

  * Action:

  Error on line: 1 column: 96

  How can I include "select sysdate - MINUTES of XXAFL_MINUTES" in the CASE that it calculates the number of minutes and it prints with the results.

  Thanks in advance!

  Hey guys,.

  I found the solution:

  SELECT

  RUN_STATUS | TO_CHAR ((sélectionnez sysdate-MINUTES de XXAFL_MINUTES), 'HH24:MI:SS')

  Of

  (select check BOX WHEN COUNT (ROW_WID) = 0

  THEN "NO JOB RAN.

  END RUN_STATUS

  of W_ETL_RUN_SDTL

  where

  START_TS > (select sysdate - XXAFL_MINUTES MINUTE))

  where

  RUN_STATUS is not null;

  The output:

  NO JOBS RAN AFTER 09:07:54

  Thanks to you all!

• Application of Web service on weblogic 10.3.6 (Illegal treatment target instruction ("xml"), xml (not case sensitive) is booked by the plug.)

  I built a server service web application in 11.1.1.7 Jdeveloper and deploy it on weblogic 10.3.6 to the demands of the external partner is used.

  I tested the app using the tool SoapUI and everything works fine and I get as a response from the server.

  Use case:

  1 - the customer can not get as a response from the server. They always receive 500 internal error from Server

  2 - I have faced this problem before with other clients because the client sent not writing xml format that is accepted by the server. Problem is solved at the time when they start to send the right xml format.

  3 - newspapers, I see the following stack (part of it): (Google, I knew there's something wrong with xml, the client sends to the server: wso2 - how can I manage this in Wso2ESB that does not Respone to the Client - Stack Overflow)

  4. now I need a way to know exactly what is to reach my server as xml. Is it possible to save the queries coming to the server weblogic. xml Without knowing what will happen on the server, I don't know what is going wrong in the xml file.

  < error > < com.sun.xml.ws.transport.http.HttpAdapter > < BEA-000000 > < could not create a SOAP message because of the exception: XML reader error: com.ctc.wstx.exc.WstxParsingException: Illegal treatment target instruction ("xml"); (not case sensitive) xml is reserved by specs.

  [row, col {source unknown}]: [10,16]

  com.sun.xml.ws.protocol.soap.MessageCreationException: cannot create SOAP message because of the exception: XML reader error: com.ctc.wstx.exc.WstxParsingException: illegal treatment target instruction ("xml"); XML (not case sensitive) is booked by the specifications.

  [row, col {source unknown}]: [10,16]

  at com.sun.xml.ws.encoding.SOAPBindingCodec.decode(SOAPBindingCodec.java:295)

  at com.sun.xml.ws.transport.http.HttpAdapter.decodePacket(HttpAdapter.java:294)

  at com.sun.xml.ws.transport.http.HttpAdapter.access$ 500 (HttpAdapter.java:102)

  to com.sun.xml.ws.transport.http.HttpAdapter$ HttpToolkit.handle (HttpAdapter.java:519)

  at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:253)

  at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:141)

  at weblogic.wsee.jaxws.WLSServletAdapter.handle(WLSServletAdapter.java:172)

  to weblogic.wsee.jaxws.HttpServletAdapter$ AuthorizedInvoke.run (HttpServletAdapter.java:708)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)

  at weblogic.wsee.util.ServerSecurityHelper.authenticatedInvoke(ServerSecurityHelper.java:103)

  to weblogic.wsee.jaxws.HttpServletAdapter$ 3.run(HttpServletAdapter.java:311)

  at weblogic.wsee.jaxws.HttpServletAdapter.post(HttpServletAdapter.java:336)

  
  

  
  

  
  

  
  

  Update 1: I found that I need to add the following lines of code to enable logging on the server. But I thing execution is not to join them and fail before that. No idea how to highlight the execution of any request. Maybe in jdeveloper and weblogic server?

  
  

  System.setProperty ("com.sun.xml.ws.transport.http.client.HttpTransportPipe.dump", "true");

  System.setProperty ("com.sun.xml.internal.ws.transport.http.client.HttpTransportPipe.dump", "true");

  System.setProperty ("com.sun.xml.ws.transport.http.HttpAdapter.dump", "true");

  System.setProperty ("com.sun.xml.internal.ws.transport.http.HttpAdapter.dump", "true");

  System.setProperty ("javax.net.debug", "true");

  
  

  Update 2: I just need to set the following properties of java (-Dcom.sun.xml.ws.transport.http.HttpAdapter.dump = true) in the setDomainEnv this file for the side server, see this link: How to apply Log and response with Java JAX - WS Client and web service server? But how to connect their good in files not just their output in the console?
  

  I am in a position to know what is the cause of the error (Illegal treatment target instruction ("xml"), xml (not case sensitive) is booked by the plug.)

  Update 2 in the question, I am able to see which is reached from the server console. The customer was sending additional labels and with in the body tag, which is not recognized by the server of web service application and it throw the customer 500 internal server error. The problem is solved by sending exactly the XML except without additional or missing tags.