Print using photoshop CC. Error message «cannot print...» Due to the mistake of program"

Similar Questions

• After making some changes I sometimes get the error message "cannot build a review because of a program error? Any suggestion would be appreciated.

  After making some changes I sometimes get the error message "cannot build a review because of a program error? Any suggestion would be appreciated.

  Molloy10 wrote:

  After making some changes I sometimes get the error message "cannot build a review because of a program error? Any suggestion would be appreciated.

  What changes?

  What program?

• Error message "cannot start encryption on the computer services local error 193: 0xc1» encryption services for the installation of the downloaded windows updates.

  Recently (in the last 2 weeks) windows updates have been download but don't install.  I tried to stop BITS, rename my catroot2 catroot2.old and restart with nothing will do.  Continues to receive same error messages.

  Terry,
  You can try the following.

  Reset Windows Update components Then run the update.

  If this does not help then I suggest you run the System File Checker.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems burning an audio cd by using windows 7. error message: windows media player cannot burn some files. To investigate the problem, click on the icon next to the selection to burn the files. (Nothing beside files?)

  I am trying to burn an audio cd after that installation of windows 7 upgraded with windows media player.  It will not work I get the error message. cannot burn some of the files?  very frustrating.  thanx

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon. Mick Murphy - Microsoft partner

• I use Windows vista service pack 2 and when I download an attachment to an email and try to print I get this error message: Error Message 0 X % 1 in the message for %2 file

  original title: Error Message 0 X % 1 in the message file for %2
  I use Windows vista service pack 2 and when I download an attachment to an email and try to print I get the above error message.

  How I can fix

  Hi SusanReid,

  1. what email program are you using?
  2. you are trying to download from webmail or any mail client?
  3. don't download you and save the attachment or open it directly?
  4. What is the brand and model of the printer?

  I suggest to save the attachment and then print.

• When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. »

  original title: could not copy files

  When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy.  The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory.  How can I fix it?

  Hi GloriaZF,

  What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.

  You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.

  I hope this helps.

• I use Photoshop Cs5 on a PC that has been installed by the manufacturer of my PC in 2011, I tried to use it yesterday, and I get an error message saying to re - install the program. I have no knowledge on how to help.

  I use Photoshop Cs5 on a PC that has been installed by the manufacturer of my PC in 2011, I tried to use it yesterday, and I get an error message saying to re - install the program. I have no knowledge on how to help.

  Hello

  Please access "' programs and features'" and uninstall the Photoshop CS5 and access the link as follows to download the program installation of Photoshop CS5 and re - install and activate it with the serial key you have.

  Download Adobe Creative Suite 5 products

  Thank you.

• Canon PIXMA MP160 error message 'cannot communicate with scanner.

  I have a Canon PIXMA MP160, who worked during the scanning of the printer on my computer. Now, I get an error message "cannot communicate with scanner. Installation scanner no longer works. The Canon site suggested looking in the Windows directory for a file named ' USBSCAN. SYS, but my research has not found it

  Installation scanner said that all the files are in place until it reaches the end.

  I received an update of windows on 31/10/2011. It works

• Error message: cannot copy... Failed to create the directory or file.

  I get the Error Message ' cannot copy (a file USB Store n Go): failed to create the directory or file.»  All of a sudden I started getting error message is when I tried to copy to the USB mass storage: "F:" copy on the removable key worked for a proor very long in this message. And there are a lot of empty space.  The diagnosis says that everything works correctly.

  Dear Clarence

  Try first to unplug the mass storage device, then reconnect and format it by Righ click on Format.

  Then try to paste these files on this USB key again.

  If it fails this time then format your USB using HP USB stick formatting to http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=MTX-UNITY-I23839 tool

  Click Download on the page above. Install it and run it. This will guide you through the steps of formatting your USB drive in a few seconds...

  It is also useful for the repair of the almost dead usb keys.

  Concerning

  Zeeshan Ahmad

• Error message "cannot start mssql$ sqlexpress on machine" need help!

  Error message "cannot start mssql$ sqlexpress on machine" need help!

  Hello

  -When exactly you receive this error message? It is at the start of the computer or at the launch of a particular application?

  If you use SQL Express DBMS and are faced with this problem, thanks for posting your query in SQL Server Express Forums for assistance on this issue.

• I want to save my outlook.pst file but get the following error message:-impossible to copy outlook: the process cannot access the file because another process has locked a portion of the file.

  I want to save my outlook.pst file but get the following error message:-impossible to copy outlook: the process cannot access the file because another process has locked a portion of the file. How can I unlock it please?

  You have Outlook open when you save? You need to close.

  Hope this helps

  Post back if necessary

  ___________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Msinfo32.exe generates an Error Message "cannot collect information.

  Hello

  I am running XP Prof with SP3 and made a scan with the perfect system optimizer and it did remove a lot of files he said were copies and since then, Information System says that it can collect Information, cannot access windows management instrumentation software. Windows Management files may have been moved or missing. I tried to use the administrative tools in the Management Console Microsoft and add snap - in following the instructions from microsoft on their site, but still did not help. Also tried to restore as soon as possible and the recovery of deleted files from the optimizer software. Nothing has helped so far. I am also on a network with my laptop which runs on Windows 7, but the have not enabled since I stupidly paid 39.99 for this software now appeasrs to have screwed up my computer. Restoration did do 1 restore and I tried 5 times and it said could not files to an earlier time which is an another prolbem I've had for a while with system restore doesn't work does not correctly. If anyone can help me I would really appericiate it. Thank you my friends.

  PKBISHOP

  Hi PKBISHOP,
   
  The error message occurs if the Windows Management Instrumentation (WMI) service is not started. This can happen if the service is disabled, if a dependent service is not started, or if a problem is preventing start the WMI service. The system information utility will be able to collect information that the WMI service is started.
   
  To correct this information to resolve this problem, see the link below.
   
  Msinfo32.exe generates an Error Message "cannot collect information.

• Empty Device Manager and for error message "cannot create the enumerated device root need to install Parallels paravirtualization pilot".

  Original title: Device Manager empty

  I have Windows XP Service Pack 3 installed in a Bootcamp partition on my Intel iMac. I can detect and install new hardware such as USB keys. However, the Device Manager window is blank - how can I get the window to display the devices connected to the computer? I am also unable to install Parallels tools when I use Bootcamp as a virtual machine. The error message "cannot create the 'root-enumerated device' necessary to install Parallels Paravirualization driver.

  Hey Harcjk,

  For your first question, go through this article.

  None of the items appear in the device list manager when you open
  http://support.Microsoft.com/kb/311504

  For the second question, here are some suggestions:

  Method 1: Uninstall & install Parallels tools

   

  NOTE: we highly recommend you make a backup of the virtual machine before you continue.

  a. start your virtual machine and cancel the installation of Parallels Tools Wizard.

  b. Click Start--> Panel--> Add / Remove programs and remove the Parallels tools in the list of applications.

  c. restart Windows.

  d. install the Parallels tools by clicking on the Virtual Machine--> install the Parallels Tools.

  Method 2: Uninstall antivirus software

  If the problem persists, try the following:

  Temporarily uninstall all the antivirus software to the virtual machine and repeat steps of the "Uninstall & install Parallels Tools" section above.

  Note: Don't forget to install the back antivirus software, once the problem is resolved.

   

  Method 3: Uninstall, clean & install Parallels tools

   

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

   

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  a. If the problem persists, try the following:

  b. start Windows.

  c. go to "Start" > "Control Panel" > "Add/Remove Programs" and uninstall theParallels Tools if it is present.

  d. go to 'my computer' > 'C' drive > "Program Files" > "Parallels" folder and delete the "Parallels Tools" folder, if present.

  e. click the Windows 'Start' menu-> 'run' and type 'regedit'. Click OK.

  f. in the registry editor, go to "My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Parallels" and delete the heading "Parallels Tools" and go to "My Computer\HKEY_CURRENT_USER\SOFTWARE\Parallels" and remove the 'Tools' section.

  g. restart Windows.

  h. now install Parallels tools in the 'VM' menu on the Parallels Desktop menu bar, while Windows is running.

  I hope this helps.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get an error message "Cannot load or launch C:Users\Mike\AppData\Local\Temp\msuospuwo.exe specified in the registry" at startup.

  At startup I get the following error message: "cannot load or launch C:Users\Mike\AppData\Local\Temp\msuospuwo.exe specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry.  I tried to run my antivirus program, CCleaner and system fFle Checker, but the problem persists. How can I fix it?

  Original title: persistent registry at startup error message.

  Hi Mike,.

  Thanks for keeping us posted and share this information with us.

  I would like to run you a SFC scan.

  See the article-

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

   

  http://support.Microsoft.com/kb/929833

  Do get back to us and let us know the status. We will be happy to help you.

  Thank you.

• Microsoft Fix It does not "Windows Script Host gave me the error message: cannot find engine\ 'VBScript' Script script.

  installed Microsoft Fix It.  When I try to launch it I get the message that there is an error during the MicroFix troubleshooting it won't work.  I can only use the online version.

  I had a problem installing a program and products purchased for the program.  Windows Script Host gave me the error message: cannot find engine\ script 'VBScript' Script 'C:\Users\debra\AppData\roaming\MyEQBoutique\Boutique Registry Entries.vbs.  I uninstalled the program.  I ran the SCF.  Ran the clean boot, and then set back to normal. I restored to the previous day.  I ran the scan online to remove malicious whatevers, also, I went and changed all my default settings.  Windows tells me that it is up-to-date.  I have Windows Vista Home Premium, I use Microsoft defender and Microsoft Security Essentials.  What is going on? What can I do else?

  Hello

  (1) have you made changes before the start of this issue?

  (2) have what program you tried to install?

  (3) you are able to install any other software on your computer?

  (4) what fix - it you try to run?

  This occurs if the filevbscript.dll runtime script is not properly registered in the system.

  Try the steps below and check if you are able to run the Microsoft fixit.

  a. click the Start button, type cmd. In the result of the research with the right button on cmd and select run as administrator.

  b. type cd %windir%\system 32 (Note: there is a space between the system and 32) and press ENTER.

  c. type regsvr32 vbscript.dll in the command prompt, and then press ENTER.

  d. type regsvr32 jscript.dll in command prompt, and then press ENTER.

  If the registration was successful, you should now see the following message is displayed:

  DllRegisterServer in vbscript.dll successful.

  e. now, try to run the Microsoft fixit.

  See also:

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  After the question in the following forum if the problem with fix - it persists.

  http://social.Microsoft.com/forums/is/fixitcenter/threads

  Let us know if that helps.