Printer Envy 5660: How can I have a different destination after a scan

Similar Questions

• HP Envy 7640: How can I remove a computer from the list "Scan to" on HP Envy 7640?

  I have a computer on my list of "scan to" on my HP Envy 7640, which is no longer in use.  How can I remove the computer name in the list?

  With the help of Apple / Mac OS X Yosemite

  Thank you!

  I can't help but wonder if the computer is still on the same network as the printer. Even if you have no more than the computer, you may give it to someone else who uses the same network as you? I think it's weird that the printer is always to see the computer. If this computer and the printer are not on the same network, perhaps to restore the printer to the factory settings would help. To do this test, please complete the following steps;

  1. On the front panel of the printer, scroll down to the second main menu screen by sliding your finger to the right of the screen to the left
  2. Choose settings, or Setup
  3. Select printer maintenance
  4. Go to restoration
  5. Choose both restore factory default settings

  Once this operation is completed, you will need to reconfigure the printer to your wireless network. Please let me know if this is the case. Thank you.

• How can I have two different notifications for email and texts?

  I have the audio files installed on my card, but cannot find a way to do this.  Any ideas?

  
  

• I have a document that print bad. How can I reprint it for eprint?

  I have a document that print bad. How can I reprint it for eprint?

  There is no option to reprint jobs ePrint.  If the document printed wrong, you simply return ePrint printer job.

• With the help of Windown 10, not all pdf documents launch Adobe Reader DC.  As a result, I have not all normally available printing options.  How can I get Reader to open the default player.  I need to clear, step by step direcitons, please.  Thank you

  With the help of Windows 10, not all pdf documents launch Adobe Reader DC.  As a result, I have not all normally available printing options.  How can I get Reader to open the default player.  I need to clear, step-by-step instructions, please.  Thank you

  Hello

  Please visit the following link to set the reader as default PDF reader.

  Restoration of Adobe Acrobat Reader in the default PDF Viewer

  Concerning

  Sukrit diallo

• I have a form in which the text area can be developed to accept more text, but the text does not appear on the printed copy.  How can I get the text to print?

  I have a form in which the text area can be developed to accept more text, but the text does not appear on the printed copy.  How can I get the text to print?

  Hi robinm6200,

  Make sure that you have selected 'Document and annotations' under 'Comments and forms' when printing.

  

  Kind regards

  Nicos

• I want to change the default printer for Firefox how can I do this?

  When I choose to print in Firefox it uses my printer copier not my default printer. So how can I change the default printer for Firefox?

  In Firefox 'by default' is the last used printer. If you switch to a different printer, Firefox to remember that a new 'default' - unless you have disabled this setting in all: config. Print.save_print_settings

• Want 5660: How can I load paper 5 x 7 to 5660 want?

  5 x 7 is mentioned in the user manual as one of photo papers suggested.  I bought some, now how I load into the 5660, please?  The photo tray seems to accept only 4 x 6.  Worked great with the paper of the sample that came w/printer.

  Hi @byronw,

  I'd love to help you load paper 5 x 7 in your printer Envy 5660. 5 x 7 is considered more paper, that being said, please, look at what I found in the Manual (p. 11) that I thought would help:

  To load small-size paper

  1. remove the photo tray. If you don't see the photo tray, remove the output tray on the printer.

  2. load paper.

  ● Insert a stack of photo paper into the print photo tray to the bottom side.

  ● slide the photo paper until it stops.

  3 push the photo tray in.

  4. change or keep on the screen of the printer paper settings.

  To load paper large format

  1. remove paper tray, slide the guides to the width of the paper to the outside and then remove any previously loaded media.

  2. load paper.

  ● Insert a stack of paper into the paper tray with the short edge forward and the print down side.

  ● Slide the paper forward until it stops.

  ● Slide the width guides of the paper inward to the stop on the edges of the paper.

  3 push the paper tray in.

  4. change or keep on the screen of the printer paper settings

  I hope this helps. If you need assistance please do not hesitate to let me know!

• How can I have a show of name (Harry, phone etc.) device upward in the "devices" section of the Capsule of time instead of the IP address of devices?

  How can I have a show of name (phone Harry, etc.) the device upwards in the section "connected devices" AirPort app for the iPhone and iPad utility?

  Sorry, not the answer you were looking for... but you can not... at least not reliably.

  It's pot luck whether the real device name will be displayed, the IP address assigned to the device will appear. or the MAC address of the device will appear.

  Apple still has not corrected it after many years.

• my continuous wireless printer going offline - how can I 'stabilize' the connection '.

  my continuous wireless printer going offline - how can I 'stabilize' the connection?

  Hello gerrie,.

  What I would do is put off the printer and the router so

  -essentially them turning off for about 10-15 seconds

  -and then feed the router back on waiting for all the lights turn on completely

  - and after that is back in the market I would re - turn on the printer and re-establish the connection between the printer and wireless network

• My iphone 5 still cannot send a message even if theres a full bar signal, I'm sippos and how can I have a facetime?

  My iphone 5 still cannot send a message even if theres a full bar signal, what I am sippos

  And how can I have a facetime?

  that I am I supposed to do.

• How can I automatically open e-mail after I have delete current email

  How can I automatically open e-mail after I have delete current email

  Are you talking about the built in Mail.app?

  You use the view of the 3 column?

  If your mail is highlighted in the 2nd column, and then you remove it, it will move to the next email overview.

  Use the mail on your Mac - Apple Support

• How can I have my network monitoring airport to see all connected devices?

  I would like to change the preferences of my Fritz! 1750th Repeater. I'll pass the LEDs of the question, but I can't access the device as http://fritz.repeater.

  Thank you for helping me!

  Sorry, we can not help you on a Fritz! Question of Repeater, but if you want an answer to your question of... How can I have my network monitoring airport to see all connected devices? ........

  On your MacBook Pro...

  Open Finder > Applications > utilities > AirPort Utility

  Hold down the option key on your Mac when you double-click on the image of your AirPort Base Station (we assume that you do not have an AirPort Base Station)

  A summary sheet opens to show all Wireless Clients that are currently connected to your network.

• How can I find the ink levels when I scan, which allowed me to print.

  How can I find my ink level when I scan, allowing me to start printing.

  Hello Maureen,.

  Find things such as ink levels is a function of the printer driver.

  This is provided by the manufacturer of the printer, and they are the best resource on the operation of their particular drivers.  Therefore, it is best to ask the manufacturer of the printer for advice on this issue.

  Sometimes, there is an icon in the taskbar that you can get this information.  Yet once, it is a function of the driver and the printer software.

  Best regards

  Matthew_Ha

• How can I have Windows 8 and Windows XP on a computer at the same time?

  Now, the computer is Windows XP. My ICT SBA require to use windows XP for better compatibility. How can I have 2 types of windows on 1 computer?

  A few months ago I installed Windows 8 client Preview of XP and I deleted the WIndows XP.
  Now, I have two systems at the same time, so I installed XP again, but the two windows of the failure to run (DLL and kernel problems).
  Then I installed XP again and the format of the drive that contains the Windows 8, I finally install XP on this drive.
  After that, I tried to install version 8 for Windows but I said that I can't keep the XP data, instead of keeping the whole OS.
  I find some articles online, but they introduce only have Windows 7, I can add XP...
  (I have two internal hard drives and an external hard drive)

  It pretty much applies to Windows XP, too. (Microsoft has removed most Windows XP of the database-specific help pages already.)

  Don't forget that Win8 PR is still a beta version.

  PS: Speaking of upgrade to Win8, you might find this interesting-online http://windowsteamblog.com/windows/b/bloggingwindows/archive/2012/07/02/upgrade-to-windows-8-pro-for-39-99.aspx

  [Last updated - July 11, 2012, 06:27 UTC]