Problem after installing CS5

Similar Questions

• Boot problems after installing Vista SP2 (KB948465)

  I installed SP2 via update.  During the update process there was a power failure.  After that (I don't remember if it's immediately after, or if a few days elapsed) I had problems with the startup.  Initially, seemed the Startup Repair to fix the problem, but not permanently, and the Startup Repair had to be used repeatedly just to start.

  After a few times of what is happening, Startup Repair did not turn, and the PC wouldn't start.  After about 5 attempts using the decision-making power, sometimes choose the Startup Repair, sometimes choose to load windows normally, he did start.
  I immediately did a system restore to return my PC before SP2 was installed.

  After the restoration of versions prior to SP2, Windows Update showed that the SP2 update failed.  It was on 9 November.  As I need my computer, I didn't reinstall SP2 until I had finished this work.

  As I thought that the problem is probably caused by the power outage, on 10 September, I reinstalled SP2.  Windows Update show no SP2 as an available update, then I downloaded and installed the standalone update.

  Between the 10th and today, 14, Windows Update has installed more than updated.

  Today, I was unable to start for the first time since the reinstall SP2 and Startup Repair has allowed me to open a session.
  I tried to uninstall SP2 via update.  The first part of it seemed to work, but when it came to reboot, the PC stopped at the end power to the bottom of the procedure.  I used the power switch to turn the PC back on.  After startup, the PC told me that deletion failed.

  Then I tried the system restore.  Unfortunately, the first available restore point was post - SP2 installation.  I restored it for the point that is as close as I could.  I tried to uninstall SP2 again through Windows Update.  This time, I receive a generic error message immediately (less than a second) - it does not attempt to go through the configuration - restart the procedure.

  I haven't restarted my PC since then.  Most updates have been downloaded automatically, and the PC tells me that a restart is required.  I'm a little worried that I will end up with a completely insensitive PC.

  I use an Acer Aspire X 3200 with Vista home premium pre-installed.  I don't have a Vista disc.

  Hello, Alex

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem after installing Windows Service Pack 3 on Windows XP Home edition error Media pc: files which are required for Windows to run properly have been replaced by unknown...

  Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc

  My pc runs Windows XP Home Media edition.  I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions."  To maintain the stability of the system.  Windows must restore the original versions of these files.  Install your Windows XP Professional CD2.  I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3.  How can I stop this happening?

  Hello

  Step 1: I suggest you perform the SFC scan on the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Problems after installing KB978338 on Windows Vista SP2

  I met a problem after installing KB978338. The update installs without error or problem, but the system is extremely inadmissible after the reboot. The "\Windows\system32\config\systemprofile\desktop is not accessible" error, and the system is practically unusable. Normally opens the Task Manager and system seems inactive, but you try to start a new application from the Task Manager gave an error "hose is not valid.

  System is Vista Home Premium SP2 installed without any obvious problems before the update. Start the system restore and go back to immediately before the update of the results in the system back to normal functionality and responsiveness.

  I've never seen or either of these mistakes before and my research has not yet been able to find something similar, so I am at a loss to start this kind of problem with an update of troubleshooting.

  Please tell us how can I still troubleshoot or solve this problem.

  Thanks in advance.

  JohnBrown

  Halifax, NS

  So I "hid" the update and you call this one closed without resolution.

  While the overall rating of gravity for KB978338 is moderate (critical vs), it of still a security update and must be installed.

  Repost:

  See the section "How to get help" of http://support.microsoft.com/kb/978338

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Purchasing problems of installation of the security updates Microsoft may also visit the following page for assistance:
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Hi, I have a problem abt install cs5 premium production on my macbook!

  Hi, I have a problem abt install cs5 premium production on my macbook, my macbook version is 10.10.5, and it says "there is no set application to open the document" install.sig"... so how can I solve it?!, thank you!

  You must download a dmg file.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I have a problem after installing, I try to open applications, but I get an error message: "it is impossible to open it properly (0 x 0000022) application, click ok to close the application" anyone of you could help me? I paid the monthly fee

  I have a problem after installing, I try to open applications, but I get an error message: "it is impossible to open it properly (0 x 0000022) application, click ok to close the application" anyone of you could help me? I paid the monthly rate but I can not use any application due to this error

  Hello

  This link may help: the application failed to start properly (0xc0000022).-Microsoft Community

  Kind regards

  Sheena

• Hi I have a problem after installing my CS6.  He repeats to me that msvcr100.dll was not found

  Hi I have a problem after installing my CS6.  He keeps saying that msvcr100.dll was not found?

  Download the runtime MSVC 2010 from Microsoft and install it.

  Mylenium

• problem reinstalling FB4 bonus after installing CS5 MC on windows 7 64 bit

  Hello

  I was hoping I could get help with a problem: I filed a technical request (ticket) with Adobe but I also wanted to reach out here.

  Background:

  I installed FB4 Premium in March and had no problems with the download or installation - everyhting worked very well. Yesterday I installed CS5 MC and installing it wrote debugging flash player versions that come in FB4 premium with standard flash drive too. Of course, that won't work with FB4 so I need to find a way to reinstall the debug version of flash player plugin and active x. After trying in vain for so that to do this, I decided that it would just be easier to uninstall and reinstall the FB4 download which I still had on my machine, as this comes with players of debugging that I need. Big mistake. Now, I can't reinstall FB4. I get the following error messages when executing the installation set-up (see downloaded the error message below image). Any thoughts on how I can fix this? I tried several reboots, installations and even re-downlaoded FB4 again from the Adobe store. It seems that the MC5 presecne caused this somehow? I'm running windows 7 pro 64-bit. Moreover, I understand how to reinstall the flash debug player-(too late) I should first run a script to remove the existing flash rather drive than to simply uninstall it. If someone needs the script or help on this made me know.

  Hanks a lot - it left me speechless.

  Bob

  

  Hi Bob,

  CS5 MC includes FB4, so after MC is installed, it is not necessary for installation FB4 separately.

  The standard compared to the Premium editions are controlled by the various SNs:

  -If you are in CS5 trial mode, you will always be in mode Premium for FB4

  -After you have applied a MC CS5 serial number, you will be in mode Standard for FB4.

  [Side: I agree that MC should include award-winning FB4 instead of the standard, but that's another story.]

  If you want to upgrade to premium Standard FB4, there are master instructions for how to do this posted here (among others):

  http://forums.Adobe.com/thread/630566

  -Chris

• Problem installing Flash Player after installing CS5

  I installed CS5 Production Premium.

  A few days later, I noticed a message of Windows 7, I have to uninstall and reinstall Flash Player.  A link is provided to the Adobe Flash uninstaller program.

  I've uninstalled it.  Now when I go to the Adobe Web site to reinstall the Flash Player, I get a message saying that it is not the latest version of Flash Player.

  I tried reinstalling Flash from the DVDs of CS5, but I still can't play Flash sites.

  Help please.

  Hello

  Please, try the steps in uninstalling of:

  http://labs.Adobe.com/downloads/flashplayer10.html#uninstallnotes

  HTH,
  Amel

• Can not update after installing CS5 for hard drive nine, help?

  I installed CS5 Design Premium for my new hard drive, the installation was successful. However, the update has failed. Feedback from the failure: "there was an error downloading this update. Quit and try again later. "When I press the customer support for comments, he directs me to a web saying:" error "this serial number is not for a product calling..." "" When you install an upgrade or upsell.

  So, I ask for the help of discussion online and asked me to seek help from the Forum after got my serial number.

  Help, please.

  Thanks HK online help that does not give me the solution immediately because CS5 support has ceased. However, she suggests to find and install Adobe Application Manager 5.0. However, I have not found the software but I found one (probably 8.0). This is the application for creative cloud Manager.

  After that, I ran the new update and the problem is solved with an exception handler extention that update is still capable.

• System restarts continuously after installed CS5

  I have a workstation CS5 here I took out of service a few months ago because he was showing signs of corruption of the operating system and possibly a virus. After you play with it for a while, I did a rebuild of bare metal, start of shaped both drives and reset the default system BIOS. The system has worked well for 6-7 hours during the installation of Windows and configuration, driver DL and update, etc. After that I installed CS5 Master Collection, he returned to his old behavior.

  ASUS M4A88T-M mobo, Athlon II CPU, 8 GB of RAM, 250 GB boot drive, data of 1 TB, crappy mobo ATi graphics card with NVidia GTX260 primary, Win7 Home Premium disc.

  The system starts and gives a login screen, if I do nothing, 2 minutes later he made a stop and restart. If I connect to one of the two users accounts, he gets to load the Office before saying "Disconnection" and then stop and restart. This is the behavior that led me to consider out of service (and resisted all attempts to fix-I couldn't even turn off before CS5 it would turn). It runs in safe mode a bit longer (in fact, it would HAVE before--did not since reconstruction), but by selecting "not automatically restart" at the time of the start-up has no effect.

  It is possible that it is a hardware fault or firmware, but the quirk of the system works fine until CS5 was installed points to something has changed to a configuration of boot/startup/initial level, well before any CS5 app is started.

  I moved since long CS5.5 and CC, but I maintain this system for work on some shared customer projects. I have little need back up soon. If anyone has any better ideas I'll try a new card mother and (if necessary) an another reconstruction. Very frustrating...

  ANY ideas on what aspect of CS5 could be the cause and how to enter and fix it without yet another reconstruction and another license to success that will probably require a call to Adobe of difficulty? I think it must be some remaining fragment of the instructions of the Windows Installer, try to finish a step of the installation and not come out. Or...?

  Found. It was an incredibly evasive bootkit TDSS virus who survived a format of bare metal and OS install and expressed only by chance. Headless Windows malware tool he and TDSSkiller stomped out. All updates not installed, no other problems. The question, and more of the virus has been actively doing, was that it prevented a security update critical installer, which has created one list of other problems related to the update.

  By far, the malware nastiest I ever had to deal with. But fixed.

  Kudos to Kaspersky to make the available TDDS remover for free.

• iPhone 6 problem after installing IOS 10.0.2 - phone app keeps freezing for 30 seconds

  After installing IOS 10.0.2 on my iPhone 6, the phone app keeps freezing when I open it and remains frozen for about 30 seconds.  Then it closes its doors.  Then only can open and use the phone/directory.  Does anyone else have this problem?

  My husband and my phone do the same thing. We are constantly reset. Very frustrating!

• Re: Satellite L300 - problems after installing Windows 7

  Hello

  I have a Toshiba Satellite L300 bought with Windows Vista 32 bit about 4 months later, I got my Windows 7 64 bit done.

  1 my laptop has startup problems after I installed the drivers give him additional drivers to go, but I have downloaded drivers for Windows 7 64 bit

  2nd I hear music and want to hear the next song is what I use, but not net if the keyboard fn +? don't not go and play / pause next thank you Stop and media player tased funtionieren not only the weis tase of modest silence

  P.s. to translate with google

  Thanks in advance
  Patrick

  Hi Patrick,

  To be honest, your ad is very difficult to understand and I don t know what you mean exactly.

  According to your assignment, it seems that you need a driver and you can get all the drivers here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  In regards to the FN keys you have Toshiba Value added Package, and Flash Cards Support utility. Everything can be downloaded from the official page of Toshiba.

• HP Officejet 7612: analysis of problems after installing Windows 10

  After installing Windows (prior to Windows Vista) 10, scan documents with my HP Officejet 7612 became a hell of a job.

  Printing is no problem.

  With Webscan, I can only scan and save 1 page at a time, I can not scan several pages of the document 1 more.

  I downloaded "Extended Scan" but when I try to use this app, it says "year error occurred while scanning" without more information.

  With "HP Scan and capture" I can't scan the size of A3 paper full of documents and there seems to be no possibility to change the size of a3 paper. Maximum size is 'legal letter '.

  Same problem with "Windows Fax and scan."

  Are there other ways to recover the possibilities of full scan from my HP Officejet 7612?

  Hello
  
  Thank you for using the HP Forums.
  
  You can download and install the software COMPLETE features of HP printing for your operating system:

  The following resources will help you:
  
  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
  
  Hope that helps.

• DVD problem after installing Win XP Service Pack 2

  After installing XP Service pack2 son of college clicked on a question about activation of WinDVD 5 for Toshiba and now my DVD does not load the program. How can I fix it, remimbering I need help step by step?

  WinDVD is the least of your problems: WinXP SP2 should be installed no later than October 10 2006!

  If the computer running Windows XP Gold or SP1 until earlier, may not be a critical functional application of antiviruse protection installed and 3 + years of security updates have not been installed.

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs or IE upgrades and before installing your new anti-virus application (which will require WinXP SP3 [1] needs to be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ================
  [1] extended for WinXP SP2 support ends July 10, 2010. After this date, the computers running under that WinXP SP2 will NOT be offered for additional updates of critical security, automatic updates do not work, and site Web Windows Update won't be available until SP3 is installed.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft