Problem assigning vShield edge licenses

Similar Questions

• VShield Edge Configuration

  Hello

  I recently installed vshield Edge:

  There are two device that have been added to the inventory...

  I set up an internal IP address as my private subnet AND an uplink to have a public IP... and I configured the default Gateway to match my public by default Gateway...

  now I have a machine virtual on my private network that I change the gateway is the IP address assigned to the internal interface of vshield Edge... But it is still not Internet ping!

  Am I missing or wrong configured something?

  Help, please

  Thank you

  Hello

  The reason for two devices could be that you may have installed Edge in HA mode.

  Coming to your network problem, check the following.

  • Check if you have applied the SNAT rule on the external network. In this, the initial INVESTIGATION period should be your private IP network and the translated IP must be one (or) range of your public IP addresses. You must allocate under the IP translated before using NAT.
  • Check if the firewall is disabled (or) added with one exception.

• VShield edge Nic

  Hello world

  I installed VSphere 5.5, 5.5 VCloud and VShield 5.5 for a test. Everything seems fine. But when I create an organization VDC and add an EDGE gateway for him, the automatic system create a VM VSE under "system vDC". Virtual machine contains multiply network cards, including two he uses for the external network and the Organization's network. But there are still many that connect to a standard switch named 'None '.

  Although it works well, the problem is I can not migrate or do his host in maintenance mode. During the migration network interface adapter, it shows"2 use 'none' network, which is not accessible. »

  Does anyone know something?

  Thank you

  This should be a non-issue.

  Each vShield edge device has 10 NIC cards.  One will be attached to a given network (an external, one internal).

  The 'None' network, a group of port assigned.  This does not block vMotion does not happen, and I was

  Even if you get one! ------warning message, you should still be able to click Next and complete the vMotion.

  The only way you would be blocked from vMotion is if one of the two real networks were somehow connected to a specific host.

  Can you provide a screenshot of it with the next button grey and everything that is not a warning to the network no?

• SSH on vShield Edge using Java CCES

  I am trying to connect to vShield Edge using jsch for SSH connection library.

  Connection to a linux server it works perfectly, but connected to the vShield edge server, the output is:

  vtysh: invalid option-'c '.

  Try "vtysh - help ' for more information.

  What it means?

  The connection seems to work correctly, I think the problem is the command I want exec ('list' command).

  I tried many commands, but I always have the same answer.

  I also used this methos Java to set the Pty:

  (Channel) .setPtyType ("vt100") (ChannelExec);

  Can I define another type?

  Thank you all

  Giovanni

  I was determined to uisng the ssh-tool Java library

  You can retrieve the lib since this link sourceForge: SSHTools | Free software on SourceForge.net downloads

  And here is my code.

  Was indeed a problem of reading of the result of the command, but it should be simple to solve.

  public {} public static void executeSSHCommand (String username, String password, String hostname, string command)

  SshClient ssh = new SshClient();

  PasswordAuthenticationClient auth = new PasswordAuthenticationClient();

  int result = 0;

  Session SessionChannelClient = null;

  OutputStream out = null;

  BufferedReader in = null;

  try {}

  SSH. Connect (hostname, new IgnoreHostKeyVerification());

  auth.setUsername (username);

  auth.setPassword (password);

  result = ssh.authenticate (auth);

  If (result! = AuthenticationProtocolState.COMPLETE) {}

  System.out.println ("authentication error");

  }

  session = ssh.openSessionChannel ();

  session.startShell ();

  out = session.getOutputStream ();

  out. Write (Command.GetBytes ());

  in = new BufferedReader (new InputStreamReader (session.getInputStream ()));

  Read string = null;

  While ((read = in.readLine ())! = null) {}

  System.out.println (Read);

  }

  } catch (IOException ex) {}

  }

  }

  Hope this helps others :-)

• VShield endpoint license - vSphere 5.0/5.1 - TrendMicro Deep Security

  Hello

  as you probably know, the license of endpoint vShield is now includede in all editions of vSphere 5.1 and kits (besides essentials).

  I am about to install Trend Micro deep Security on a vSphere installation 5.0. Now someone if you must upgrade to vSphere 5.1 to have vShield endpoint licenses available or if you can stay on 5.0?

  My problem is that TrendMicro Deep Security 9.0 (which supports vSphere 5.1) is not yet published. Deep Security 8.0 doesn't support vSphere 5.1 - only vSphere 5.0.

  best regards

  Your safe,

  I have an older version of vSphere. How can I get the endpoint feature?

  All customers of vSphere 4.1 and 5.0 with active support contracts

  have the right endpoint, without extra charge. To learn more

  information, go to the page of vSphere 5.1.

  see link for more information below:

  http://www.VMware.com/files/PDF/products/vcns/VMware-vCloud-network-security-FAQ.PDF

• vShield Edge balancer to load within vCloud Director?

  Hi all

  I had a long week, installation and configuration vCloud Director. So far, it looks great.

  However, I wanted to create a paralytic with 2 web servers and a LoadBalancer (vShield Edge device) in front of them. I just don't seem to be able to find anything about how I activate on the web site of vCloud Director. I can do the NAT and firewall, but balancing is missing ... I'm sure it's there somewhere, I'm just not see it!

  Can someone point me to the right direction?

  Bgrds,

  Finnzi

  This requires the additional license for vShield edge and configure vShield to vCenter PLugin.  There is no user interface in vCD interface to configure the load balaning VSE again.  1.5 introduces the possibility to configure VPN (if authorized), through vCD, but not the LB function again.

• Cannot resolve the problems BIOS lack family license for windows 7 Edition error

  I windows 7 error code 0xc004f063 BIOS missing required license. This without reason, while using my computer, after that activation was made months ago. Trying to activate by phone (as recommended) cannot be used as there is no option in the activation menu. I followed all the steps recommended to activate by phone, but the menu does not appear this option so I can't find the phone number to call. What will I do to solve the problem? The windows license is genuine and is preinstalled on my laptop. I bought the laptop to the United States while traveling a couple of years back, and now I am living in Qatar (expat).

  Try the following:

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link 'change product key '.

  Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• Still having problems with my perpetual license Adobe CS6 after CC

  Hi everyone, I still have problems with my perpetual license Adobe CS6 after upgrade to CC and terminate my subscription. I did it in October, and of course he had regained all my applications CS6, making it unavailable. I was advised to uninstall my Adobe (CS6 and CC) software and then reinstall my CS6 collection here. I did and as it has helped my Photoshop, all my other apps still get the same dialog box, I received before; telling me to renew my subscription to the CC. It will not happen, all I want is work and back collection CS6. Any help would be appreciated.

  After uninistalling cc, you should vacuum by the use of the Adobe Creative Cloud cleaning tool to solve installation problems, restart your computer and then install cs6.

  you might try starting the vacuum now (to clean the cc) after installing cs6 to see if that helps.

  Open your problematic cs6 programs, and then click Help > activate.

• vShield edge # configure terminal

  vShield-edge-17-0 # configure terminal

  % Unknown command.

  WTF? The CLI became useless between some exits or something? I'm quite sure I've done this before

  5.5.4 - 2504419

  Ah right, everything is done from the cli of vShield Manager device. Silly me

• 131:4 a problem occurred with the licensing

  Hello

  I have Adobe CS5.5

  For these last two days I tried to reinstall it and have been

  Impossible to do successfully. I tried different components and the

  immediately. I uninstalled and reinstalled several times and

  used the Adobe as well cleanup tool.

  Problem seems especially with permissions that tell me I need

  Administrator permissions, but as far as I can tell I'm the administrator.

  Error messages:

  Exit code: 6

  -------------------------------------- Summary

  -0 fatal Error (s), 4 (s), 1 WARNING (s)

  WARNING: DW066: OS requirements not met for {AC76BA86 - 1033 -

  F400-7760-000000000005}

  -Payload: {AC76BA86-1033-F400-7760-000000000005}

  Acrobat Professional - 10.0.0.0

  ERROR: Error 1303.The installation has sufficient privileges to access

  his repertoire: C:\ProgramData\Adobe\Acrobat\10.0.  Installation

  cannot continue.  Log on as an administrator or contact your system

  administrator.

  ERROR: Install payload MSI failed with the error: - 1603 Fatal during

  installation.

  MSI error message: Setup 1303.The error has insufficient privileges

  to access this directory: C:\ProgramData\Adobe\Acrobat\10.0.  The

  installation cannot continue.  Log in as an administrator or contact

  your system administrator.

  ERROR: DW050: the following payload errors were found during the

  install:

  ERROR: DW050:-Acrobat Professional: installation failed

  The last error Code is 131:4 is a problem with the

  license etc...

  Hello

  Please see the following links:

  Errors ' Exit Code: 6, "" Exit Code: 7 "|"» CC, CS6, CS5.5

  Error "exit 6" or "exit 7" | "» Install log | Read, write, file system errors. CS5, CS5.5

  Let us know if that helps.

  Kind regards

  Bani

• saving VShield edge

  I have problems with my edge transport server.  son of 192.168.10 network and I ping to 15.12.51 network.

  OK, so I can ping a private vlan edge unit 15.12.51.1.

  In addition by edge devices I can ping all my ip on the 15.12.51 network.

  Since, however, a virtual machine on the private wire I can only ping my transport server edge and nothing on the rest of the 15.12.51 network.

  I have nat was an ip address on the network 15.12.51 and changed my firewall by default rule (for testing) to allow all traffic.

  seems to not work.

  I'm trying hard to find some record of the conversation attempt between the virtual machine on the 192 network than on the 15.12

  network, but I can't seem to find any connection on the edge device. Do you know where I can find the logging?

  Thank you

  The simple question is, no way to watch the logging of the edge server. of the receipt of applications, etc.

• Bizzare vShield Edge-NAT/VPN problem Post - 5.1 upgrade

  Hoping someone can shed some light on this issue for us - the TLDR is that NAT rules seem to be causing unexpected behavior on the VPN traffic after a vCloud 1.5 to 5.1 upgrade.

  Background: We work with a hosting provider to manage our vCloud environment. Quite simple - 2 ESXi hosts, a few NFS data stores. They have recently updated us of 1.5 and 5.1. For most of our committees, we have just one network of vSE/Routed that connects a subnet to a network of "WAN" and pulls a public IP address from a pool. Send us (NAT network address) and leave (firewall) ports (for example port 3389 for RDP) to the virtual machines selected. Most of these networks also have a VPN tunnel from site to site with a physical Firewall through the internet. After the upgrade, we went and converted our rules to match the period of initial and active INVESTIGATION "multiple interfaces" - effectively subtracts to compatibility mode. Everything was going well (even for devices of vSE always in compatibility mode)

  Question: We first noticed this, when a customer reported that they are unable to access a virtual machine via RDP using it is internal (protected VSE) IP through a VPN tunnel but could access the virtual machine via RDP using its public hostname/IP address. Allow us all traffic between the VPN (firewall has a whole: a rule for VPN traffic). When we connected to troubleshoot (just thinking that the VPN was down), we found that we could connect to any port on the computer through the VPN tunnel except 3389remote virtual. I can ping from the local subnet to the VM troubled on the VAPP network without problem. I was able to connect to other ports that have been opened on the remote virtual machine without problem. I couldn't connect to 3389 through the VPN.

  We thought he could be isolated, but found the question on each VSE we have: If there were a the DNAT rule to translate the inbound for a particular port, this port would be insensitive when traffic through the VPN tunnel that is meant to be the target of the DNAT rule.

  Someone has an idea what could be the cause?

  Looks like it is a problem experienced during the upgrade. These hidden firewall rules will not disappear until the firewall configuration is updated in some way. So go as - upgrade

  (1) upgrade VCD

  (2) update VSM

  (3) to redeploy the entry door to upgrade the edge of the gateway to version 5.1

  (4) convert the firewall rules to the new format (where firewall rules have no management interface or traffic)

  (5) to change the properties of the bridge and the multiple interface mode

  (6) change the specification of the firewall somehow, that is to add a dummy firewall and remove it, turn off, then turn on the firewall, etc..

  Which should cause the deny rule go away

• Assign the PMP license to specific users without TMS

  Hello guys,.

  IM development environment of videoconferencing on my client with this specification:

  -Worm CUCM 11.x

  -Telepresence conductor XC4.0 (only 1)

  -vTelepresence Server ver 4.2 (only 1)

  My problem is im using PMP licenses, no screen. So I really confuse how to assign the license PMP to specific users.

  I already insert the driver's license, like the image below:

  

  the multiparty license on driver State said: I already have 25 license PMP but assign 0. and he said: if I did a conference call, he used license SMP, so the lack of SMP license error always come. So I need 1 license PMP connection to my user / ext to remove the error warning.

  I can do without TMS?

  If can, please help me with this.

  Thank you all.

  Best regards

  Christophe.

  The recommendation is to use use AD to import users in CUCM and TMSPE to make sure that all the same users are added.  However, you may manually create users in CUCM and TMSPE as long as the details between the two systems are the same, including the address of the video as that will identify the user as long as the host of the CMR.

• Having problems C3 standard saying licenses does not work

  Standard that a window came saying Licensing saying have issuesC3 does not work. Try reinstalling and it will not reinstall what is my next step

  Thank you

  Ryan

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• vShield Endpoint Licensing

  Hello

  I'm looking to spend our (Sophos) AV product more to use vShield in our vSphere environment, but I'm a little confused around licensing

  In myVMware, I have a license key for vShield Endpoint 5 and if I go to my downloads option I get is to vShield Manager 5.0.2 which is pretty old now. What I read vShield Manager is now part of vCloud Networking & Security, so I downloaded the latest version of this but I am unable to license it.

  
  

  I also read a VMware KB, who says that he included from vSphere 5.1, but I don't see where.

  
  

  Anyone can shed some light?

  
  

  Thanks in advance.

  OK, this will work without problem.

  "vCloud network and security (POSSIBLE)" is just the new term umbrella for what used to be called subsequently vShield and in this context, it refers only to the virtual appliance of vShield Manager.