Problem between CTS/CUBE/VCS

Similar Questions

• Problem between C40 and Panasonic AW-HE50HE camera

  Hi all

  We have identified a problem between C40 and Panasonic AW-HE50HE camera with HDMI connection.

  The Panasonic camera is configured with the 720 p output, and it can display on a LCD monitor.

  However, we have connected the camera C40 and Panasonic AW-HE50HE with HDMI connection, the C40 show black screen.

  The codec C40 is confirmed as well function and its specification declared support,

  1280 x [email protected]/ * /, 59,94 Hz (720 p 60)

  1280 x [email protected]/ * / Hz (720p50)

  Anyone can provide help for me, thank you,

  Ben Lai

  Hello

  Can you telnet to the codec with the camera connected and check if the codec no video camera and what is the detected resolution.

  Teck Chye

• difference between CTS-INTP-C90-K9 and CTS-C90-K9

  Hello

  What is the difference between CTS-INTP-C90-K9 and CTS-C90-K9?

  Kind regards

  Peter.

  Hi Peter,.

  The partnumber CTS-C90-K9 is basically the codec C90, it only includes:

  C90 Unit Codec

  Remote control TRC 5

  C90 CODEC license key

  Presenter products natural package (APM) for the C series

  Rack mounting kit

  HDMI cables and power

  The CTS-INTP-C90-K9 partnumber is a complete bundle, including almost all of the required components. See the following document:

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/codec-c-series/installation_guide/78-19773-02_Codec_C90-C60-C40_Integrator_Package_for_web.PDF

  Note This touch device isn't on the list, because it is optional, but it can be included in the same package for the partnumber CTS-INTP-C90-K9.

  I hope this helps.

  Paulo Souza

  Please note the answers and mark it as "answered" as appropriate.

• Copy data between the cubes

  I need to copy data between two cubes (using a business rule). I can do using Partition/replication? If so, anyone have an example on how it's done? I am currently using @XREF, but that does not transfer data for the blocks that do not already exist in the database target.
  
  I am very new to this so will get a detailed description.
  
  Thanks for your help.

  You cannot view a partition copy of a business rule. It is intended for the statements of calculation. I guess you could do a jexport or a dataexport and have a batch file that looks for the existence of the file and made a load of it. I don't know that it's a good solution, but if you need to execute a business rule, it might be a way. Of course, you could include the replication in the maxl scriot that is triggered by the creation of file.

• How to set the join in the physical layer between the cube and the relational table

  Hello
  I have a data aggregated in essbase cube. I would like to supplement the information contained in the cube with data from relational source.
  
  I read the article http://community.altiusconsulting.com/blogs/altiustechblog/archive/2008/10/24/are-essbase-and-oracle-bi-enterprise-edition-obiee-a-match-made-in-heaven.aspx that describes how do.
  
  In this article, I think I have to define a complex join between any cube of essbase to my relational table in the physical layer.
  But when I use the Manager to join I am only able to define jooin between the tables of the source of the relationship, but not with the cube imported.
  
  In my case, I'm trying to reach the risk dimension in the cube based on risk_type_code (Gen3 members), with risk_type_code in relationship table dt_risk_type.
  
  How can I create this join?
  
  Concerning
  Hanane

  RelationTable.dt_risk_type = cube. "" Gen3, risk. "

  That's all ;-)

  See you soon,.
  C.

• compatibility problems between DA2400ES and X930D?

  Purchasing a X930D, someone has already tried it with a DA2400ES and/or someone does know of any compatibility issues?

  Hi Zactly,

  You can connect to the TV X930D STR-DA2400ES receiver without any problem.

  There is no problem of compatibility between these products.

  Kind regards

  -Anthony

  If my post answered your question, please mark it as "accept as a Solution.

• Problem between Labview and Melanie 2602

  Hello world

  I think my question is a bit silly, but I really don't know what the problem is. I just want to read my current solar cell by changing the level of my blood to get an IV curve, which is normally pretty easy. So, I created a loop, where I increase my voltage step by step, and used a function named VI from Labview library that connects the Keithley and Labview together, "Keithley 2600 Series.lvlib: Source Level.vi. I start at 0 and increase by 0.01 volt each time. If I use execution of climax, I see clearly the value is correct, and if I go inside the SourceLevel VI, I clearly see the command string: "smub.source.levelv = 1.6," for example, if I want to put my voltage at 1.6V. The attached picture shows a part of my code.

  Despite all this, it is clear that the Keithley does not react properly. It only works v of v 1V, 2V, 3V, etc... but never the values between. My IV curves are ok to read the Isc, but no VOCS. Never happened to any of you? I would be really happy to understand what I'm doing wrong, because it seems easy enough to solve. :/

  Thank you very much!

  It is quite difficult to debug a picture of a tiny part of the code.

  But I'll take what I see.  Your constant shows a 0.01 (comma).  So I guess that you are in a country that uses a comma instead of a decimal point.  I don't see what is happening inside the code Keithly, but I'll make an assumption that he made some conversions where it is expected that the comma is a period.

  Look closely at the code Keithly and see if that explains it.  Try to set your PC to use a period for the decimal point and try to re-run your code and see if it works better.  It is possible that Keithly conversion uses a system, rather than setting using a decimal point, which is that your sentence says it's sending.

• conection problem between labtracer2.0 and Keithley 2400 meter Source

  Hello

  I have a problem of the connection between labtracer2.0 (published by Keithley,) compiled on Labview and Keithley 2400 meter Source.

  My basic connection is Source Meter2400, card GPIB (from Keithley) and Labtracer2.0.

  Although I have installed the run time Visa 4.4, and labtracer2.0, I can't use labtracer control 2400 and get the data from it. The warning information indicate that the labtracer cannot find the run-time information, or there is a script error if I run the test several times.

  In fact, this system is ok last week. The higher present problem after I install Matlab and KTEI for Model4200 of Keithley. Although I uninstall them, the problem still exists.

  I tried to uninstall and install all relevant sofe. But the problem still bothers me.

  I need your help.

  Thank you very much.

  Hello

  I do not know what is causing this problem, but there are some measures we can take to restore your system before installing the new software. This problem is probably caused by registry keys over written by the new software.

  First of all, you need to uninstall all software of NOR. Then, follow the instructions in the word document that I joined the. It will use the MSIblast utility to clean all your registry keys.

  We then, navigate to your System32 folder and delete cvirte.dll and cvirt.dll of your system files. Now, when reinstall us NI-VISA 4.4, the software will reinstall the correct versions of these files.

  This process, you should get back to where you were before the offending software.

  Thank you

• Communication problem between the FPGA VI and VI host-PC

  Dear Sir

  I am trying to establish a communication between a FPGA a PC host using the FPGA FIFO.

  The communication still has a few problems and I do not know what cause them.

  LabVIEW gives me the following reason "transfer has not completed within a stated time period, or in the specified number of retries."

  What is the problem with my labview program? How can I solve this?

  The project are attached.

  Best regards

  Beurms Jasper

  Hello, Jasper.

  Based on your feedback that a good approach might be to use DMA FIFO of the FPGA on the RT controller and use the network stream to send all on the network.

  Please note that (based on your original code), may also be useful to take a look at the use of DMA FIFO with interlacing.

  PS: I mention this because there is a limit on how many DMA FIFOs, you can use onach RIOtarget.

• Routing problem between the VPN Client and the router's Ethernet device

  Hello

  I have a Cisco 1721 in a test environment.

  A net 172.16.0.0/19 simulates the Internet and a net 192.168.1.0/24 simulates the net, the VPN tunnel must go to (intranet).

  The net 172.16.0.0 depends on the router 0 FastEthernet, Intranet (VPN) hangs on Ethernet 0.

  The configuration was inspired form the sample Configuration

  "Configuring the Client VPN Cisco 3.x for Windows to IOS using Local extended authentication"

  and the output of the ConfigMaker configuration.

  Authentication and logon works. Client receives an IP address from the pool. But there's a routing problem

  side of routers. Ping client-side - do not work (the VPN client statistics that count encrypt them packets, but not to decrypt).

  Ping the router works too, but decrypt and encrypt customer statistics in VPN packets count progressive

  (customer has a correct route and return ICMP packets to the router).

  The question now is:

  How to route packets between the Tunnel and an Ethernet device (Ethernet 0)?

  conf of the router is attached - hope that's not too...

  Thanks & cordially

  Thomas Schmidt

  -.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- snipp .-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.

  !

  version 12.2

  horodateurs service debug uptime

  Log service timestamps uptime

  encryption password service

  !

  !

  host name * moderator edit *.

  !

  enable secret 5 * moderator edit *.

  !

  !

  AAA new-model

  AAA authentication login userauthen local

  AAA authorization groupauthor LAN

  !

  ! only for the test...

  !

  username cisco password 0 * moderator edit *.

  !

  IP subnet zero

  !

  audit of IP notify Journal

  Max-events of po verification IP 100

  !

  crypto ISAKMP policy 3

  3des encryption

  preshared authentication

  Group 2

  !

  ISAKMP crypto client configuration group 3000client

  key cisco123

  pool ippool

  !

  ! We do not want to divide the tunnel

  ! ACL 108

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

  !

  Crypto-map dynamic dynmap 10

  Set transform-set RIGHT

  !

  map clientmap client to authenticate crypto list userauthen

  card crypto clientmap isakmp authorization list groupauthor

  client configuration address map clientmap crypto answer

  10 ipsec-isakmp crypto map clientmap Dynamics dynmap

  !

  interface Ethernet0

  no downtime

  Description connected to VPN

  IP 192.168.1.1 255.255.255.0

  full-duplex

  IP access-group 101 in

  IP access-group 101 out

  KeepAlive 10

  No cdp enable

  !

  interface Ethernet1

  no downtime

  address 192.168.3.1 IP 255.255.255.0

  IP access-group 101 in

  IP access-group 101 out

  full-duplex

  KeepAlive 10

  No cdp enable

  !

  interface FastEthernet0

  no downtime

  Description connected to the Internet

  IP 172.16.12.20 255.255.224.0

  automatic speed

  KeepAlive 10

  No cdp enable

  !

  ! This access group is also only for test cases!

  !

  no access list 101

  access list 101 ip allow a whole

  !

  local pool IP 192.168.10.1 ippool 192.168.10.10

  IP classless

  IP route 0.0.0.0 0.0.0.0 172.16.12.20

  enable IP pim Bennett

  !

  Line con 0

  exec-timeout 0 0

  password 7 * edit from moderator *.

  line to 0

  line vty 0 4

  !

  end

  ^-^-^-^-^-^-^-^-^-^-^-^-^- snapp ^-^-^-^-^-^-^-^-^-^-^-^-^-^-

  Thomas,

  Can't wait to show something that might be there, but I don't see here. You do not have the card encryption applied to one of the interfaces, perhaps it was not copied. Assuming your description you do it, or should it be, applied to the fa0 and you are connected. Try how you ping? Since the router or a device located on E0? If you ping the router, you will need to do an extended ping of E0 to the ip address of the client has been assigned. If your just ping the router without the extension, you will get sales and decrypts that you declare on the client. Have you tried to ping from the client to interface E0? Your default route on the router is pointing to fa0? You have a next hop to affect? You have several NIC on the client pc? Turn off your other network cards to check that you don't have a problem with routing on the client if you have more than one.

  Kurtis Durrett

• Port-channel problem between fabric Interconnect and vPC N7K

  Hi all

  I have a problem with the Port Uplink channel between fabric interconnect with N7K using vPC

  It's my network for the UCS deployment topology

  

  N7K I configured vPC for red link and green linkto the fabric Interconnect A I has configured the Port-Channel with Member is Port 1 and Port 2, uplink is red link. Interconnection fabric B, I have configured the Port-Channel with Member's Port 1 and Port 2, uplink's green link.

  The interface port-channel on N7K show is good, each port-channel upwards and have all members. But the fabric Interconnnect, when I see in the UCS Manager, the status of the Port-Channel on Fabic A and fabric B dysfunction not more info: no operational Member. Although all the link is a link to the top and I've got the status of the Port Channel is enabled in the UCS Manager. When I see the properties Port 1, Port to Port-Channel 2, I see the number of members status is: individual. This means channel port is not up and no member in this configuration. I want to using the port-channel load balance and more bandwidth for the uplink of 20Gig. I don't understand why?

  Please help me solve this problem, I have to send the screenshot of UCS Manager when I show the status of the Port-Channel and Port-member in port-channel to reach items.

  Can someone help me solve this problem, thanks a lot. References, please include elements for more details on the fault.

  Thank you

  Trung.

  Hello Nguyen,

  Since the two N7k please collect:

  SH cdp nei

  SH run membership in. X int

  SH sum port-chan

  Thank you

  Matthew

• Cannot resolve the problem between ASA - CheckPoint (VPN)

  Hi team,

  I have a strange problem with a L2L VPN between an ASA on my side and a checkpoint as her counterpart.

  The IPsec tunnel works very well, but from time to time, the traffic stop through the tunnel.

  Scenario:

  172.31.250.0/28--ASA---Internet---checkpoint---200.122.x.y/32

  I've done many tunnels between ASAs and control points, but this time we found this:

  access extensive list ip 172.31.250.0 outside_1_cryptomap allow 255.255.255.240 host 200.122.164.165

  local ident (addr, mask, prot, port): (172.31.250.0/255.255.255.240/0/0)

  Remote ident (addr, mask, prot, port): (200.122.164.165/255.255.255.255/0/0)

  #pkts program: encrypt 0, #pkts: 0, #pkts digest: 0

  #pkts decaps: 1148, #pkts decrypt: 1148, #pkts check: 1148

  local ident (addr, mask, prot, port): (172.31.250.8/255.255.255.248/0/0)

  Remote ident (addr, mask, prot, port): (200.122.164.0/255.255.255.0/0/0)

  #pkts program: 27682, #pkts encrypt: 27683, #pkts digest: 27683

  #pkts decaps: 27683, #pkts decrypt: 27683, #pkts check: 27683

  local ident (addr, mask, prot, port): (172.31.250.8/255.255.255.248/0/0)

  Remote ident (addr, mask, prot, port): (200.122.164.165/255.255.255.255/0/0)

  #pkts program: 3579, #pkts encrypt: 3579, #pkts digest: 3579

  #pkts decaps: 10443, #pkts decrypt: 10443, #pkts check: 10443

  Traffic is defined between 172.31.250.0/28 and a single host, but I see three SAs:

  1 172.31.250.0/28 - 200.122.164.165/32

  2 172.31.250.8/32 - 200.122.164.0/24

  3 172.31.250.8/32 - 200.122.164.165/32

  What is the reason for this?

  The reason why I have paste this above is because the control point defines the traffic "interesting" as two rules (one in each direction).

  Control point:

  Rule 1: The traffic of 200.122.164.165/32 172.31.250.0/28

  Rule 2: The traffic of 172.31.250.0/28 200.122.164.165/32

  So, I think that the problem occurs because we hear by the SAs of the phase 2 bidirectional rules (crypto ACL), and control point sets the SAs of the phase 2 as one-way rules. Even if traffic matches, I see the output above.

  I think this means that the ASA receives a portion of the traffic in a SA and send it via another, and I don't know if that is causing the problem and if so, how to fix?

  The problem is totally random. We have reduced the time to generate a new key for 2 minutes at the minute of the phase 2 and 5 on the phase 1 and there is no problem during the generate a new key.

  We had not been able to capture the log at the exact moment of the problem. Then the tunnel suddenly rises again and start working.

  ASA 5510 version 8.2 (5)

  Any help is appreciated!

  Federico.

  Federico,

  New installation SAs is not so to generate a new key, it consicides with a homologous assuming it matches traffic again and must so initial has ITS new.

  Now when we have a static, selector of this SA traffic encryption card new must match what we defined in the ACL.

  Generally, you will get an error if there is absolutely no match and tunnel would fail to phase 2.

  I want to just make sure we're on the same page. When it ends on a dynamic encryption card, we know (or rarely know) what will look like the SA distance so we accept everything.

  I do not say that this checkpoint of the half was here half it matched. I say it's more likely (for some reason I couldn't be aware, or a bug) implemented match the ACL under static crypto map.

  Marcin

• Network problem between the machines Win XP and Win 7

  I have 2 machines, a desktop and a laptop.  The office is currently running Windows 7 Pro (installed on 2010-01-01) and the laptop is running Win XP Pro.

  The desktop (Win 7) can see the laptop (XP) on the network and can access the shared folders.

  However, the reverse is not true.  The laptop can detect the office as a computer on the network.  I can double click the icon and see the files of office that are shared.  But when I try to access the content of the files, I get a message that says I don't have permissions and contact the system administrator.

  I also have a problem with the shared printer (connected to desktop Win 7).  Before the upgrade both machines can print, after the upgrade, the laptop (Win XP) stopped printing.  I installed the XP drivers for the printer (using the functionality of additional drivers) on Win 7, deleted the printer on the XP computer connection and he still added.  The XP machine was able to find the printer on the network, but when I try to print, I get an arror message saying that "(l'imprimante peut être désactivé, pas branché ou les pilotes ne sont pas installés)."

  I think that the two problems are related, but I can't understand where is the problem.  Print and file sharing is 'on' on both computers, the firewall is configured to allow printing the file and shares, folders are set to 'share', with "everyone" under permissions and both machines have the same network name.

  Any ideas? Am I missing something?  Is it possible to reset all default values so I can set up the network again from scratch?

  Thanks in advance a lot.

  Probably, you have a misconfigured firewall and/or do not have matching accounts/passwords user on both machines.
  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  XP - set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response. MS - MVP - Elephant Boy computers - don't panic!

• Limit the number of calls between areas of VCS/subareas?

  Hello

  I wonder if there is a way that we can limit the number of calls between two subareas, areas or VCS.

  The script as below:

  VCS-E (owncompany) < -----neighbor/traversal/dns="" zone="" over="" internet------=""> > VCS-E (partner)

  My intention is to limit to 5 video calls from VCS-E (partner) so that the 6th call (dial in endpoint) will be blocked.

  I know that we can control the total bandwidth between areas using links & pipes but that does not stop the remote end to lower their rate of recall and deal with several endpoints.

  Thank you.

  Hi Hafiz,

  have you tried to disable the 'downspeed by mode of appeal"in a configuration of Bandwidth?

  try disabling the "downspeed" by call OFF mode under VCS config-. > bandwidth--> configuration.

  This will not allow the calls get the downspeed but it must block because of insufficient bandwidth.

  Thank you

  Alok

• Problems between 2 - a Site, two ASA

  Hello

  I have big problems to configure the site to site tunnel between ASA (ASA5510 STI second ASA5505)

  After 8 hours of work I have no results

  show cryto say anything, here my config file I hope that everything could help me

  Kind regards

  Alen

  No need to have the IKEv2 configuration on the Group of the tunnel you use v1.

  Now,.

  Follow these steps:

  On FW GR

  fixup protocol icmp

  Then make 2 tracers of packages and provide me with all of the output of the second is

  Packet-trace entry within the icmp 10.43.81.10 8 010.43.11.15

  entry Packet-trace within the icmp 10.43.81.10 8 10.43.11.15 0

  On FW LIFE

  fixup protocol icmp

  Then make 2 tracers of packages and provide me with all of the output of the second is

  entry Packet-trace within the icmp 10.43.11.15 8 10.43.81.10 0

  entry Packet-trace within the icmp 10.43.11.15 8 10.43.81.10 0

  Note all useful posts!

  Kind regards

  Jcarvaja

  Follow me on http://laguiadelnetworking.com