Problem connecting to the new HR database

Similar Questions

• Problem connecting to the new router

  When we all first our WVC54GC Setup was quick and easy, and we used it without event for 1-2 years. Now, we have replaced our old router with a WRT610N. Everything else, wired and wireless, connected to the new network without event after I have updated their SSID settings and security. (A new uses WPA - WP2, the an old WEP) but for this camera I can not to do. I read the articles on this page and plugged all the correct settings, but it still won't talk of it in wireless mode. (With a cable that is no problem). What I'm missing here?

  You must be identical on both devices wireless settings to establish communication between your router and the camera... Ensure that your camera settings Wireless 2.4 GHz of your router... Try Basic WEP security and see if that works, if WEP works you can change security to WPA... Once you have set matching the wireless settings, unplug the cable ethernet and power cycle the two devices and see if you can see your wireless camera...

• Problem connecting to the new remote server

  We recently spent hosting companies and I am unable to connect to the new server.

  Work in Dreamweaver CS5, Mac OS X

  Here are the steps I took:

  -Under 'sites', went to "manage sites", clicked on the current site and press "Edit".

  -Click on "servers", then + to add a new server. Entered all my info in the "Site settings" window

  -When I click on 'test', I get an error message:

  "an FTP error occurred - cannot establish a connection to the host." No response from the server... »

  Any suggestions? Am I missing a step somewhere?

  Thanks in advance for your help

  Try to go to ftp.yourdomainname.com and see if you by entering your username and password allows through a browser.

  If it isn't, your host has really messed up something.

  Or I guess if the change happened fairly recently, DNS cannot have been activated yet and you could always essentially try to log the old servers.

• Problems connecting to the database msaccess 32 bit on 64 bit 11G

  Here's the question:

  I have a database to 9i (32-bit windows) with a connection hsodbc to an old one to an Access database so once the schema can see and copy data from an access database has said, everything works fine.

  I'm about to move the 64 bit 11.2.0.3 on windows 2008 server 64-bit database, database is migrated and tested ok.

  The problem comes from the connection dg4odbc, I created the AS400 database connections and they are ok, but I set up an ODBC for the access database, using the 32-bit ODBC interface as MS recommends, but I always get this error message:

  ERROR on line 1:

  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:

  [Microsoft] [ODBC driver manager] The specified DSN contains an architecture

  incompatibility between the driver and the Application {IM014}

  ORA-02063: preceding 2 lines of RADERDB

  According to MS technet, it is do not use the c:\Windows\SysWOW64\odbcad32.exe to set up the ODBC connection, but I used only executable, when I use the ordinary 64-bit ODBC admin I can't even see msaccess drivers first.

  The funny thing is, when I point the tnsnames.ora on the old server 9i entry, it uses the ODBC connection and then the dblink 11G and then works fine. However, it is a band-aid solution and I want to get everything works from the new production database server.

  Any suggestions?

  Thanks in advance...

  The message means you are using a 32-bit with a 64-bit program ODBC driver. It does not work. If you want to connect with the 64-bit DG4ODBC, you must use a 64-bit ODBC driver. A package is available on the Microsoft Technet site (AccessDatabaseEngine_x64 - http://www.microsoft.com/en-gb/download/details.aspx?id=13255 ) that ships the drivers ODBC 64-bit for their Excel/Access programs.

  Please note that product installation gateway 32-bit on Windows 64-bit is NOT supported.

  -Klaus

• OfficeJet 6600 e-all-in-one: Wireless connectivity with the new router problem

  We had the printer since 12 months, workin with no problems.

  Just got a new modem/router (NETGEAR V7610) installed as part of the NBN implementation and I can't get the printer to connect to the new router. 5 and 2.4 G active networks. The two defined newtorks on security WPA2-PSK [AES].

  The printer detects the wireless (2. 4 g) network, but can't coplete the connection. Tried the two direct input the network key and using WMA.

  -The display panel shows "wireless invalid password (WPA) is entered.

  -The results of network printer test page indicates a FAILURE on safety.

  I was able to connect to multiple other devices (laptop, iphone, Kindle...) without any problem. Used the two direct entry of the key network and WMA.

  Anything else I can try?

  Find a new update of the firmware for the printer (May 9, 2016).

  After you apply the update, the printer is able to connect to the new modem.

• Problem connecting to the server after moving

  Hi, I keep getting the message "there is a problem connecting to the server"192.168.0.19"etc. This happened after I moved. New ISP, new router. I have an Airport Express and a NAS connected to it. Time Machine and Icloud on the NAS. I think that the NAS has this IP address before moving. There are now 192.168.10.176. Everything works, but I get the pop up frequently.

  I look at the accounts and start but nothing. I reboot safe mode does not remove the problem. So, what can I do?

  I'm on Yosemite with MBR.

  Can you connect using the new IP address?

• Cannot install: problems connecting to the server

  I have a problem when installing the new version of Skype, whenever I have install and starts to say there is a problem to connect to the server, download Skype alternative, and when I do it here it again when I install, can someone help me with this problem of server?

  What Setup you're trying to open?

  The only what you have to do is copy the Skype.exe and Login.cab files and paste these files the installation of Skype folder or even any new folder on your computer.

  If you extracted all the files from the SkypeSetup_6.18.0.106.msi file, then you should be able to find the Skype.exe and Login.cab files in:

  \SourceDir\Program Files\Skype\Phone\

  

  

• Server connection error:-1 there is a problem connecting to the server... hp photosmart 5510

  HP photosmart 5510 e - while a printer B111a

  Windows vista 32-bit

  connection error message-Server error:-1 there was a problem connecting to the server, press Retry or ok to continue

  No changes have been made to my operating system

  Try to add new applications with eprint center of my Compaq Presario CQ60 laptop to my HP printer. Computer tells me that the new applications are there and ready to use, but printer says 'server connection error "? I followed all the instructions to connect to the wireless router, but I'm not sure how to connect to the "Server"?

  The steps below a usually resolve the problem you are experiencing:

  1. unplug the power cord at the back of the printer.

  2. unplug the power cord at the back of your router (and the modem, if they are separated from the router).

  3. wait 20 seconds, then plug the router (and the modem, if necessary) in.

  4. wait for 30 seconds, then plug the printer back and power.

  5. press the button on the front of the printer ePrint, and it should try to connect to Web Services again.

  These steps usually fix the problem, but if it persists, you can try definition of network information static for the printer (which is sometimes useful to stabilize the ability of the printer to get outside of your network to the internet):

  1. tap the wireless at the top of the screen of the printer and note the IP address.
   
  2. Enter the IP address in the address bar of a web browser on a computer and press on enter or click the go button browser.
   
  3. the printer status page must be open.  Click network in the upper part.
   
  4. click on networking on the left.
   
  5. Select the Proxy settings.
  Note: If you are prompted for a redirect, click OK.  If you receive a certificate warning, select the option that allows you to continue anyway.
  If you receive an internal system error, refresh the page until it loads the proxy settings.
   
  6. check that all fields are empty.  If they are not, make them disappear and make sure that the Proxy Server requires authentication is unchecked and click on apply.  You should get a success message.
   
  7. click on the network address (IP) on the left.
  Note: If you only configuring IP address and DNS address with a yellow note Configuration, refresh the page until it loads completely.
   
  8. leave automatic IP IP address Configuration.
   
  9 change the DNS address to the manual DNS Server Configuration.
   
  10. enter manual for the manual preferred DNS Server 8.8.8.8 and 8.8.4.4 for auxiliary DNS.
   
  11. click Apply and you should get a success message.
   
  12. turn off the printer for 30 seconds and then turn it on again to force the new settings take effect.

  Let me know if you have any additional questions. Thank you!

• WRT54G v.5 will remain not connected to the new laptop / Windows 7 Premium

  WRT54G v.5 will remain not connected to the new laptop / Windows 7 Premium. It works continuously with a cycle detection, connection, loss of connection; detection, connection, loss of connection, etc... The router works through this cycle, basically acting as if I disconnected and then reconnected to the power to reset, it disrupts my Internet connection to my Wired iMac and wireless, another office to the floor. Paid for Linksys support today and through remote access, he put up a new network on my desktop (iMac). After finishing, the problem still exists. When I told him that the problem had not been corrected, he said just wait an hour or two and it should work itself. She, of course, did not himself. Any ideas out there?

  Nevermind - I seem to have solved the problem with a simple firmware. Funny how the Linksys technician support don't think to ask what version of the router I have or suggest that I should try to upgrade firmware first. However, he is quite good at trying to upsell me for a new router instead of trying to help me solve the problem I had. It makes me want to go buy Netgear next time, thanks a lot!

• Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network.

  Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network! What I'm missing here? I'm sure it's maybe something simple, but for the life of me! (When my brother-in-law used this computer, he only uses it through dialup (!), he lives in a remote area). With the help of Vista, and when 'Management of connections' I see my network...

  original title: cannot connect wireless

  Hello

  ·         You get the error message?

  Method 1:

  I suggest you update the drivers for hardware connected to your computer on the Web site of the manufacturer check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Also, follow the steps in troubleshooting section and check if that helps:

  In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Check out these links and check if that helps

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  See also:

  Solve problems with computers not appearing is not in the network map

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map

  Hope this helps

• My PC (Windows 7), will automatically connect to the new networks unknown wireless is in the range. I want to stop it.

  I found a variety of positions that describe how to disable the "connect automatically" option for a specific network you connected to in the past (via 'manage wireless networks), for example:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-to-disable-auto-wireless-connect-in-Windows-7/52d33896-F356-4F9F-8390-79a686900cab
  http://checit.SCU.edu.au/index.php/FAQ/387
  They do not resolve my problem because my computer connects automatically on * new, unknown * networks that I've never connected to the front (and also, even after it connects to these networks, they do not appear in the list under 'Manage wireless networks').
  Apparently, it set to the default behavior to automatically connect to the new network he meets, and I need that to turn off. Thank you.
   

  Hi Michael,

  I suggest you to perform the steps mentioned by "Steve Winograd replied on November 6, 2009"of a similar discussion.

  Wi-wired connections on the same computer, Windows 7.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/wired-and-wireless-connections-on-the-same-Windows/ee40d9a6-297b-46D4-b5c8-db57d927b62e

  If the problem persists, I suggest to uninstall and reinstall the wireless card to reset all wireless connections.

  Hope this information helps. Response with status so that we can help you.

• T400: Error Message - there was a problem connecting to the TPM secure

  Hello

  I am a new user of ThinkPad. I just got my T400 a week ago, and I'm a fan of him immediately. But there's this little thing that really bothers me. The second day I used my laptop, I got this error message: "There was a problem connecting to the module of TPM (safety device) on this computer", and I got this message since that date, every time I turn on my laptop.  What it means? And how do I get rid of this error message? Thank you!

  Moderator Note: Type + error message added to the line object for clarity.

  go into the bios and check if the TPM secure is enabled or disabled in the BIOS. Make sure it's on. If the problem persists then call Lenovo, could be a hardware problem.

• I have a problem connecting to the internet. A windows security message appears requesting a user name and password.

  network/security problem

  I have a problem connecting to the internet. A windows security message appears requesting a user name and password. I spoke with my internet provider and they say it's problems with windows. Administering the computer was an old laptop that isn't in use anymore so I can't change the admin settings. Is that what you can offer and do you need more information about me?

  How you connect to the internet, dsl / comcast / wireless.

  The installation disk of your ISP to the main computer, then put it to the top with a modem what ever, after that you can reload the disc of routers and probably have to reset the default password,

  Once you get the configuration of your Internet service provider again then your router again you can re - enter the wireless or wired computers to the new network,

• Using Reporting SERVICES report server cannot open a connection to the report server database in SQL server 2008 R2 sp1

  Hello

  I'm running Reporting SERVICES Version 2007.0100.1600.022 ((SQL_PreRelease). 080709-1414 in Visual Studio 2008 with Microsoft SQL Server 2008 R2 Express Edition with Advanced Services (64-bit) on Windows NT 6.1 SP1.)
  Everything seems to work fine except that I can't deploy: "the report server cannot open a connection to the report server database."
  Connection test ReportServer as OK in the Configuration service report manager and Visual Studio. Run reports in Visual Studio against ReportServer and my other databases.  Deployment fails on a report of VM. Remote access is enabled in the firewall, pipes is enabled in configuration Manager SQL server, the permissions for all access in Windows.
  The error in the log file of report Service:
  Library! WindowsService_1! 12ac! 09/23/2012-21: 05:12: e ERROR: ServiceStartThread: Exception caught during the startup of service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: the report server cannot open a connection to the report server database. A connection to the database is required for all applications and treatment. ---> System.Data.SqlClient.SqlException: a network-related or instance-specific error all by establishing a connection to SQL Server. The server is not found or inaccessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - error Search Server/Instance specified)
  Any ideas?
  Thank you.
  -Phil

  Just, I solved the problem I had.

  It turns out, there, there were two questions... first concealing the second.

  SQL Web browser has not been activated.  solution: in properties SQL server configuration manager, transformed the startup to automatic mode and activated the service.

  Microsoft Visual Studio project property targetdatasourcefolder had a server name that precedes the name of the folder. Removed the name of the server.  This works.

  Everything unfolds right now.

• Problem connecting to the server, error connection server and printer offline. I have a HP photosmart printer and Windows 7?

  My printer is not printing. It say problem connecting to the server, connection error server and printer offline. I have a HP photosmart printer and windows 7.

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat