Problem creating RStudio ThinApp

Similar Questions

• Create a thinapp from an application that is installed from a CD

  We have a program at our school in which teachers use applications that fall into three categories: (1) installs completely from the CD and the CD is not necessary to run the application, (2) partially installs from the CD and the CD is needed to run the application, (3) does not install, but will completely from the CD.

  I tried to create a fine application of a CD in the first category, however he did take place as planned. On the virtual machine, it installed perfectly and worked as expected. After that I ran the Scan of mail, I have also included to create an MSI file, so I could use AD Group Policy to remove that. MSIDefaultInstallAllUsers = 1, MSIRequireElevatedPrivileges =-MSIStreaming = 1. I had to add Adobe Reader as a plugin, but the pdf that installs the CD didn't come to the course, it should appear in the Start Menu with two other elements that do not appear correctly. In addition, there is a feature that opens in Internet Explorer, and the title bar appears to be in Japanese or some Asian languages, but which does not appear on the direct installation.

  Really, I prefer not having to install these CDs on each of the laptops to teachers individually, but I can't find a way to make it work. Is it possible to create a thinapps in this situation? Thank you.

  By the sound of it, the application is able to be virtualized. You have some weird minor issues that looks like me, it could be solved with a little tweaking of project. The problem is that it won't be easy or possible to support you remotely using this forum.

  I would recommend that you contact VMware technical support and get help in this way.

  A note aside, do you know VMware virtualizes the CDROM. Might be of interest in the case.

• 12.4.3.1 update volume problems created?

  12.4.3.1 update volume problems created?

  Hello

  I had no problem with the Volume in the latest version of iTunes. Can you give more details about the problem you are having?

  Jim

• Problem creating ad hoc network-error: Windows could not set up the network.

  Original title: problem creating ad hoc network

  Hello dear,

  When I tried to set up an adhoc network and after entering the name and password of the network. Following up error message pop (Windows could not set up the network).

  I use windows 7.

  P.S. before I used to create the ad hoc network with no problems. But now no more.

  Kind regards

  Ana Paula Yousef

  Hello

   
  Did you change in the computer before this problem?
   
  I suggest to go through these steps and check.
   
  Method 1:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 2:
  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to " http://support.microsoft.com/kb/946481 ".
   
  You can also check:
   
  Set up a computer-to-computer (ad hoc) network.

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad-hoc networking.

  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

• There was a problem creating the destination folder. If please check the permission of folder or choose a different folder.   What that means, tried to name several different folders, but still the same error message. Would be grateful for the help!

  There was a problem creating the destination folder. If please check the permission of folder or choose a different folder.   What that means, tried to name several different folders, but still the same error message. Would be grateful for the help!

  This means that the folder you want to create is blocked because of file permissions. The drive or folder you are trying to create the destination folder is set to read-only, and your username does not have write permissions.

• Problem creating the destination for Lightroom 6 folder

  Just upgraded to Lightroon 6. Now I have a problem creating the destination folder. Already checked the folder permissions. Even tried a new folder nothing helps. A lot of space on the computer.

  Don't know who to turn to next. Is this a problem of individual computer?

  You must use a computer with permissions of administrator account

  Also, do a right click on the installer and select RUN AS ADMINISTRATOR from the popup option window to see if that helps

• VM snapshots allows you to created a ThinApp Package?

  I have a request I want to create a ThinApp Package for.  My application requires also some prerequisite applications to install that I also want to include in the package ThinApp.

  Currently my process to build the ThinApp package is as follows:

  1 revert/Go To installed a virtual machine 'clean' with VMware ThinApp

  2. perform a scan with ThinApp

  3. install applications prerequisite of my application

  4 install my application

  5 perform a postscan with ThinApp

  6 building the package ThinApp including my application and its required applications

  I have a preview of my 'clean' VM that was created using VMware Workstation so that I can return to my 'clean' machine whenever I want to build a new package ThinApp, however I'd like to be able to use a snapshot of my VM that includes only the application prerequisite so that I don't have to reinstall them whenever I create a new package ThinApp for my application.

  My ideal process would be as follows:

  1 revert/Go To installed a virtual machine 'clean' with VMware ThinApp

  2. perform a scan with ThinApp

  3 snapshot go to a VM to a virtual computer with the prerequisite applications installed

  4 install my application

  5 perform a postscan with ThinApp

  6 building the package ThinApp including my application and its required applications

  Essentially for step 3 above, I want to be able to go to a snapshot of my VM has already some prequiste applications instead of having to install physically each time.

  Anyway is to maintain the process of configuration ThinApp Capture while jumping to different snapshots of a virtual computer?

  Any advice or suggestions on how to do this would be greatly appreciated.

  Thank you.

  I would do the following:

  1. Go to a clean snapshot
  2. Thinapp to start and perform a prescan
  3. Install your applications pre - req
  4. Snapshot at this moment (in memory) and name your application

  With this, you can go back to the snapshot in step 4 and install your application each time, then do a postscan, etc..

• Problem creating hierarchy based on 2 physical dimension tables

  I'm having a problem create 1 dimension logic with a hierarchy of exploration, based on two separate physical dimension tables. The errors I get when navigating in the exploring hierarchy is:
  "Cannot find coverage source logical table to the columns of the logical" &
  "Missing join between the logical tables.
  
  I use OBIEE 10.1.3.4
  Here are the details of what I have set up as:
  
  Physical layer:
  Table DIM_ORG with the dimension columns:
  -dimension_key
  -org_total_code
  -org_total_description
  -org_detail_code
  -org_detail_description
  
  Dimension table DIM_DEPT with columns:
  -dimension_key
  -dept_total_code
  -dept_total_description
  -dept_detail_code
  -dept_detail_description
  
  FACT_SALES table with columns of facts:
  -fk_org
  -fk_dept
  -sum_sales
  
  Physical joins:
  FACT_SALES.fk_org = DIM_ORG_dimension_key
  FACT_SALES.fl_dept = DIM_DEPT.dimension_key
  
  Business model and the mapping of layer:
  I created a logical dimension ORG_DEPT. It contains two sources of logic table (DIM_ORG & DIM_DEPT) and the following logical columns:
  -All departments (mapped to dept_total_code)
  -Organization (mapped to org_detail_description)
  -Organisation number (mapped to org_detail_code)
  -Department (mapped to dept_detail_description)
  -Department Code (mapped to dept_detail_code)
  The logical key of the company is based on the combination of number of organization & Department Code
  
  The hierarchy, I need is: all departments-> organization-> Department so I created the following hierarchy for ORG_DEPT:
  -Total level containing: all departments
  -Organization level containing: company (defined as logical level key) number & Organisation (als defined the key level drill)
  / Department detail level containing: Department (defined as logical level key) Code and the Department (defined as key level drill).
  
  In the LTS of the ORG_DEPT dimension, I've set levels of content for sources:
  DIM_ORG: Level of organization
  DIM_DEPT: Level of detail Department
  The LTS non - joins inner - came against the associated physical tables.
  
  I created a logical fact table (based on the physical fact table) SALES and joined him on the ORG_DEPT logical dimension table.
  In the LTS, level of content for ORG_DEPT is part of the level of retail service. Non - joins inner were aded against related physical tables.
  
  When I create a report in response to test the hierarchy and select only "all departments' I get the value of the returned correct size. When I try to break through to the next level, I get the following ODBC error:
  "Could not find coverage source logical table for logical columns: [all of them]." "Please check more detailed level keys are correctly mapped.
  
  When I create a report in responses and select "Every department" and "Sales", I get the correct result. When I try to break through to the next level, I get a different ODBC error:
  "Lack of join between the logical tables DIM_DEPT and DIM_DEPT: there must be at least a physical link to join between the underlying physical tables.
  
  All suggestions are welcome!
  
  Thank you!

  You have no relationship defined between the Department and org.

  You can either:
  a. create a table of physical dimension with a composite key of org_id & dept_id if there is a relationship defined somewhere, then to obiee model as you have already done, but in the physical layer on the composite key join
  b. model your exisitng as two-dimensional and two hierarchies tables and set up a path of forest favorite between them according to your needs.

  Kind regards

  Robert

• Problems creating a DB on ASM 11.2.0.1 10.2.0.4/11.1.0.7

  Hello
  
  I have some problems creating a DB 10.2.0.4/11.1.0.7 on top of ASM 11.2.0.1 using dbca. I can't get past step 7 when I select the DSO as a storage device.
  
  Here are the steps I did:
  
  -Install a 2 11.2.0.1 with ASM and Clusterware node RAC cluster, it worked well.
  -Set the 'Compatibility DB' 10.1.0.0.0 on in ASM disk groups.
  -Installed and configured a 11.2.0.1 database on this cluster, this has worked.
  -Installed software DB at separate Oracle 10.2.0.1.
  -Updated installation of 10.2 to 10.2.0.4.
  -Installed software DB at separate Oracle 11.1.0.6.
  -Updated installation of 11.1 to 11.1.0.7.
  
  Now, when I run dbca (it produced both of the O_H 10.2 and 11.1) in step 7 in the wizard I select "Select ASM as storage" and then when I press Next, I get this error message:
  
  "DBCA couldn't start the ASM instance is configured on this node. To proceed with the creation of the database using ASM, you need the ASM instance to be operational. You want to re-create the ASM instance on that node? "
  
  In the dbca log file I see "ASM present but is not activated, user mark..."
  
  What should I do to be able to create a DB 10.2 on 11.2 ASM? I also tried to put TNS_ADMIN to the directory of network/admin under the grid infrastructure, however, this does not work eitther, I still get the same problem.
  
  Any ideas what are the measures that I have to do in order to create a 10.2 / 11.1 DB on top of 11.2 Grid Infrastructure?
  
  Thank you

  It seems that the problem is related to the following bug:

  Bug.8288940 (74) TB - CMP 11106 DBCA TRY TO START 11.2 ASM WHICH IS ALREADY in PLACE AND REPORT FAILURE

  After applying the hotfix 8288940 at home 10 g DB, the creation of data base RAC succeeded.

  Hope this helps,

  Lisa Vance

• Install the .msi file created by ThinApp: still can't find Win32Data.qtr

  I created Workstation on my PC Windows 7 Ultimate 64-bit host, and installed a clean machine of the virtual Windows XP 32 - bit with workstation. I installed Starry CSAP at night on the virtual XP machine, and it works fine. I used Capture of ThinApp configuration to create an image of msi with 1.5 GB of dat file, using Mode of insulation of the write small and ' same directory as the application (drive carrier / portable USB) "for the location of the Sandbox. I copied the result C:\Program VMware ThinApp\Capture\Starry night CSAP (5)------folder on my Windows 7 host computer, installed the VMware of Starry CSAP at night by double clicking on the icon of msi. When I ran the result by double clicking on the icon of the CSAP of starry night over the Windows 7 Desktop, the original error "can't locate the Win32Data.qtr. Pls reinstall"to try to install and run Starry CSAP at night on the PC Windows 7 without VMware, reappears. I also tried the user profile to the location of the sandbox and the isolation of writing full mode, both without success.

  Pourrait an expeienced software designer who had the same problems please share their knowledge in solving this problem?

  Thank you very much

  BenCh1424

  Can you, please, check is file Win32Data.qtr exists on your Windows 7 64 windows b?

  Can you please check the location of the Win32Data.qtr file on your system Windows XP 32 b and on Windows 7 64 b?

  Can you, please, check if file Win32Data.qtr is located in the directory of your app to thinapped project. And if so, I would like to know the location in the project directory.

  If you know the location on your system of 32 b of Windows you can run virtualized cmd.exe (virtualized during the application of the thinapping) and try to look in the virtual file system if the file exist in it.

  I think that your software has problem find the file because of the platform 64 b (Program Files and Program Files (x 86)). But when you thinapp Quick Time with your app, it shouldn't be a problem.

  Please, answer me these questions and we'll see.

• Problem creating an event in Final cut Pro

  Hello

  I am running Final Cut Pro 10.2.3.

  I created a new library, but when I imported my videos, then in a folder called "smart Collections".

  This folder has never appeared before.

  When I tried to create a new event, the clips remained in smart Collections folder.

  I couldn't tell the program to duplicate clips in the new event.

  What is going on?

  I deleted the new library and started again.

  I deleted the new library, restart Final Cut Pro.

  The problem persisted.

  Help, please.

  Guy

  When you create a library, an event is created as well as smart collections featured med goes into the event and can also go in smart collections. You can't have a library without an event which takes place in the media. Maybe you can post a screenshot of what appears in your browser.

• (BUG) Problem creating events of the calendar in the past (IOS 9.3.1)

  Recently, I get such a problem:

  1. I opened a last date in the calendar default ios

  2. create an event:

  -put the name of the event 'Accident '.

  -day 17 April 2016

  -start time 16:00 (end time 17:00)

  -all other attributes - default:

  calendar by default (have also 1 calendar personalized in a list)

  No rehearsal, no trigger time, no participating, call back in 30 minutes

  * a tried also the attributes of different event with the same effect. Didn't help not also choose my google calendar. tried several times)

  3. Press 'Add '.

  wait: event created, appears on that date and remains

  get: event appears and disappears in about 1 second

  What could be? Can help you with this? What IOS Bug?

  Creation of future events - no problem

  Settings - Mail, Contacts - synchronization scroll to calendars - events - How back does go - you may need to reset it to take account of the date that you set the old event from

• Problem creating recover DVD - Equium L350

  Please help, I just bought a L350 laptop and cannot create a recovery DVD.
  The writing of the DVD begins, and after 10-15 minutes the fails and I get the following message:

  The following question ccured while recoding data on the disk. A power calibration area error.
  Please, check if the disc is scratched or dirty, if so, please try again with a new disc. (error code: 0e01b5-26-00037304)

  Hello

  You get the power calibration error?
  Well, this error appears if the disk s lens may not calibrate properly in place.
  Above all, it occurs due to a mechanical problem s drive and in most cases, the CD/DVD drive must be replaced.

  On the other hand, the goal could not calibrate correctly using not compatible and not support CDs or DVDs.

  Have you tried burning different media from different manufacturers?
  If this is not the case, try this!

  Good luck

• Problem creating an account of HP Web Services

  Hi, I just brought a 4500 desire.  All the installation program has been very well and I can print and scan wireless so I'm sure the printer works.  I also activated the Web service and received a paper copy of the printer that lists the steps and the printer code.

  However, when I tried to create a new account on behalf of HP Web Services, after I entered all the required information, it still not let me go through and said "Email must match to ' and ' match of motorization of passwords '.»  So for the moment I'm not able to use eprint.

  I appreciate if anyone can help?

  I read another post with the same problem after I sent my.  I think that my problem was that IE and Chrome do not display the field "confirm your password" so that I can do it using Firefox.  If the account is created.

  Anyway, it is now resolved and thanks for your quick response.

  Thank you!

• Problem creating drive recovery for Satellite L550-10N

  Hello.

  I just bought a L550-10N and the first thing I tried to do is to create recovery discs using the Toshiba recovery disc creator.

  Everything went well on the first creation of disc (4 must be created).
  The problem starts with the second disk: about when it's half burned, decisions of the gauge, the DVD drive continues to function for hours and never stops.

  I tried the process again, but it was exactly the same.

  Anyone an idea how to solve this problem?

  Thank you!

  According to my experience, the best thing you can do is to create a recovery media using DVD-R virgins.
  I have created for several different models of laptops using TDK or Verbatim DVD-R media, and every time everything was fine.