12.4.3.1 update volume problems created?

Similar Questions

• Updates to Documents created by model

  I noticed something I thought was strange and need to check if this is normal. I created a Web site by using a template. As I began to make pages based on the template, I noticed category missing spry and went back into my template to add. When I saved the file, dreamweaver went to update all my files based on the template. Once completed, all the pages that I had opened have been updated with the new category.

  There was however 1 page I did not open at the time of the update that was the index.html file. When I went to open it and try to update the file via this method:

  Modify > templates > update current Page, nothing has changed. I refreshed my index page in the hope that the update went thru, but nothing had changed. I then opened my page index.html, made a dummy change to my model and updated and got the update. I then removed the dummy and put change to update again and took this update.

  It seems that if pages updates are not open when I put through the model updates, the pages created with the template do not put properly updated. Is this normal? I'm doing something wrong?

  Thanks for your help.

  It seems that if pages updates are not open when I put through the model updates, the pages created with the template do not put properly updated. Is this normal?

  N ° model applied correctly updated (i.e., changes to the non-editable regions) will be spread to all pages of the child that the child pages are open or not.  If you don't see it happen, and then you make changes to the editable regions or there is a problem in your site.  Are you sure that the page was not updated is actually a child of this model?

• Problems creating a DB on ASM 11.2.0.1 10.2.0.4/11.1.0.7

  Hello
  
  I have some problems creating a DB 10.2.0.4/11.1.0.7 on top of ASM 11.2.0.1 using dbca. I can't get past step 7 when I select the DSO as a storage device.
  
  Here are the steps I did:
  
  -Install a 2 11.2.0.1 with ASM and Clusterware node RAC cluster, it worked well.
  -Set the 'Compatibility DB' 10.1.0.0.0 on in ASM disk groups.
  -Installed and configured a 11.2.0.1 database on this cluster, this has worked.
  -Installed software DB at separate Oracle 10.2.0.1.
  -Updated installation of 10.2 to 10.2.0.4.
  -Installed software DB at separate Oracle 11.1.0.6.
  -Updated installation of 11.1 to 11.1.0.7.
  
  Now, when I run dbca (it produced both of the O_H 10.2 and 11.1) in step 7 in the wizard I select "Select ASM as storage" and then when I press Next, I get this error message:
  
  "DBCA couldn't start the ASM instance is configured on this node. To proceed with the creation of the database using ASM, you need the ASM instance to be operational. You want to re-create the ASM instance on that node? "
  
  In the dbca log file I see "ASM present but is not activated, user mark..."
  
  What should I do to be able to create a DB 10.2 on 11.2 ASM? I also tried to put TNS_ADMIN to the directory of network/admin under the grid infrastructure, however, this does not work eitther, I still get the same problem.
  
  Any ideas what are the measures that I have to do in order to create a 10.2 / 11.1 DB on top of 11.2 Grid Infrastructure?
  
  Thank you

  It seems that the problem is related to the following bug:

  Bug.8288940 (74) TB - CMP 11106 DBCA TRY TO START 11.2 ASM WHICH IS ALREADY in PLACE AND REPORT FAILURE

  After applying the hotfix 8288940 at home 10 g DB, the creation of data base RAC succeeded.

  Hope this helps,

  Lisa Vance

• TB 31.5.0 Win 7 after the TAB key for the automatic update no longer creates new address line "write" (enter the done key) but I want the TAB key! Why this keep happening after

  TB 31.5.0 Win 7 after the TAB key for the automatic update no longer creates new address line "write" (enter the done key) but I want the TAB key! Why is - this seems to happen after each automatic update? Cant we get 'option' to use the TAB key to navigate through the lines of address "write"?

  TAB through the fields that exist. It is the function of the TAB.

  Otherwise you could never use TAB to go out in a field for example: subject. It would create an indefinate number of fields and are unable to function as a TAB key.

  TAB does not back to THE fields,
  New crests to THE fields or donkey typing/selection enter/return address, you can use the selection of mouse click.

• Update installation problem (error code: c8000210)

  original title: update installation problem

  Error C8000210

  Thanks for providing all relevant information to help us try to you.

  Suggestion:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• my windows vista computer is to download a lot of updates which will create the lack of disk space in my hard C drive? Please help...

  my windows vista computer is to download a lot of updates which will create the lack of disk space in my hard C drive? Please help...

  You already have disk cleanup?

  Please use this tutorial:
  http://www.Vistax64.com/tutorials/76073-disk-cleanup.html

  The Atlantic tutorial has 2 parts:
  Step 1 to 11 is for the classic disk cleanup which will give you back some disc FEPs.
  Step 12 until the end (more), is to delete all except the most recent restore points. This will give bring you a ton of disk space.
  ATTENTION: Make sure that your computer works OK because you delete restore points.
  You have no past point to fall up to restore more new restore points are created.

• Problem creating ad hoc network-error: Windows could not set up the network.

  Original title: problem creating ad hoc network

  Hello dear,

  When I tried to set up an adhoc network and after entering the name and password of the network. Following up error message pop (Windows could not set up the network).

  I use windows 7.

  P.S. before I used to create the ad hoc network with no problems. But now no more.

  Kind regards

  Ana Paula Yousef

  Hello

   
  Did you change in the computer before this problem?
   
  I suggest to go through these steps and check.
   
  Method 1:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 2:
  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to " http://support.microsoft.com/kb/946481 ".
   
  You can also check:
   
  Set up a computer-to-computer (ad hoc) network.

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad-hoc networking.

  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

• There was a problem creating the destination folder. If please check the permission of folder or choose a different folder.   What that means, tried to name several different folders, but still the same error message. Would be grateful for the help!

  There was a problem creating the destination folder. If please check the permission of folder or choose a different folder.   What that means, tried to name several different folders, but still the same error message. Would be grateful for the help!

  This means that the folder you want to create is blocked because of file permissions. The drive or folder you are trying to create the destination folder is set to read-only, and your username does not have write permissions.

• Update a problem during the installation!

  Update a problem during the installation!

  U44... Update error http://forums.adobe.com/thread/1289956 can help

  10.10.5 Mac has new problems, but I have no connection to this version

  Fix possible Mac 10.10.4 (at least for Premiere Pro) https://forums.adobe.com/thread/1891705

• Problem creating the destination for Lightroom 6 folder

  Just upgraded to Lightroon 6. Now I have a problem creating the destination folder. Already checked the folder permissions. Even tried a new folder nothing helps. A lot of space on the computer.

  Don't know who to turn to next. Is this a problem of individual computer?

  You must use a computer with permissions of administrator account

  Also, do a right click on the installer and select RUN AS ADMINISTRATOR from the popup option window to see if that helps

• Problem creating hierarchy based on 2 physical dimension tables

  I'm having a problem create 1 dimension logic with a hierarchy of exploration, based on two separate physical dimension tables. The errors I get when navigating in the exploring hierarchy is:
  "Cannot find coverage source logical table to the columns of the logical" &
  "Missing join between the logical tables.
  
  I use OBIEE 10.1.3.4
  Here are the details of what I have set up as:
  
  Physical layer:
  Table DIM_ORG with the dimension columns:
  -dimension_key
  -org_total_code
  -org_total_description
  -org_detail_code
  -org_detail_description
  
  Dimension table DIM_DEPT with columns:
  -dimension_key
  -dept_total_code
  -dept_total_description
  -dept_detail_code
  -dept_detail_description
  
  FACT_SALES table with columns of facts:
  -fk_org
  -fk_dept
  -sum_sales
  
  Physical joins:
  FACT_SALES.fk_org = DIM_ORG_dimension_key
  FACT_SALES.fl_dept = DIM_DEPT.dimension_key
  
  Business model and the mapping of layer:
  I created a logical dimension ORG_DEPT. It contains two sources of logic table (DIM_ORG & DIM_DEPT) and the following logical columns:
  -All departments (mapped to dept_total_code)
  -Organization (mapped to org_detail_description)
  -Organisation number (mapped to org_detail_code)
  -Department (mapped to dept_detail_description)
  -Department Code (mapped to dept_detail_code)
  The logical key of the company is based on the combination of number of organization & Department Code
  
  The hierarchy, I need is: all departments-> organization-> Department so I created the following hierarchy for ORG_DEPT:
  -Total level containing: all departments
  -Organization level containing: company (defined as logical level key) number & Organisation (als defined the key level drill)
  / Department detail level containing: Department (defined as logical level key) Code and the Department (defined as key level drill).
  
  In the LTS of the ORG_DEPT dimension, I've set levels of content for sources:
  DIM_ORG: Level of organization
  DIM_DEPT: Level of detail Department
  The LTS non - joins inner - came against the associated physical tables.
  
  I created a logical fact table (based on the physical fact table) SALES and joined him on the ORG_DEPT logical dimension table.
  In the LTS, level of content for ORG_DEPT is part of the level of retail service. Non - joins inner were aded against related physical tables.
  
  When I create a report in response to test the hierarchy and select only "all departments' I get the value of the returned correct size. When I try to break through to the next level, I get the following ODBC error:
  "Could not find coverage source logical table for logical columns: [all of them]." "Please check more detailed level keys are correctly mapped.
  
  When I create a report in responses and select "Every department" and "Sales", I get the correct result. When I try to break through to the next level, I get a different ODBC error:
  "Lack of join between the logical tables DIM_DEPT and DIM_DEPT: there must be at least a physical link to join between the underlying physical tables.
  
  All suggestions are welcome!
  
  Thank you!

  You have no relationship defined between the Department and org.

  You can either:
  a. create a table of physical dimension with a composite key of org_id & dept_id if there is a relationship defined somewhere, then to obiee model as you have already done, but in the physical layer on the composite key join
  b. model your exisitng as two-dimensional and two hierarchies tables and set up a path of forest favorite between them according to your needs.

  Kind regards

  Robert

• How do you get the beta version of windows 7 to solve the problem created when the auto update 0x0000c1f5 ran?

  How do you get the beta version of windows 7 to solve the problem of stop 0x0000c1f5 windows vista home edition created when the automatic update ran?

  Previous discussions about the error: ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Can't see the logical volume when creating data store - vSphere 4.1

  Hi guys, got another problem with ESXi 4.1 on a HP Proliant ML350 G6.

  ESXi 4.1 update 1 has been installed successfully on the server on an internal USB. Our next step is to create a store of data through the vSphere client.

  The server has five 500 GB SAS configured in a RAID 5 array drives. The server has a HP Smart Array P410i RAID controller. I see five physical disks and logical volume of about 2.3 TB in RAID Utility. However, when access us the hypervisor via the vSphere client and try to create a data via a storage LUN/local store, the display shows then no logical volumes or the drive bays on which to create a data store.

  We are usnure why this is, as the ESXi 4.1 installation program could see this logical volume when I was installing the hypervisor, but he does not appear in vSphere for use in a data store.

  If anyone can help?

  Thank you very much.

  Each disk must be less than 2 TB - 512b

• Problem creating bootable installation for El Capitan

  Hello

  When I try to create an installation program for El Capitan bootable on a new MacBook Pro (A1278) in November 2015 using the string SUDO included in

  HT201372: Create a bootable OS x Installer, I get an immediate failure with the answer "sudo: failed to initialize the PAM: no such file or directory." Diskmaker X loops on it and runs into the same answer of the problem.  Is there a solution or the solution to this problem?

  If you do not already have a current backup, please backup all data, and then reinstall the OS. * you don't need to erase the boot volume, and you won't need the backup unless something is wrong. If the system has been upgraded an earlier version of Mac OS X, you may need to the Apple ID and password to use.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  If you installed the runtime Java distributed by Apple, and still need, you will need to reinstall it. It goes the same for Xcode. All other data will be preserved.

  Related support article refers to OS X 10.11 ("El Capitan"), but the procedure is the same for OS X 10.7 ("Lion") and later versions.

• After February 10, Windows Update computer problems

  My Acer Aspire X 1200 has been paralyzed after an update on 10 February.

  After the update has been installed, my computer has freezes which lasted from 10 seconds to 2 minutes and sometimes I got that last 5 seconds that's happened every minute frozen. The sound is also taken in the loop. I had to make stops hard just to get my computer to cut. When my computer is started after the closure, it's super slow to start my applications (MSN, Xfire, PandoraOne and box). After that, the computer will not start Firefox or Internet Explorer. If a program starts, it is almost impossible to run due to the freeze. I already have 2 system restore to before the update, and my computer works very well. I also used AVG and cyber to scan my computer for viruses, they both came up empty, but Cyber has demonstrated a lot of registry errors. The only way I can even run my computer is through safe mode. Help, please!

  It's terrible to hear, Daruma: I'm sorry to see that you are in such a pass.  I am not particularly satisfied with the aggressive way, Microsoft pushed the security updates lately.  I understand the need for them, but in Windows 7, I'm more than a little annoyed how this February as a whole has been treated.  What can be so potentially crippling must be more carefully tested, and we certainly shouldn't we have our machines impose us a reboot.  I had more than one backup at night or rip or other lengthy process completely the bomb at the last minute because my machine decided it was time to restart the machine and am tired of wait on me to answer the pop-ups of nag.

  I have some information that can help you, but it is not enough.  At this point, you want to find the smartest geek you know and bribe him with pizza and Red Bull to repair your machines.  Show them this thread too...

  (1) you are right, that if you run a 64-bit OS and try to use a 32-bit installation disk to perform a recovery, you will encounter problems.  Under XP, it's even worse: the disks that are different flavors of Windows XP (such as "Windows XP Professional with Service Pack 1" and "Windows XP Professional with Service Pack 2") are also out of sync relative to each other, making the recovery of the wrong version sometimes impossible.  HOWEVER...

  (2) with Vista and 7, Microsoft has homogenized their drives: a drive for 7 Pro can also be used to recover/repair an installation of 7 Home or Ultimate.  I don't know if it's perfect, however: you may still be unable to use a 32 bit disc to get a 64-bit machine and vice versa (which I think is what you're saying).  THEN

  (3) you may have a hidden partition on your hard drive that contains your OS and original software.  It would be visible at startup time and therefore could be extracted and transformed into a bootable OS or momentum from a pre-loaded recovery utility.  Gateway and Toshiba have done this before.  AND

  (4) you may also be able to * buy * these discs Gateway system or Toshiba.  I had to do exactly this for gateway my aunt last year, paying about $30 for a system recovery disk.  My Toshiba comes with a utility that is supposed to create your discs for you by burning them to blank media, but it was absolute garbage, ripping coasters of almost a dozen and never get the last disk made.  I got a real BS answer on why the burning utility did not work... but I was told that I could buy the discs if I wanted to.   BUT

  (5) in the worst-case scenario, all is still not lost.  If for any reason, the hard drive is watered, your hired geek can put another HDD, install an OS on it, and then focus on your current hard drive and pull all the files out of what you want to use.  Or they can simply pull on your hard drive, put it in a working machine, back up everything that was on it, then put the HD in your machine and do a full format/reinstall.  From there on, you manually load all your files back on the new facility.  It's a pain, but it will almost get you back to where you were.

  Even if you have formatted your hard drive, some files can be recovered.  I used a utility called "Restorer2K" a couple of times and it was excellent traction deleted files do market back a formatted hard drive.  Just try to do it before the installation of a new facility on top of the empty car.  ALSO

  (6) there is a little more work, but not hard work... your geek-for-hire can also take a drive in Windows, download the software and drivers for your machine and 'mind meld' together to do a custom installation disc.  It is a GREAT free tool called "nLite" (for XP) or "vLite" (for Vista and I think that 7) who will do it.

  In the future, I know that this may seem like a pain, but you might want to grab a free backup utility called Macrium Reflect.  It can be programmed to perform backups of your machine on a regular basis and even store them somewhere else.  For example, you could tell the gateway to the top Thursday night in a big fat USB, plug the USB key Thursday night and leave the front door during the night.  Then say the Toshiba to save on Friday night on the USB, Plug and let the Toshiba on it during the night... you get the idea.  This way if this happens again, at least you have a way to back up things and never lose more of, say, evidence of a week of things.