Problem deploying Multi-VM. VAPP in vCAC vcloud

Similar Questions

• VAPP cloning without vCloud

  Hello

  We currently use the cloning of vApps on vCenter to wring an environment for our users when necessary.  Our current process is to use Powershell scripts called from a web service to clone a paralytic, but due to various problems with implementation, we are looking to move to Orchestrator.  I have looked around various resources on how to clone a VAPP using Orchestrator but just short.  There are a few items I found how to clone a paralytic, but everything is for all those who use vCloud Director.  I tried a Scriptable task to cloning by creating a new object VirtualApp defining any additional information to send in the clonevapp_task of coding, but I ran into issues trying to create the object VirtualApp.  Then, I tried to send in the VAPP object in the script task to ensure at least it works, but the clonevapp_task command is to launch a mistake because my VAppCloneSpec is not correctly identified.

  Can someone point me in the right direction in order to clone the VAPP?  Ideally, I would like to send a name of a paralytic to clone and the name of the new TIME and have the code/workflow do the rest.

  Thank you
  Dan

  Hello scrappy - I do not have the time nor resources that look entirely at the moment, but your task scriptable should resemble the following:

  // Initialize the VcVappCloneSpec and assign properties
  var vAppCloneSpec = new VcVAppCloneSpec();
  // vAppCloneSpec.host = targetHost; // online docs say this is not needed and resource pool will determine behavior: http://www.vmware.com/support/orchestrator/doc/vco_vsphere55_api/html/VcVAppCloneSpec.html
  vAppCloneSpec.location = targetDatastore; // Input: VC:Datastore
  vAppCloneSpec.vmFolder = targetVmFolder; //Input: VC:vmFolder
  vAppCloneSpec.provisioning = provisioningType; // one of the following strings: thin, thick, sameAsSource
  
  // Need to get source vApp networks so they may be mapped to destination vApp networks:
  var sourceNetworks = vApp.network;
  var networkMapping = new Array();
  
  // The following code needs to be rewritten to account for more/less networks:
  // Assumes the array "targetNetworks" has matching destination networks for each of the source networks
  for each (net in sourceNetworks){
      var networkMappingPair = new VcVAppCloneSpecNetworkMappingPair();
      networkMappingPair.source = net;
      networkMappingPair.destination = targetNetworks[0]; // Input: Array of VC:Network that matches up to the source networks by index - as noted above, this should be written to be more dynamic
      networkMapping.push(networkMappingPair);
  }
  // Now that the network mappings are ready, add property to clonespec:
  vAppCloneSpec.networkMapping = networkMapping;
  
  var task = vApp.cloneVApp_Task(newVAppName , targetPool , vAppCloneSpec);
  // Pass this task out to another workflow element that waits for the task to complete...
  

  Yet, I have not validated the code above, but looking at the objects in the API Explorer, this seems to be common sense. Pay attention to my comment lines in the above code, because it requires some adjustments.

• Problem creating provider vDC on the way vCloud 5.1 of the Evaluation Guide

  I'm folling the vCloud 5.1 Evaluation Guide.  Well, everything seems to be going, but when I try to create my first provider vDC, I have problems.  At the level of the vCD, I said just that operation exceeded all trying to install the agent on one of my two esx hosts.  Interestingly, it is the host on which I have installed the vShield Manager on.  When I dig down in the plain of vCenter, I see more specific complaints n the event logs for the hosts.

  Apparently, the host must be turned off (for the installation of the agent vCloud, I guess) and this requires a migration of DRS of the vShield Manager vm to my other host.  This migration will fail.  And here is the most relevant information of the event.

  DRS could not generate a recommendation of vMotion for a virtual machine on a host of passage in Maintenance Mode. This incident occurs usually because no other host in the cluster DRS is compatible with the virtual machine. Unless you migrate manually or turn off this virtual machine, the host will not be able to enter into Maintenance Mode.

  Sounds pretty accurate, but I have no idea what could cause problems of "compatibility" with the other guests.  As far as I know, they are the same.  I certainly meant them to be.  The store of data that the virtual machine is on is a store of data shared between two hosts, as far as I can tell.

  Troubleshooting tips would be appreciated.

  the ESXi host is not off... the host is put in maintenance mode.

  In an ideal world, you'd have vCenter/vShield in a different cluster your vCloud deployed VMs.

  To do this, you must ensure you DRS is in fully automatic mode, and vMotion actually works.

  Aside from that, if you create a provider vDC and prepare all hosts, they can all try mode of maintenance on their own.

  It is somewhat a clumsy scenario... Since you cannot move the virtual machines on a host of passage in maintenance mode.

  so, although if failed, if we lend... see if you can prepare the failed host... this time, it can work.

• Problem with Ogranisation Network internal/external in vCloud

  Hi all

  I'm trying to boot WindowXP VM inside HCLOrgvDC (Org vDC). But the start-up has failed with an error as below.

  -Cannot start VAPP "vApp_administrator_7."
  -Unable to start virtual machines in the pool of resources '2114618123-HCLOrgvDC '.
  -Unable to start Windows XP VM: could not locate a compatible host connected to any network.

  I just want to start it without external network connectivity. I created a pool of network with a direct connection (screenshot attached), but still VM is not booting.

  What could be the problem, please help

  Thank you

  TEJ

  Hello

  The error message could check you that all your hosts are correctly enabled in vCD?

  vCloud Admin-> management & monitoring-> vSphere resources-> hosts

  If this is not the case, make sure to enable each host, this allows you to use the ability to "spanning the host" for your network pools. (your underlying vSphere Cluster)

  Kind regards

• Problem of multi-turn encoder

  I was handed an encoder that hit around, and the memory is to integrate into a new benchmark of multi-turn. The problem is that it is only a unique feature of the tower.

  Has anyone written a reliable code snaps the tour on a single turn encoder account when the output roll over?

  The application is quite slow (24 RPM), the interface to the encoder's all works so I just have to manage the flow of number.

  Thanks in advance!

  Now solved!

• Problem creating Multi Cam

  I'm having a problem around the creation of a multi cam.  I don't know how to explain it so I'll do my best.  I have a created a multi cam clip.  I'm cutting into pieces for a sequence.  The first piece I cut in the timeline went perfectly.  As a single green clip.  If I can edit seamlessly from camera to camera.  Now I have later in the clip camera Multi and train to cut another piece in the timeline.  There are two clips on top of the other and two beds audio now for some reason any.  What makes it more of a pain to switch between camera angles.  Why it does this now?  I'm sure that this is a user error, but I don't understand what is happening and I've done it before with number.  Any information would be helpful!  A PERIOD of really bad you need a very long piece today!

  Click the icon to the left of the magnet, the title sequence of the timecode.

  (By the way, there no such thing as a multicam in PP clip that uses nested for work multicam sequences.  Clips and sequences are different.  She supposedly has a multicam sequence.)

• Problems after restarting the vAPP vCOPS

  Hey there - I am under vCOPS 5.

  I noticed that some VM indicated "no data" in their respective details panels... I read somewhere the restart of the service was the way to solve this problem...

  At the time I was not aware of the mode of command line to restart the service (from the resumption of vcops-admin Ui box), so I right click the VAPP vCOPS itself clicked shutdown, expected some time after that he had done and he turned his back.

  Tried to login using the domain name COMPLETE on the web of the said server browser is not available - redirect where possible... shortly there after it struck me to a 404 screen.

  I checked in the vSphere Client IP are different and static, I then connected the box to user interface and run a summary, he showed the VM analytics from the same Ip address... so I ran the repair tool (repair vcops-admin - XXXXXXXXXXXXX ipaddress) with the address of the VM analytics... They say "fixed" after restarting the service once again, but after another analytical perspective - showed the same thing.

  I read that in v1 vCOPS, it was a graphic incompatibility known - and ignore it.  So-what could be the problem?  Let me know (I've already checked there is disk space)

  Thanks in advance for any help!

  Leffingwell,

  Can you check how much space is left on the partition/data of each virtual machine?  the 404 error means a webservice started, but one of the DB background servers probably didn't.

  If either/data is near or at 100% full, then you need to turn off the TIME... Add a new drive... power back on.

  When you add a drive, take all the default settings... and preferably choose style Eager zero thick (runs faster than the other two).

  Best regards

  Jon Hemming

• Problem of multi-level numbered list

  I have this situation:

  I work in book, with a separate document chapter.

  My chapter number is using digital Roman.

  I want to make my multi-level list (2nd, 3rd level and so forth) use this chapter number, as normal.

  But the result is: IV.1

  Instead, what I want is: 4.1

  Can I convert this digital Roman (IV) normal digital (4)?

  What is alternatives to the list multilevel numbering restarts in each chapter?

  Any help would be appreciated.

  Thank you!

  Check out these 2 points:

  1 the document numbering options:

  Style (Document chapter numbering): must be set up as "1,2,3,4,...» »

  2. variable: chapter number:

  must be set up as "I, II, III, IV,...» »

  When you create your lists at several levels, simply add the chapter number symbol (^ H).

  It must be formatted as seen in point 1.

  Let us know if this solves your problem.

  Vinny

  

• Warehouse Builder problem (deploy - package - mapping)

  Hello
  
  I have a problem with OWB.
  
  We have both development and Test environments, and deploy us a mapping (including all objects) but when we generated the code we have a difference:
  
  Develpoment:
  
  CURSOR 'AGGREGATOR_c' IS
  SELECT 'AGGREGATOR '. ' ' CONTEO_RANGOS ' 'CONTEO_RANGOS '.
  + (SELECT COUNT ("AGG_INPUT". "RANGO_CD") "CONTEO_RANGOS" + "
  + (SELECT "TABLE_NAME". ' ' RANGO_CD ' 'RANGO_CD ' +.
  + "SCHEMA." "' TABLE_NAME ' 'TABLE_NAME ' +.
  + WHERE (EXISTS (SELECT 1 +))
  
  + FOR (SELECT MAX ("TABLE_NAME". "ACTUALIZACION_REGISTRO_DT") "FECHA_ACT_MAX" + "
  +                                                  FROM "SCHEMA"." TABLE_NAME' 'TABLE_NAME') 'AGGREGATOR_0 ' +.
  
  + WHERE ("AGGREGATOR_0". "" FECHA_ACT_MAX "="TABLE_NAME ". ("' ACTUALIZACION_REGISTRO_DT").
  
  +                                        )+
  +                              )+
  +                    )+
  + "AGG_INPUT") "AGGREGATOR." +
  
  Test:
  
  CURSOR 'AGGREGATOR_c' IS
  SELECT 'AGGREGATOR '. ' ' CONTEO_RANGOS ' 'CONTEO_RANGOS '.
  + (SELECT COUNT ("AGG_INPUT". "RANGO_CD") "CONTEO_RANGOS" + "
  + (SELECT "TABLE_NAME". ' ' RANGO_CD ' 'RANGO_CD ' +.
  + 'TABLE_NAME', 'TABLE_NAME ' +.
  + WHERE (IT EXISTS (SELECT 1 FROM (SELECT MAX ("TABLE_NAME".) "ACTUALIZACION_REGISTRO_DT") "FECHA_ACT_MAX" + "
  + 'TABLE_NAME', 'TABLE_NAME') 'AGGREGATOR_0 ' +.
  + WHERE ("AGGREGATOR_0". "" FECHA_ACT_MAX "="TABLE_NAME ". ("' ACTUALIZACION_REGISTRO_DT").
  
  +                                             )+
  +                                   )+
  
  +                         )+
  
  + "AGG_INPUT") "AGGREGATOR." +
  
  
  We have no idea how manufacturer warehouse set the schema of the table database...
  
  Any suggestion?
  
  Thank you!
  
  Kind regards
  Diego.

  OWB will not format shema.table_name use if the table is in the same module in that your mapping is. If you want to "" use this format that you define in the mapping setup--> tables--> and on the table, you set the SHEMA parameter. Now when you generate the code OWB does precede the table with schema name.

• Problem of multi Folio: I have 4 folios but I see just 2 in my folio app multi, why?

  I have a problem with my folio app multi. I'm now 4 folios create with the same Adobe ID and product ID. But on my application, I see just the first 2 folios. What could be the problem?

  At present, the application is not online on Apple's App Store, I just downloaded from the manufacturer of the Viewer to the viewer of developer to test on my iPad. Could it be the problem?

  You use the same product for different folios ID? If so, it's a problem. You must use the same product for different folios ID only if they are rendered. Otherwise, each folio should have its own product ID, usually in the form com.publisher.publication.date.

• Problem: Deployment of the server WL10.3 started as a Windows Service Instance

  Hello world
  
  I sent my J2EE Application to a stand-alone Server Instance WebLogic (in mode of development) has started from the level of command of Windows via startWebLogic.cmd. I also tested the deployment of a managed Server Environment(1 AdminServer+2 MS Servers in the cluster; development mode) cluster, all servers started from the command line. The application could be tested and everything worked fine.
  
  But:
  When I set up the WebLogic Server instances as a Windows service (as described http://e-docs.bea.com/wls/docs103/server_start/winservice.html) my application cannot be deployed at boot time.
  3 ClassNotFoundExceptions, I get:
  -at the start of the class "DMS-Startup" (oracle.dms.wls.DMSStartup)
  -at the start of the class "ODL-Startup" (oracle.core.ojdl.weblogic.ODLConfiguration)
  -at the start of the class 'Class of startup JPS' (oracle.security.jps.wls.JpsWlsStartupClass)
  
  The Service is started but under Administration Console/deployments the Enterprise Application is marked as 'New' as opposed to 'active '. Other deployments: adf.oracle.domain (1.0, 11.1.1.0.0), (1.2, 1.2.7.1) jsf and jstl (1.2, 1.2.0.1) appear as 'Active'.
  I tried to redeploy the Application directly from the JDeveloper for the autonomous WLS Runspace (one server) - as I did before.
  The deployment has failed:
  [Deployer: 149034] An exception has occurred for task [Deployer: 149026] deploy application... of AdminServer. :.
  weblogic.management.DeploymentException:
  # Incomplete deployment.
  # 25 November 2008 21:58:53
  Deployment failed
  
  Why the deployment on the WLS Instance has started from the command line and why does fail when started as a Windows Service?
  
  I am using WLServer 10.3 and JDeveloper 11 g on Windows Vista operating system - both installed via jdevstudio11110install.exe. My Web Application uses BC and ADF Faces.
  The Windows Service is configured in the following manner in a specific server under the USERDOMAIN_HOME directory script:
  Set DomainName = mydomain
  Set USERDOMAIN_HOME = C:\Oracle\Middleware\user_projects\domains\mydomain
  Set JAVA_OPTIONS = Dweblogic.Stdout =... Dweblogic.Stderr =...
  MEM_ARGS =-Xms40m - Xmx250m set
  call "C:\Oracle\Middleware\wlserver_10.3\server\bin\installSvc.cmd".
  
  And there is another problem with the Windows Service:
  I'm not able to uninstall the service to a specific server scenario, affecting first the DomainName and the SERVER_NAME = AdminServer and that
  use of the call "C:\Oracle\Middleware\wlserver_10.3\server\bin\uninstallSvc.cmd".
  I must do this directly in the registry.
  Missing something? What's wrong?
  
  Help, please!
  Thank you
  Anita
  
  Published by: user586097 on 26.11.2008 11:55
  
  Published by: user586097 on 26.11.2008 12:00
  
  Published by: user586097 on 26.11.2008 12:02

  Hello

  I had the same problem and made an SR by Oracle. Solution, in the script to create the windows service, you must add a call to the setDomainEnv.cmd before the call to installSvc.cmd.

  ..
  MEM_ARGS =-Xms512m-Xmx512m set
  call "C:\Oracle\Middleware\user_projects\domains\USER_domain\bin\setDomainEnv.cmd".
  call "C:\Oracle\Middleware\wlserver_10.3\server\bin\installSvc.cmd".
  ENDLOCAL

  It works now, Peter

• problem with multi-cam and camera angles

  Hello

  I used 3 cameras for a project with free run time code,

  I imported the files of each camera, and I have them renamed with a suffix like cam1 and cam2 cam3

  in first pro, I put a different color of the label of each camera to have an own chronology

  and when I create a multi-cam with time code sequence, I have thousands of tracks (his pro as Prime Minister understand that each item I have a different cam)

  I tried a lot of things, but I can't find a way to group each cam on a track :/

  someone has an idea for me please?

  Thank you

  Premiere Pro treats each element as from a separate camera.  No way around that.

  When you photograph of muticam, do not start and stop the cameras.  Leave them running for the complete event.  Floors and ceilings are better than trying to synchronize dozens of clips.

• deployment & multi projects of developer/workspace

  Hi im a beginner

  I would like to read about how multiple developers can work on projects involving the same apex application and how they can create a releasable version at the end of the development phase for the tests.

  at the moment I do not understand is...

  (1) can run 3 developers on their own personal workspace to work on the same application 60 page?... we can create a workspace called "development-project-a" with different user names and build on the single application?...

  1A) if we can work on our personal workspaces how do merge us the application to create a trial version?

  (2) if the generation is completed and deployed to a different environment; How deployable bugfixes of development in the test environment (partial or complete versions?)

  I'm sure that there is a guide somewhere but I can't find a

  mast

  Simple answer... You have several developers working in a workspace on ONE of the applications.  You are working on separate pages, locking these pages if necessary, so no one ELSE can edit them.

  Every night would export you a copy of the application for a product of version control, just in case someone makes a change, it causes damage.

  When you are ready to release a product, you export your application and all items necessary for test you environment database, then production.  It is NOT advisable to try to export pages when you make changes, it's a better option to export an application in its entirety...

  Thank you

  Tony Miller

  SmartDog Services

  Austin, TX

• Can I deploy multi-mvs at the same time by a single model?

  Can I deploy several similar VMs at the same time and provide information only once by model?

  information such as the name of the server = VMS001 ~ VMS010.

  I can't find in the management of model VC.

  The system is esxi4.1 + vc

  There is no way I know of to do unless you the script.

  The only product that doesn't currently which is VMWare View.  It can deploy 1, 5, 10, 100's of identical desktop machines with predefined information.

  Larry

• Problem deploying app JSF ADF on Weblogic

  How can I deployed ADF BC Application JSF on two machines
  I want deployed part of model logic business on one machine or ViewController part on another Machine
  How can we establish the same deployment descriptor and application deployed on two machines

  The first question is why do you want to split the two layers into two separate machines?
  Most of the deployment that we keep both on the same machine, and if you have two machines available for you you clusters.

  If you want to continue to do - you have to expose your AM as an EJB - see the remote section of AM properties. I think that the online help will have more information on that.